So I was having issues after receiving my beta streak (only booted occassionally, got into restore factory default once). I followed this guide, along with others to no avail. http://whirlpool.net.au/wiki/dellstreak22
now I cannot boot anything with the device but power it on and get stuck at DELL LOGO. Cant boot holding volume buttons, or with the camera buttons.. nothing will happen. Im stuck, please help me! It seemed to occur after this step:
Stage 4: Upgrading the baseband on the streak
Once the driver is installed, locate and run qdltool.exe from within the \streak subdirectories. When it runs it will present a fairly ugly application which will have “Port” in the top right corner, it should say USB Diagnostics is connected. Click Run and let it run the upgrade, it should take around a minute or so. If it doesn't say USB diagnostics is connected, close the QDLTool program, pull the USB cable out of your PC and then whilst holding "Volume Up" plug the USB cable into the PC – restart the app.
The result of this is that the baseband (firmware of one of the chipsets within the streak) has been upgraded
My HD2 is not booting up at all, just vibrate and show a black screen, I tried to load from USB but still the same, More over cannot even update any ROM as it hangs in 0%. I have my data (contacts n stuff) is there a way to remove everything and reinstall from factory ?? Even the factory hardreset didnt help me as i m able to restore by pressing the VOL up n down key + power key but it says 100% restore (which takes 3 - 4 sec.).
They seven vibrations is not a good sign. This is thought to be a tell tell sign that the device is having CPU malfunction, a corrupt NAND chip, or some other major hardware malfunction. The Hard reset that you tried is sort of proof too that your issue is a hardware problem cause if your processor or NAND either one are not working correctly it can cause the flashing problem you are having. If you have not tried to flash via SD card then try that. If you get the same results you will have to replace the mainboard or just scrap the HD2. I know that sucks but it is the truth.
Hello, i have a blackberry Priv that is stuck on logo and just keeps on restarting and doesnt go to the main screen....how to solve this problem? CAn i solve it by flashing with autoloader
Also, i cant turn on the phone to main screen,
How do i know if it is version:
STV100-1,
STV100-2,
STV100-3,
STV100-4 OR
STV100-5
I downloaded autoloader for STV100-1 and installed drivers too. Now i put phone in fastboot mode by pressing power key and vol - key. I connect phone to pc and run autoloader but window appears and disappears. How to flash this phone and repair this phone....someone pls help
thanks
andrew21 said:
Hello, i have a blackberry Priv that is stuck on logo and just keeps on restarting and doesnt go to the main screen....how to solve this problem? CAn i solve it by flashing with autoloader
Also, i cant turn on the phone to main screen,
How do i know if it is version:
STV100-1,
STV100-2,
STV100-3,
STV100-4 OR
STV100-5
I downloaded autoloader for STV100-1 and installed drivers too. Now i put phone in fastboot mode by pressing power key and vol - key. I connect phone to pc and run autoloader but window appears and disappears. How to flash this phone and repair this phone....someone pls help
thanks
Click to expand...
Click to collapse
Hi,
If you don't know the model #, then don't flash...
I read that Hard Reset of the device is needed, by pressing and holding the volume up and down keys simultaneously for at least 10 seconds, when you reach the error screen
Charkatak said:
Hi,
If you don't know the model #, then don't flash...
I read that Hard Reset of the device is needed, by pressing and holding the volume up and down keys simultaneously for at least 10 seconds, when you reach the error screen
Click to expand...
Click to collapse
I tried to hard reset, enter bootloader mode, enter recovery mode but its all in vain. Moment phone goes to bootloader mode for enter into fastboot it restarts.
By pressing Volume up + Power it takes me to recovery mode there it shows error and again restarts.
Even its not getting connected to pc cause it restarts continuously and in this situation how can I know which model it is and how can I flash new version.
All this happened after Marshmallow update.
Please come up with some solution else this is just a paper weight.
I have the same issue, after Marshmellow update my Priv keep restarting and continuous doing that until the batTrey drain. The phone also heats up and can't find a solution. Tried all kind of reboots but nothing works.
Hoping for a solution before the phone dies completely.
Same issue since 2 days ago
Hello,
I also have the same issue with the PRIV. I spoke with BB Support. They told they will contact me by after 24 hours. I don't know if there won't be any valid warranty since it is an unlocked phone.
Have you find any solution for this?
Please someone help!!
this is because of a wrong flash, you need to use the autoloader appropiate for your unit, with device in fastboot mode run the autoloader, if you do not know your version download all available and flash them, if it is not valid for your unit it wont flash or it wont work, if you swap files to try to bypass and install mm on ll device like att it wont work neither, i have tested this and it works no matter if you swapped files from other autoloaders or not as long you use the correct one your device will be back to life
Same error here...
But if I try to enter fastboot mode (vol-), it reboots after 2-3 seconds...tried also 32 seconds of power on button....any idea?
