Database Users

Allwinner T3 P1 Quadcore Android 10 - Firmware and MCU??

Hi guys, I bought a Seicane H6032N head unit from Aliexpress with 32gb rom and 2gb ram. The about info of the unit states this is an android 10 unit however I skeptical this is the case. The stock firmware on this device is horrible, slow and the phone app does not even function. Seller ended up refunding half the purchase price, $80USD.
Now, what I would like to know is if there is a firmware out there and mcu update for a lower android version or real android 10?. All head units seem identical and I am curious if it is even possible to install a firmware from a similar enough head unit, i.e T3 P3 etc?
Please see the attached screenshots and any help/info is welcome

Hi, i got the same unit as well. While I'm happy with the sound it produces, it lack the performance i need. Even the internal memory is only at 23GB instead of 32GB as advertised, not even close! How did you managed to get a partial refund? My seller on Ali have yet to reply my queries.

izammo said:
Hi, i got the same unit as well. While I'm happy with the sound it produces, it lack the performance i need. Even the internal memory is only at 23GB instead of 32GB as advertised, not even close! How did you managed to get a partial refund? My seller on Ali have yet to reply my queries.
Click to expand...
Click to collapse
The head unit was advertised as having an SD card slot, had issues with the phone app on the head unit and advertised as android 10 which I highly doubted. After going back and forth with the seller and finally opening a dispute, the seller eventually just agreed to refund half the purchase price for me to cancel the dispute.

Hi I have one I can confirm you that is android 10 but mine is completely blocked can't even root it! I finally sold the Android 10 unit to buy an Android 8 one which I can easily root and install interesting app... Personnaly I will not recommend Android 10 Units it is to recent...

I have the same head unit.
Do you have problems that the radio / music playback is stopping when these apps go in background?
Does anyone has a solution to fix the problem.
I´m not sure, maybe the unit runs a fake android 10.
Any compatible rom available?

I have the same unit and want to update the music app since it doesn’t show album art. In some areas, it says it’s a K2001q and others K2101q in settings. Anyone know how to update the stock music app?

Cann bus code
Hello, do you have a canbus code for this android?

t3 k2001n nwd
도움이 필요합니다.
Allwinner T3를 사용하고 있습니다.
버전 7.1.1을 사용하고 있습니다. 하지만 너무 느립니다. Android 버전을 4 또는 6으로 다운 그레이드하고 싶습니다. ROM 파일과 MCU 파일을받을 수 있습니까? 복구 모드로 전환하는 방법을 알아낼 수 있습니까? 부디.
k2001n
프로세서 유형 : 쿼드 코어 T3
1GB 메모리 16GB 스토리지
Android 버전 7.1.1
appver : k2001_nwd_s212202.20191130.15414472.n0026.01
platformver :
k20n-2019 / 10 / 28-1.00
mcuver :
v3.0-ff01-20190909 -a02-can0000-00-00-dvd00000000-00
btver : v.19.11.29a
감사합니다. 좋은 하루 되세요.

Greetings
Suddenly my T3 P1 Allwinner is unable to detect / connect and pair with Bluetooth devices. Formerly it worked fine.
The Bluetooth devices are ok, I tested them with the smartphone and they were found and paired without a problem.
Is it possible that I changed an important setting without noticing it?
I tried so far:
*unplug and reconnect the Bluetooth devices
*unpair (delete) all
*soft reset
*changed the code from 0000 to 1234 and viceversa
What more I can test or do? Would be very happy if someone could enlighten me and help.
Thank you

Recomand
I also have a quad core t3 p1 navigation and since I made some changes to the settings when I start it it always opens the extra settings menu. you don't know how to turn it off extra settings. Thank you.

Hi
I have exact the same issue. Have to touch on "home" to see the desired home screen again.
Any ideas? Someone please?

exact. or the back button. : ((

Cipboy79 said:
exact. or the back button. : ((
Click to expand...
Click to collapse
Ok, today I decided to make the factory reset (car settings --> factory reset --code 7890 or 123456.)
Then after some long minutes the original status was recovered. Home screen ok as it should. Shows up first
!! Of course, save and back up your APP and data if needed !!
Tomorrow I will reinstall my preferred apps and look if that factory reset make the bluetooth work again too.

bekawe said:
Ok, today I decided to make the factory reset (car settings --> factory reset --code 7890 or 123456.)
Then after some long minutes the original status was recovered. Home screen ok as it should. Shows up first
!! Of course, save and back up your APP and data if needed !!
Tomorrow I will reinstall my preferred apps and look if that factory reset make the bluetooth work again too.
Click to expand...
Click to collapse
Not work.

