Related
I am running Windows 7 x64 I have no idea if following this guide on another operating system will work, this is just a step by step of EXACTLY how I did this, Not to say this is the only way. I have tested other methods and I have put in different variables and I have successfully gotten it to work several times in a row doing it this way while following jp4756's guide. I am sure this is not the only way to accomplish root, however this worked for me perfectly. PLEASE don't skimp out on any step. There is no shortcut here just follow the steps and jp4756's guide to the TEE!!!
Step 1.
Uninstall pdanet/htc sync/ any other thing you installed to get all this to work before
Unplug phone from computer usb cables and have phone powered on and in settings menu
Step 2.
download USBDeview(install it) easy to google it
download HTC SYNC(do NOT install it yet) for mytouch slide easy to google it
Step 3.
While in settings menu go to Application
go to Development
and check the box USB debugging
Step 4.
In settings go to Connect to PC
touch Default connection type and choose Sync
At this point you have the phone not plugged in, you have the setting on the phone changed, you have dowloaded usbdeview and installed it, and have htc sync dowloaded
Step 5.
Start USBDeview(some may have to right click the exe and run as administrator) and delete all android drivers and mytouch drivers, anything relating to android
Install HTC SYNC and let it completely install
Step 6.
Plug phone into computer and let the computer auto install drivers etc...
Step 7.
turn the phone off. Power on the Slide into the bootloader by Holding Down ( Volume Down + Power Button ) After it does its little thing your computer will beep and start auto installing drivers and stuff
Step 8.
If everything has gone according to plan in Device Manager it will show Android 1.0 or w/e with a exclamation point. Right click on that and choose Update Driver Software
2 options pop up choose Browse my Computer
then choose Let me Pick from list...
a list will appear giving lots of choices
choose Android Phone should be the first choice that says android....
then 3 options will appear, choose the 3rd one that has Composite in it and choose okay.
Step 9.
Now select Recovery from the bootloader menu
after it is done doing its thing completely 2 things will happen
1) In device manager you will now have something under disk drives
2) USBDeview a new driver will pop up at the end of the list, something like this:
Port_#0004.Hub_#0004 T-Mobile myTouch 3G Slide USB Device Mass Storage Yes No No No E: HT05RPS05696 6/16/2010 4:00:58 PM 6/16/2010 4:07:35 PM 0bb4 0ff9 08 06 50 USBSTOR USB Mass Storage Driver USBSTOR.SYS USB @usbstor.inf,%generic.mfg%;Compatible USB storage device
Step 10.
This new driver to appear shows Yes under the Connection column. This needs to be disabled. Right click on it and choose Disable Selected Device
after about 10 seconds it should no longer say Yes under connection column, if this does not happen then you are not running it under Admin.
Okay so now you are literally almost freaking there.
Step 11.
Now basically all you have to do is follow jp4756's guide starting with step 5. Im going to assume you already understand steps 1-4 in his guide. And you already have the package listed in his guide as well. You have already put those files where they belong
Step 12.
Okay so we are basically following his guide now. first things first
5. run the update.zip it will fail(MUST DO)
6. now in cmd type adb reboot recovery (don’t press enter)
7. in the recovery hit reboot system now( once it starts rebooting run that command rapidly untill back into recovery) <--- Basically while the phone is rebooting you are just hitting up arrow enter up arrow enter up arrow enter up arrow enter in CMD. You will know when you can stop when the CMD freezes for a sex, computer makes beeping noises and the phone reboots basically. It is headed for recovery and we must switch our command now
8.type adb devices(if it says nothing repeat the steps, if it says offline unplug it and then plug it back in, if it says recovery your fine) <---- Basically after you know its headed for recovery you change command to adb devices and you repeat previous procedure, up arrow enter up arrow enter up arrow enter etc.... I did not use loop, i did this all manually.
This may take a few tries, if it does not show offline then go back to step 6 rinse and repeat. You go back and forth just a few times and you will have it. Literally within about 3 tries you should accomplish the annoying goal of having offline stay there.
My job is done, follow guide and continue on your quest for root
There is no guarantee this will work for everyone. I am not claiming that this is 100% Im just giving an explanation as to how i got it and what might have been causing everyones trouble. Results may vary
Thank you to all the devs who made this possible and jp4756 for his wonderful guide
Wow that is just way to much stuff there...
