Related
So a while back I rooted my Huawei P8Lite ALE-UL00 (China) and it took a while but it worked out great. Then a few weeks ago I was sick and browsing on my phone when I got a notification from EMUI telling me to update. Being the stupid kid I am I did it. And then it would show the Huawei logo on and on and on. Destined to fix it went to the forums to fix it. did ADB and Fastboot, nothing. Except more problems. Now when I turn it on it directly says this:
RESCUE MODE
Attention!
Please update systems again
Update Use Guide:
--- Android Logo ---
Error!
Func NO : 10 (boot image!)
Func NO: 2 (load failed!)
you can simply flash it by fast boot mod, flash the rom version UL-00-C00-B220
which update version did you got ??
Yes , you need fastboot b220 . Later OTA b230
You could try to only flash the boot.img via adb.
One Problem
I cannot fastboot it, it doesnt take me out of that screen, on my computer it says waiting for device, if i type fastboot devices it doesnt show up. Any other ideas?
Pricklybob said:
I cannot fastboot it, it doesnt take me out of that screen, on my computer it says waiting for device, if i type fastboot devices it doesnt show up. Any other ideas?
Click to expand...
Click to collapse
Well, first try again and dont forget to close hisuite it does that problem.
If it didint work, turn your device off then hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable it should access you to the bootloader then flash the firmware manually.
important
how are you guys
my device huawei p8 lite ALE-L21
I updated my phone to Android Marshmallow and I did not like it
The model number by details is >> ALE-L21C432B550
I WANT to comeback to android lollipop how can i do that
please help me my friends
Problem
ya.husein said:
Well, first try again and dont forget to close hisuite it does that problem.
If it didint work, turn your device off then hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable it should access you to the bootloader then flash the firmware manually.
Click to expand...
Click to collapse
Tried that, didnt let me work...
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
GloryNation said:
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
Click to expand...
Click to collapse
tried to enter recovery, still not work. can't go to developer options because phone is stuck on logo, can't power off. couldn't find any solution that works anywhere, been searching for more than 6 hours, still no use. phone model is VNS-L21 forgot to mention earlier
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
GloryNation said:
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
Click to expand...
Click to collapse
I tried to install nougat update, computer recognizes it only in fastboot. holding volume buttons haven't changed anything still no progress. the thing is i had installed nougat a moth or so ago and it worked fine, then rolled back to marshmallow and now this. i'm pretty sure i tried to install correct package, because it was the same i had installed earlier
Did you download a adb tool on your computer that have the 'fastboot.exe' file? If so open that folder,
Have the mouse curser hover in that folder, hold down shift & right click the mouse
Open command prompt
Connect phone as is in fastboot mode
Type adb devices & press enter
Type adb continue & press enter
Hi,
I have the same issue as ellanyx.
my phone can only be stucked while booting or if I connect my phone to a computer, I'm able to boot it in fastboot.
as ellanyx, I didn't enable usb-debug nor OEM unlock option...
so when I'm in fastboot, I type the command "fastboot oem unlock xxxxxx" (hopefully the different data needed are the correct ones mentioned on the box of the phone) I get this error message:
C:\Users\Dieu\Downloads\SRKToolHuawei-STABLE-V1.3-20160619>fastboot oem unlock xxxxx
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
and off course the other options like "fastboot flash recovery recovery.img "... doesn't work.
I can't use the adb commands neither.
when I type the commande, as mentioned above, "adb devices" or "adb continue", nothing works.
So I'm a bit desesperate
do you have any solution for this kind of issue?
thanks
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
pyromana said:
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
Click to expand...
Click to collapse
Probably you didnt have correct Oeminfo for MM if dload method didnt work....Try to conect phone with Toolkit and follow procedure for flashing oeminfo and custombin, after that flash stock recovrry and b161 via dload metod. You will find it on forum here.
Regards
the procedure from SRK toolkit?
would it be possible to provide it? because I can't unlock the OEM and I didn't tick the USB debug think.
