Database Users

Need help resting my head unit

Hey guys
My car head unit is from royal for hyundai elantra and it's stuck on the starting Android logo and can't get past it so can you please help me fix it? Thank you

No one has any idea on how to fix it?

Yasser_Atyah said:
No one has any idea on how to fix it?
Click to expand...
Click to collapse
It is probably in a boot loop. What did you install or do to get it in that boot loop?
If you didn't do anything, you might try to rest the unit or disconnect if from 12V and wait at least 2 hours.
And edit your first post to change the title. I assume it is "resetting" and not "resting"

surfer63 said:
It is probably in a boot loop. What did you install or do to get it in that boot loop?
If you didn't do anything, you might try to rest the unit or disconnect if from 12V and wait at least 2 hours.
And edit your first post to change the title. I assume it is "resetting" and not "resting"
Click to expand...
Click to collapse
1- no I didn't do anything to it. It was working perfectly and I had to switch the car off and then turned it on the boot loop issue started.
2- how do I disconnect it from 12v? Sorry but I am have zero experience when it comes to cars.
3- and you are right it's resetting but I have no idea how to edit the title of thread.

Yasser_Atyah said:
1- no I didn't do anything to it. It was working perfectly and I had to switch the car off and then turned it on the boot loop issue started.
2- how do I disconnect it from 12v? Sorry but I am have zero experience when it comes to cars.
3- and you are right it's resetting but I have no idea how to edit the title of thread.
Click to expand...
Click to collapse
2- Get it out of the dashboard and disconnect the harness or the power plug or take the fuse out.
3- like I said. Edit the first post. It will also make the title editable.
Do you have a small reset hole in the front of your unit? If so, try to reset it with a "pointy" thing like a needle or something else.

Try what surfer63 says, because he has way more experience than most of the people about Android Head Units on this board. If all else fails try what I did after having a bootlooping HU for nearly 4 months :S
Had the same issue. The HU (with 2 USB ports) was some unknown brand called Funrover loosely based on Joying firmware. What worked for me was
- Download the suitable Joying firmware : joyingauto.com/blog/post/joying-intel-sofia-android-car-stereo-software-update
- Extract it on the PC and then copy the firmware files on to a freshly (FAT32) formatted USB drive
- Plug in the USB drive to your HU USB port (1?)
- Since your HU is already bootlooping, plug in a keyboard and use the following key combination> Alt + Print Scr + tapping i (or e, both worked for me) to get in to recover
- Ideally the recovery option will detect the plugged in USB and start reflashing the firmware so that you will be able to use the HU again.

black screen problem on Car Radio 2 din multimedia player Seicane Android 8.1 10.1 in

Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075

@rafaelreis said:
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
Click to expand...
Click to collapse
Completing the above information.
My android unit is Seicane 2din 10.1 "Android 8.1" Model sp9853l_1h10_vmm
Model: sp9853l_1h10_vmm
Android Version: 8.1.0
RAM: 1 GB
ROM: 16 GB
Build Number: K4001_NWD_S212701.20181213.15240009.N0026.01
Screen: 1024 * 600
Guys, I got the android update with the Chinese, everything is working normally. But I still can't get into the advanced fastboot recovery mode of Android, but I don't know the reset button (RST) combinations to display.
For those who need help have a Russian site https://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=seicane&x=18&y=13 with all the information of this android unit.
Chinese update link: http://download.seicane.com/doc/80/....0.3d903e5fWaVqTw&file=H6android8.1update.zip

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.

@rafaelreis said:
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
Click to expand...
Click to collapse
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.

C75 said:
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
Click to expand...
Click to collapse
@C75 I downloaded the file, I'll try again, but I'll try the new firmware in a few months, because I'm on a business trip, thanks for sharing.

Are there any UK based head unit repair experts

Hi is there anyone on these forums that can repair one of these chinese units
I have one of these https://www.ebay.co.uk/itm/384770479698 in my 2006 Merc. its a MTK8667 Android 11 based unit. FF_866X is the device name, i'm sorry I do not know the MCU
I was sent some update files from the seller https://we.tl/t-UeDC40i6Ul XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223
during the update process it copied the superimage ok but then something came up in red but it came up to a kind of recovery and said erasing... it then rebooted it gets to the car logo screen, before android screen then goes to a blank screen with the following in bottom left corner...FASTBOOT MODE and wont go any further
I have pressed RST then two fingers on screen until i get "detected" but all i get is the same fastboot mode again,
I have redownloaded and extracted the firmware and reformatted my usb drive to fat32 and tried the whole process again and tried in both usb slots but no sucess.
I have obtained other mtk8667 firmware files 8667.bin and 8667.upd from this topic https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/ on this forum but I have tried many different ones and it just wont read the usb, still just goes straight to fastboot mode....is anyone able to help me I have messaged the seller but no reply
So far I have tried about 7 or 8 different firmware versions, the sellers own, some junsun versions, ossuret versions even xtrons versions(all in correct format of 8667.bin and 8667.upd on root of usb formatted to fat32 but it does not read the usb.
The usb slots are still working as I can plug my phone in and it charges but the unit does not seem to have a full recovery mode
I have tried using a program called adb and fastboot on the computer but will not connect to the head unit
I have manually installed MTK drivers to the computer and tries a program called magic thunder but again would not connect to the unit.
I have tried to find a memory dump online but nothing, all I can find for mtk8667 is firmware consisting of 2 files 8667.bin and 8667.upd
I have now removed the unit from the car so i tried removing everything but 1 usb slot and removing the power for 10 mins before powering up and attempting to flash again
So i think i'm in need of expert help, so i'm looking for a repair shop, or person that can take the unit and hopefully get it working, more than happy to pay a fair fee and to post it to you, or if you are within a couple of hours travel from Yorkshire(Leeds area) I will happily come to you

