Related
please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???
tell use more what did you do and how did you do it?
what artemis is it?
what rom was it
Flash went sour..
You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?
please i need help too
I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says
IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90
OS 1.28.0.0
DOPOD
I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?
it should be the same as my problem
if i remeber than i used the same ROM Update :-(
I hope anyone could give us a solution, please.
@dr. moppi we can only help you if we know what version you had before.
@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.
Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check. Either way, you'll probably have to pay to get it fixed.
how to install original rom
Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?
Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.
thanks anyway
i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. i really appreciate your help though Pyth.
Where can i find the t-mobile rom its the MDA Compact III that wont start for me
All started with trying to upgrade(rewrite) the GSM part because the Hermes had problems with phone part - when trying to call - the phone stop responding, bus the pda part sill worked.
So - I tried and tried and tried again, reading many threads about HARD SPL,Flashing radio, etc. Nothing worked..
In the end "i managed" to kill GSM - phone had "No Gsm" on boot-up.
From there i tried to downgrade SPL to 1.04 so that i try to "raw" rewrite the GSM part.
But something went terribly wrong, and while downgrading SPL, the phone suddently shutdown and never opened again.
Now i have the folowing situation: NO BOOTLOADER, no usb conectivity, nothing
This means that i cannot connect via USB whatever i try.
Is there any hope for me? or is it TOTALLY BRICKED?
Any help is apreciated!! I can even dismantle the mobile if there is any way to flash it via some kind of jtag connection...anything ...
The folks at www.imei-check.com can do the JTAG flashing. Just email them. It would be costly for you to do it yourself...
Are you saying that the phone won't turn on at all or that it does but you can't get a bootloader screen?
Have you tried taking the battery out for a while? Have you tried flashing an OEM rom and radio compatible with your device off an SD card?
All of this info is in the wiki, as are OEM roms you can flash.
Let us know how you get on.
Good luck.
WB
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
@wacky.banana: The phone is totaly dead: no bootloader, doesn't boot at all, doesn't seem to have any USB conectivity at all. Flashing from micro sd doesn't work : probably because the bootloader isn't working.
@drummer10630: i'll check with imei-chek about jtag flashing, especially the price and shiping costs.thanks
@markafreeman: I tried, but when i put the battery in, the red light goes off, not to amber . no soft or hard reset helps. not even leaving the battery out for 2 weeks - i had tried that too . thanks anyway.
Anything else I can try? - phone totaly dead, no bootloder, no usb conectivity - cannot use mtty, cannot flash from microsd
I had to get a replacement device at that point when it happened to me.
Maybe someone else know a way to get it working.
Good luck.
get onto orange
tell them you dropped the phone
and it crashed and wouldnt turn on
so you managed to hard reset it
and it crashed an ****ed up
they'll replace it
well they will send it to HTC
who just replace the handset rather than repair it
Hi dancameo2k , maybe you will not remember but plz:
I ve bought recenty an spv m3100, im effortless trying to flash the rom to an wm6 version.
Like you ive started with the hardsppl flash thing to prevent bricking it and prior to sd flashing... and im not sure if its workin...
plz can you explain in detail how did you bricked it??? thx!!!!
the rom you used to flash was an american version or european one???
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!
Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time
Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.
Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol
Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up
I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks
need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas
kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...
Hi everyone!
My friend has got the HD Mini and put Android on it. After AD crashed some programs didn't work after restart and so he wanted to install a new ROM on it. Everything worked fine until the installion got 100% suddenly the screen got black and showed this message:
Software update failed.
Please try again.
He tried again but nothing worked. No reset, nothing....
Can anybody help ??
Try to put a original Rom, first take out the battery, put the battery again, tham old the volume down, push the power buton, the screen will be in three colors, connect the usb cable, and flash the original Rom.
You need to download the original Rom, from the Htc site, with the Hd Mini serial number.
malima17 said:
Try to put a original Rom, first take out the battery, put the battery again, tham old the volume down, push the power buton, the screen will be in three colors, connect the usb cable, and flash the original Rom.
