Hi All,
I'm facing a weird problem. I've just updated to android 2.2.1 by international galaxy (PDA I9000XWJS8) and I wanted to root it using update.zip applicable to 2.2 android version.
I have put the update.zip into /mnt/sdcard/ directory, then reboot into android recovery 3e, then 'install sdcard:update.zip'
Well, this is what I get:
----
Install from sdcard
Finding update package ...
Opening update package ...
Verifying update package ...
E:failed to seek in /mnt/internal_sd/update.zip
(Invalid argument)
E:signature verification failed
Installation aborte
----
Apparently the file cannot be found, because it is looked for in the /mnt/internal_sd directory and not /mnt/sdcard directory. But my internal sd is mounted in /mnt/sdcard.
How can I either change the behaviour of android recovery to look for zip file in /mnt/sdcard - or - mount my internal sd card as /mnt/internal_sd?
This of course does not permit me at all to install whatever update.zip.
During flashing to froyo 2.2.1 I've updated PIT to 8xx version (812?) and used repartition from ODIN.
Appart of that things look OK, any help greatly appreciated.
Search is your friend.
Since Froyo you cannot install update.zips from recovery (3e). You need 2e recovery.
SuperOneClick should work linkage .....
Alternatively you could flash a custom kernel via odin & have root, clockwork recovery & lagfix if you wanted.
is there any recommended kernel known to work with following configuration:
PDA: I9000XWJS8
PHONE: I9000XXJQ1
CSC: I9000OXXJP9
(build 2011.03)?
thanks
dejfson said:
is there any recommended kernel known to work with following configuration:
PDA: I9000XWJS8
PHONE: I9000XXJQ1
CSC: I9000OXXJP9
(build 2011.03)?
thanks
Click to expand...
Click to collapse
They pretty much all work with that config, just choose the one that would be most suited to your needs & level of competence.
And be sure to download the Odin version of the kernel you choose ......
List of I9000 custom kernels
try hardcore's speedmod-kernel-k13c-500hz, and root from CMW
He,
In order to get Arabic Android Generic Update for FroYo, I have to apply an update.zip from sdcard.
I rename the flash file update.zip and put in the root directory of my sdcard but when I boot on recovery and check this item <update.zip from sdcard> the reponse is "can't open /sdcard/update.zip".
Is there any solution to get it ?
Thanks for help
Hi all,
Can anyone please help me share my internet connection from my laptop to my Samsung Galaxy3 running Android 2.2?
I tried Connectify, Virtual Router and mHotspot but none of them work.
In case of mHotspot, I watched video on You Tube and done the same but I am not able to connect to that wi-fi network although I am able to find it by turning on my android mobile's wi-fi..
In case of Connectify and Virtual Router, I am not able to find Wireless Network on my android device. Can anyone please help?
Please let me know if any other information is required.
http://forum.xda-developers.com/showthread.php?t=1170232&highlight=wifi
Thanks Bane, can you please let me know, how to Flash the mod via CWM?
Also, do you know if CWM supports SG3 as I am also trying to flash my phone to install custom ROM but not able to do so via CWM?
http://forum.xda-developers.com/showthread.php?t=858583
please use search
In the thread that you have provided, please let me know where to look for "how to Flash the mod via CWM"
when I downloaded mod file, it asks me which application to open the file in. I selected ROM Manager, then it reboots in recovery mode...there I have four options
Reboot system now
Install sdcard: update.zip
wipe data/factory reset
wipe cache partition
which one I need to select?
I strongly advice to spend some time here in the forum and read all the FAQs and tutorials, as they will explain everything you need to know.
as the file is called wpa_adhoc-signed.zip you need to select an option that allows you to install a .zip or you need to rename the file to update.zip and select the option to install update.zip
Bane, I searched first and then asked but I am too noob to understand all this. I renamed the file to update.zip and then reboot to recovery mode. It still says the same:
Finding update package...
E:Can't mount /dev/block/mmcblk() (or NULL)
(No such file or directory)
E:Can't mount SDCARD:update.zip
Installation Aborted
You need cwm, flash a kernel that already has it(cf-root/g3mod/simplicity) or pm mumbozver for the installer
Or you can also manually copy the files although the first method will be easier
cdesai said:
You need cwm, flash a kernel that already has it(cf-root/g3mod/simplicity) or pm mumbozver for the installer
Or you can also manually copy the files although the first method will be easier
Click to expand...
Click to collapse
Thanks cdesai for the reply. I am using cwm and using this only, I am rebooting my phone in recovery mode. Does "flashing a kernel that already has this solution" means that I should flash my phone with a custom ROM that already has this solution implemented?