Meteorit said:
Hello, do you have a canbus code for this android?
Click to expand...
Click to collapse
try 1617 this should work

The factory reset does it for me (Allwinner T3L (T3 P1)

bekawe said:
Greetings
Suddenly my T3 P1 Allwinner is unable to detect / connect and pair with Bluetooth devices. Formerly it worked fine.
The Bluetooth devices are ok, I tested them with the smartphone and they were found and paired without a problem.
Is it possible that I changed an important setting without noticing it?
I tried so far:
*unplug and reconnect the Bluetooth devices
*unpair (delete) all
*soft reset
*changed the code from 0000 to 1234 and viceversa
What more I can test or do? Would be very happy if someone could enlighten me and help.
Thank you
Click to expand...
Click to collapse
J'ai exactement le même problème, impossible d'appairer mon téléphone. Pourtant après une mise à jour tout est OK, mais dès que je coupe l'alimentation, c'est de nouveau impossible de connecter le Bluetooth.
HELP...................................................

techtel said:
J'ai exactement le même problème, impossible d'appairer mon téléphone. Pourtant après une mise à jour tout est OK, mais dès que je coupe l'alimentation, c'est de nouveau impossible de connecter le Bluetooth.
HELP...................................................
Click to expand...
Click to collapse
You tried to go to car settings, extra setings to enter the code 123456, then there you have to config info and there you have to check something for bluethooth but I don't know exactly which of those. try them one at a time. I also suffered because I unchecked an option there

Cipboy79 said:
You tried to go to car settings, extra setings to enter the code 123456, then there you have to config info and there you have to check something for bluethooth but I don't know exactly which of those. try them one at a time. I also suffered because I unchecked an option there
Click to expand...
Click to collapse
Try this, but in my case it does not help

Chinese Head Unit ZXDZ 01 (8227L Android 9) Query

HI there..
I have a Chinese made Android Head Unit running Android 9. The brand is called ZXDZ_01 Car Navigation Head Unit. What I realized is that this head unit doesn't have audio panning (panning front and rear) as left and right is available. Is there any way I can install a 3rd party app or configure to have that function enabled? I've tried Alpine TuneIt app (the UI got enlarged at some point which I cannot access other UI options), I've tried Poweramp app (this app somehow sucked on volume adjustment which it sounded really lame), I've tried Noozxiode EIZO-rewire PRO (this app really didn't do much).
Aside from that, the Head Unit has an update via OTA, downloaded it but failed to install (it popped out Error with the Android robot laying down). Attachments are given below. In addition to that, I stumbled upon a page within the Head Unit that it says 8227L_demo before I renamed it to a specific name for identification for device connection.
Though it's a Chinese brand, it sounds really good actually with the absent of the fader option BUT I do prefer to have the front and rear fader option as I don't want the front speakers to handle the audio output similar to rear ones as the rear ones are capable to handle the output (kinda like a F 30% - R 70% audio output bias, give or take).
And, this unit is kinda slow (touchscreen and touch button). With MTK processor and 1GB RAM and 16GB Storage, the specs sucked I know BUT if you guys can help/ advise me on getting it to run slightly smooth, responsive AND most importantly splitscreen capability is suffice. Good thing WIFI ok nonetheless it's slow, GPS is ok.
Device description below :
Model : ZXDZ_01
Android version : 9.1.0
Android security patch level : July 5, 2018
Kernel version :
3.18.79+ (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
[email protected] #4
Mon Sep 30 12:27:43 CST 2019
Build number : ZXDZ_2019.09.30.12_1100
MCU version : CVD1810-WJ_19.08.22_309
If any of you guys can help, I really appreciate it. Thank you.

i hace tus dame unir and the fadder dont work and i try with diferentes ROM and no one works i recomend install the app Viper 4 FX i instalo in mu unit and works very very sello
enter in this forum and you want find everything for you divice i recomend you-!!
https://forum.xda-developers.com/an...-firmware-chinese-7-head-unit-ac8227-t3931863
i hope this help you

Maro433 said:
i hace tus dame unir and the fadder dont work and i try with diferentes ROM and no one works i recomend install the app Viper 4 FX i instalo in mu unit and works very very sello
enter in this forum and you want find everything for you divice i recomend you-!!
https://forum.xda-developers.com/an...-firmware-chinese-7-head-unit-ac8227-t3931863
i hope this help you
Click to expand...
Click to collapse
Thank you. Appreciate it. :good:

I just received the same unit and discovered the same issue. Mine was sold through banggood as the iMars A75789, but the model in the ROM is the same as yours. I really don't like that it has no fader, EQ, or even simple bass/treble controls. I tried downloading different apps for EQ and some of them work, but none of them autostart when I turn on the unit from sleep. Did you ever find a solution?

Nazrae said:
HI there..
If any of you guys can help, I really appreciate it. Thank you.
Click to expand...
Click to collapse
i had this problem, you must disconnect the flash Memory from headUnit and do the update , its will work.