Maybe problem with the ps not phone so u can not connect with adb
Try with different pc you must have flash oem with fast boot without enable adb from phone if u in fastboot
I can only boot my phone in fastboot (vol- + power) and not in recovery (vol+ + power).
also when using the SRK toolkit, the first screen tells me to be sure that the usb debugging is enable, which I haven't done...
if I'm not mistaken, fastboot is to use the fastboot command and recovery the adb commands
the connection with fastboot works on my computer, the link is made. however when I type the command to unlock the OEM, I get an error stating that the command is not allowed.
when I use the SRK toolkit, with the different questions, he tries to connect the phone with adb and waiting.... waiting...
is there a command to reboot in recovery but from fastboot? in the otherway around it exists but it doesn't seem that from fastboot to recovery it exists.
thanks.
Alexxxx1 said:
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Click to expand...
Click to collapse
dload method works on N. I downgraded my phone from unofficial N update back to official MM update using this method yesterday. You just have to enable OEM at developer options on settings.
It looks like people can't be bothered to read the 1st post properly before they reply.
HE CAN NOT BOOT TO ANDROID SO HE CAN NOT ENABLE OEM OR ACTIVATE USB DEBUGGING!!!!
What he CAN do, is go into eRecovery and Fastboot.
With that in mind, I would suggest using the dload method through fastboot.
Also, make sure it is Huawei SRK Tools 2.0 that is used, as it actually asks if you are in debug mode or fastboot.
Note that there is a few bugs in SRK 2.0:
The TWRP recovery file has the wrong filename in the package, so it WILL fail unless you name it correctly.
Also, when trying to root, do NOT use the "P9 Lite" method as that WILL fail too. Use the "P9/P9 Plus" method.
I am trying to set up a complete guide that can restore the phone when it is stuck in fastboot, however I apparently went a step too far...
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken[/QUOTE
Do you have TWRP recovery ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:50 AM ----------
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
Click to expand...
Click to collapse
Boot into fastboot mode and flash a custom recovery by meticulus. Link : meticulus.co.vu
Then whenyou get stuck hold power and vol down button for 2 minutes the phone will reboot and then when it says that your device has been unlocked and cant be trusted then only press vol up key ( dont press power button then). The u get into huawei recovery. From that u should power off the phone. Now get a custom rom by meticulus into your device sd card ( Cyanogenmod 13 is recommended ). Then insert sd card in a powered off phone. Now press vol up and power key and flash gapps and custom rom and you are good to go.
Click to expand...
Click to collapse
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
SnowmanDK said:
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
Click to expand...
Click to collapse
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Arsaam said:
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Click to expand...
Click to collapse
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
SnowmanDK said:
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
Click to expand...
Click to collapse
Go to fast boot mode and from their try to flash meticulus recovery.
You can also try the adb method as well.
Visit meticulus.co.vu
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Boot to bootloader by press volume down and power at same time and plug phone to PC fast! Then lets see what you have.
Saleone said:
Hello, I've flashed LineageOS before 1 week and it was all fine, but I had signal problems so I downloaded the stock ROM from the official website and used Huawei extraction tool to flash it with TWRP, after flashing I tried to reboot but the phone won't turn on. My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Had the same problem going back to Stock from LineageOS... Did you clear the System too? Back then, in order to install LineageOS, you'd have to clear the System too... And then flash the LineageOS...
So for reverting back, do the same... Wipe the System and then log in to fastboot mode and then flash the 4 Images extracted from the Huawei Update Extractor... If by any means, you could not go into fastboot mode, then connect your phone to your laptop by holding the volume down key, this should boot into the fastboot mode...
Good luck..
amageek said:
Had the same problem going back to Stock from LineageOS... Did you clear the System too? Back then, in order to install LineageOS, you'd have to clear the System too... And then flash the LineageOS...
So for reverting back, do the same... Wipe the System and then log in to fastboot mode and then flash the 4 Images extracted from the Huawei Update Extractor... If by any means, you could not go into fastboot mode, then connect your phone to your laptop by holding the volume down key, this should boot into the fastboot mode...