I've ran loop on 2 totally different Computers running 2 totally different OS's and running 2 totally different Drivers, I have no problems with either one..
1st: XP sp3 32bit w/ PDANet Drivers <--- Only ones that I could get to load, Forcing drivers wouldn't work in XP... also like I said before, make sure to close the PDANet Program in the Toolbar.. Also make sure to read the directions when installing PDANet...
2nd: Windows 7 64bit w/ Htc Drivers <---PDANet Drivers also work... You have to force the HTC Drivers in Devices Manager..
I think most people are having this problem because they aren't doing the USB Debug thing. But could be Wrong.
Also a side note my phone is running the USB Drive and not SYNC works just fine...
Also It just might be your computer so I would try and use a different one if you can.
jnight666 said:
Wow that is just way to much stuff there... I don't see how anyone has a problem with loop.
I've ran loop on 2 totally different Computers running 2 totally different OS's and running 2 totally different Drivers, I have no problems with either one..
Also It just might be your computer so I would try and use a different one if you can.
Click to expand...
Click to collapse
Sorry that we all can't be as cool as you jnight666, but some of us are having real problems with no apparent explanation. I am an IT professional with access to every kind of computer used in the modern world, and trust me, I've tried all the ones that apply. Rubbing it in our faces that it was just so easy for you is just rude.
THE DRIVER MAKES NO DIFFERENCE FOLKS. IF YOU CHANGES DRIVERS AND THEN IT WORKED, IT'S PURELY A COINCIDENCE. PEOPLE HAVE GOTTEN THIS TO WORK ON MANY DIFFERENT DRIVERS.
THE CONNECT TO PC SETTING ON THE PHONE DOES NOT MAKE A DIFFERENCE IN FASTBOOT/RECOVRY FOLKS. IF YOU CHANGED THIS SETTING AND IT WORKED, IT'S PURELY A COINCIDENCE. PEOPLE HAVE GOTTEN THIS TO WORK ON VARIOUS DIFFERENT SETTINGS.
That being said, this didn't solve mine. I still cannot root.
And Yes, my cap locks was on purpose.
Okay, please dont come in here and start telling me how my method is wrong. I already stated there are other ways to accomplish it. I had already stated that this isnt 100%. I am merely offering an exact procedure that i duplicated SEVERAL times, with it working for me every time. If this isnt how you accomplished it then pls, theres no reason for you to be in this thread posting negative comments.
With that said fermunky, did you follow the procedure to the tee? - btw im not assuming anything so please dont take it personal. Im just trying to help ppl : )
My caps wasn't to be negative. There are too many people claiming the drivers were a key. And I am not saying yours said this, but it also doesn't clearly say it doesn't. That is all.
Completely understandable, and definitely no disrespect to you or anyone here
When I disable the Mass Storage I see other items in USBDeview that reference the Slide. I end up in a loop after rebooting and rapidly entering adb reboot recovery. I was seeing everything as your instructions explained.
Do you think it is worth a shot to disable all but one item for the Slide? Any suggestions would be greatly appreciated. I work in an IT Escalation Group and this has to be one of the toughest nuts I have tried to crack! LOL
Thanks,
jnight666 said:
Wow that is just way to much stuff there... I don't see how anyone has a problem with loop.
I've ran loop on 2 totally different Computers running 2 totally different OS's and running 2 totally different Drivers, I have no problems with either one..
1st: XP sp3 32bit w/ PDANet Drivers <--- Only ones that I could get to load, Forcing drivers wouldn't work in XP... also like I said before, make sure to close the PDANet Program in the Toolbar.. Also make sure to read the directions when installing PDANet...
2nd: Windows 7 64bit w/ Htc Drivers <---PDANet Drivers also work... You have to force the HTC Drivers in Devices Manager..
I think most people are having this problem because they aren't doing the USB Debug thing. But could be Wrong.
Also a side note my phone is running the USB Drive and not SYNC works just fine...
And if anyone want to say anything about this I'll go load up my Pentium III machine and see if it works on that...
Also It just might be your computer so I would try and use a different one if you can.
Click to expand...
Click to collapse
3 different computers 3 different op systems installed uninstalled drivers different programs etc...some phones are hard to root its a ambiguous situation
Yeah sorry I wasn't trying to be rude.
I was just trying to be helpful, sorry if it came out that way...
I also have the loop not working issue but i usually only happens once or twice..