Apk equlizzatore
Salve buongiorno, sono nuovo nel forum, possiedo la stessa unità cinese con android 10.1 falsa , in pratica lo stereo funziona perfettamente solo che manca un equilizzatore generale, qualcuno sa come recuperare un apk di questo equilizzatore?

how to update
APP:ZXDZ_2019.09.17.20
MCU: CVD1800-W_19.08.02_014

Nazrae said:
HI there..
I have a Chinese made Android Head Unit running Android 9. The brand is called ZXDZ_01 Car Navigation Head Unit. What I realized is that this head unit doesn't have audio panning (panning front and rear) as left and right is available. Is there any way I can install a 3rd party app or configure to have that function enabled? I've tried Alpine TuneIt app (the UI got enlarged at some point which I cannot access other UI options), I've tried Poweramp app (this app somehow sucked on volume adjustment which it sounded really lame), I've tried Noozxiode EIZO-rewire PRO (this app really didn't do much).
Aside from that, the Head Unit has an update via OTA, downloaded it but failed to install (it popped out Error with the Android robot laying down). Attachments are given below. In addition to that, I stumbled upon a page within the Head Unit that it says 8227L_demo before I renamed it to a specific name for identification for device connection.
Though it's a Chinese brand, it sounds really good actually with the absent of the fader option BUT I do prefer to have the front and rear fader option as I don't want the front speakers to handle the audio output similar to rear ones as the rear ones are capable to handle the output (kinda like a F 30% - R 70% audio output bias, give or take).
And, this unit is kinda slow (touchscreen and touch button). With MTK processor and 1GB RAM and 16GB Storage, the specs sucked I know BUT if you guys can help/ advise me on getting it to run slightly smooth, responsive AND most importantly splitscreen capability is suffice. Good thing WIFI ok nonetheless it's slow, GPS is ok.
Device description below :
Model : ZXDZ_01
Android version : 9.1.0
Android security patch level : July 5, 2018
Kernel version :
3.18.79+ (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
[email protected] #4
Mon Sep 30 12:27:43 CST 2019
Build number : ZXDZ_2019.09.30.12_1100
MCU version : CVD1810-WJ_19.08.22_309
If any of you guys can help, I really appreciate it. Thank you.
Click to expand...
Click to collapse
Nazrae said:
HI there..
I have a Chinese made Android Head Unit running Android 9. The brand is called ZXDZ_01 Car Navigation Head Unit. What I realized is that this head unit doesn't have audio panning (panning front and rear) as left and right is available. Is there any way I can install a 3rd party app or configure to have that function enabled? I've tried Alpine TuneIt app (the UI got enlarged at some point which I cannot access other UI options), I've tried Poweramp app (this app somehow sucked on volume adjustment which it sounded really lame), I've tried Noozxiode EIZO-rewire PRO (this app really didn't do much).
Aside from that, the Head Unit has an update via OTA, downloaded it but failed to install (it popped out Error with the Android robot laying down). Attachments are given below. In addition to that, I stumbled upon a page within the Head Unit that it says 8227L_demo before I renamed it to a specific name for identification for device connection.
Though it's a Chinese brand, it sounds really good actually with the absent of the fader option BUT I do prefer to have the front and rear fader option as I don't want the front speakers to handle the audio output similar to rear ones as the rear ones are capable to handle the output (kinda like a F 30% - R 70% audio output bias, give or take).
And, this unit is kinda slow (touchscreen and touch button). With MTK processor and 1GB RAM and 16GB Storage, the specs sucked I know BUT if you guys can help/ advise me on getting it to run slightly smooth, responsive AND most importantly splitscreen capability is suffice. Good thing WIFI ok nonetheless it's slow, GPS is ok.
Device description below :
Model : ZXDZ_01
Android version : 9.1.0
Android security patch level : July 5, 2018
Kernel version :
3.18.79+ (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
[email protected] #4
Mon Sep 30 12:27:43 CST 2019
Build number : ZXDZ_2019.09.30.12_1100
MCU version : CVD1810-WJ_19.08.22_309
If any of you guys can help, I really appreciate it. Thank you.
Click to expand...
Click to collapse
Encontraste alguna somucion amigo???? Tambien tengo el mismo problema no trae panel para editar el adio de cada parlante asi como la del subwoofer

GnatGoSplat said:
I just received the same unit and discovered the same issue. Mine was sold through banggood as the iMars A75789, but the model in the ROM is the same as yours. I really don't like that it has no fader, EQ, or even simple bass/treble controls. I tried downloading different apps for EQ and some of them work, but none of them autostart when I turn on the unit from sleep. Did you ever find a solution?
Click to expand...
Click to collapse
Encontraste alguna solucion amigo????

Hello,
I have the same device but I need to change the starting logo but I need the setting password. Anyone know what is the setting password?
Thanks

[QUOTE = "Bill _G, post: 84219207, member: 11375741"]
Здравствуйте,
У меня такое же устройство, но мне нужно изменить начальный логотип, но мне нужен пароль настройки. Кто-нибудь знает, что такое пароль настройки?
благодаря
[/ QUOTE]
000000

This forum is english language??

