Hello hope all is wonderful, but I was curious if anyone have a up_param.bin fine for there SMT500 Tab a 10.1 they could share with me or can even extract it for me so I can remove the boot warning.jpegs from it so I don't have to look at the warnings on every boot I'll upload it after I'm done with remove and testing, I've been having issues getting it myself I've gone over and over the guides I'm sure it's pretty much the same for getting the .pit file to flash with Odin!
But with that Said thanks in advance!!
Related
Dear all,
After my phone freeze during a umount internal sdcard process, I cant turn it on and it is stuck on Samsung logo.
I can access it through Odin and adb shell, and I discovered there is a corruption table/patition there, as adb parted command reported in /dev/block/mmcblk0: "error: Both the primary and backup GPT tables are corrupt. Try making a fresh table, and using Parted´s rescue feature to recover partitions"
So, I´d like to ask if somebody could help me uploading a valid pit files to be flashed in a i9500 model?
I found a pit in other topic here, but I didnt if it is a valid pit for i9500. So, I cant flash it until Im 100% sure about it. See the pit magic report and adonis.pit attached.
I really appreciate your help!!! Tks a lot!!!
rgbarros said:
Dear all,
After my phone freeze during a umount internal sdcard process, I cant turn it on and it is stuck on Samsung logo.
I can access it through Odin and adb shell, and I discovered there is a corruption table/patition there, as adb parted command reported in /dev/block/mmcblk0: "error: Both the primary and backup GPT tables are corrupt. Try making a fresh table, and using Parted´s rescue feature to recover partitions"
So, I´d like to ask if somebody could help me uploading a valid pit files to be flashed in a i9500 model?
I found a pit in other topic here, but I didnt if it is a valid pit for i9500. So, I cant flash it until Im 100% sure about it. See the pit magic report and adonis.pit attached.
I really appreciate your help!!! Tks a lot!!!
Click to expand...
Click to collapse
Guys, Just to post my experience on trying to revive my S4 i9500: It revived!!!
So, I did this:
1) I used the ROM I9500XXUAMDK_I9500SERAMDK_I9500XXUAMDK_HOME.tar.md5 (link: http://live.samsung-updates.com/) look for your correct ROM by region.
2) The adonis.pit file (see attached on my first post). THIS PIT IS FOR ONLY i9500 S4. Dont use it for other variant!!!!
3) Odin (I used the v3.07, but I think you could use other version)
Ps.: I dont know if is mandatory or not, but my phone was able to connect in it through ODIN and ADB SHELL (Odin is mandatory!!!). So, you need to install all USB and ADB drivers (for the adb drivers I used to AdbDriverInstaller.exe on the link: http://adbdriver.com/upload/AdbDriverInstaller.exe)
4) Put the phone in download mode, pressing button volume down + home + power. The phone will ask you with you like to continue, press up volume button to confirm
5) Open the Odin and marked Auto Reboot, F.Reset Time and Re-Partition options (Re-Partition is automatic flagged when the PIT file is marked/chose.
So, choose the ROM on PDA (Odin will check MD5, so wait it finish to validate the file) and adonis.pit file on PIT field.
PS.: Dont use only pit file. It is mandatory use together the pit file and ROM file. If you flash only pit file, you will brick your phone!!!
6) Press START.
After installation, Odin will return with a GREEN PASSED message!!!
7) The phone will be rebooted and start to finish the instalation.
In my case, the phone revive successfully!!!! :laugh:
I hope this post can help other guys. Use it with carefully!!! For me, this procedure worked like a charm!!! But, use this for your own risk!!!
Good luck!!!
Yay! Congrats mate! Seems like you was out of patience and took the risk of bricking completely your phone.
Sent from my GT-I9300 using Tapatalk 2
demlasjr said:
Yay! Congrats mate! Seems like you was out of patience and took the risk of bricking completely your phone.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yeh friend!! I looked for pit files in many sites and foruns. I just find this pit on a one Chinese site only. So, I looked the Odia post and compared the pit structure there with the pit magic report with the adonis.pit file I got. It was very similar structure and so I decided took the risk!!!