Thank you,
Chuck26
nicromant said:
this is because of a wrong flash, you need to use the autoloader appropiate for your unit, with device in fastboot mode run the autoloader, if you do not know your version download all available and flash them, if it is not valid for your unit it wont flash or it wont work, if you swap files to try to bypass and install mm on ll device like att it wont work neither, i have tested this and it works no matter if you swapped files from other autoloaders or not as long you use the correct one your device will be back to life
Click to expand...
Click to collapse
Thanks for the tip,
I tried to flash it with one autoloader days ago. It just didn't succeed. The screen went black with unceasing blinking green light.
I kept the contact wit BB Support. They just washed their hands. They told me to go to the Rogers Store where I just bought the PRIV to ask them for a replacement. This is kind of impossible, since I live in Mexico and when the device was bought was on a trip to Vancouver. Yesterday I just plugged in my laptop the phone with the autoloader running hoping something happens. So I left it at home for several hours. When I came back, it was just as before, restarting over and over and over until fastboot menu. So I just gave another try to the autoloader, but it just happened again. Now it remains in black screen and with the green led light blinking. I tried several button combinations over and over just to get to the fastboot menu with no success.
I can't make it to bring up the loading screen and neither fastboot menu.
I guess it was because picking a wrong autoloader for flashing the PRIV. I downloaded another autoloader for trying.
Please help with this.
My PRIV is the STV100-3.
The first autoloader I tried is the Rogers Canada or Orange Slovakia – STV100-3 & STV100-4 - AAF057 Software Version
The second I want to try is the BlackBerry common SW for generic STV100-1, STV100-3 & STV100-4 devices - AAF518 Software Version
This is the link where I got them:
http ://ca.blackberry.com/content/blackberry-com/en_ca/support/smartphones/blackberry-PRIV/reload.html
Thanks in advance!!
nicromant said:
this is because of a wrong flash, you need to use the autoloader appropiate for your unit, with device in fastboot mode run the autoloader, if you do not know your version download all available and flash them, if it is not valid for your unit it wont flash or it wont work, if you swap files to try to bypass and install mm on ll device like att it wont work neither, i have tested this and it works no matter if you swapped files from other autoloaders or not as long you use the correct one your device will be back to life
Click to expand...
Click to collapse
Thanks for the tip,
I tried to flash it with one autoloader days ago. It just didn't succeed. The screen went black with unceasing blinking green light.
I kept the contact wit BB Support. They just washed their hands. They told me to go to the Rogers Store where I just bought the PRIV to ask them for a replacement. This is kind of impossible, since I live in Mexico and when the device was bought was on a trip to Vancouver. Yesterday I just plugged in my laptop the phone with the autoloader running hoping something happens. So I left it at home for several hours. When I came back, it was just as before, restarting over and over and over until fastboot menu. So I just gave another try to the autoloader, but it just happened again. Now it remains in black screen and with the green led light blinking. I tried several button combinations over and over just to get to the fastboot menu with no success.
I can't make it to bring up the loading screen and neither fastboot menu.
I guess it was because picking a wrong autoloader for flashing the PRIV. I downloade n¿another autoloader for trying.
Please help with this.
My PRIV is the STV100-3.
The first autoloader I tried is the Rogers Canada or Orange Slovakia – STV100-3 & STV100-4 - AAF057 Software Version
The second I want to try is the BlackBerry common SW for generic STV100-1, STV100-3 & STV100-4 devices - AAF518 Software Version
This is the link where I got them:
http ://ca.blackberry.com/content/blackberry-com/en_ca/support/smartphones/blackberry-PRIV/reload.html
Thanks in advance!!
leo_ackzion
if the autoloader solution does not work then you need to force manually the unit into flashboot (google how to force fastboot)
then try to flash each content from the img into the device manually same as the nexus devices
the autoloader should be able to recover your device
this is the reload instruction website
http://support.blackberry.com/kb/articleDetail?articleNumber=000038083
this is where the autoloaders reside
http://ca.blackberry.com/content/bl...pport/smartphones/blackberry-PRIV/reload.html
make sure your device is physically an STV100-3 or 4 it is basic to have the proper version
nicromant said:
leo_ackzion
if the autoloader solution does not work then you need to force manually the unit into flashboot (google how to force fastboot)
then try to flash each content from the img into the device manually same as the nexus devices
the autoloader should be able to recover your device
this is the reload instruction website
http://support.blackberry.com/kb/articleDetail?articleNumber=000038083
this is where the autoloaders reside
http://ca.blackberry.com/content/bl...pport/smartphones/blackberry-PRIV/reload.html
make sure your device is physically an STV100-3 or 4 it is basic to have the proper version
Click to expand...
Click to collapse
Hi nicromant.