Ok
keep the adhoc file on your sd card
reboot into cwm
(use volume buttons to navigate, home to select)
choose apply zip from sd card
select the adhoc zip file
click on yes
it should work, if not then yes you can flash place the file by root explorer or flash a custom rom that already has it implemented
to manually apply the file
open the adhoc zip
open system folder
open bin folder
extract the file wpa_supplicant and keep just the file on ur sd
open root explorer and copy the file to /system/bin (replace the old one, take a backup of it - or rename it)
Are you referring to wpa_supplicant by adhoc file?
I cannot copy the extracted file to /system/bin folder as going to that folder is graying out paste option
If I try to apply it by rebooting into recovery mode, it is giving error message:
It is getting failed with the following message:
Finding update package...
E:Can't mount /dev/block/mmcblk() (or NULL)
(No such file or directory)
E:Can't mount SDCARD:update.zip
Installation Aborted
Note: I have renamed the file to update.zip and placed it in root of sdcard before rebooting it into recovery mode. Even then, I am getting this error message.
Please help me in proceeding further.
I put here my experience to install any ROM on your U8800Pro (these also applies to U8800 but you need the official GB)
To upgrade from 2.2 to 2.3
[you can use the following when you have any problem in installing a new ROM on your mobile (or if you have a blue secreen) ]
1. Download this archive (190MB) http://www.multiupload.com/NIIJC5BK83 which conatins two files od the official GB 512: U8800PV100R001C00B512G00.zip (you can also download it from the Huawei but it is too slow and the provided docements in chainees)
2. Extract it on your external sdcard (format it in fat32). this means that inside dload folder there must be two files namely UPDATE.APP and UPDATE_g.APP
Note: I have tried several times to copy the extracted file to internal memory (emmc) via adb push command but it fail due to the large file of UPDATE_g.APP (375MB) therefore use any external SD
3. Put the sdcard in your mobile again and turn it on while pressing three buttons at the sametime vol+, vol- and power button. This is the pink screen mode.
4. The update to the official 2.3.5 (the B512 which can be rooted) should start and your mobile will be rebooted. This step will take about 3 min to complet
5. After finishing turn your mobile on. IDEOX splash secreen will be presented (may take 1 - 2 min) after that android splash secreen will appear.
6. Root your mobile. to root your mobile, you can follow this steps of That-Guy'a thread
http://forum.xda-developers.com/showthread.php?t=1420728
İF you tried to install CM7 or MIUI from the recoverry mode you can get an error
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:verification failed
Installation aborted
Therefore you need to re-copy ClockworkMod v5.5.0.4 (you can use linux to copy the file .cust_backup/image folder while you are in pink mode)
also you can find another version (CWM Recovery 5.0.2.7) on http://forum.xda-developers.com/showthread.php?t=1343276
7. You will now able now to install CM7 or MIUI.
special thanks to That-Guy and matteof93
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Update
Resize Apps Partition
WARNING! This can BRICK your phone if done incorrectly.
PLEASE FOLLOW ALL STEPS CORRECTLY.
Please make a backup of all your important stuff.
Make a backup in the recovery.Make 100% sure the backup completes without any errors
Reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select Backup and Restore
2.Select Backup and Confirm(Proceed)
Once the backup is complete,the backup is located in "clockworkmod" folder on SD Card
You have to factory reset device,so be prepared to reinstall apps/games (You are going to lose data)
If you are fine with all of the above,The following mod increases the App Partition size from 1GB to 2GB.It rewrites the Internal Storage to 513MB(Used for videos/pictures,which is fine since we use our Micro SD cards for that)
If you are happy with all of the above,you can proceed with the next step :
Firstly,Download all files required and copy to SD Card
2 GB for apps_Jellybean_4.zip (232.63 KB)
Mega Link - http://goo.gl/ao3NFO
or
Media Fire Link - http://goo.gl/3j9RWm
AND
MTK_Nvram_Tool.zip (2.9MB)
Mega Link - http://goo.gl/Z2Chpx
or
Media Fire Link - http://goo.gl/sjah8X
Once on SD Card,reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select "Install Zip"
2.Select "Choose zip Sdcard"
3.Choose "MTK_Nvram_Tool.zip"
4.Select "Yes - Install MTK_Nvram_Tool.zip"
5.Click Next
6.Select "I Agree with this Terms and Conditions" and click Next
7.Click Next again
9.Choose 'Nvram Backup"
Once its done it should say "Backup Completed"
Under that it should say "Nvram Backup Successfully Completed"
It give the location for that backup,always keep that file (Copy to the PC Later)
10.Click OK
11.Click Exit
12.Click Yes
Now you are back at the install update from zip file screen.
13.Select "Install Zip"
14.Select "Choose zip Sdcard"
15.Choose "2 GB for apps_Jellybean_4.zip"
16.Select "Yes - Install 2 GB for apps_Jellybean_4.zip"
17.Go back to main menu
18.Choose Wipe menu
19.Choose Wipe Data (Factory Reset) -THIS WILL ERASE YOUR DATA
20.Wipe Cache
21.Wipe Dalvik Cache
22.Go back to main menu and reboot phone
The phone should reboot.If you get a message saying you have to format phone storage,click yes to format.