Good luck..
Click to expand...
Click to collapse
Thanks for trying to help,but I can't turn my phone on,just the led blinks red-green-red and when i connected it to PC in Device Manager the phone was detected but with some weird chinese letters..
u fix?
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Man u fix this problem??? because i have same problem
Saleone said:
Thanks for trying to help,but I can't turn my phone on,just the led blinks red-green-red and when i connected it to PC in Device Manager the phone was detected but with some weird chinese letters..
Click to expand...
Click to collapse
Nicolas2000 said:
Man u fix this problem??? because i have same problem
Click to expand...
Click to collapse
You need to boot in fastboot mode! Don't you see? If fast boot works, you have hope, if not, then you are fu*kup!
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
RootingPro-18 said:
You need to boot in fastboot mode! Don't you see? If fast boot works, you have hope, if not, then you are fu*kup!
Click to expand...
Click to collapse
only red and verdant ... and in device manager something with Chinese letters appears ..and HUAWEI USB COM 1.0 ...
Nicolas2000 said:
only red and verdant ... and in device manager something with Chinese letters appears ..and HUAWEI USB COM 1.0 ...
Click to expand...
Click to collapse
Boot to bootloader by press volume down and power at same time and plug phone to PC fast!
In the beginning I wanted to upgrade my device to 9.0 ( Korean version ) then when i Update my phone Through LGUP show error message (Approximately 75%)
Then I turn off the phone Then when I want to get in Downloading mode Is directed to fastboot
so I stuck in fastboot
please HELP
Try to force reboot via holding power + vol down for 8 seconds.
themostunique said:
Try to force reboot via holding power + vol down for 8 seconds.
Click to expand...
Click to collapse
Doesn’t work :crying:
Try draining the phone's battery via otg, then hold vol up and plug in usb to computer to download mode.
@a_al_khaled1 you need to provide a bit more info and answer to those questions:
1. Were you bootloader unlocked?
2. What option and partitions you have checked to flash via LGUP?
vlad48 said:
@a_al_khaled1 you need to provide a bit more info and answer to those questions:
1. Were you bootloader unlocked?
2. What option and partitions you have checked to flash via LGUP?
Click to expand...
Click to collapse
1- No
2- update
This is what appears when I try to boot or download mode https://drive.google.com/file/d/1xvEqf1FszSxvMXhJMq-QFM2yIIXwAre7/view?usp=drivesdk
Now we are getting there...
Can you remember OS Oreo version you were using and if your device has AT&T branding or it was a Google - Fi one?
vlad48 said:
@a_al_khaled1 you need to provide a bit more info and answer to those questions:
1. Were you bootloader unlocked?
2. What option and partitions you have checked to flash via LGUP?
Click to expand...
Click to collapse
vlad48 said:
Now we are getting there...
Can you remember OS Oreo version you were using and if your device has AT&T branding or it was a Google - Fi one?
Click to expand...
Click to collapse
V350ULM10i
Amazon version
Now everything is clear.
Try holding and not releasing volume - and power while the phone boots and reboots into fastboot 6 times in a row then release only Vol- while still holding power - phone will change active boot slot and will boot into slot _b (if it was bootable before of course).
If this does not happen then your only way to restore it is via JTAG.
Contact this guy.
vlad48 said:
Now everything is clear.
Try holding and not releasing volume - and power while the phone boots and reboots into fastboot 6 times in a row then release only Vol- while still holding power - phone will change active boot slot and will boot into slot _b (if it was bootable before of course).
If this does not happen then your only way to restore it is via JTAG.
Contact this guy.
Click to expand...
Click to collapse
That what happen when I try to get to download mode https://drive.google.com/file/d/14mKlTCVSYj4bA0LHZ84KfJ4EaAm9608N/view?usp=drivesdk
Yes, I know - you have 75% Korean pie with leftovers from Amazon Oreo (your abl misc and ftm partitions are still from Oreo while the rest is from Pie).