[Guide] Dasaita px6 MTCE_HA update/upgrade Android 10 to Android 11

After spending 2 days on the forums and softbricking my device for several times, here's my 2 cents about on how to do the upgrade from Andorid 10 to Android 11 or even to downgrade ... on the HA units from Dasaita.
First of all, a small disclaimer:
This worked for me, it might not work for you.
You might end up in bootloop, blackscreen, softbrick, be aware of this risk
My device is a Dasaita Max11, I wanted to downgrade to A10, in order to get Magisk and Hal9k v5 mod installed.
After purchasing modinstaller 3pro, and trying to install Andorid10 I ended up in a blackscreen. Hopefully @Hal9k_ will be able to fix this in his further releases.
Remember, this was ONLY tested and worked on a MTCE_HA device. A rather new model sold by Dasaita last december. If you have a HTC or other device this has no or litlle importance to you, since the images atached are ONLY for HA devices. Also, if you have an older Dasaita model, it might not work as described bellow:
What you'll need:
- a USB A to USB A cable (as short as possible)
- the purple usb plug cable (labeled carplay/android auto) that comes out of the back of de divice (this is the only one that recognized my device in bootloader mode. Feel free to try the others, in function of what configuration your device might have.
- driver assistant (see google drive link)
- flash tool (see google drive link)
- full system image of Android 11 or 10 regarding what you want.
- a pin or paperclip to push the reset button.
The procedure is rather simple:
1. Download and install the driver assistant (google drive link at the end), run it to install the drivers on your windows machine
2. Unpack rkdevtool and run the exe (google drive link at the end). At this point the program will display a huge message in the bottom part saying: "no devices found". That's good.
3. Connect the Usb cable to the HU and to the PC, while the device is turned off (like no power, not in sleep mode)
4. Push the reset button and keep it pushed. While doing this turn on the device. At this point if everything is setup correctly you should hear a notification sound from windows and RKDevTool should say: "Found one bootloader device".
4a) If you only hear the notification and the device is not found in boot loader mode by RKDevTool, check Device Manager and try to reinstall the drivers / install other drivers, try another USB port. (at this point, the usbA to usbA might be to long if the device manager shows: unrecognized device)
4b) If you hear no sound, RKDevTool still shows no devices: Turn off the HU, (really of, no power). After 10-30 seconds turn it on, while it is on, press the reset button and keep it pressed (even after side leds flashing) until the device enters bootloader mode and it is recognized by the RKDevTool.
4c) If none of the above work, switch the usb port on the HU, or try another combination of reset pushing (like trying to enter recovery)
4d) If the PC won't recognize the device in bootloader mode, it might be a situation in which the device is not capable of this, and you might need to take it apart and use the direct SOM flash method ... search the forums.
During step 4 the HU display should remain black, so the only indication of being in bootloader mode and connected to the PC, is the windows notification sound and the messege displayed by RkDevTool.
5)With the device in bootloader mode, connected to the PC, in RKDevTool go to the tab that says: Upgrade firmware. Click on the line(empty rectangle) that says firmware and browse for the desired android img. (10 or 11). See drive link. Attention: the zips from the drive MUST be unpacked and the update.img must be loaded in RkDevTool.
6)After selecting the desired update.img, click on the ERASE FLASH button, wait until the process completes. If everything goes well, the device should reboot in maskrom mode.
7)After the device enters maskrom mode, RkDevTool shoul display the message: "Found one MASKROM device". At this point, just click the UPGRADE button. The new android is flashed on the HU. When the process is finished the HU reboots ITSELF. If that doesn't happen after 1-2max, cut the power and power on.
It should boot in the new android.
Final thoughts after 2 days of thinkering:
This worked for me to downgrade from 11 to 10, and also to upgrade from 10 to 11. Be aware it might NOT work for you!
In theory, if one can get the device in bootloader mode it should work also to upgrade from andoid 9 to 10. This is just a theory and I did not test it.
The advantages of Android 10 over 11 are (for me):
- root access via Magisk (for the time being I could not root 11 with any of the tutorials found online)
- less crap and restrictions imposed by the growing Google censorship..
- the possibility to install the Hal9k v5 mod, one of the greatest and customizable mods ever made for MTCD/MTCE devices.
- using both 11 and 10 I could very certainly tell you, that (from my point of view), 11 has no advantages over 10, nor in stability nor in sharpness.
The images from the google drive are vivid for android 10 and max for android 11. Again, this are FULL images, not just OTA. I put them here after endless hours of searching the net. I respectfully thank to those that took the time to upload them on xda and dasaita forums.
Once you install the base 10 or eleven you can easily switch from vivid to max via update.zip flashed from an usbstick.
Also: there are many tutorials that involve a sdcard, sdcardtool and different combinations of zip images. I tested them ALL using the side sd card slot of the device. NONE OF THEM worked for me. I found the OTG flash method to be the fastest and most reliable, once I figured out how to connect de HU to my pc in bootloader mode.
PX6 MTCE_HA Android 10 full image, Android 11 full image, RkDevTool, Driver Assistant link: https://drive.google.com/drive/folders/1eigYrCKl8Z34KQxBoX3Q91Foy2K15CGm?usp=share_link

Nice! Do you perhaps know where to find the files for other headunits? I have a MTCE_HT and have no idea where to look!

Help with my TS9

Hi!!
I have an audio car player model TS9 with android 10. It worked fine until 4 days ago.
Actually when I turn on the car, the unit stucks in android logo. (Like the photo)
I tried put an update in fat32 usb, but isnt read by the unity.
I think that this maybe work in recovery mode but I dont know how to enter in this model.
Can you help me pls?