I feel your pain I had trouble with the push Update.zip part of this thing and I was trying it for hours...
I was just trying to tell you what worked for me...
If you tried different computer and still no luck then im guessing its the Phone that is the issue or the USB Cable...
gofizzle said:
When I disable the Mass Storage I see other items in USBDeview that reference the Slide. I end up in a loop after rebooting and rapidly entering adb reboot recovery. I was seeing everything as your instructions explained.
Do you think it is worth a shot to disable all but one item for the Slide? Any suggestions would be greatly appreciated. I work in an IT Escalation Group and this has to be one of the toughest nuts I have tried to crack! LOL
Thanks,
Click to expand...
Click to collapse
You definitely don't want to do that, as one of them is one that you need to be connected once you finally get to see offline stay. Are you rebooting using the method described in jp4756's guide? meaning your rebooting using the recovery option reboot, then in command doing the adb reboot recovery, then once you no the phone is gonna boot into recovery you switch to spamming adb devices? When you say your in a loop it sounds to me maybe your not doing the adb devices after the phone listened to your adb reboot recovery command
Followed your instructions...
No ! next to anything in device manager. Right clicked on Android Phone > Android ADB Device and went to properties to update the driver. Nothing in the HTC folder would work, they both said that they weren't applicable for the device...(this was in C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64)
before plugging your phone into your computer a single time, can you confirm that you started up USBDeview and uninstalled every single driver related to android, or mytouch or htc etc... Also before ever plugging your phone in a single time did you install htc completely?
Code3VW said:
Followed your instructions...
No ! next to anything in device manager. Right clicked on Android Phone > Android ADB Device and went to properties to update the driver. Nothing in the HTC folder would work, they both said that they weren't applicable for the device...(this was in C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64)
Click to expand...
Click to collapse
Right Click Android Phone - Properties - Driver - Update Driver - Browse My Computer - Let me pick from a list of device drivers (click this, don't give it the path in the upper box) - Have Disk - Browse to yours C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64 - click androidusb.inf and select Open - OK - Unclick Show compatible hardware - Select "T-Mobile myTouch 3G Slide" - Next - All Done.
after getting some sleep and starting fresh, i tried this method again this morning. on the fourth or fifth try i got my slide to stick in offline mode. so then i unplugged it and plugged it back in to get into recovery. lost it, and now im on my 50th or so try to get it back to offline mode.
i need a stiff drink lol
it seems partially a driver issue and also an adb issue i thinks. it connects 'when it feels like it'
i'll report back if i make any progress.
btw im doing this on XP Pro SP3 fully updated
edit: I also noticed when adb does catch the slide, 2 instances of adb are running, then one closes and loses the phone. maybe this will help solve some of the problems
You've misunderstood that post. Only one instance of ADB will show when the loop is not running. Once you start the loop, another instance of ADB will show up and disappear many times. This is normal. As long as only one instance is showing before loop, you are fine.
fermunky said:
My caps wasn't to be negative. There are too many people claiming the drivers were a key. And I am not saying yours said this, but it also doesn't clearly say it doesn't. That is all.
Click to expand...
Click to collapse
I would just like to say that I have followed every method listed in these forums, achieved root the first try (using the updated update.zip). My problem occured when flashing the eng rom, I lost clockwork,root and now the phone runs like sh!t. Yes, superuser was installed and yes my pc no longer recognizes the phone when searching for adb devices after pushing the first 2 files from the eng flash walkthrough.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
mtjnkee said:
I would just like to say that I have followed every method listed in these forums, achieved root the first try (using the updated update.zip). My problem occured when flashing the eng rom, I lost clockwork,root and now the phone runs like sh!t. Yes, superuser was installed and yes my pc no longer recognizes the phone when searching for adb devices after pushing the first 2 files from the eng flash walkthrough.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
maybe your downloads were corrupted. that's really strange...
man, that really sucks! I am truely sorry...
after spending 20 hours or so on rooting, I really feel your pain.
After I reboot into recovery mode and then use adb to check for my device I never get it to show up. Just so I am clear when you say 'spamming your device' you mean after reboot and rapidly entering the reboot recovery command, then looking for device with adb devices command. I never get it to show.
Thanks for the reply!
No devices in adb?
