BMW e87 with Junsun 8259 8gb no car info... - Android Head-Units

So this is my problem:
Car: BMW 2005 e87 with original Flap screen working
1. I connected my Junsun Android 11 8259 8GB RAM 128GB storage to my car (I think I managed to get everything done right...). The Junsun headunit works very good, but there is no Car Info.
2. I coded my car with NCS Expert and NCS Dummy (FLAP nicht_aktiv) - triple checking everything, but still nothing in the Car Info app...
3. Today I decided to reconnect old Flap screen....but I don't get anything on that either...NOTHING...
4. Again, I decoded the ECU (FLAP aktiv), I triple checked everything...but nothing is displaying on the Flap screen...and can't get it to display on the Junsun Headunit either...
I just don't have any more ideas....
Whatever you think...I am willing to discuss it.

Related

Best headunit (Subaru Legacy IV)

Hi everyone,
My name is Max and today I bricked my headunit Nothing fancy because it was 8227l_demo with 2gb/32gb. I'm looking for the best android headunit for now. Size 9". Android 9.1/10 + DSP. Can you all recommend something for me? TEYES CC2 Plus is a good one?
szach00 said:
Hi everyone,
My name is Max and today I bricked my headunit Nothing fancy because it was 8227l_demo with 2gb/32gb. I'm looking for the best android headunit for now. Size 9". Android 9.1/10 + DSP. Can you all recommend something for me? TEYES CC2 Plus is a good one?
Click to expand...
Click to collapse
Depends on your budget. I would start with Rockchip PX6, PX5 or PX3. Just make sure it's a MTCx unit (so MCU type starts with letters MTC)
szach00 said:
Hi everyone,
My name is Max and today I bricked my headunit Nothing fancy because it was 8227l_demo with 2gb/32gb. I'm looking for the best android headunit for now. Size 9". Android 9.1/10 + DSP. Can you all recommend something for me? TEYES CC2 Plus is a good one?
Click to expand...
Click to collapse
I just took delivery of one. (3/ 32GB)
Seems very well made. According to most YouTube videos I've seen in general, it is as fast as you need it to be, no bad signs of lag and of course if you're using a phone hotspot also depends on your WiFi. It will do me TBH vs. another sim card bill.
Audio quality is reportedly a plus too (which is important obviously)
I seen 2gb units with preloaded apps loading nicely, playing USB HD video files, GPS maps.
Pic is of unit inside Astra Mk6 OEM fascia fitting you get a GM canbus decoder and another speaker unit for indicators door open warning sounds.
I suppose like most gadgets any cons will be personal and appear after spending time with it.
I will report again after I install it after holidays. I botched a couple of photo uploads. If anyone needs any pics let me know. Merry Christmas Folks.
I have to say it's a neat little device with surprisingly decent A/V quality.
All the usual apps Spotify, Netflix, Prime, YouTube work perfectly.
Just connect your Google acc for most direct main app settings.
(If Google is not a preference, Admittedly I'm not surprised)
I have all connections in place, incl. 8pin CANbus but unfortunately the CANbus decoder is not sending a signal to the CC2 plus unit.
It's a Raise RSC and a guy on YouTube told me he got a Raise RZS which works fine.
(Seller said there is NO Raise RZS only RZC)
I'm disappointed as I've said it's a good unit and a working CANbus would have been icing on the cake as I get no reaction from cd 400 control button panel, Steering wheel controls, Door open warnings, A/C display etc.
I can't think where I go from here except try a different decoder. It's a decent probability I have a non working CANbus. And I've tried a lot of attempting to connect it.
EDIT Feb 2021: CANbus issue resolved.
There was a very slightly misaligned pin in the CANbus decoder connection zone
(zone c on CC2plus)
So I straightened it as best as I thought, connected 8 pin connection from loom and now it all works fine.
Incl; Door open warning s - Original cd400 unit fascia buttons / Steering Wheel buttons - A/C display etc. So happy days.

I need help with my Junsun Head Unit!

Hi all,
I bought my first car 2 weeks ago, a Renault Clio 2014.
The first upgrade i wanted to do was a android head unit that supports android auto and apple car play. after some research i ended up with this one:
https://nl.aliexpress.com/item/1005003495893052.html?spm=a2g0o.order_list.0.0.291279d2UtKJ3v&gatewayAdapt=glo2nld
Model: PX9s 64GB 4G
€268,92
I got the radio in and it worked perfect, however i couldn't get the steering wheel volume controls to work.
After connecting the simplesoft box and pressing update on the head unit, the unit turned off and it remained this way... rip.
I think the unit is bricked. Im looking for somone who has the flash files or someone that has made a backup so i can try to restore the head unit
Keep in mind, im new to all of this.
I have found Junsun tech support to be very helpful.
Sorry I can't help any more than that.
Send it back warranty
marchnz said:
Send it back warranty
Click to expand...
Click to collapse
I just got a t&t for a new unit, however as far as i know i can keep this one, is it possible to backup the new one and flash the old one with it?
Hi,
I'm new here too. I installed a Junsun V1pro HU on a Mégane 3. The canbus decoder is also a simple soft. Steering wheel control didn't work at first. Actually something was wrong in the harness and I had to swap the position of the 2 white wire of the smallest connector linking the canbus decoder to the unit.
I hope this can help.
Jetblack
I actually am getting my new unit in today, Is there someone who can explain how to make a dump so I can try the backup on my other unit?
Is it posible to put a Other car launcher on a Junsun Android radio i have a model 8227L
hi, I have a junsun with fw ts18 2.2, loading another fw I didn't realize it was for vertical system now I can't load the right one, how do I do it.?
Hello, help. The question of such a junsun v1 car radio. The reversing camera failed. Only the black screen is on. The connection was correct. What could be the reason?When you click on the screen, brightness settings appear and nothing else. I connected another camera the same