You can enter into 9008 mode for JTAG flashing so just contact the guy and ask him to flash to you back amazon LAF partition, afterwards you will have properly working download mode and you can restore the whole amazon kdz.
@vlad48 I am in the same situation, however mine is the AT&T variety, I tried swapping to boot_b a couple times and no luck. Is my only option to do the 9008 mode for JTAG flashing?
E: I have backups of Boot_a/b, abl_a/b, and xdl_a/b if that is worth anything. However my phone isn't detected by LGUP anymore. I was on oreo 8.0.0 with the july 2018 security update.
Yes - the only way apart from sending it back to AT&T is to flash back your Oreo partitions via JTAG - in your case easiest way will be to re-lash US Open KDZ.
a_al_khaled1 said:
In the beginning I wanted to upgrade my device to 9.0 ( Korean version ) then when i Update my phone Through LGUP show error message (Approximately 75%)
Then I turn off the phone Then when I want to get in Downloading mode Is directed to fastboot
so I stuck in fastboot
please HELP
Click to expand...
Click to collapse
I can't get into fastboot.
Shawnashley said:
I can't get into fastboot.
Click to expand...
Click to collapse
What variant do you have?
If you're running AT&T firmware, you don't have fastboot flash commands.
You have to convert to another firmware via Dev Patched LGUP.
ChazzMatt said:
What variant do you have?
If you're running AT&T firmware, you don't have fastboot flash commands.
You have to convert to another firmware via Dev Patched LGUP.
Click to expand...
Click to collapse
Is there a specific firmware you would recommend? Thanks in advance
Shawnashley said:
Is there a specific firmware you would recommend? Thanks in advance
Click to expand...
Click to collapse
The AT&T V35 I bought from @bacon612 was flashed to Google Fi firmware.
This or US unlocked 'i' are good candidates.
https://lg-firmwares.com/downloads-file/19020/V350ULM10i_00_NAO_US_OP_0221.kdz
Takes ages to download...
The above is US Unlocked firmware for the v35 Feb Security patch.
Sent from my GM1915 using Tapatalk
ChazzMatt said:
The AT&T V35 I bought from @bacon612 was flashed to Google Fi firmware.
Click to expand...
Click to collapse
bacon612 said:
This or US unlocked 'i' are good candidates.
https://lg-firmwares.com/downloads-file/19020/V350ULM10i_00_NAO_US_OP_0221.kdz
Takes ages to download...
The above is US Unlocked firmware for the v35 Feb Security patch.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
I'm going to look into that one. Thanks for the recommendation. Also, I was able to use LGUP to flash the Korean KDZ. It seemed to work fine, and does now. It flashed perfect, my data was intact until I had to restart my phone a while later and then it was all gone. Looked factory out of the box. However it is smooth as a baby's bottom now.
Shawnashley said:
I'm going to look into that one. Thanks for the recommendation. Also, I was able to use LGUP to flash the Korean KDZ. It seemed to work fine, and does now. It flashed perfect, my data was intact until I had to restart my phone a while later and then it was all gone. Looked factory out of the box. However it is smooth as a baby's bottom now.
Click to expand...
Click to collapse
Which version of LGUP you used? and dll file PLz
As the title says, my phone just boots till asus logo and switches off. The battery was 15% at night. I woke up and there was no juice left. So I kept my phone for charging. The phone just boot loops with big battery icon with no charging animation. Even the recovery doesn't work. I tried flashing via fastboot mode. My phone was already unlocked. But during fastboot, it says FAILED (remote: 'Error flashing partition : Write Protected'). Any help? Yes, I'm using usb 2.0 port.
anagramgenius said:
As the title says, my phone just boots till asus logo and switches off. The battery was 15% at night. I woke up and there was no juice left. So I kept my phone for charging. The phone just boot loops with big battery icon with no charging animation. Even the recovery doesn't work. I tried flashing via fastboot mode. My phone was already unlocked. But during fastboot, it says FAILED (remote: 'Error flashing partition : Write Protected'). Any help?
Click to expand...
