Hi. I've an android radio TS9L m400 for 3 years.
Yesterday it worked perfectly. Today when I start up the car, the radio' screen frozen in "android logo". I try to on/off the car but the radio still go until "android" logo.
Can you help me pls?
Maybe I have to factory reser from usb? i dont know how.
Related
Hi,
I'm facing a problem with my customer O2 phone. It's showing "No Service with "!" mark. I have upgraded everything .. but nothing changes ..
It's a hardware problem or Software problem ??
Thank You
ive got the same problem.... can anyone help please.
You need to reflash using the 'radio ROM.nbf' file.
My magician's radio, stops working after the unit reboots after doing a ROM update. The radio works immediately after the inital splash screen (before the extended rom autorun). After this, the radio doesn't work.
If I skip the extended ROM instal, by rebooting the device prematurely, the radio still doesn't work.
I've tried many different ROM numbers. I've even downgraded to the stock ones that came with the unit.
Any suggestions?
Hint: My radio only works immediately after a hard reset, but not after rebooting using the extended ROM (customization). (aborting the customization, the radio doesn't work anyway).
it could be barred IMEI
What now works for me, is enabling, then disabling 'Flight-mode" on the phone.
Hi,
sorry for my bad English.
so i have HD2 with HSPL and 2.10 radio installed (i didi it half year ago), i've been using Android and Stock WM (1.48). It was launching by Dula boot program on start. Two days ago my battery discharged (first time since I installed android) I plugged it in and charged a little bit then I turned it on and it stucked on HTC screen (white screen with Htc logo and radio and rom version on the bottom) I performed a soft reset few times and once it loaded to the PIN menu, but sreen wasn't responding so I made soft reset one more time, it loaded PIN menu again, I clicked my PIN then I chose to boot Android and it stucked on booting. Then I performed a Hard reset but it didn't help.
If it matters, I have still access to the bootloader.
Please help me. Thank You in advance.
Wegeta
HI GUYS!!!
I really need your help!
I have tried to upgrade my Head Unit with Kotix's recent firmware, but for some reason I blew it....
I don't know for sure what's my headunit specs, but after a quick search through the internet I think this is it:
Headunit S150 - Already came with the android 4.
It was for a mercedes SLK R171... when I checked the RoadNav website, I've found this:
RN model: I096
Build number: IML74K-20140916
MCU: O005
FLASH: S00C
I think the problem is that When I downloaded Kotix's firmware I didn't changed it to my model.... Actually, I don't know how to change it.
I inserted the SD card in the GPS slot, rebooted the HU and the options menu appeared... I selected FULL/OFICIAL FIRMWARE.
It updated and installed everything, then it asked me to remove the SD Card from the GPS slot, which I did, and then the screen went black.
And that's it. Until now I can't see anything on my HU.
The source Light comes up, all of the other lights don't. The unit's screen is black all the time, no Image, No Sound, NOTHING.
BUT: I've noticed that my Phone connects to the HU Bluetooth... but that's it, no sound or anything at all.
I've tried to perform the hard Reset (with a clip on that little hole), the screen appears WHITE, then it stays black again, nothing happens.
I've tried also to insert the SD Card again in the GPS slot, with Kotix FIrmware, but I doesn't do anything, just stays black....
Also, I've downloaded the I096 FIrmware from the RoadNav Website, trying to install it in the HU, but without Sucess, the screen continues black, nothing happens.
Can you help me? What Can I do? :crying:
Thank you for your help!
danielrosas23 said:
HI GUYS!!!
I really need your help!
I have tried to upgrade my Head Unit with Kotix's recent firmware, but for some reason I blew it....
I don't know for sure what's my headunit specs, but after a quick search through the internet I think this is it:
Headunit S150 - Already came with the android 4.
It was for a mercedes SLK R171... when I checked the RoadNav website, I've found this:
RN model: I096
Build number: IML74K-20140916
MCU: O005
FLASH: S00C
I think the problem is that When I downloaded Kotix's firmware I didn't changed it to my model.... Actually, I don't know how to change it.
I inserted the SD card in the GPS slot, rebooted the HU and the options menu appeared... I selected FULL/OFICIAL FIRMWARE.
It updated and installed everything, then it asked me to remove the SD Card from the GPS slot, which I did, and then the screen went black.
And that's it. Until now I can't see anything on my HU.
The source Light comes up, all of the other lights don't. The unit's screen is black all the time, no Image, No Sound, NOTHING.
BUT: I've noticed that my Phone connects to the HU Bluetooth... but that's it, no sound or anything at all.
I've tried to perform the hard Reset (with a clip on that little hole), the screen appears WHITE, then it stays black again, nothing happens.
I've tried also to insert the SD Card again in the GPS slot, with Kotix FIrmware, but I doesn't do anything, just stays black....
Also, I've downloaded the I096 FIrmware from the RoadNav Website, trying to install it in the HU, but without Sucess, the screen continues black, nothing happens.
Can you help me? What Can I do? :crying:
Thank you for your help!
Click to expand...
Click to collapse
Maybe this help for you:
http://www.carnaviplayer.com/how-to-upgrade-android-23-to-40-firmware-bootloader-card-ezp-32
Hi.
I bought (ORDER DATE Jul 25, 2017) head unit Xtrons TCD761AL and yesterday I has two problems with radio. First problem I solved (app for playing music was not working. Problem was solved after factory reset), second problem I can´t solve. After factory reset, I set my radio (date, time, equalizer, fm radio stations, wallpaper etc...). Last step was set logo on radio starting. Then, screen started flashing. I tried to turn the radio off and turn on again. Nothing change, radio turn on and screen still flashing. I tried to use reset button, but nothing happen too. I can´t find any solution on internet for my radio.
This issue look like o software problem. Please, can you help me find some solution? Do you know combination of buttons for recovery system or have you some link for new firmware?
Many thanks for your replied.
PS: I´m so sorry for my bad english. It is not my maternity language.
Hello. I wanted to upload android 8 using modinstaler pro from hal9k. I did everything as in the youtube movie. I installed modinstaler pro on the radio and installed the update file on usb.
I turned on modinstaler pro and pressed android 8. After pressing Ok, the radio turned itself off and does not turn on.
I don't know what to do now or how to turn on the radio. am radio android 6 mtce px5.
With very little detail as to what has been tried to recover, suggest the following. Always provide detail to help others help you, there is inly frustration in guessing games.
Try recovery steps listed in that thread, if unable to recover use OTG method listed in my signature.