Bill _G said:
Hello,
I have the same device but I need to change the starting logo but I need the setting password. Anyone know what is the setting password?
Thanks
Click to expand...
Click to collapse
Pass for factory settings probably is: 8888
A little disclaimer: If you change the boot logo to something with a wrong format you risk bricking the unit...

Allan_Hun said:
Pass for factory settings probably is: 8888
A little disclaimer: If you change the boot logo to something with a wrong format you risk bricking the unit...
Click to expand...
Click to collapse
I have ZXDZ with password 000000 for carsettings options....

Btw. Does anybody knows about wiring of these devices. I can't find any more info than this but what is for example the connection for rear camera 12v trigger input?

Wild guess Socket A pin 5: Reverse ?

With which application can control the sound of the rear and front speakers?

Allan_Hun said:
Wild guess Socket A pin 5: Reverse ?
Click to expand...
Click to collapse
Right. A5 is it. It works now. At the end is was easy. The AV of rear cam is connected to B6 so I was convused. Thnx.

I have a similar system but its more updated. however the sound is pathetic and in the name of equaliser it has just bass and treble control. external equalisers dont stick just like op said. any easy way to inject equaliser as stelio player sounds really good so its not a hardware issue.

Sounds really good???
So you don't hear any noise in quiet parts of a track if you play at low volume with engine off?
I guess speakers with high sensitive would make the static noise more obvious. But I find it so bad that I think it would be quite obvious with normal oem car speakers.

Microphone problem in bluetooth phone calls Junsun V1 Pro

I have a Junsun V1 Pro unit and when I make a bluetooth phone call they tell me that they hardly hear me. If I am with the car stopped, something they listen to me. If I'm on the go, there's no way they'll hear me well. I do not know what solution you can have or if you can put an external microphone.
My car is a Seat León with standard bluetooth installation. I don't know if I could use the car microphone in any way. I think the car microphone cable goes to the radio, but I have nowhere to connect it to the Junsun equipment. Let's see if someone can help me.
Thank you

ojerez01 said:
I have a Junsun V1 Pro unit and when I make a bluetooth phone call they tell me that they hardly hear me. If I am with the car stopped, something they listen to me. If I'm on the go, there's no way they'll hear me well. I do not know what solution you can have or if you can put an external microphone.
My car is a Seat León with standard bluetooth installation. I don't know if I could use the car microphone in any way. I think the car microphone cable goes to the radio, but I have nowhere to connect it to the Junsun equipment. Let's see if someone can help me.
Thank you
Click to expand...
Click to collapse
Junsun offers a second wiring harness which allows a lot of additional connections. E.g. for AUX in and to connect a amplifier. One of the connections is a 3.5 mm mono jack for a microphone. You can create an adapter to connect the Oem mic of your car.

TorstenH said:
Junsun offers a second wiring harness which allows a lot of additional connections. E.g. for AUX in and to connect a amplifier. One of the connections is a 3.5 mm mono jack for a microphone. You can create an adapter to connect the Oem mic of your car.
Click to expand...
Click to collapse
I have exactly the same problem with this head unit.
Microphone (built-in) is virtually useless, my unit came with an external mic (free gift) which I have connected as you suggested using the second harness.
The problem is this is no better.
Checking the system with 'mictests' app it shows a problem with mic volume. My question is how do you access a volume control, I have been unable to find one.

PETEJAN said:
I have exactly the same problem with this head unit.
Microphone (built-in) is virtually useless, my unit came with an external mic (free gift) which I have connected as you suggested using the second harness.
The problem is this is no better.
Checking the system with 'mictests' app it shows a problem with mic volume. My question is how do you access a volume control, I have been unable to find one.
Click to expand...
Click to collapse
Don't think there is a setting for microphone sensitivity/volume.
An option could be to remove the internal microphone (seen a lot of tutorials) or test with another mic.

Hello,
I'm facing the same problem. Firstly, I thought that the sensitivity might be the problem but the microphone amplifier app didn't help. Do you think that any update or a custom rom could solve the issue?
Thank you

Even I had this mic issue so found a way out attaching a tutorial video
hope that helps

Shreyas17 said:
Even I had this mic issue so found a way out attaching a tutorial video
hope that helps
Click to expand...
Click to collapse
Thank you for sharing but menus looking completely different to my Junsun V1

TorstenH said:
Don't think there is a setting for microphone sensitivity/volume.
An option could be to remove the internal microphone (seen a lot of tutorials) or test with another mic.
Click to expand...
Click to collapse
Through Ali express, I chatted with the junsun company and they sent me a tutorial for removing the internal mic and put it back. It worked just for a day. I texted back and they sent me an external mic. The first time worked OK, today I had a call and my friend couldn't hear me well. So, now I have a 3.5mm jack to port another mic.
I hope a new good-quality mic solve the problem.

tsoump said:
Through Ali express, I chatted with the junsun company and they sent me a tutorial for removing the internal mic and put it back. It worked just for a day. I texted back and they sent me an external mic. The first time worked OK, today I had a call and my friend couldn't hear me well. So, now I have a 3.5mm jack to port another mic.
I hope a new good-quality mic solve the problem.
Click to expand...
Click to collapse
Did you settle with another good quality micro?