Go to Settings,Storage and See Total space is now 1.97GB
If the phone wont boot,power down,then hold up key and turn on to get into recovery mode.
1.Select Backup and Restore
2.Select Restore and Confirm(Proceed)
Restore the backup you made earlier.
This should let the system load when you reboot again,even if it asks you to format the phone again.
Copy NVRAM Backup to PC for safe keeping.
If you want to return to original/stock
Follow the same procedure as above but use the following file instead of the 2GB File
Stock Partition_Jellybean_4.zip (232.63KB)
Mega Link - http://goo.gl/pMn0ea
or
Media Fire - http://goo.gl/KJfRF7
Credits to :
AnoopKumar - MTK Nvram Tool
Andalitez said:
Hi Guys
Just an update.I downloaded the update from the website again,used winRAR and replaced the modem file in the system.
Everything works great now
Click to expand...
Click to collapse
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Replied
BlaqueDroid said:
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Click to expand...
Click to collapse
Hey man.
Sent you a PM.Currently working on a rom,will only be able to upload it for you in afew hours
ZTE
ztedevices.com/search.html?keyword=blade l2 look on there for the firmware for your device , push via adb sideloading and you should be set
noob problem...
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
No Sim Detected
eochi18jhae said:
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
Click to expand...
Click to collapse
Okay,you have to download the firmware version for your country,and have custom recovery installed on the phone.
So if you in UK,download the rom for your phone from UK provider.(doesnt matter if its JB or KK)
http://www.ztedevices.com/support/index.html
Once you have the rom,Use winRAR to do the following:
1.open the rom from your country in winrar so you can see the contents.
2.Open system folder (dont extract,just navigate into the folders in winrar)
3.Open "etc" folder
4.Open Firmware folder
5.Select "modem_1_wg_n.img" and extract it(i just drag and drop on desktop)
6.Open the Kitkat firmware you've downloaded using winRAR
7.Open System folder
8.Open "etc" folder
9.Open Firmware folder
10. Copy the "modem_1_wg_n.img" into that location(drag and drop from desktop)
11.winRAR asks if you want to :Add/Replace file/s? Select Yes or OK to allow it to
12.copy entire firmware to phone and reflash it on the phone from the SD card
I dont know if you can just replace the modem file after having loaded the firmware.I didnt try or test it.it may or may not work.
I am working on Custom Firmware for this phone though.
latest achievement was i managed to get the phone to see the SD card as phone storage thanks to various xda guides.this will be built in
FIrmware should be ready in a few days after testing.if anybody is interested in trying it out,let me know
problem solved...
Thank you sir...problem solved...it's really hard to be a noob...have to understand a lot of things now....I'm willing to try your firmware on my phone...upload it when done...keep up the good work...sorry for my english...
Post has been updated
I need to talk to you.... Go read my PM
installation is always aborted.. PLEASE HELP
Replied
Thanks
The thread is so useful... Keep up the good work, I don't have patience to try the new ROM!
Is there any chance for kernel supporting overclocking and undervoltage, also with more Gvernor and I/O Sheduler options?
Also Would be gorgeous if there's tap screen to wake option, this would need custom kernel too...
I'm now using DeviRSilva's kernel, which is doing great! Man, don't be afraid to relese it and continue tweaks
Still I'm a noob and maybe half of theese wishes are impossible, but would be so cool if they're possible to develop!
PD: I saw a site promoting Lollipop ROM for our L2 is that real?
PD2: Sorry for my awful English and probably stupid requests and questions...
helpppp
I have probelm, phone do not show sim card, on official site there is no serbia rom please how to fix it?
Andalitez said:
Replied
Click to expand...
Click to collapse
It fails to flash the ROM with the updated radio file. Just stops at Can't open... file.zip '(bad)'. Installation aborted.
How to fix?
Hi how do i unroot the zte blade l2?
And how to I remove costum recovery and reinstall stock recovery and stock rom?
Thanks just asking in case of sending it back for repairing.
Just noticed that the download link has been remoded.
Can someone provide a link for this rom?
Thanks.
Does this ROM have Greek language installed ???
no links are working
I need a copy of carliv recovery and backup of stock recovery as u think although my mobile mainly working I think the recovery is corrupt and has screwed my sound thanks in advance as I am taking a giant leap and biting bullet to try this recovery hope it can flash the legit kit kat if ever released by zte or virgin UK thanks
Andalitez said:
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Click to expand...
Click to collapse
any news on the kitkat rom yet? super excited to try this out!
is the link for the rom gone?
i dont see it