Hi,
My android head unit stuck on boot logo, even i try to press refresh button it wont work. recovery mode is also not coming. how do i re install firmware using a flash drive? there is no specific name on the head unit since its a chinese one but it have a sticker that says
"7" TOYOTA T3L8035 1 + 16G IPS"
danuja01 said:
Hi,
My android head unit stuck on boot logo, even i try to press refresh button it wont work. recovery mode is also not coming. how do i re install firmware using a flash drive? there is no specific name on the head unit since its a chinese one but it have a sticker that says
"7" TOYOTA T3L8035 1 + 16G IPS"
Click to expand...
Click to collapse
May be you can find something by using this link to search for T3L.
Related
I have a joying px5 4gb 32GB system
I tried to do an update for Android 8
And the system got stuck in the boot loop
The system loads the company logo and then reboots itself
How to fix the problem and reinstall the system
As Joying has several kind of units having different kind of hardware it is easily to flash the wrong firmware.
ALWAYS mention which unit you have and which firmware you (tried to) flash.
Your info is "non-info".
Now blindly assuming you have a FYT unit using the latest firmware for the right resolution you can try:
Put a USB-disk with the firmware in the unit. It might be picked up immediately after reboot.
If not: Put a USB-disk with the firmware in the unit and reset the unit with a pointy thing like a needle.
If that does not help: Put a USB-disk with the firmware in the unit and reset the unit. When the boot logo appears, immediately reset the unit. do this 3x until the leds start blinking pink. Then it will go into forced flashing the unit (if a usb-stick is inserted).
surfer63 said:
As Joying has several kind of units having different kind of hardware it is easily to flash the wrong firmware.
ALWAYS mention which unit you have and which firmware you (tried to) flash.
Your info is "non-info".
Now blindly assuming you have a FYT unit using the latest firmware for the right resolution you can try:
Put a USB-disk with the firmware in the unit. It might be picked up immediately after reboot.
If not: Put a USB-disk with the firmware in the unit and reset the unit with a pointy thing like a needle.
If that does not help: Put a USB-disk with the firmware in the unit and reset the unit. When the boot logo appears, immediately reset the unit. do this 3x until the leds start blinking pink. Then it will go into forced flashing the unit (if a usb-stick is inserted).
Click to expand...
Click to collapse
I have JY-UOS03P4V/
u can bring me the file?
shlomifi said:
I have JY-UOS03P4V/
u can bring me the file?
Click to expand...
Click to collapse
I assume you mean JY-UOS03P4
And which file?
You need the top firmware download from this page: https://www.joyingauto.com/blog/
this one if you have indeed a JY-UOS03P4
My system came with Android 6
I tried to upgrade to 8
It seems that the files that are still sitting in the system are of version 6 also where the same steps are performed?
Where can I download the version 6 back to restore the system and then upgrade it?
shlomifi said:
My system came with Android 6
I tried to upgrade to 8
It seems that the files that are still sitting in the system are of version 6 also where the same steps are performed?
Where can I download the version 6 back to restore the system and then upgrade it?
Click to expand...
Click to collapse
Contact Joying: [email protected]
yo guys i just bricked my head unit everytime i put the key in the ignition wont boot up anymore.
waht i did in flash tool:
i opened "FORMAT" tab and checked "format whole flash except bootlaoder" and pressed START then boom black screen.
MCU1: HW8227L-3.3-SW0-3.1
PLEASE HELP the seller is not understanding waht i need cuz hes chinese. i asked him to provide me the whole firmware.
mediafire.com/file/3d2lhwdzzkn31sv/iap_pv1_8217001_0066.zip/file
q
schmiddi19xx said:
mediafire.com/file/3d2lhwdzzkn31sv/iap_pv1_8217001_0066.zip/file
Click to expand...
Click to collapse
are you stupid? i can't access MCU cause it's BRICKED
Hello guys. First of all, I've been searching for weeks for any similar situation with mine but couldn't find anything. I have Unbranded Chinese Android Head Unit running Android 4.2.2. with physical button and a reset pin. I tried tonnes of ways to get to the recovery with any possible method and nothing seems to be working.
can anyone show me how to get into recovery or force hard reset on the unit ?
I have attached a few pictures of the Unit info and the circuit board.
i tried to connect a USB keyboard to my Unit and pressed PrtScr + "E" but my unit did not show factory rest option. you can see what happened in the attached video
i will be thankful for you, if you tell me how to get into recovery mode of make a hard factory rest or install a new ROM.
Thanks in advance .
Post MCU version
marchnz said:
Post MCU version
Click to expand...
Click to collapse
the unit stuck on boot logo so i don't know MCU vesion. i just want to know how can i boot the unit in recovery mode
Emad Islim said:
the unit stuck on boot logo so i don't know MCU vesion. i just want to know how can i boot the unit in recovery mode. i attached a a picture of the chip on main board of the unit maybe this can help
Click to expand...
Click to collapse
I have android screen on my Mitsubishi Lancer 2017. Running android 10.
I install VIVID launcher after restart the screen stuck on Android logo the screen working but stuck on Android. The screen name gulf melano running android 10 , I want to know which software I can install on it using flash disk fresh install
AzizAhmed2021 said:
I have android screen on my Mitsubishi Lancer 2017. Running android 10.
I install VIVID launcher after restart the screen stuck on Android logo the screen working but stuck on Android. The screen name gulf melano running android 10 , I want to know which software I can install on it using flash disk fresh install
Click to expand...
Click to collapse
contact seller of your device and ask him for update, or if you can find a suitable software on this forum, look for your model of device
You're best bet is to go to the market and ask them to do it, it wont cost too much considering you have a chinese multimedia system.
Apart from this, on the front of the screen, above the touch buttons, their is a hole with the word "RST" written next to it. Take a pin and press it in the hole so that he swtich is pressed for about 60 seconds while the car is on, that might be able to reset the system and remove the launcher allowing you to use the system again normally.
If that doesn't work, try following a guide like in this video, then factory reset the system from recovery. I know its not the exact same system, but most chinese multimedia units are quite similar (you can find more tutorials like this one, by searching "How to enter recovery mode on chinese headunit", try all of them, one of them should work for you):
If you bought it online, ask the manufacturer to send you the firmware, then look for a tutorial on how to flash firmware to a chinese headunit.
I got a headunit for my bmw but it doesnât seem to have any bmw logo loaded on to it to set the boot logo. Where can I get them from
BTW... The boot logo is only shown on cold boot.
Actual units do not even need to cold boot in normal usage. Just the first boot-up will show this logo.
rigattoni said:
BTW... The boot logo is only shown on cold boot.
Actual units do not even need to cold boot in normal usage. Just the first boot-up will show this logo.
Click to expand...
Click to collapse
My units boot logo shows every time I start my car. Currently only shows the android logo
Attached the units firmware
asad5150 said:
Attached the units firmware
Click to expand...
Click to collapse
The MCU is still missing in here.
The firmware is not that important.
If the unit is an 8-core unit in this case the unit is not connected correctly, because it should then have a deep sleep mode.
Where do I find the mcu version ? I believe it is a 8 core unit
asad5150 said:
Where do I find the mcu version ? I believe it is a 8 core unit
Click to expand...
Click to collapse
On the same page as you showed the firmware version
rigattoni said:
On the same page as you showed the firmware version
Click to expand...
Click to collapse
Any help guys