So, the luck was with me!!!! :laugh::laugh::laugh:
Tks so much my friend!!! I hope this post now can help other newbies like me to revive their phones! It's terrible to feel this sensation of torture. hahaha :highfive:
"newbie" like you? A newbie never mess with the partitions hahaha
Sent from my GT-I9300 using Tapatalk 2
demlasjr said:
"newbie" like you? A newbie never mess with the partitions hahaha
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
hahaha good!!!
There is a long time that I use phones based on android system, and I already did a lot of things with them, but mess the partition/table files is the first time!!! hahaha It would be a one more phone that stopped to work in my hands!!! The difference is that phone is a newest phone in the world and dont have enough topics/files availables yet!!! I'm really crazy to did this!!!
I'm ready to put it in root mode again!!!! The saga continues... Now, with more caution!!! :laugh:
ok i searched and find out about pit.
thats great.if i flash pit+ rom = i have clean official rom with no root an no bull****.
my only gps software that worked on my s4 is sygic.with rooted and that junk russian rom ,sygic cannot find SDcard.
i want go back with official
tanx bro.i appreciate.
Hi guys, i also bricked my gt-i9500 pretty bad, Odin just kept failing almost immediately. i used the PIT above but with lollipop india rom from sammobile, know the phone just randomly hangs all the time, any suggestions?
Vergil069 said:
Hi guys, i also bricked my gt-i9500 pretty bad, Odin just kept failing almost immediately. i used the PIT above but with lollipop india rom from sammobile, know the phone just randomly hangs all the time, any suggestions?
Click to expand...
Click to collapse
Hi, sorry to ask this late but, had you solved your problem of random hangs? and if yes then plz tell how?
It still stucks on get pit for mapping
Ps. I have not installed adb on my pc. Please help!!
Hello. First of all: I've tried for 6 hours to figure this one out, this is my last resort, and I hope you can help me.
I've got a major problem. What happened is that I was gonna flash CM 10.1. I wiped cache and all that, flashed the CM.zip, and it failed half way. This resulted in me getting stuck where I am now.
I've found numerous guides, but the problem is, when I download the files, I dont get a .tar or md5.tar(?) file, I only get the folders, like system etc. Ive tried every link Ive found, and the same happens. No file capable of being selected in Odin.
Could any of you, please direct me to where I can download the files needed to flash via Odin? I'm really desperate and tired.
Thibble said:
Hello. First of all: I've tried for 6 hours to figure this one out, this is my last resort, and I hope you can help me.
I've got a major problem. What happened is that I was gonna flash CM 10.1. I wiped cache and all that, flashed the CM.zip, and it failed half way. This resulted in me getting stuck where I am now.
I've found numerous guides, but the problem is, when I download the files, I dont get a .tar or md5.tar(?) file, I only get the folders, like system etc. Ive tried every link Ive found, and the same happens. No file capable of being selected in Odin.
Could any of you, please direct me to where I can download the files needed to flash via Odin? I'm really desperate and tired.
Click to expand...
Click to collapse
http://samsung-updates.com/
Use the link to download a firmware for ur variant
http://www.youtube.com/watch?v=91Z14voZ4Ms
U can try the above link to make a .tar should be possibe
else use my signature link for Q&A there many of my friends will help u
Thibble said:
Hello. First of all: I've tried for 6 hours to figure this one out, this is my last resort, and I hope you can help me.
I've got a major problem. What happened is that I was gonna flash CM 10.1. I wiped cache and all that, flashed the CM.zip, and it failed half way. This resulted in me getting stuck where I am now.
I've found numerous guides, but the problem is, when I download the files, I dont get a .tar or md5.tar(?) file, I only get the folders, like system etc. Ive tried every link Ive found, and the same happens. No file capable of being selected in Odin.
Could any of you, please direct me to where I can download the files needed to flash via Odin? I'm really desperate and tired.
Click to expand...
Click to collapse
That Could be a problem with Your computer then.. When U start downloading the Firmware File what is the name that it shows while it is getting downloaded. It coudl be that there is some Software In your system that automatically extracts the file once downloaded
download a stock firmware from the development forum and try a different computer with odin
I figured out what was wrong. Winrar automatically extracted all directories. Unfortunatly, I flashed again, but rendered the device unbootable. I have no idea what happened. Will get a new one on my insurance.