Yes. The result with a 6 euro philips (almost the same) mic, is much better. My friends can hear me at least. But, I would suggest a more expensive mic to replace with.
In addition, I would say also that it needs somehow a noise canceling set. I don't know if it's possible.

tsoump said:
sim. O resultado com um microfone philips de 6 euros (quase o mesmo) é muito melhor. Meus amigos podem me ouvir, pelo menos. Mas, eu sugeriria um microfone mais caro para substituir.
Além disso, eu diria também que ele precisa de alguma forma de um conjunto de cancelamento de ruído. Não sei se é possível.
Click to expand...
Click to collapse
OBRIGADO PELA RESPOSTA, MAS ISSO É O QUE EU NÃO CONFIEI. MESMO COM UM MICROFONE MELHOR, O SOM É UM RUÍDO.
Os microfones bluetooth originais do carro têm circuitos com uma placa embutida que deve eliminar o ruído, mas você não pode aplicá-lo. Eu tentei, mas não funcionou.

I've the same issue with my junsun v1 pro.
Calls are completely useless, full of noise and the other person can never hear me. I sent a message to the seller and he told me he was sending me an external mic.
I have unsoldered the micro that came in the radio and I have put the new one with the same result. calls cannot be used.
Apart from this there is a small delay like 1/2 second between when I speak and the other person hears it, so the calls are a complete mess.
Anyone knows if it is any solution? If I buy a better micro maybe the problem will be solved?
thank you all!

Same problem here (among others). Is there any external mic which works fine? A parrot external mic would work?
Thanks.

The problem is a fact and everyone has it.
The external mic helps a bit, but the small delay and the noise aren't solved.
So, the problem might comes from the software (or a terrible quality of the combination of mic, wires, bt).
1.So, does anybody try to use another app of calling?
2. Is it possible to find on play store a different tool which supports Bluetooth?
3. What about custom firmwares?
4. What about external BT earbuds?

Hello,
I have a problem with the internal microphone of my junsun v1 pro when I make a call or I receive a call people are not waiting for me. me yes I also tested with an external microphone the problem and the same.
Do you have a solution to the problem.
Sorry for my English

That call quality issue is so annoying Other than that I love the device. Today I tried with an external mic from the brand FISCON. It improved the quality a bit, but it’s still not good enough. Especially when doing business calls. Does anyone have a solution on how to make the microphone quality usable?

I purchased a Junsun M8925 late in 2021 subsequently installed in a Nissan Quashqai \Dualis J10- The unit works fine except the internal Mic was rubbish. I installed a external mic ( I think it is a cheap external mic that came with another Joying head unit) and the Mic sound is better but still not great.
I have attempted to adjust the BT Mic volume in the Factory setting menu but this has resulted in no Improvement.
I am going to install a Pioneer or Sony high quality mic in the next couple of days and report back if it works any better.
cheers
Marc

Hi, I also have the same problem with Junsun v1 4+64. However, for some reason it works better when I use the CarPlay (I have an iPhone). I wonder if it is a software issue or the iPhone/CarPlay uses another mic?
Also, my car (Peugeot 4007 which is basically Outlander 2) has an in-built microphone which I used for calls before I got the HU and it worked well. Is there a way to use the HU with my car mic?

I don
RomarioZuev said:
Hi, I also have the same problem with Junsun v1 4+64. However, for some reason it works better when I use the CarPlay (I have an iPhone). I wonder if it is a software issue or the iPhone/CarPlay uses another mic?
Also, my car (Peugeot 4007 which is basically Outlander 2) has an in-built microphone which I used for calls before I got the HU and it worked well. Is there a way to use the HU with my car mic?
Click to expand...
Click to collapse
I do not know, somehow they must connect to each other. Sounds difficult.
Have you found why the car play works better? Does your iPhone uses its own microphone?

tsoump said:
I don
I do not know, somehow they must connect to each other. Sounds difficult.
Have you found why the car play works better? Does your iPhone uses its own microphone?
Click to expand...
Click to collapse
I've look into CarPlay forums and apparently CarPlay uses whatever microphone the head unit does. So if it's an aftermarket HU, CarPlay would use the HU mic. They say CarPlay definitely does not use the phone mic because it is designed in a way that you would just toss the phone out of reach for safety reasons.
However, what might make a difference is that I link my CarPlay with a cable, not bluetooth. The bluetooth connection could be the issue here. Which is weird because it's otherwise quite stable.
I saw a video of a guy using another aliexpress HU (SC7862) who is able to switch to the car microphone from the settings of the HU (
). I don't know however if Junsun offers such an option.