So I had this same problem with my MT3G. Type in "adb devices" kills the last device and it lists connected devices and NONE were listed. Not sure exactly what I did, but did eventually get it working. (I was trying to use the emulator)
Now though I'm having the same problem with my wife's MTS. Any ideas?
Hello this is my first post. I have searched the threads and internet for answers but I have not been able to find a solution.
I have been customizing my phones since the days of baked black bean on my galaxy S1, but I am no expert at this stuff. Until about a week ago, I was happily running RR on the OPO (great ROM) but it has gotten a bit slow so I figured it was time to get a OP5.
When I boot into fastboot, my device is recognized with the command fastboot devices. My phone showed the following:
fastboot mode
product_name - QC_Refernce_Phone
VARIANT - MSM UFS
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - c7ccda2
SECURE BOOT - yes
DEVICE STATE - locked
When I ran fastboot oem unlock, CMD prompt shows FAILED, however, the option to unlock the bootloader shows up on the OP5. I go through the process and wipe data. My phone now shows that it is unlocked, and I go into developer options to get advanced reboot/USB debugging/verify OEM unlock is still enabled. When I go back to fastboot, I am unable to flash TWRP. I have now seen a number of errors, usually:
FAILED (remote: Requested download size is more than max allowed) or target did not report max download size, or command write failed (no error). I have tried installing 4 different versions of ADB/fastboot from different sources, and I have tried TWRP cheeseburger 46, 58, and 62. I have also tried two different USB ports and 4 different USB drivers.
Does anyone know what could cause these issues or how to get TWRP installed? Any help would be much appreciated. I really want to get rooted and get substratum running.
hmm
did you type fastboot devices to check that u got connection ? do you have another pc to try ? another usb port
edit: also try disable developer option and aplly it again with oem unlock tapp
EDIT2: if you cant still get it work you can try
Advanced settings -> Backup & reset -> Reset all settings and after that unlock bootloader
I was able to solve this by using a friend's laptop and installing the drivers and abd. Worked like a charm and I was able to flash magisk for root.
For anyone else having this issue, try another pc if you can. I'm guessing this was either an issue with adb on my machine or a problem with the device drivers.
bro do u find solutions for this
I found an actual fix for this problem. Basically I had to download Large Address Allocation Tool (LAA) which you can find online. I would link to it but I do not have the website handy.
I found this solution after soft bricking my phone by installing Oreo (I don't suggest using VPN to pretend you are in Canada. Just run the beta or wait for the US release).
Essentially, you just need to run this tool on your adb.exe. From what I understand, the issue is just that adb is not using enough RAM. I think you'll need to be running Windows 7 64bit with at least 4GB RAM. I hope this info can help someone else!
jsnell said:
I was able to solve this by using a friend's laptop and installing the drivers and abd. Worked like a charm and I was able to flash magisk for root.
For anyone else having this issue, try another pc if you can. I'm guessing this was either an issue with adb on my machine or a problem with the device drivers.
Click to expand...
Click to collapse
Ever since i ditched windows and went with ubuntu i have not had one single driver issue, not one single hiccup on anything. It's been two months.. I'm never going back. lol. Every time I use adb and or fastboot it always works.
First of all, I would like to point out that the XDA Developers website has made this problem harder than it needed to be. This post is originally from Stack Exchange, but people said I would have more luck here with this problem. But every little thing I do it a problem. Try to use a proxy on the website? Nope. Try to post this in the Samsung Galaxy S7 section, where it's SUPPOSED to be? Nope. I know it's all to prevent spam, but I mean come on. Be a little lenient here. Anyways, I'm done with my rant. Back to the post.
I have made the mistake of trying to root my phone. Which is fine, but it's a lot more complicated than I thought it was, but since I have asperger's, once I start something, I feel like I have to finish it.
I have a Samsung Galaxy S7 (SM-G930U) with Sprint. I've heard that these phones are EXTREMELY difficult to root. Some even call it impossible. But I can at least try.
I ended up getting tunneled down a endless loop of tasks to complete before I actually root my phone, for preparation. One of the things I must complete is I have to install a TWRP Recovery Image in case of failure. But in order to do that, I have to unblock the bootloader.
To do this, I am using Platform Tools, with includes ADB (Android Debugging Bridge), and Fastboot. I connect my phone to my PC via USB cable, open the CMD, and type:
adb reboot bootloader
Once I do this, my phone reboots into the bootloader, just like it should. Normally, the next step I would take would be to type in:
fastboot oem unlock
When I do this, I am left with the message:
< waiting for any device >
I'm assuming that means that it's not detecting my phone at all. It's odd though, because it was able to detect my device perfectly fine whenever my phone was booted normally, but when I go into the bootloader, it doesn't detect my phone anymore.
