Related
EDIT: SOLUTION (Not a fix)
For those who are stuck at "50% saying current account is different from the a/c info of device"
It is due to the database miss-match in their server ,the possible sollution are :
Remember: for MediaTek devices you will have to first flash a China Dev ROM onlu then you can get the unlock successful.
But this is not a recommendation for Qualcomm Devices.
1. Go to i.mi.com and look weather your device shows up in the find device (this is required only to be sure as to your device is connected to their server and they have updated the info on your Device too).
2. Reset your Phone sign in and turn on find device. turn on usb debug and oem unlock connect to pc allow whatever is asked on your phone also check always trust, then open adb folder and open cmd there and type adb devices your phone will ask for authorisation allow it and check always trust.
3. Mail your concern with user ID and also the snapshot of the error as they will ask for it,to your regional service (I am an indian so i had to mail it at [email protected])(just google contact xiaomi) wait for their reply.
You can PM these persons on MIUI forum regarding the 50% stuck issue.
{ EDIT 2:
You may contact these person in MIUI forum:
1) vincent_khoo
2) PatrickXi
( @bravonova gave me these names you may try I haven't cross checked as mailing will most probably solve) }
The last method should Work for everyone as it's a db miss-match which should be fixed after this.
PS: This a solution and not a fix so it will take time.
PPS: Don't blame me for all the trouble Blame Xiaomi.
ilvmyname said:
Ok, so I have been trying to move to miui 8 global beta version now for a long time and haven't succeeded, the updater app says could not verify update package.
I have a pretty good net connection so that's not an issue.
Also If I try download latest rom it says "Can't download update, wait a minute or two" and this it has been saying for about a week now (ironic).
So, I requested for unlocking the bootloader got the confirmation messages after 3 days tried to unlock now stuck at 50% saying "account is different from the account in the phone info"
I don't want to use the fast boot edl method of flashing rom as my lappy keeps getting sudden shutdown, so I don't want it to shutdown in between and get hard bricked.
I have tried MiPc suit but since it cannot do a backup(again app bug) so cannot flash through it.
I have looked in to the mi cloud and my phone does gets located.(possible solution given for unlock bootloader but even that didn't work).
Can anyone please help me on this or will I have to be on this ****ty unrooted Rom forever.
Currently on miui 7.5.3.0 global stable rom.
Any suggestions will be appreciated ty
Click to expand...
Click to collapse
I unlocked it just today!make sure all drivers are installed..boot into fastboot mode :- power off then hold vol down + power button.w8 for the drivers to get installed
Now boot into recovery mode :- turn off device and hold volume up + power button.w8 for the drivers to get installed.
I was stuck at the same 50% error..one of d xda member told me to boot into recovery mode and let the drivers get installed and taddaa...bootloader unlocked
Make sure u r logged in to the same account in ur phone u r using to unlock the bootloader
I fixed this by updating to latest version in miui app in fastboot mode.
Same problem for me. I tried using the MIUI PC Suite, it tells me my phone isnt up to date even though it is. Recovery mode drivers fail. Requested unlock over 2 weeks ago and got the SMS 9 day ago... still stuck at 50% error. Its driving me nuts.
Warrimonk said:
Same problem for me. I tried using the MIUI PC Suite, it tells me my phone isnt up to date even though it is. Recovery mode drivers fail. Requested unlock over 2 weeks ago and got the SMS 9 day ago... still stuck at 50% error. Its driving me nuts.
Click to expand...
Click to collapse
i today unlocked my bootloader...try doing this go into recovery mode by pressing power+volumeup button. You will see a picture telling you to connect ur phone to pc using usb cable..connect your phone to your pc now w8 and let the drivers get installed and try again..i did dis and unlocked it today before that i was getting the same error even today got the same error before doing this.
hitesh1792 said:
i today unlocked my bootloader...try doing this go into recovery mode by pressing power+volumeup button. You will see a picture telling you to connect ur phone to pc using usb cable..connect your phone to your pc now w8 and let the drivers get installed and try again..i did dis and unlocked it today before that i was getting the same error even today got the same error before doing this.
Click to expand...
Click to collapse
First of all thanks for the reply sir but
I tried entering to recovery mode and then connect to pc but nothing happens, I mean it does not show connected even after say 5 minutes.
Although when trying to enter into the fastboot mode and then connecting to pc the drivers do get install and it shows connected and stucks at 50%
I do have adb drivers RN3 USB drivers installed on my pc
But all things in vain.
Garyj881 said:
I fixed this by updating to latest version in miui app in fastboot mode.
Click to expand...
Click to collapse
I am sorry sir but I didn't get you, you updated to latest version of miui through the updater app right? And then entered to fastboot mode to unlock right?
My updater app also doesn't work It says cannot verify update package and so I am stuck like from all corners.
ilvmyname said:
First of all thanks for the reply sir but
I tried entering to recovery mode and then connect to pc but nothing happens, I mean it does not show connected even after say 5 minutes.
Although when trying to enter into the fastboot mode and then connecting to pc the drivers do get install and it shows connected and stucks at 50%
I do have adb drivers RN3 USB drivers installed on my pc
But all things in vain.