Carplay AI box upgrade Android

Hello,
I bought this Android carplay box:
Android 7.0 Carplay AI Box 4+32G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im using it in Mercedes Class A250e with last MBUX.
The central touch console works very well with the box, but in car steering wheel controls dosent work. And i think that i need to upgrade for Android 9 for working with car steering wheel controls.
So, my question is:
How i can upgrade the android version? and Where is that compatible Android version for this Android AI box?
Thanks a lot

kkdoxy said:
Hello,
I bought this Android carplay box:
Android 7.0 Carplay AI Box 4+32G
View attachment 5204337
Im using it in Mercedes Class A250e with last MBUX.
The central touch console works very well with the box, but in car steering wheel controls dosent work. And i think that i need to upgrade for Android 9 for working with car steering wheel controls.
So, my question is:
How i can upgrade the android version? and Where is that compatible Android version for this Android AI box?
Thanks a lot
Click to expand...
Click to collapse
For me, only the volume control button works from the steering wheel controls. None of the other button works. I am using in Honda Accord.

Firmware for Carplay AI Boxes (Qualcomm/Rockchip/Allwinner) Android 7/9
Firmware for Carplay AI Boxes (Qualcomm/Rockchip/Allwinner) Android 7/9/11/12/13 Telegram-Channel for Discussion (Please Click) This thread is created to provide/maintain firmwareupdates and discuss problems/bugs of firmwares for Carplay AI...
forum.xda-developers.com

shaiq123 said:
For me, only the volume control button works from the steering wheel controls. None of the other button works. I am using in Honda Accord.
Click to expand...
Click to collapse
This 4-core box is not easy to use. The Qualcomm 8-core box is perfectly compatible with the original car's touchpad, steering wheel buttons, scroll wheel, and knob operations. Those who can operate CarPlay can operate this box.

kkdoxy said:
Hello,
I bought this Android carplay box:
Android 7.0 Carplay AI Box 4+32G
View attachment 5204337
Im using it in Mercedes Class A250e with last MBUX.
The central touch console works very well with the box, but in car steering wheel controls dosent work. And i think that i need to upgrade for Android 9 for working with car steering wheel controls.
So, my question is:
How i can upgrade the android version? and Where is that compatible Android version for this Android AI box?
Thanks a lot
Click to expand...
Click to collapse
Latest 4+64G Android 9 is here : https://www.aliexpress.com/item/100...o.store_pc_groupList.8148356.2.778a29c4kFBysr

carplay retrofit said:
Latest 4+64G Android 9 is here : https://www.aliexpress.com/item/100...o.store_pc_groupList.8148356.2.778a29c4kFBysr
Click to expand...
Click to collapse
Be careful, i think this box is fake android 9. No split screen and off-centered usb C indicates it is android 7. You would be better to purchase from joyeauto.com or motor-media on facebook.

I have the Allwinner CP600P 4/32 running
The 2021-06-28 update. It came from Alibaba seller with a really old firmware. Bluetooth didn’t work out if the box which is what led me to come across this forum.
I cannot get Bluetooth to work. It turns on then off right away.
Purchased a usb dongle (Plugable 4.0) and same thing- doesn’t work.
All I want to be able to do is connect to Bluetooth OBD2 devices for gauges. That’s all I care about as I already have wireless CarPlay. Can someone help me?
2020 Audi RSQ8
iPhone 12 Pro Max
Dropbox - File Deleted - Simplify your life
www.dropbox.com

DAP56 said:
I have the Allwinner CP600P 4/32 running
The 2021-06-28 update. It came from Alibaba seller with a really old firmware. Bluetooth didn’t work out if the box which is what led me to come across this forum.
I cannot get Bluetooth to work. It turns on then off right away.
Purchased a usb dongle (Plugable 4.0) and same thing- doesn’t work.
All I want to be able to do is connect to Bluetooth OBD2 devices for gauges. That’s all I care about as I already have wireless CarPlay. Can someone help me?
2020 Audi RSQ8
iPhone 12 Pro Max
Dropbox - File Deleted - Simplify your life
www.dropbox.com
Click to expand...
Click to collapse
Buy a cheap Phone that ist rootable and use Android Auto Hacks and AAAD, also depending on your mib Version of your Audi you can Take a Look at this: https://github.com/jilleb/mib2-toolbox You also find newer firmwares for your cp600p in my firmwarethread.

LwannaCM said:
Buy a cheap Phone that ist rootable and use Android Auto Hacks and AAAD, also depending on your mib Version of your Audi you can Take a Look at this: https://github.com/jilleb/mib2-toolbox You also find newer firmwares for your cp600p in my firmwarethread.
Click to expand...
Click to collapse
Thank you so much. you think my box is bad, or not meant to pair with OBDeleven?
Thanks for the toolbox. Ive been trying to get CarPlay to appear in the VC, which is enabled on the Audi TT only. I don’t know if it will help with that or not.

