Hey so I bought Carlinkit 3.0 to use CarPlay on my car and when I plug it in nothing happening.
Indicator turn red, it shows WiFi but nothing happening on head unit. I tried to upgrade software to newest version, recover head unit to factory settings and nothing. USB ports in car are working well cause I can plug a usb stick and it’s work properly. I also tried to use AutoKit app and it’s keep saying “please insert the product”. I don’t really know what to do with this. Does anyone had similar problem? Thanks a lot for any advice
I’ve got PX5 head unit with Android 10 and MCU MTCE_CHS_V3.75_1
Related
Howdy,
Does anyone have a clue how to connect PH-1 to Skoda via either Android Auto or MirrorLink interfaces?
I've tried connecting the devices to my Skoda '17, and it failed 99 trials out of a hundred. In most of attempts made to connect the phone to the headunit the were no reactions on the car's screen.
When plugging PH-1 to the USB-A plug on the car's side, nothing happens. The car has 'Welcome to SmartLink. Please connect a device via USB. ' on its screen.
Only once had I the car to ask me to decide what type of connectivity I'd like it to be used: Android Auto or MirrorLink. I chose Android Auto and got something like Connection failed on the car's screen. Then nothing. I had no luck to connect the phone in any further attempt.
I have tried rebooting the phone, the head unit, I've even tried resetting SmartLink settings in head unit. Nada.
I have Sygic with MirrorLink feature installed, and the phone isn't connected to head unit via Bluetooth.
Does it mean Essential Phone does not support neither Android Auto nor MirrorLink interface? If so what was that Skoda asking me to choose how I'd like the phone be connected: via Android Auto or via MirrorLink? Just a glitch?
Does anyone have a clue? Thank you.
somewhere else i read that a person had to use
"fastboot -i 0x2e17 < your file/zip here >
to get fastboot to work.
good luck.
Luxon said:
Howdy,
Does anyone have a clue how to connect PH-1 to Skoda via either Android Auto or MirrorLink interfaces?
I've tried connecting the devices to my Skoda '17, and it failed 99 trials out of a hundred. In most of attempts made to connect the phone to the headunit the were no reactions on the car's screen.
When plugging PH-1 to the USB-A plug on the car's side, nothing happens. The car has 'Welcome to SmartLink. Please connect a device via USB. ' on its screen.
Only once had I the car to ask me to decide what type of connectivity I'd like it to be used: Android Auto or MirrorLink. I chose Android Auto and got something like Connection failed on the car's screen. Then nothing. I had no luck to connect the phone in any further attempt.
I have tried rebooting the phone, the head unit, I've even tried resetting SmartLink settings in head unit. Nada.
I have Sygic with MirrorLink feature installed, and the phone isn't connected to head unit via Bluetooth.
Does it mean Essential Phone does not support neither Android Auto nor MirrorLink interface? If so what was that Skoda asking me to choose how I'd like the phone be connected: via Android Auto or via MirrorLink? Just a glitch?
Does anyone have a clue? Thank you.
Click to expand...
Click to collapse
Don't know about Sygic or Mirror Link but the Essential phone works fine with Android Auto as far as I know. Works for me & wife's cars "out of the box" just plug the cable in. (not Skoda or VAG cars though). Often with Android Auto it's the cable, try some different cables. Else there is an app here on XDA that allows you to use an old phone to connect via wifi though a bit buggy I believe, called HeadUnit Reloaded I think
Edit:didn't read your post properly it seems, you could try setting a different Bluetooth codec in developer options ....
For those interested, for historical purposes, low-quality AKAI USB-B-to-USB-C cable was the culprit. Changed it to HTC's cable and it worked fine, the head unit did recognize the phone and started Android Auto shell. Never thought new cable could wreck the whole thing. Looks like the new AKAI brand owner produces crapware.
Hello dudes,
I bought through aliexpress a new HU for my mazda, because the Eonon was to slow with only 2 GB RAM.
I am very happy about the speed of the new unit, but i think the seller forgot to send me adapters, to connect the radio antenna and the steering wheel control.
At the eonon device i had a different cable for the radio antenna connection and the steering wheel control.
But now i am very confused. Both cables i can't connect to anything. Please check my Screenshot, if you have another idea, what i can do? There are many cables without anything attached. Just a naked cable...
Thanks
Okay i found an adapter for the radio antenna at eBay. But the canbus is not working and not recognized by android...
And odb2 is not working properly. Sometimes it connects, sometimes Bluetooth is not working properly for odb2.
