what to do ?
i was flashin from std. wm5 to 6.1 and it's usb linked led off / stuck on this screen
help
boodi said:
what to do ?
i was flashin from std. wm5 to 6.1 and it's usb linked led off / stuck on this screen
help
Click to expand...
Click to collapse
happen to me once, i think its because of the rom problem, compatibility issue perhaps, the rom just would flash after several attempt, just flash back the original rom or use another one.
how can i flash the rom? can i use the SD card way?
boodi said:
what to do ?
i was flashin from std. wm5 to 6.1 and it's usb linked led off / stuck on this screen
help
Click to expand...
Click to collapse
did u do this steps?
Hello,
i have a HTC Elf 128/256 with rom ONYX 3.0 (after hard reset ).
The USB connector in built-in the phone is a kind of broken:
can charge the battery with the USB cable but can't synchronize.
The device is discovered with errors in windows task bar.
I tried to sync some more phones and they work.
Now i want to use the warranty but the phone has a cooked ROM.
Is there anyway to reset the phone to a warranty supported ROM?
I have tried to flash with the sdcard but had no results in the tricolor menu.
If someone has any suggestion, i really need it!
Thanks!!
piriri007 said:
Hello,
i have a HTC Elf 128/256 with rom ONYX 3.0 (after hard reset ).
The USB connector in built-in the phone is a kind of broken:
can charge the battery with the USB cable but can't synchronize.
The device is discovered with errors in windows task bar.
I tried to sync some more phones and they work.
Now i want to use the warranty but the phone has a cooked ROM.
Is there anyway to reset the phone to a warranty supported ROM?
I have tried to flash with the sdcard but had no results in the tricolor menu.
If someone has any suggestion, i really need it!
Thanks!!
Click to expand...
Click to collapse
What kind of SPL do you have on your Touch? What;s your device CID?
You should be able to flash a stock ROM (if one exists) from SD for sure.
Hello,
here is the info you asked for:
Device ID: ELF010050
CID : HTC__506
IPL: 2.20.0002
SPL: 2.26.0000pof
ROM version : 2.27.80.1
ExtROM version : Cooked by dsixda
Operator version: Onyx 3.0
AKU version : 1.2.6
Page Pool: 8 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0300
Part Number: 99HEH034-00
MCC+MNC: Not found
I can access the Storage Card from the file Explorer in the ELF, but can´t flash the ROM.
I am trying to flash with a cooked rom (ONYX 4.0). This process should only bedone with stock ROM's or it works with cooked rom's too?
Thanks!!
I already tried to flash the ELF from the SD Card with the stock ROM that suits my CID and SPL.
No results flashing from the card.
When the ELF boots in tricolor mode, how can i start the flashing process?
Any help would be appreciated!!
Thanks!
Hello piriri
on the ELF upgrading forum, look for the one that says restoring your Touch via the bootscreen.
once on bootscreen, make sure you have the original stock rom (check the HTC site for details). ELF for ELF, ELFIN for ELFIN. If you're using an ELF, get the 1.11x rom, flash it and you'll be back. 2.20x for elfin.
make sure you uncheck the part that makes your usb connect "advance network connectivity" on your settings. then your elf will be fine.
peace
Hello Samaral
First thank you for your answer, but i can´t synchronize the ELF to computer through USB, i have the USB connector broken in the phone!
I need to flash a ROM without using the USB cable!
I tried flashing from the SD Card but it's not starting thr flashing process...
Maybe i can have a help from someone??please??
Thank you!
piriri007 said:
Hello Samaral
First thank you for your answer, but i can´t synchronize the ELF to computer through USB, i have the USB connector broken in the phone!
I need to flash a ROM without using the USB cable!
I tried flashing from the SD Card but it's not starting thr flashing process...
Maybe i can have a help from someone??please??
Thank you!
Click to expand...
Click to collapse
Make sure your SD is formatted in FAT32 not FAT
I've got the same problem,is it possible to do a rom update via bleutooth?
Hello
I have this problem since i change my rom to Onix( i don't remember what version)
Bu if you try several times one time it gonna work and then put the other ROM ( I put Onyx 4.0) and know works great.
Sometimes you have to put the cable and wait 5 minutes to start the sync.
Try and then tell us if you succeed.
joao M
It might be this..
On some devices I've noticed that the metal strips within the connector (in the phone, top part of the connector usually) looses away from its original position, this actually results in the problem you mentioned. If its not broken you may be able to unbend it and restore it to the original position with a thin pin or something of that sort. This should make things work again.
To prevent this from keep happening just be carefull when you plug/unplug your cables into it. Be gentle when inserting the cable and make sure to put the pressure to insert it only when its in the exact position.
hope this helps... good luck
Try first
Hi Piriri
another simple check before all the rom flashing,
1-change the cable, worked for me more than once.
2-go to Settings>>>Connections (in some roms System)>>>>Usb to Pc>>>>uncheck "enable...etc".
I hope it helps
Hi, what´s the name of file by flash from sdcard? in polaris the name is POLAIMG.* and in elfin?