LwannaCM said:
Buy a cheap Phone that ist rootable and use Android Auto Hacks and AAAD, also depending on your mib Version of your Audi you can Take a Look at this: https://github.com/jilleb/mib2-toolbox You also find newer firmwares for your cp600p in my firmwarethread.
Click to expand...
Click to collapse
Your FW thread is where I got the 2021-06-28 update from (and I still have the Bluetooth issue) Thanks for posting those updates. Best info on the net for this stuff

shaiq123 said:
For me, only the volume control button works from the steering wheel controls. None of the other button works. I am using in Honda Accord.
Click to expand...
Click to collapse
Yes, because your turn the volume in your car not the AI Box. when you use an USB remote to change volume you will see another volume bar at the middle.
I have the same issue on my Lexus, the button on the steering doesn't work. The odd thing is the pick up/hang up phone button works. And I am 100% sure is controlling the AI box because my phone Bluetooth only connects to the AI box not the car.

Hi I have a fake android 9 cp600, where I can find files to upgrade

All the firmwares are post in here:
Firmware for Carplay AI Boxes (Qualcomm/Rockchip/Allwinner) Android 7/9
Firmware for Carplay AI Boxes (Qualcomm/Rockchip/Allwinner) Android 7/9/11/12/13 Telegram-Channel for Discussion (Please Click) This thread is created to provide/maintain firmwareupdates and discuss problems/bugs of firmwares for Carplay AI...
forum.xda-developers.com
Make sure you use Android 7 firmware only. Do your research first before installing the rooted firmware.

LwannaCM said:
Firmware for Carplay AI Boxes (Qualcomm/Rockchip/Allwinner) Android 7/9
Firmware for Carplay AI Boxes (Qualcomm/Rockchip/Allwinner) Android 7/9/11/12/13 Telegram-Channel for Discussion (Please Click) This thread is created to provide/maintain firmwareupdates and discuss problems/bugs of firmwares for Carplay AI...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi,
I purchased a Carlinkit cpc200 tbox November 2021 (great product) and has been working perfectly.
Until this week, when it has stopped booting up. It will get to a black screen with android in the centre, it looks like it frozen but after 30 to 60 seconds turns off and try to reboot, with the same result.
When the unit is powered up there is a solid green and red light, after 15 seconds green light starts flashing,
after 30 to 60 seconds the red light disappears and 15 seconds later green light disappears. It seems as it is
Rebooting again.
I would like some help to fix problem.
Is this a firmware problem.

maw.casa said:
Hi,
I purchased a Carlinkit cpc200 tbox November 2021 (great product) and has been working perfectly.
Until this week, when it has stopped booting up. It will get to a black screen with android in the centre, it looks like it frozen but after 30 to 60 seconds turns off and try to reboot, with the same result.
When the unit is powered up there is a solid green and red light, after 15 seconds green light starts flashing,
after 30 to 60 seconds the red light disappears and 15 seconds later green light disappears. It seems as it is
Rebooting again.
I would like some help to fix problem.
Is this a firmware problem.
Click to expand...
Click to collapse
"(great product) and has been working perfectly.
Until this week, when it has stopped booting up."
I'll just leave this here.

Just a reminder. Please join the telegramchannel:
Carplay AI Box Friends
New CarplayBox Wiki (FAQ): BEFORE YOU ASK ANY QUESTIONS, PLEASE read the WIKI or use the search functions in telegram. https://youneedawiki.com/app/page/1VtEXFHDVBjClMayeYptKMQ27Dz19bx6Hty0koZWsvEw?p=1JsHvvxuXSL4epjUqSsVRmJIIb_Buy4JN
t.me
or use this faq:
FAQ_Carplay_Ai_Boxes
F.A.Q. on UX999(Pro/Plus)/QM8888/APM888/CPC200/AI996(N)/etc. Join Telegram-Channel for more help: https://t.me/CarplayAiBoxFriends Before you do anything stupid (switching firmwares, using rooted images, etc.) to your device, make a backup of your paritions! Tools and guides for this you will f...
docs.google.com
i have not enough time right now to answer questions here on xda

Ownice Auto Ai Box, it seems this is the newest outlook, they provide two options from $129
A1 - Qualcomm Quad Core, 3G & 32GB, Android 11.0
A3 - Qualcomm Octa Core, 4G & 64GB, Android 9.0/10.0
https://www.aliexpress.com/item/3256804336986363.html
I saw it on Facebook and they offer a promotion code OWNICE15 for $15 off at checkout