Click to expand...
Click to collapse
Are you able to see this pic on your device when you enter recovery mode??
hitesh1792 said:
Are you able to see this pic on your device when you enter recovery mode??
Click to expand...
Click to collapse
Yes
ilvmyname said:
Yes
Click to expand...
Click to collapse
connect your device to your pc and let the drivers get installed...and if u are using a desktop pc do not use the usb port which is at the front of the cpu..use the one which are at the back of the cpu...the image i am attaching shows which drivers get installed.
after drivers get installed remove usb cable and again boot into fastboot mode (power + volume down ) and try again to unlock bootloader
hitesh1792 said:
connect your device to your pc and let the drivers get installed...and if u are using a desktop pc do not use the usb port which is at the front of the cpu..use the one which are at the back of the cpu...the image i am attaching shows which drivers get installed.
after drivers get installed remove usb cable and again boot into fastboot mode (power + volume down ) and try again to unlock bootloader
Click to expand...
Click to collapse
Okay, so i am missing drivers i guess.
Have you pre installed any drivers if so can you provide me a link?
as when i connect into recovery mode only the bootloader interface driver get install and nothing else and hence it still doesn't show connected in the recovery mode.
ilvmyname said:
Okay, so i am missing drivers i guess.
Have you pre installed any drivers if so can you provide me a link?
as when i connect into recovery mode only the bootloader interface driver get install and nothing else and hence it still doesn't show connected in the recovery mode.
Click to expand...
Click to collapse
strange!bootloader interface driver gets installed when connected in fastboot mode..uninstall that driver connect your phone in recovery mode and see if dese drivers get installled..nope i do not have any link because as soon as i connected my phone into recovery mode the drivers automatically got installed!
ps :- i was able to unlock bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global_f5889c1549
i too have the same problem !! if you got the solution please tell me !!
T/[email protected]$ said:
i too have the same problem !! if you got the solution please tell me !!
Click to expand...
Click to collapse
i was able to unlock the bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549...
i was not able to unlock it before i connected my phone into recovery mode and installed the drivers on my pc..as soon i did it the bootloader got unlocked .before that i was getting the same error even after flashing the V7.3.7.0.LHOMIDD firmware
hitesh1792 said:
i was able to unlock the bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549...
i was not able to unlock it before i connected my phone into recovery mode and installed the drivers on my pc..as soon i did it the bootloader got unlocked .before that i was getting the same error even after flashing the V7.3.7.0.LHOMIDD firmware
Click to expand...
Click to collapse
how to flash kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549.?
when i connect my device in recovery mode nothing happens
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
T/[email protected]$ said:
how to flash kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549.?
when i connect my device in recovery mode nothing happens
Click to expand...
Click to collapse
it must install the drivers...please do check out the steps mentioned above by the xda member "otyj" he helped me to unlock my bootloader
I had the same problem and believe me I did everything possible as you are also advised in this forum.
But it had nothing to do with this.
Just wait and watch.. try everyday once and I think you will get in 7-10 more days.
I was also frustated at that time but now I can unlock everysingle time I want when it gets locked.
otyg said:
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
Click to expand...
Click to collapse
where can i find fastboot images ?
and when i plugin in recovery mode nothing happens !!
and your were telling that app will be installed in phone when we connect wiith mi pc suit, can you clearly explain it ?
otyg said:
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
Click to expand...
Click to collapse
Okay I will try flashing a rom through MiFlash toll b'coz the above methods didn't work and will quote if that's how it gets fixed
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
GloryNation said:
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
Click to expand...
Click to collapse
tried to enter recovery, still not work. can't go to developer options because phone is stuck on logo, can't power off. couldn't find any solution that works anywhere, been searching for more than 6 hours, still no use. phone model is VNS-L21 forgot to mention earlier
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
GloryNation said:
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
Click to expand...
Click to collapse
I tried to install nougat update, computer recognizes it only in fastboot. holding volume buttons haven't changed anything still no progress. the thing is i had installed nougat a moth or so ago and it worked fine, then rolled back to marshmallow and now this. i'm pretty sure i tried to install correct package, because it was the same i had installed earlier
Did you download a adb tool on your computer that have the 'fastboot.exe' file? If so open that folder,
Have the mouse curser hover in that folder, hold down shift & right click the mouse
Open command prompt
Connect phone as is in fastboot mode
Type adb devices & press enter
Type adb continue & press enter
Hi,
I have the same issue as ellanyx.
my phone can only be stucked while booting or if I connect my phone to a computer, I'm able to boot it in fastboot.
as ellanyx, I didn't enable usb-debug nor OEM unlock option...
so when I'm in fastboot, I type the command "fastboot oem unlock xxxxxx" (hopefully the different data needed are the correct ones mentioned on the box of the phone) I get this error message:
C:\Users\Dieu\Downloads\SRKToolHuawei-STABLE-V1.3-20160619>fastboot oem unlock xxxxx
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
and off course the other options like "fastboot flash recovery recovery.img "... doesn't work.
I can't use the adb commands neither.
when I type the commande, as mentioned above, "adb devices" or "adb continue", nothing works.
