Related
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .
So, after I've updated my J500h to the newest firmware, my phone is stuck at the Samsung logo and the screen is also slowly turning green. So the problem is that I CAN'T boot into recovery or download mode. Odin recognizes the devices when it's hanging at the boot screen. ADB also recognizes the device after a few minutes:
Code:
E:/platform_tools>adb devices
List of devices attached:
18019a5b unauthorized
So, the problem is that I can't boot into download mode... Otherwise I would already flashed the stock firmware.
When connected to USB, the phone sometimes vibrates.
Can someone please help me? I've tried everything, but nothing helped
Does someone have any idea's to solve this problem? Looks like it's bricked.
gg. you just messed up the bootloader...
only way is jtag, nothing else...
H3XabyT3LV said:
gg. you just messed up the bootloader...
only way is jtag, nothing else...
Click to expand...
Click to collapse
Thanks for the answer. I will try jtag to restore the bootloader.
Fixed.
How
TheModzOn said:
Fixed.
Click to expand...
Click to collapse
tell us how?
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
TheModzOn said:
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
Click to expand...
Click to collapse
Please share it with me .. Please
Come on just share it already!
SPYMAN2000 said:
Come on just share it already!
Click to expand...
Click to collapse
frfwr963 said:
Please share it with me .. Please
Click to expand...
Click to collapse
Here it is (J500h 6.0.1 marshmallow): https://drive.google.com/file/d/0B-R9lQbH9_gCUFBKMWNoUmJyeUE/view?usp=sharing
I have an XT1621 and i was trying to install the June patch and i saw that the device was heating a lot so i tried to back to stock 6.0.1 but when i put the code "fastboot flash bootloader bootloader.img" the CMD windows says that the bootloader can't downgrade, i've ignored that and i've try to update via OTA to Android 7.0, it was almost done when the devices goes off and it never go back. The white LED blinks when i connect it to the charger and my PC still recognize it. If somebody knows what can i do ill be so gratefull.
champagne66601 said:
I have an XT1621 and i was trying to install the June patch and i saw that the device was heating a lot so i tried to back to stock 6.0.1 but when i put the code "fastboot flash bootloader bootloader.img" the CMD windows says that the bootloader can't downgrade, i've ignored that and i've try to update via OTA to Android 7.0, it was almost done when the devices goes off and it never go back. The white LED blinks when i connect it to the charger and my PC still recognize it. If somebody knows what can i do ill be so gratefull.
Click to expand...
Click to collapse
Try flash again using the below link.
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
arunzone said:
Try flash again using the below link.
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
Click to expand...
Click to collapse
I can't even put the device on fastboot mode
champagne66601 said:
I can't even put the device on fastboot mode
Click to expand...
Click to collapse
Try blank flash
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
arunzone said:
Try blank flash
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
Click to expand...
Click to collapse
With that file i get stuck in "blank-flash:sahara-transfer-image:send-image:unexpected packet"
Try to put the device on the charger. Then hold the Volume DOWN Button for a few secs
p9 lite VNS-L31
hi not long had the phone updated via firmware finder did 2 updates ok, then did another but that was the nrd90m test keys
tried to downgrade and fix mount/partitions but i messed this up
basically i can get into fastboot , frp and bootloader(PHONE?) unlocked.
cant flash anything as says failed and cannot 3button uodate only goes to 5% reboots.
I think i need to repartion/fix mounts can this be done via fastboot? or what program can i use, then i guess i can flash the stock recovery then 3 button update?
THANKS in advance
jas95aero said:
p9 lite VNS-L31
hi not long had the phone updated via firmware finder did 2 updates ok, then did another but that was the nrd90m test keys
tried to downgrade and fix mount/partitions but i messed this up
basically i can get into fastboot , frp and bootloader(PHONE?) unlocked.
cant flash anything as says failed and cannot 3button uodate only goes to 5% reboots.
I think i need to repartion/fix mounts can this be done via fastboot? or what program can i use, then i guess i can flash the stock recovery then 3 button update?
THANKS in advance
Click to expand...