You need to download the original Rom, from the Htc site, with the Hd Mini serial number.
Click to expand...
Click to collapse
Okay I did as you said, but we only got Error [276].....
And the tricolored screen doesn't look normal
but thx
it's the update error.just make a soft reset and launch the Ruu again.
ps:do you flash you device with the original rom?
Is very important you flash the original Rom, see in this post how to discovery the region of your Rom http://forum.xda-developers.com/showthread.php?t=799923&highlight=Malima17
We used the original ROM but always the software update error appeared.
My friend can be lucky that he's got guaranty so he sends it to htc...
But thanks!!!
look at my thread : http://forum.xda-developers.com/showthread.php?t=1041988 - with a (HD MINI) in your same situation I have repaired everything with my procedure. perfect. be quiet.
Procedure with the stock rom with activesync, having your screen, absolutely does not work, 'cause in your situation is corrupt to boot. With SDCARD method avoids the problem and create the boot from sdcard-
Hi all,
Bought a brand new HTC Trophy from an auction site but has no warranty.
Going to contact HTC to see if they can provide some type of support.
Downloaded Zune and updated the phone fine the first time. It then mentioned another update was available so went through the process.
The last screen on the update said : Waiting for phone to reboot.
Now I watched the phone for over 30 minutes and it was stuck/frozen on the HTC logo when powering on so I switched this off thinking something had happened.
Now I'm unable to even power on the unit, factory hard reset or anything. Has anyone experienced this before?
Regards,
John
Try going on HTC's website and asking their support staff if they will repair it under the general warranty?
Yeah I've emailed HTC but of a language barrier. Kept mentioning to return to my dealer, however I didn't buy it from a dealer. Will see how I go.
Hello,
Make a gold card with the Y cable and unbrand the Trophy, and then put other ROM in it, it will work with Y cable process.
Regards
johna8 said:
Hi all,
Bought a brand new HTC Trophy from an auction site but has no warranty.
Going to contact HTC to see if they can provide some type of support.
Downloaded Zune and updated the phone fine the first time. It then mentioned another update was available so went through the process.
The last screen on the update said : Waiting for phone to reboot.
Now I watched the phone for over 30 minutes and it was stuck/frozen on the HTC logo when powering on so I switched this off thinking something had happened.
Now I'm unable to even power on the unit, factory hard reset or anything. Has anyone experienced this before?
Regards,
John
Click to expand...
Click to collapse
Howdy, I am in the same boat. My HTC Trophy (Verizon brand) comes on and goes to the bootloader screen with red, green, blue and white and thats all it will do. It doesn't even show it's charging. How do I get a rom on this device? I have tried somse roms from ansar but none work> this is actually how it got to **** state of a paper weight. Can someone walk me through step by step how to get my phone working. Thanks
prootc1 said:
Hello,
Make a gold card with the Y cable and unbrand the Trophy, and then put other ROM in it, it will work with Y cable process.
Regards
Click to expand...
Click to collapse
Hi prootc1, you sure? I can't even power on the phone at all. Nothing comes on the screen - it's like a 100% brick with no response?
what is gold card? how can i get an original rom for htc trophy for verizon? phone is stuck in the color screen.
Hello,
I already test on a sticky logo Trophy, and it work.
You need:
1- a Y cable (make or buy one),
2- download the original and oldest ROM for it,
3- Make the gold card to unbrand it and do the process
It should work, say something...
Regards
Any news?
Any news ? I'm exactly in the same case than you Johna... Please give us a feedback...
prootc1 said:
Hello,
I already test on a sticky logo Trophy, and it work.
You need:
1- a Y cable (make or buy one),
2- download the original and oldest ROM for it,
3- Make the gold card to unbrand it and do the process
It should work, say something...
Regards
Click to expand...