After hours of searching around the internet, I found that a potential problem could be the drivers of my phone that are installed on my PC.
Sure enough, if I open up the Device Manager, when in the bootloader, under Universal Serial Bus Controllers, I found the driver "SAMSUNG Mobile USB CDC Composite Device", with a little yellow arrow next to it on the icon.
If I double-click on the entry, in the "Device Status" box, it will say:
This device cannot start. (Code 10)
An invalid parameter was passed to a service or function.
Code 10 means that Windows is saying "There's a problem, but I don't know what." And well, I'm stumped by this.
The drivers work perfectly fine if I'm booted normally, which is why I'm confused. In the meantime, I'll continue my rampage across the internet for a solution to this problem that actually WORKS.
If you're wondering, I using Windows 10.
TheEthanMaverick said:
First of all, I would like to point out that the XDA Developers website has made this problem harder than it needed to be. This post is originally from Stack Exchange, but people said I would have more luck here with this problem. But every little thing I do it a problem. Try to use a proxy on the website? Nope. Try to post this in the Samsung Galaxy S7 section, where it's SUPPOSED to be? Nope. I know it's all to prevent spam, but I mean come on. Be a little lenient here. Anyways, I'm done with my rant. Back to the post.
I have made the mistake of trying to root my phone. Which is fine, but it's a lot more complicated than I thought it was, but since I have asperger's, once I start something, I feel like I have to finish it.
I have a Samsung Galaxy S7 (SM-G930U) with Sprint. I've heard that these phones are EXTREMELY difficult to root. Some even call it impossible. But I can at least try.
I ended up getting tunneled down a endless loop of tasks to complete before I actually root my phone, for preparation. One of the things I must complete is I have to install a TWRP Recovery Image in case of failure. But in order to do that, I have to unblock the bootloader.
To do this, I am using Platform Tools, with includes ADB (Android Debugging Bridge), and Fastboot. I connect my phone to my PC via USB cable, open the CMD, and type:
adb reboot bootloader
Once I do this, my phone reboots into the bootloader, just like it should. Normally, the next step I would take would be to type in:
fastboot oem unlock
When I do this, I am left with the message:
< waiting for any device >
I'm assuming that means that it's not detecting my phone at all. It's odd though, because it was able to detect my device perfectly fine whenever my phone was booted normally, but when I go into the bootloader, it doesn't detect my phone anymore.
After hours of searching around the internet, I found that a potential problem could be the drivers of my phone that are installed on my PC.
Sure enough, if I open up the Device Manager, when in the bootloader, under Universal Serial Bus Controllers, I found the driver "SAMSUNG Mobile USB CDC Composite Device", with a little yellow arrow next to it on the icon.
If I double-click on the entry, in the "Device Status" box, it will say:
This device cannot start. (Code 10)
An invalid parameter was passed to a service or function.
Code 10 means that Windows is saying "There's a problem, but I don't know what." And well, I'm stumped by this.
The drivers work perfectly fine if I'm booted normally, which is why I'm confused. In the meantime, I'll continue my rampage across the internet for a solution to this problem that actually WORKS.
If you're wondering, I using Windows 10.
Click to expand...
Click to collapse
I am having similar problems with my Galaxy S7. In order to make any significant changes, the bootloader MUST be unlocked FIRST. Hence, the dilemma, if you can't make changes without an unlocked bootloader, and you can't unlock the bootloader, what can be done.
As far as I know Samsung devices simply don't have no fastboot support. Refer to Odin flashing tool instead.
Hi all,
:crying: - Looking for a way to get my Mi Note 2 back to life!
This device has never been unlocked or ROMed before (although it has been re-flashed successfully via Xiaomi's own pushed updates).
It is running MIUI 10.0.something (cannot access menus to verify exact).
The problem
----------------
I did a standard factory reset on the phone.
Once restarted, it takes you through the normal setup screens such as 'language', 'region', 'wifi network' after which I am given the option to select "copy your data from an old phone" or "set up as new", no matter which I select, my phone goes to the next screen which shows "Checking for updates". Here it stays - endlessly...