Connection to phone through BT is permanent good.
The second cable is for AUX devices
from what i know now, so not needed.
Okay the seller answered me finally. He helped me to get through and configure the canbus first in the system.
I noticed that AIDA64 and HW Info shows Android 9, instead of 10. But system of Android shows Android 10. Is this fake?
I have in this unit a nice EQ for my dsp. If someone wants to have, tell me how to extract it from the rom. See Screenshot
I have the above head unit fitted and working fine in my car but I have an engine management device that contains a bluetooth low energy module in it. I would like to connect to this module via the provided app however it appears my head unit does not see or connect to BLE devices.
Does anybody know of a USB type device that I can connect to the head unit which will provide the ability to connect to BLE devices?
I'm using standard Dasaita android 10 and 3.69C.
Thanks
I have a similar issue. I have an Axxess signal processor which you make adjustments to it through Bluetooth. The processor connects to my phone but won't even be seen by my head unit (Dasaita max10). These head units only seem to recognize a phone or (select) obd dongles. It's pretty basic. I have been looking for ways to expand this, but so far unsuccessful.
I have just bought a Junsun V1 Pro Android Radio for my Renault Megane 3.
After installing the unit it does not start. But when I then pull the plug on the canbus out a little, a screen image comes on. Hope you can help me. Thanks
Did you manage to fix the issue? Otherwise the pic you posted would indicate that the unit thinks the car is shifted in Reverse.
Thanks for your reply.
And no didn't really solve the problem. How do I solve the problem if it thinks I'm in reverse gear?
If I cut one of the wires on the canbus, it wants to run but can't be turned off again.
Have you checked that your canbus settings are correct? Maybe try a different vehicle. Is your car equipt with parking sensors or a camera?. I had a similar issue with my unit (altough in a peugeot), where the headunit was set from factory to be ready for a backcam and sensors, which my car doesn't have.
Thanks for your reply. It has been a bit difficult to change the canbus settings when I couldn't get the start screen on at all. After I have cut a wire on the canbus, I can get the start screen on and have to try different settings.
And I have written to Junsun with the problem. Thought it might be a wrong cunbus/Cable.
And they write back that it's the right thing and I should try not to be in reverse gear, but I'm not in reverse gear??
Hi,
I have two head units, one EKIY T8 Android 10 that uses Carlink for connecting to Carplay on my iPhone, and the other is a T10 Srnubi UIS7862 that uses Tlink 5 to connect to iPhone Carplay.
On the T8-Carlink I connect the iPhone through USB and Carplay works, and I can swithch between my wife's and mine by connecting them through the cable.
On the T10-Tlink I can't connect iPhone through USB cable. Sometimes it doesn't do anything, others it says it's connecting but never really ends. The only way to connect is through Bluetooth pairing, but I find it more difficult to switch between phones, and in my last trip I experienced problems; when I passes close to an official building with frequency inhibitors connection got lost.
Should this connection through USB work for my phone or is this unit only capable of wireless?. What could be wrong?
My iPhone has iOS 16.1.1 and the Tlink software is 5.2.60.
Info about my head unit in picture attached
I received my T10 head unit today, it is TS10 uis7862
I am using tlink v5.3.21, my head unit came with 2 usb cables (one 4 pin one 6 pin)
I have tried both cables with 2 genuine apple cables and can’t get it to connect via usb.
The radio prompts me to press trust on the phone, but I never get the prompt on my phone. iPhone 14 pro max iOS 16.2
Anyone get this issue before? Wireles CarPlay works but is very buggy. If I leave CarPlay to go to radio I have to force quit app and manually reconnect phone again to get CarPlay back
Thanks
Rodger.1 said:
I received my T10 head unit today, it is TS10 uis7862
I am using tlink v5.3.21, my head unit came with 2 usb cables (one 4 pin one 6 pin)
I have tried both cables with 2 genuine apple cables and can’t get it to connect via usb.
The radio prompts me to press trust on the phone, but I never get the prompt on my phone. iPhone 14 pro max iOS 16.2
Anyone get this issue before? Wireles CarPlay works but is very buggy. If I leave CarPlay to go to radio I have to force quit app and manually reconnect phone again to get CarPlay back
Thanks
Click to expand...
Click to collapse
This is the wrong forum section for your unit.
This section is specifically for FYT devices.
Your device is a TS10 which I think should be discussed in this thread here
The devices are quite different firmware wise and the correct answer for an FYT may not be correct for a TS10.
Requested moderator moves to Android Head-Units forum