9212B Haed Unit in BMW 1 Series (E81)

Hi
I have an Android 9212B unit fitted in my BMW 120D (E81) which I had to reset after a car battery replacement.
Now the unit does not seem to talk to the car properly, for instance it now shows kph instead of mph etc.
Looking in protocol (CAN ID) section I cannot see any reference to my car?
Does anyone have any ideas?
Thanks
Mark
P.S. car was fitted with this when I purchased it.

ISUDAR T72

Hello everyone, i'm new here and know nothing about this stuff but im learning slowly . I bought at local dealer this radio Isudar T72 10'' screen, 4GB/32GB and place it in a VW Golf 7. everything is working fine and im happy with it but every then and there after the ignition of a car audio starts but screen is DEAD.
If i press buttons on a radio after half a minute screen gets activated. Next time radio works fine and so on......
I have also replaced the radio with a new one and today this error happend again. I been told that could be some error with CAN BUS of a car and the radio?!
Does anyone have any idea what could be a problem??
Thanks and bye
Hello. Do you have it properly wired and set to MQB?
How to connect car radio for MQB car(T72)
1. Connect the cable like this photo. 2. Pls connect car radio to wifi. 3. Choose car module on setting-factory setting-123456- select module.4. Choose canbox -Raise- VW- MQB- then pubic.
www.isudar.com
If you have a defective canbus box, write to the seller to send you a new one, or contact Isudar and buy a new one, specifying that you need an MQB golf 7.
ISUDAR Car Canbus Box
For some car dvd, the canbus is necessary. What conditions need to buy it? Your car is advanced configuration: With air conditioning display. With digital power amplifying speaker. With ceiling display.
www.isudar.com
Isudar T72 has TS10 UIS7862, try searching here, maybe someone has solved the same problem:
New TS10 UIS7862 6gb ram 128gb head unit q&a's
So I bit the bullet and bought myself this head unit: https://a.aliexpress.com/_9JZiHu Ad stated that unit is 4gb ts8, but unit shipped and arrived is 6gb TS10. Plugged everything up unit works nice and smooth as expected, but one seriously...
forum.xda-developers.com
Try turning sleep on or off in the settings, page 16:
https://cdn.shopifycdn.net/s/files/1/0058/3834/0178/files/T72_2.pdf?v=1620980721
Thanks for the reply.
Just because i was affraid of this problems i took a car to this dealer who installed everything. Also as he said he never had problems and been already installing into this kind of cars. Now he sent me second radio but without canbus module. The error is the same.
My original radio didnt have separated MOB and it was all installed directly into the screen. Sleep mode doesnt affect much and its just too long to be activated every day.
Maybe we need to think also about replacing this canbus module.
I will check your links.

Hyundai Ioniq headunit - disappointed, is there something to do?

Basically this all happened a year ago but I'm asking now
I got a headunit for my Hyundai Ioniq 2018
Now my biggest disappointment is that it comes without all of the radio buttons and knobs at the bottom of the unit, like in the original. instead there is just a hole
The guy told me it's all of them, but I've looked in aliexpress and I saw units with the buttons. now I can't and don't want to order a new unit, but is there a way to add the buttons to my existing one?
also, the usbs at the bottom aren't functioning
instead they go through the glove box
the guy said that the usb connection is propriety and there is no way to do it. again I don't believe him, is there a way to fix it?
The original mic is there too, Ithink, but again he says it's not possible. instead theres an external mic that doesn't work as well
the software is annoying too, there is no way to pick favorite contacts, and it doesn't play nice with other phone apps.
I told him to install the original back, and h3 tried, but it didn't work anymore.
now I don't want to see that guy anymore.
Can I diy fix these problems?
For reference that's the unit, with the red area being the missing button area
Regarding usb and microphone it helps to have the pinout of the original OEM radio:
Junsun V1 MTK8259 - the adapter battle (Kia Ceed Jd) / OEM camera usage / reference thread
I bought the Junsun V1 head unit but my Kia Ceed JD had a OEM nav unit which isn't directly compatible to Junsun V1. So I re-wired the wiring harness based on the pins description of my original OEM navigation unit. I'm only modifying the wiring...
forum.xda-developers.com
The are frames to cover the hole.
These are the specs, from what I understand its not mtcx so there is not much I can do with it?
Android version
10
Hardware Information
B200- Core 8- ROM 64GB - LPDDR4-RAM 4GB-1024x600 - ID1
Car
Kernel Version
4.9.117+ #170 Tue Jun 14 09:36:06 CST 2022
tings
OS Version
IL1G0104-P10- 2.1.2-20220614-R03-A01-N4
Reset
MCU Version
STM32 -20220607-11-BD2

Categories

Resources