What have I tried?
----------------------
I have tried a different wifi network but it does the same.
I have also tried selecting "copy your data" instead of "set up as new" but it does the same.
Thoughts
------------
I thought I would try to install a new stock ROM to see if that would fix the issue. However, in order to unlock with the Mi bootloader unlock tool (and then use their flashing tool), apparently to do this, I need to enable something under developer options - clearly impossible when I cannot get to any android menus.
The phone *can* be re-started into the fastboot screen but does this help me at all?
On the MIUI website I noticed the following in the tips and tutorials forum: How to install a MIUI update without unlocking the bootloader: https://en.miui.com/thread-3852597-1-1.html
The above got me slightly excited before I realised that I have no way to place a ROM into the ‘downloaded_rom’ folder in the internal storage of my device (as the article instructs). Note that the reason for this (on my phone at least) is that although a Windows explorer window does open when I connect the phone to my laptop, it is empty (i.e. you cannot see any files/folders in it). BTW - I know what causes that specific issue as that bug was present in the device ages ago - basically, the phone seems to default to be in USB charge mode and in order to see the folders in Windows Explorer, you have to go into developer options and manually change the USB mode and then change it back to MTP mode. Once that is done, you can see the files/folder structures. However, I cannot get to any developer options as I cannot get to Settings at all.
What can I do?
------------------
So my burning question is this: How can I re-ROM this theoretically 'working' device, given the above constraints?
Is there any way to do anything while the phone is in the fastboot mode perhaps?
Is there some method maybe used to recover a bricked device that I could employ here?
Thank you for any help offered!
Cheers!
So my nephew brings me his galaxy s6 t-mobile phone... He forgot his lock pin so he factory reset it. Now he can no longer get into the phone because he doesnt know the correct email or password. I did some digging through the net watched a few videos... and found none of the methods they used to bypass the lock would work on his phone. Then I read about the Combination Rom (Factory Binary)... At this time I do not have any windows pc's and my VM will not read the usbs of the phone... (im not that experienced with vm to set this up) So i grabbed JOdin for linux and proceeded to try to flash the binary. However, JOdin did not work for me. So i found Heimdall and installed to learn that i had to find some weird way to run it as SU for it to work... Tho Heimdall worked like a charm.... With Heimdall I had to take the rom and completely extract it to a folder and find all the img files in it to install on heimdal like sboot, boot, cm, system, and quite a few others as well.I used the "PIT" file from the combination rom (which came in the download). When done installing the phone boots into Factory Binary... Interesting little rom... From here you can access settings, tho the instructions tell you to enable developer options and turn on usb debugging... in this rom they are set on by default i believe, so that was kind of a waste of time... then from the main menu you click the icon that looks like a calculator and type in "*#0808# where you are then presented with usb options. Select the last one on the list with adb at the end of it, click save and reboot. At this point I thought i was supposed to install the stock rom back (that was where i was lost) however all you have to do is let it boot back to binary. After it has reloaded... plug it into the pc and send it the proper adb instructions to disable frp lock. Techeligible has a batch file for use in windows, however if you dont have windows like me that does no good... So I went into the batch file with a text reader and extracted the information i needed ( 3 adb commands).In terminal i made sure my adb and fastboot were updated and working. I learned that when you type "adb devices" it will show the phone and if it says nothing else you are good to go. However it may give you a problem with permissions. If this is the case then unplug and make sure usb debuggin is on, you can also check that the adb is enabled again by doing the *#0808# command again and make sure the last selection is checked. When all is in order... At first I thought all commands must work for it to succeed... However this is not true at all. Only one of the adb commands will not give an error and at that time you can reboot into download mode and install the stock rom back on. After installation the phone will reboot and FRP Lock is no longer on... Now you can go into settings open up developer settings (tap build number till it unlocks) and select "OEM Unlock" and turn it on. Make sure usb debugging is on and you can boot back into download mode and install TWRP without a hitch.
I tried installing a couple of custom roms, however I have had no success with getting one to boot. (always stuck in boot loop even with wipe or factory reset) so I gave up and left him with the stock rom. If anyone has any idea of how i could get passed the bootloop maybe i can try again for him sometime and see how he likes various custom roms, but now he is happy he has his phone back working and it only took me a week of off and on frustration to figure it out... Hope this helps someone... (please dont ask for links) but if you do need help or have questions feel free to ask.