After several hours I wrote my last comment, the phone showed the fastboot mode, restarting over and over without showing the BB Logo, but only the fastboot menu, constantly rebooting.
Next, I tried to reload the OS via autoloader again. But then my phone again was in black screen with green and white blinking light.
Then I tried to manually force it into fastboot with the Android SDK Tools, but nothing happens.
When I introduce "adb devices" command, it won't show any connected device in the PC.
So I don't know what else I can do.
Please help!
Thanks in advance.
I just had this problem. Took it to the tmobile store i bought it from and they told me it was fried hardware. The phone keeps trying to reboot and fix itself but obviously it can't happen. Their solution? Get a new phone. I had a 2 year warranty and apparently the priv has been having so many problems that the store was offering a trade up deal to a samsung. Hopefully a store near you is doing the same, because thats probably your only option at this point if it's the same problem as mine.
leo_ackzion said:
Hi nicromant.
After several hours I wrote my last comment, the phone showed the fastboot mode, restarting over and over without showing the BB Logo, but only the fastboot menu, constantly rebooting.
Next, I tried to reload the OS via autoloader again. But then my phone again was in black screen with green and white blinking light.
Then I tried to manually force it into fastboot with the Android SDK Tools, but nothing happens.
When I introduce "adb devices" command, it won't show any connected device in the PC.
So I don't know what else I can do.
Please help!
Thanks in advance.
Click to expand...
Click to collapse
Try to install the appropiate ADB and fastboot drivers it is why your pc is unable to see the device, check on device manager if you have it setup properly, unfortunately i do not have a priv anymore (i change devices every 1 or 2 month)
I have same problem with my Priv from AT&T (100-1). It failed to boot after autoloader. it does not turn on. Just LED flashes: White one flash, then Green 3 flashes. and again. I can not force it into fastboot menu anymore holding Power plus Vol down or any other combination.
Need help! Thanks
after updating with this loader
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-common-AAG191.zip
i also cant boot the phone it just show me 4 options on screen but keep on coming back to it no matter what i select
Hold power & vol down both for 32 seconds for a real HARD reboot...
Charkatak said:
Hi,
If you don't know the model #, then don't flash...
I read that Hard Reset of the device is needed, by pressing and holding the volume up and down keys simultaneously for at least 10 seconds, when you reach the error screen
Click to expand...
Click to collapse
I had the same issue quite suddently with no warning. Phone just shut itself off (in a manner similar to what happens when you long press the powre button) Spent hours wondering what to do. Finally Thought the power button was stuck. I slipped a long finger nail into the gap where the power button contacts the phone electronics (dont know how to be clearer than this) to try and separate the power button and whatever it touches when you press it. After a couple of tries, The phone started up successfully. It appears to be a design issue
I FIXED IT!
Same issue as described, bootloop after 10 seconds.
I used electrical tape under and over the flat cable of the power button, also covered the "inner" power button with this.
Now it works for already 1,5 hours and is loading updates.
Also posted this as nes3Ah in crackberry forums, but it has to be released by a mod.
Good luck!
Hello,
It's my first post here, but I've allready read and found many informations on this forum. I'm french sorry for my english !
I have a big problem with my Ownice C500 OL-6666G : Few days ago, when I was BT calling the unit has suddenly stopped and reboot. Since this event, the unit is in a boot loop, it restarts, show boot logo then black screen for 15 seconds and then restarts, etc. I've made a video : h t t p s ://we.tl/t-7buTPOl1NZ
I have search for similar problem but found no solution.
I have tried to :
- Access recovery, but it doesn't work. I've tried many combinations of power button, reset and screen touching... Nothing works. It's only indicate in green "detected" at the upper left corner when boot logo is displayed, then black screen and reboot ;
- Launch a firmware update through USB and SD-Card, same problem, it doesn't launch, it's only indicate in green "detected" at the upper left corner when boot logo is displayed, then black screen and reboot. I've tested many firmware found on this thread : h t t p ://forum.carpad.vn/threads/huong-dan-chay-firmware-dau-owince-c500.23. I've tested 3561s and 3562s versions. I've tested the different USB port and remove all accessories (USb and SD).
I've done many search and maybe there is other solutions, but I need some help :
- Access recovery in order to wipe data or factory reset. But what is the procedure to access recovery on C500 unit ?
- using sdimage like C200 to force firmware update. Unfortunately, I have not found any sdimage for C500. Is this method also compatible with C500 ?
- Using USB cable to connect a portable PC and launch firmware update with RK3 firmware tools (or similar for C500), but I'm not sure this will work since the unit is continuously rebooting ;
- Unlock the bootloader, but I've found no information for ownice unit...
Thanks in advance for your response !
to factory reset:
reset the unit with rst buton, then tap tap the screen with 5 fingers. hope it helps
or when you put the usb with firmware on it, reset the unit with rst buton then slide one finger in the right part of the screen in up/down motion