Install the latest activesync
My guess is that your pc is running windows xp.. and you have not installed the latest activesync on your system.. you can download the latest activesync installer(version4.5) from www.microsoft.com/en/us/downloads.aspx/.. install that and then reconnect your device.. if you are running windows vista.. try to update the usb drivers.. again you can download these drivers from microsoft.. you will have to search for the appropriate drivers and then install them..
If you want to send it back under warranty, mine went back to tmobile with a cooked rom. they didnt say anything but flashed it with the rom that looked like a stock nike rom!
when you enter in bootloader mode before the trecolor screen you can see a white screen flasing, well, at this white screen is where you can flash from the sd, if your phone dont stay there and ask you to press power buttom to flash its cause you havent a proper sd, i meant fat 32 formated sd with ONLY one file in it named elf0img.nbh, if you use it correctly it have to work por narices
hi,
i flashed my blackstone and after reset my phone start with crazy things.
smart mobility are white until in right corner shows version, then smart mobility are some kind of light green color and right after htc logo is like 4or 8bit in winxp safe mode some kind of no nice color, as well as manilla but only till i press power button then again and all colors are fine. when this problem occured i flashed again and again with onkologs superlite flash then with light and after with duttys new one.
sory mine english suck.
thanks for help
Did you use the new HSPL 1.56?
had the same problem with the latest ROM...
Going back to the older ROM worked fine for me...
Just curious if the new HSPL will solve the problem with the new ROM.
pilnik11 said:
hi,
i flashed my blackstone and after reset my phone start with crazy things.
Click to expand...
Click to collapse
Same problem for me but only after I installed the screen hotfix from HTC site. was this the case with you too or have you not installed hotfix?
Just install the new HSPL and you'll be fine.
I had this problem before, until I found this:
http://forum.xda-developers.com/showthread.php?t=505377
Hi All,
I'm have HTC Elf0100 (not a clone - bought at Orange France).
Preparing for full unlock I've dumped my original ROM following:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
After dumping ROM and packing it back, I've tried to upload it to ELF back (together with IPL/SPL).
As it was dumped from my device I didn't expect to have any issues, but when upload reached 100%, Elf rebooted as normal and it was the last time when I saw anything on display.
Currently even when I'm connecting USB cable I don't see any light of charging (orange LED close to speaker).
I tried already to execute bootrom screen (power on + camer button) but it seems to not work.
Does any one of you have any advises what to do now?
I've checked all the subjects related anyhow to bricking the phone, booting, etc under Elf forum and subforums but didn't find any working solution.
I hope I missed one working as I'd like to get it back to live.
Thanks in advance for any help,
Dawid
p.s. if any other information are needed, please let me know and I'll be happy to provide them.
Why not you try to gold card your phone and flash back the stock rom?
Hi All,
i have problem with my china android Headunit i tried to install root from this post "https://forum.xda-developers.com/t/...droid-8-1-2020-twrp-magisk-and-dolby.4205037/"
my head unit is YT9216CJ 2Gb Ram 16 GB Rom, and according to this instruction i changed 2 files in original file ( preloader.bin and recovery.img ) but when i flashed by Flash Tool my radio is dead, in 99% i also tick preloader so this is probably the reason why now i have pice of brick not a radio ;(
only buttons are highlight, i tried to unbrick by test point but Flash tool always send me a error "Enlabe DRAM Fail".
In the picture is the last version of software what I have in this device
My computer have windows 10
Guys could you please help me ?
Sorry for my English
Nobody doesn't have any ideas how to fix this ?
maybe somebody can send me memory dump from equal device ?
i think i tried almost everything, every time is ended on Flash tool error DRAM Enable Failed,
szefuncio2015 said:
Hi All,
i have problem with my china android Headunit i tried to install root from this post "https://forum.xda-developers.com/t/...droid-8-1-2020-twrp-magisk-and-dolby.4205037/"
my head unit is YT9216CJ 2Gb Ram 16 GB Rom, and according to this instruction i changed 2 files in original file ( preloader.bin and recovery.img ) but when i flashed by Flash Tool my radio is dead, in 99% i also tick preloader so this is probably the reason why now i have pice of brick not a radio ;(
only buttons are highlight, i tried to unbrick by test point but Flash tool always send me a error "Enlabe DRAM Fail".
In the picture is the last version of software what I have in this device
My computer have windows 10
Guys could you please help me ?
Sorry for my English
Click to expand...
Click to collapse
Hi I have similar device but my device is not detected by my computer. How can I take so flash tool backup
Hi I have made a video tutorial on how to make stock ROM backup
Hi friends,
Have you are observed overheating of touch panel of your car stereo or hangs in your Android car stereo or system not responding or application keep crashing etc.
Then this video is for you. I have done this small modification in my car.
I made a small hole on sides of AC vents such that cool air blows over the heat sink of Android car stereo and two cpu fans of 12V take power supply from same connector.
Whenever the car stereo is turned ON the fans also turn ON and blow cool air over the heat sink to keep it cool.
Hi I have made a updated video tutorial with added info on how to make stock ROM backup.
[UPDATE][ROM Dump] Stock ROM backup of Android Car Stereo | Memory Dump Procedure via flashtool
Try this brand new guide