So I'm a bit desesperate
do you have any solution for this kind of issue?
thanks
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
pyromana said:
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
Click to expand...
Click to collapse
Probably you didnt have correct Oeminfo for MM if dload method didnt work....Try to conect phone with Toolkit and follow procedure for flashing oeminfo and custombin, after that flash stock recovrry and b161 via dload metod. You will find it on forum here.
Regards
the procedure from SRK toolkit?
would it be possible to provide it? because I can't unlock the OEM and I didn't tick the USB debug think.
Maybe problem with the ps not phone so u can not connect with adb
Try with different pc you must have flash oem with fast boot without enable adb from phone if u in fastboot
I can only boot my phone in fastboot (vol- + power) and not in recovery (vol+ + power).
also when using the SRK toolkit, the first screen tells me to be sure that the usb debugging is enable, which I haven't done...
if I'm not mistaken, fastboot is to use the fastboot command and recovery the adb commands
the connection with fastboot works on my computer, the link is made. however when I type the command to unlock the OEM, I get an error stating that the command is not allowed.
when I use the SRK toolkit, with the different questions, he tries to connect the phone with adb and waiting.... waiting...
is there a command to reboot in recovery but from fastboot? in the otherway around it exists but it doesn't seem that from fastboot to recovery it exists.
thanks.
Alexxxx1 said:
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Click to expand...
Click to collapse
dload method works on N. I downgraded my phone from unofficial N update back to official MM update using this method yesterday. You just have to enable OEM at developer options on settings.
It looks like people can't be bothered to read the 1st post properly before they reply.
HE CAN NOT BOOT TO ANDROID SO HE CAN NOT ENABLE OEM OR ACTIVATE USB DEBUGGING!!!!
What he CAN do, is go into eRecovery and Fastboot.
With that in mind, I would suggest using the dload method through fastboot.
Also, make sure it is Huawei SRK Tools 2.0 that is used, as it actually asks if you are in debug mode or fastboot.
Note that there is a few bugs in SRK 2.0:
The TWRP recovery file has the wrong filename in the package, so it WILL fail unless you name it correctly.
Also, when trying to root, do NOT use the "P9 Lite" method as that WILL fail too. Use the "P9/P9 Plus" method.
I am trying to set up a complete guide that can restore the phone when it is stuck in fastboot, however I apparently went a step too far...
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken[/QUOTE
Do you have TWRP recovery ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:50 AM ----------
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
Click to expand...
Click to collapse
Boot into fastboot mode and flash a custom recovery by meticulus. Link : meticulus.co.vu
Then whenyou get stuck hold power and vol down button for 2 minutes the phone will reboot and then when it says that your device has been unlocked and cant be trusted then only press vol up key ( dont press power button then). The u get into huawei recovery. From that u should power off the phone. Now get a custom rom by meticulus into your device sd card ( Cyanogenmod 13 is recommended ). Then insert sd card in a powered off phone. Now press vol up and power key and flash gapps and custom rom and you are good to go.
Click to expand...
Click to collapse
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
SnowmanDK said:
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
Click to expand...
Click to collapse
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Arsaam said:
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Click to expand...
Click to collapse
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
SnowmanDK said:
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
Click to expand...
Click to collapse
Go to fast boot mode and from their try to flash meticulus recovery.
You can also try the adb method as well.
Visit meticulus.co.vu
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..
ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"
o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".
ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!
I am still in the same situation... Anyone who knows what to do?
ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry
I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.
Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?
try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok
Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device
Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.
My friend gave me his phone to take a look at. It's Huawei VNS-L31. I'm guessing it's completely stock, no recovery, no fiddling on it whatsoever.
He tried to run a software upgrade on it but it failed somehow and now we can't even boot back into android. Please check the video it's only 26 seconds long.
https://photos.app.goo.gl/9Xxy0NEkfJAFmBy92
- Verifying update package...
- Installing update (up to 5%)
- Software install failed, The update package does not exist. Please download the package again.
=> Reboot system now
After rebooting it just tries the update once again. I'm guessing normally this should reboot back into Android. But clearly something is wrong? Anyone got any suggestion please? I've tried starting fastboot mode by connecting to USB and holding volume down. Also by holding power + volume down. But this doesn't work also, maybe because the device doesn't power off, only reboot...
Thanks in advance
Help
the same problem here. entering fastboot mode is useless, my windows computer does not recognise my phone, the drivers for fastboot are up to date. tried to go back from rr marshmallow to stock with the dload method. dear cracks out there, does anybody of you have a good idea how to reactivate my phone? can not enter erecovery. may be someone could provide the stock erecovery
kurvenmeister said:
the same problem here. entering fastboot mode is useless, my windows computer does not recognise my phone, the drivers for fastboot are up to date. tried to go back from rr marshmallow to stock with the dload method. dear cracks out there, does anybody of you have a good idea how to reactivate my phone? can not enter erecovery. may be someone could provide the stock erecovery
Click to expand...
Click to collapse
Can you please point me to a link for the "dload" method? I'm not used to huawei. I have no idea what this is ?
dload look at this
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.