Click to collapse
Try following this tutorial all over again.
https://telegra.ph/Guide-to-unlock-bootloader-flash-custom-recovery-and-root-ASUS-Max-Pro-M2-03-06
Anubhav_singh said:
Try following this tutorial all over again.
https://telegra.ph/Guide-to-unlock-bootloader-flash-custom-recovery-and-root-ASUS-Max-Pro-M2-03-06
Click to expand...
Click to collapse
My phone is already unlocked. And now the fastboot isn't working. I already tried unlocking again. I get the above mention error while flashing via fastboot.
anagramgenius said:
My phone is already unlocked. Add now the fastboot isn't working. I already tried unlocking again. I get the above mention error while flashing via fastboot.
Click to expand...
Click to collapse
You get the unlocked bootloader warning while rebooting the device now.?
Anubhav_singh said:
You get the unlocked bootloader warning while rebooting the device now.?
Click to expand...
Click to collapse
Yes. But it doesn't boot to system. It just switches off after displaying asus logo.
anagramgenius said:
Yes. But it doesn't boot to system. It just switches off after displaying asus logo.
Click to expand...
Click to collapse
Join the device group on telegram, it would be easy to get help there as it might be a lengthy process.
Anubhav_singh said:
Join the device group on telegram, it would be easy to get help there as it might be a lengthy process.
Click to expand...
Click to collapse
Yes I have already joined. But I don't have a backup smartphone. So I'll have to wait I guess.
EDIT: Seems no one knows a solution in telegram group either. I asked about this problem there and one or two replied and they stopped replying.
anagramgenius said:
Yes I have already joined. But I don't have a backup smartphone. So I'll have to wait I guess.
EDIT: Seems no one knows a solution in telegram group either. I asked about this problem there and one or two replied and they stopped replying.
Click to expand...
Click to collapse
Okay, try flashing the fastboot rom. It will relock the bootloader and will flash the stock oreo rom. See if this works.
Anubhav_singh said:
Okay, try flashing the fastboot rom. It will relock the bootloader and will flash the stock oreo rom. See if this works.
Click to expand...
Click to collapse
It shows the same error. Nothing can be flashed via fastboot mode.
Was anyone able to resolve this?
mitrokin said:
Was anyone able to resolve this?
Click to expand...
Click to collapse
No.
anagramgenius said:
No.
Click to expand...
Click to collapse
You might need to visit the service center, as recovery can't be booted, also nothing can be flashed as device is write protected.
try to unlockbootloader again and try flashing then
nishant6577 said:
try to unlockbootloader again and try flashing then
Click to expand...
Click to collapse
No fastboot command is working. So I can't unlock bootloader again.(it is already unlocked btw)
anagramgenius said:
No fastboot command is working. So I can't unlock bootloader again.(it is already unlocked btw)
Click to expand...
Click to collapse
Check whether your usb port is 3.0, fastboot needs usb 2.0 ports for fastboot commands.
V9_6b said:
Check whether your usb port is 3.0, fastboot needs usb 2.0 ports for fastboot commands.
Click to expand...
Click to collapse
Yup. It's usb 2.0 port.
Bro,I have same problem as you have.how can I solve it even edl method also shows firehose qloader failed error .how I solve bro!!!
Anyone? Please help us, I'm also in this kind of situation with OP. I still can't use Asus Flash Tool because it needs internet connection I'm just borrowing my cousin's PC and they don't have internet broadband either.
I'm wondering if it also gives an error "write protected" like on Fastboot CMD. And if it does I think our last resort is to flash with QFIL.
If I am right, you'll updated to the 073 pie version of the stock software, which bricked the devices.?
blood1995 said:
Anyone? Please help us, I'm also in this kind of situation with OP. I still can't use Asus Flash Tool because it needs internet connection I'm just borrowing my cousin's PC and they don't have internet broadband either.
I'm wondering if it also gives an error "write protected" like on Fastboot CMD. And if it does I think our last resort is to flash with QFIL.
Click to expand...
Click to collapse
Unable to flash with QFIL either.