Click to collapse
Hi Prootc1, my phone initially had a stuck HTC logo and was forced to power it off. Since then, the phone will not respond to any keys / power on at all. It's pretty much 100% bricked with no responses/leds/lights emitting.
I'm wondering if I do find a repair service that offers JTAG, may be the only way? but this is assuming the phone can be switched off to reflash?
Anyways an update is that I've taken it to our local comms provider who are sending it away for service. Will hear back whether it's under warranty or not.
Hi Prootc1, my phone initially had a stuck HTC logo and was forced to power it off. Since then, the phone will not respond to any keys / power on at all. It's pretty much 100% bricked with no responses/leds/lights emitting.
Click to expand...
Click to collapse
I have the exact same issue
I'm wondering if I do find a repair service that offers JTAG, may be the only way? but this is assuming the phone can be switched off to reflash?
Click to expand...
Click to collapse
Is it possible to do it ourselves?
Anyways an update is that I've taken it to our local comms provider who are sending it away for service. Will hear back whether it's under warranty or not.
Click to expand...
Click to collapse
I've send an email to HTC to describe the case, hope they'll answer soon.
I keep you informed...
hello,
can anyone put in threecolor mode? bootloader?
If yes, then use these instructions.
http://forum.xda-developers.com/showthread.php?p=10176994#post10176994
Regards
can anyone put in threecolor mode? bootloader?
Click to expand...
Click to collapse
No
I guess it's hopeless
Thank's for your help prootc1
Was sent away and have a replaced phone.
Hi, I have boot issues with trophy stuck at boot HTC white screen and nothing else.
When it starts make 4 times vibrate and then nothing.
I can access the 3 color mode but I have try to update and can't connect to pc.
ansar rom problem
Hi Ansar, I have a problem since I did a soft reset htc setting the trophy to leave the factory, made a number of actions to restart, and stayed frozen in the picture there is no step HTC.
Well I'm from Spain to investigate it and I said I'll install the official rom Vodafone Spain
9_22.32.50.10U_by_ansar RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.2
While the flash starts but when it comes to 10%, I get a message Flash Write Error (# 226) @ 12%
and there is no progress, and researched and found this
ERROR [226]: FILE WRITE
This Could Indicate That the downloaded image (. Nbh file) is corrupt, re-download the image.
and I downloaded the image again but nothing
some solution concept .????? thanks from Spain
LEFTKOYL said:
Hi, I have boot issues with trophy stuck at boot HTC white screen and nothing else.
When it starts make 4 times vibrate and then nothing.
I can access the 3 color mode but I have try to update and can't connect to pc.
Click to expand...
Click to collapse
Hey LEFTKOYL,
Can you try the RSPL/HSPL tool?
I've given WickedPenguin a guide which should help you (assuming your on the correct boot loader version)...Get that tri color screen and note down the SPL details.
http://forum.xda-developers.com/showthread.php?t=1207721
I too am having the multi-color screen appearing. I plugged my phone into my computer last night for the first time and it said there was an update. I left it running and came back to a 'failed update' message and this screen. From the pieces I have gathered, from reading in the developer section, it appears I am hosed. There is not a SPL unlock for my model of the Trophy, which apparently goes by the name 'SparkW for Verzion' as well. This was not a pleasent way to start my day.
use this method by ansar
Use this method by Ansar ..
http://forum.xda-developers.com/showthread.php?t=1000656
not that the method are the same but if you are not using HTC vodafone France you can use a different rom from here
http://forum.xda-developers.com/wiki/HTC_Trophy/Shipped_Roms
you can also try the Gold card method too...
If your phone is completely dead .. you can do JTAG brick repair .. if you want someone to do it for you ..you go to mobileTechvideos here :
http://mobiletechvideos.mybigcommerce.com/
you can also use the gold card method here too :
http://forum.xda-developers.com/showthread.php?t=893152
Hope any of this works for you
Enjoy
You can bye me a $2 beer
here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YWB555YTP6Z42