Click to collapse
flash those 2 in dload method
1st file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl
2nd file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl
Kcetin20 said:
flash those 2 in dload method
1st file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl
2nd file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl
Click to expand...
Click to collapse
ok thanks ill have a go today let you know, thanks
jas95aero said:
ok thanks ill have a go today let you know, thanks
Click to expand...
Click to collapse
cant get into 3 button mode just says booting, can get into fastboot
jas95aero said:
cant get into 3 button mode just says booting, can get into fastboot
Click to expand...
Click to collapse
device needs to be shut off, either drain the battery or unplug the battery it got a plastic cover only 2min work ~,
Kcetin20 said:
device needs to be shut off, either drain the battery or unplug the battery it got a plastic cover only 2min work ~,
Click to expand...
Click to collapse
tried that just stuck at your device is booting
jas95aero said:
tried that just stuck at your device is booting
Click to expand...
Click to collapse
ok managed to get into it flashed another stock rom, but get system update failed now?
jas95aero said:
ok managed to get into it flashed another stock rom, but get system update failed now?
Click to expand...
Click to collapse
so now i can get into erecovery or dload moad but both fail, still 5% then fails
jas95aero said:
so now i can get into erecovery or dload moad but both fail, still 5% then fails
Click to expand...
Click to collapse
riht so i tried dc-phoenx but that shows my phone as...
IMEI: (i blanked this out)
Build number: :VNS-L21C432B130
Product model: HUAWEI VNS-L21
but its actually vns-l31 what can i do to change this ?
jas95aero said:
riht so i tried dc-phoenx but that shows my phone as...
IMEI: (i blanked this out)
Build number: :VNS-L21C432B130
Product model: HUAWEI VNS-L21
but its actually vns-l31 what can i do to change this ?
Click to expand...
Click to collapse
ok so to update and answer my own question ...... i used dc phoenix to flash antoher uppdate but l31c432b130 this failed but after restart the phoned showed as being vns-l31 so from there i installed firmware finder (after signing into playstore) then updated one update at time, so 130-150-160.
question is should i go onto emui 5/android7 or stick on 4.1/android 6?
Hi all,
So basically I was trying to install Pixelexperience to my Note 7 today and I messed it up big time. So I was having some issues with TWRP and one of the solutions (according to posts I found on Google) was to update the phone firmware. So I went to do that. Downloaded the lavander firmware for my Note 7, put it in the folder with other stuff I was downloading. One of these was firmware for Redmi A5 (which I didn't notice) and ended up flashing that. Now my phones screen is dead (I guess the rest of it also?). When I plug it in to PC the PC produces the sounds that something connected but running fastbood / adb devices doesn't return anything. I tried multiple times booting to fastboot / recovery but I have no idea when the phone is on or off. So it just produces sound on PC that it disconnected and connected like 1 second after but nothing still shows up on fastboot.
Did anyone had similiar issue and is there anything I can do? Or should I go look for a new phone?
Thank you for your time
Try to flash the whole rom again.
VD171 said:
Try to flash the whole rom again.
Click to expand...
Click to collapse
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
vivida said:
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
Click to expand...
Click to collapse
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.com/
VD171 said:
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.comI have tried but I just can't get the devices to boot into fastboot and I have no idea in what state it is since the screen doesn't show anything
Click to expand...
Click to collapse
Can you enter in recovery ?
VD171 said:
Can you enter in recovery ?
Click to expand...
Click to collapse
No, the same thing is happening. I just get the sound on PC and that's about it. It isn't recognized by the PC or any software that I tried to use
Try to get new cable and it will work
Eslamloka said:
Try to get new cable and it will work
Click to expand...
Click to collapse
After that's make your phone in edl mode then flash stock miui with miflash tool
Eslamloka said:
After that's make your phone in edl mode then flash stock miui with miflash tool
Click to expand...
Click to collapse
I receive cannot receive hello packet error message now
vivida said:
I receive cannot receive hello packet error message now
Click to expand...
Click to collapse
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Eslamloka said:
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Click to expand...
Click to collapse
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
vivida said:
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
Click to expand...
Click to collapse
before miflash firstly you must connect your phone with pc or laptop