Hi!!
I have an audio car player model TS9 with android 10. It worked fine until 4 days ago.
Actually when I turn on the car, the unit stucks in android logo. (Like the photo)
I tried put an update in fat32 usb, but isnt read by the unity.
I think that this maybe work in recovery mode but I dont know how to enter in this model.
Can you help me pls?
Related
Hi brothers
I have bought an car head unit (uniway ADZ9071 ) and it works just about 5 min.
Next day i start my car and the device stuck in the android logo .
i do not know how to go in recovery mode because it have no power or volume bottom.
please please help me.
I try to install a new freamware but the problem that my computer do not find the device when i connect it with USB port.
with all my respect
:fingers-crossed::fingers-crossed::fingers-crossed:
YahiaSa said:
Hi brothers
I have bought an car head unit (uniway ADZ9071 ) and it works just about 5 min.
Next day i start my car and the device stuck in the android logo .
i do not know how to go in recovery mode because it have no power or volume bottom.
please please help me.
I try to install a new freamware but the problem that my computer do not find the device when i connect it with USB port.
with all my respect
:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
You don´t have OTG at your device, so it is no wonder that you are not able to connect it by USB.
First of all, you should use the RST-Button on the right side, may be that is enough to get it working again.
Don´t use other firmware as original. You got an alwinner unit and you may brick it otherwise.
I Have try it but it still stuck on Android logo.
Hello! I recently purchased a navigation for my Golf 5 2008, it's a mekede 188l 8227L but i have an annoying problem...it's not keeping settings, if i make a change on the screen, idk, the wallpaper for example, after restarting it(removing the key from the ignition) and powering on, the settings are like defaults...even the language setting are resetting....what can i do?
And also i have a problem with the parking sensors...i have installed the rear camera, it works when i put ihe car in reverse mode but the sensors are not working, it's not displaying anything.
Thanks!
Hi, I think the wiring is wrong u use the ignition line but you must use the battery line to have continuous power. Sry for my bad English I hope u understand a little bit.
The ignition line is to power/boot up the head unit the battery line is to keep little bit power for the standby.
Regards
Aggro82
Okay, but if i connect those wires, it will drain my battery?
Connect the yellow wire to the battery 12+ constant, and the red wire to the ignition (Acc) wire
hi
i have the same problem
DO NOT connect the car radio to the battery
this is not a solution
the problem you have is the Firmware 100%
ask the seller for another firmware or try this
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm...14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm...14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm...14913e5fbGNit4
if you still face the same problem i will send you a firmware but have another launcher
fast and nice
i use it now and everything is ok expect the car info because i have seat altea
eithar.metal said:
hi
i have the same problem
DO NOT connect the car radio to the battery
this is not a solution
the problem you have is the Firmware 100%
ask the seller for another firmware or try this
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm...14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm...14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm...14913e5fbGNit4
if you still face the same problem i will send you a firmware but have another launcher
fast and nice
i use it now and everything is ok expect the car info because i have seat altea
Click to expand...
Click to collapse
Hello. My name is Cristi . Can you send me origilal firmware because I deleted the preloader, boot, and all of the partition? Now my head unit is bricked. [email protected]
sharkyslro40 said:
Hello. My name is Cristi . Can you send me origilal firmware because I deleted the preloader, boot, and all of the partition? Now my head unit is bricked. [email protected]
Click to expand...
Click to collapse
Hello, Please i want firmware to upload my car radio from 8.1 to 10
the reference in attached file.
Thank you
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
@rafaelreis said:
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
Click to expand...
Click to collapse
Completing the above information.
My android unit is Seicane 2din 10.1 "Android 8.1" Model sp9853l_1h10_vmm
Model: sp9853l_1h10_vmm
Android Version: 8.1.0
RAM: 1 GB
ROM: 16 GB
Build Number: K4001_NWD_S212701.20181213.15240009.N0026.01
Screen: 1024 * 600
Guys, I got the android update with the Chinese, everything is working normally. But I still can't get into the advanced fastboot recovery mode of Android, but I don't know the reset button (RST) combinations to display.
For those who need help have a Russian site https://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=seicane&x=18&y=13 with all the information of this android unit.
Chinese update link: http://download.seicane.com/doc/80/....0.3d903e5fWaVqTw&file=H6android8.1update.zip
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
@rafaelreis said:
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
Click to expand...
Click to collapse
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
C75 said:
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
Click to expand...
Click to collapse
@C75 I downloaded the file, I'll try again, but I'll try the new firmware in a few months, because I'm on a business trip, thanks for sharing.
Hello, here is currently I have a problem with my monitor, Avin 10.25 PX6 8.1 I have a message NO SIGNAL that appears at boot nothing did I tried USB it is not detected, I was told about the SOM, i eeseyer to do some research on the internet but there is not a lot of information on the creation of a OTG USB to enter recovery mode I would like to have your opinions I made a video of the problem if you needed more of information do not hesitate. Thank you
Check this out, if this is the unit you have.
https://github.com/chinesebmwheadunits/chinesebmwheadunits.github.io/wiki/Recovery
Is there also a way for Android 10 PX6 Devices ? I have flashed a flasches Rom on the weekend and now it still responds to touch bedinung but shows only stripes on the display.
Here you have recovery files I got from chinese store AUTOTOP when asked from another account (on which they havent blocked me)
Android 8.1 with "bmw os 1.09"
BMW-8227L_demo.zip
drive.google.com
There are instructions how to proceed recovery but shortly: You have to format pendrive to fat32 and put folder CKXUPG on it. Like for example E:\CKXUPG\~files that are in CKXUPG~. Then You should plug that pendrive in one of USB cables from radio (I dont remember which one, I tried both till success). There is a reset button on left side of radio that you can use for trying another cable, you dont need to unplug car battery or whatsoever
There is no newer version than Android 8.1. All androids 8+ works worse than this one and are faked androids 10....
I also have version of "bmw os 1.26 with fake android 10":
BMWID6_OS_1.26--10.0.zip
drive.google.com
and version "bmw os 1.31" but I think i didnt manage to update to that version:
XRC_BMW_OS_1.31.zip
drive.google.com
p.s. from what I remember if everything is OK there should be some console output running in left top corner right few seconds after booting. If it doesnt happen you get stuck on bootlogo and have to reset device.
BTW. dont try to use Media button or "Your BMW tab" untill you configure headunit in factory settings (few times click on android version and then inserting 8888 code. If you dont have CCC/CIC and you selected wrong options the headunit is trying to display signal from CCC/CIC and you're basically stuck.
hello do you have the mcu update please cordially