Thanks for your help guys. Much appreciated.
Should have enough posts to include links now.
These are the stock files I purchased from a persian site for 12$ since nobody had them posted on the forums. Flashed with the latest unmodded Odin. I also had the benefit of suddenly getting data toggle with it after flashing the AP file. Not sure if everyone else will get it too.
https://drive.google.com/open?id=0B0vffDY5Mf5sY1JpY3ViWlV1OVU
I can also confirm that root works with this.
And thanks for the hookup.. lol
i got it recently and going to flash this firmware and will try root.. will reply
Obies said:
i got it recently and going to flash this firmware and will try root.. will reply
Click to expand...
Click to collapse
It works. However, you REALLY need to run the V15 fix script.. The older builds ran like crap, even with the fix script, however with APK1, my phone runs normal and doesn't overheat. However, if you don't run that script with APK1, your phone will run sluggish and hot.
yeah i do aware abt bad lagging after rooted.. anyways my phone is on rooted with Fixes V15 and xposed install with XtouchWiz module so i can use tethering for my laptop/tablet while i am away from home. but no Toggle Data for me.. maybe bad luck but i did odin 4 files and factory reset..
Thanks for this files!
Is this the Stock AT&T PK1 that I have on my phone with the last OTA dated Nov. 1
I downloaded all these files, deleted .rar off the end so Odin would recognize the files (did i do that right?), plugged all 4 files in to the right spots and tried to flash them. I’ve used Odin plenty of times and haven’t had any problems before but I am far from an Odin master. This time I just get stuck at file analysis after i click the start button. Any idea what i could be doing wrong?
jermo said:
I downloaded all these files, deleted .rar off the end so Odin would recognize the files (did i do that right?), plugged all 4 files in to the right spots and tried to flash them. I’ve used Odin plenty of times and haven’t had any problems before but I am far from an Odin master. This time I just get stuck at file analysis after i click the start button. Any idea what i could be doing wrong?
Click to expand...
Click to collapse
You need to decompress the RAR files first using something like 7-Zip (it will extract files with a tar.md5 extension). Those are the files you use in Odin.
jOdin3
hey all,
this is the first non-nexus phone i've used, and I am excited about flashing the U firmware to get a clean stock experience on my g930v. I was wondering what files i should input in jOdin under the PDA/Bootloader/CSC/Phone fields after I extract the zip file SM-G930U? I have searched tried to watch some insufferable youtube videos on the matter have had no luck finding an answer. Also since I'm asking, is it possible to flash this firmware with jOdin3, sorry for the newbie questions, didn't know where else to go.
Thanks in advance to any helpful replies.
Solved the above, no need for replies.
Next though is when I try and flash using Jodin3 the pit file is acquired, the phone reboots and then it stays disconnected and I am unable to start the process after the phone reboots. Any suggestions?
Solved the above by using heimdall to extract pit.
I am close to giving up and flashing anything via jOdin3 I have tried pretty much everything to flash new firmware with no success, latest error is that there is a corrupt file, need to use Odin file...
HAS ANYONE had success flashing a Verizon S7 on macOS? if so please tell me where to look otherwise going to sell this for an 930F version.
Hi all,
Am unable to post on "Samsung Galaxy Tab A series ROMs, Kernels, Recoveries, & Other Development" as I've just signed up, so sorry if this shouldn't go here but I'm struggling to find a download of firmware for my Samsung Tab A6 SM-T585 (UK).
BTU-T585XXU4CRK5 (UK)
If anyone could help me out I'd be really grateful!
Thanks
There you go: http://samsung-updates.com/details/141747/Galaxy_Tab_A_10.1_2016_LTE/SM-T585/BTU/T585XXU4CRK5.html
You will need Odin to flash it.
Thanks very much! Yes I have installed Odin + its dependencies.
Damn, this one is same as other one I downloaded - file(s) are corrupt.
Will not unzip through unzipper applications. When unzipped in command line it seems to work, but Odin complains that the file is corrupt.
Anyone else have this firmware they can share?
Have you tried from sammobile?
Or try from here, or here.
I will suggest downloading all of them in the same time.
Odd that you found only corrupted zips. Maybe is something wrong with ur PC / network?