Buongiorno a tutti, scrivo qui per un problema e se è possibile un aiuto visto che il venditore cinese mi ha scritto "è un prodotto nuovo e stiamo piano piano migliorando tutte le funzionalità".
Ok iniziamo a spiegare:
Ho acquistato un carplay wireless AI Box 3 in 1 su aliexpress.
Funziona molto bene, ma ha un bag!!
Se imposti la lingua del sistema su inglese, ed entri nell'app bluetooth alla voce "rubrica", sulla sinistra si trova una finestra che ti permette di selezionare un nome con le iniziali delle lettere invece di comporre il numero e fin qui tutto è OK .
Mentre se si cambia la lingua del sistema in inglese, nell'elenco telefonico non viene più individuato la finestra di ricerca con il nome e bisogna scorrere l'intero elenco fino a visualizzare il nome desiderato se il nome inizia con zo la v è un trauma al dito scorrendo la rubrica.
qualche utente di questo favoloso forum può aiutarmi?
Ho il firmware originale che mi ha dato il venditore.
allego il link del prodotto:
https://www.aliexpress.com/?spm=a2g0o.detail.1000002.1.74512e8a6Y1Rnj
Chiedo scusa nel caso ho sbagliato post.

buongiorno, qualcuno può aiutarmi con il mio problema di cui sopra? in allegato il firmware originale che mi ha fornito il venditore.
Grazie di cuore a tutti, soprattutto a chi mi aiuta

Eunavi Android 10 PX6 4+64g issues

Grab a coffee or a soda cause this will be a bit of a ride.
If I'm posting this under a wrong section, please let me know as this is my first post and I signed to XDA 10 minutes ago.
Just bought this radio 10 days ago from AliExpress to upgrade from my 2+32g px5 Android 6 to something newer.
My Px5 A.6 worked fine, SWC always on point, Radar/Sensor interface showing on top whatever was playing on radio when I pressed the Sensor Button, AC controls interface ETC.
I had my PX5 hooked on External amp (JL XD800v2), Dynaudio speakers and Passive Radiator box.
Where the PX5 was NOT shining was the amp signal on RCA's and the "9 band" equalizer which was actually a 3 band divided in 3 sliders.
A parametric EQ box under the seat, solved this issue somehow. There was significant increase in midbass but it was still muddy.
THIS is where the Eunavi comes in with built in DSP. Reason i chose this over the XTRONS or JOYING is cause of its appearance (8" screen w/ volume knobs), also it matched my old PX5. Small volume knobs and sleeker design over the Xtrons.
Also, Eunavi has better DSP (5.1) than Xtrons (4.1) (digital chip TDA7803A vs TDA7851).
THE GOOD
- RCA signal: Major improvement over the PX5. I calibrated the PX5 with 3/4 Volume and a sinewave generator. Hooked up a Voltmeter and set it up as per JL's recommendation which is 28.3V on subs (50hz) and components(1000khz). Hooked up the PX6 with same settings, Voltage on amp went up to 53V, had to tune it down to 28.3.
- 30 (or 32) bands of EQ with Q Factor for each band and each frequency can be fine tuned to whatever you want (ex. 30hz band slide it to 31,32................60hz) to match your preference.
-Time delay for each speaker
-Aditional fine tuning for each speaker, from what to what hz you want each speaker to respond.
THE BAD
- Radio would reboot EVERYTIME i would pull out and insert the key. It's not a wiring issue between constant 12V and signal. Already checked those.
- SWC: Even when chosen the right CanBus with model and year, "prev" & "next" would not work. Choosing different makes, will make them work but you'll lose your "mute" and AC interface on screen
- Radar/Sensor interface: I have front and rear P. sensors and would like the "car" interface to show on screen whenever they're on and NOT only on reverse. I didn't have this issue with the PX5.
Alternate route on trying to fix this issue. In settings, there was an option " support standby". I checked this box being sure it'll fix the restart issue.
Yes it DID fix it. But when it would "wake up" from standby, the WiFi wasn't working anymore. Even if manually clicking it on, it would turn back off. So I unchecked this box.
Under "module" there was another setting "Delay shutoff when ACC off". Max option for this was 2 hours. Now, when i would take the key out, the radio would falsely "shut off". No signal to the amp so no battery drainage. But after 2 hours it would restart when I would put the key in.
Seller sent me a firmware of android 10. This was a 2020 version compared to what the radio had (2021).
I lost the DSP, radio STILL reboots, No video on reverse, no sound and CanBus it's still doing the same ****ty job with SWC and P. Sensors interface.
Current status with ALiExpress. I'm blocked to send message to ANY seller because i was trying to find a way to call the seller to help me with the firmware. Also he was taking a long time to reply and I was trying to fix these issues before the "dispute" time is up.
I was mentioning "whatsapp", "viber", "skype", "messenger", and i would get this "abide with local laws and policies" message but i could care less cause I'm not a politician.
Little do i know, these app names got me BANNED to message any seller on Ali Express, so my only "warranty" was to open up a dispute.
I do have sellers email so he asks me to cancel dispute, but I'll do that when my issues are fixed.
I asked him to try and send me the original OS to at least get the radio back to where it was.
Current status with Eunavi radio. It sits here in my house with less functional Android 10, trying to find a solution to the problem.
-What could cause the Wifi to die when waking up from standby?
-Why P. Sensors only show on Reverse and not on any screen (like px5)
-Why SWC don't work?
Please if anyone could chime in...
If pics or more info are needed, let me know. I'll find a way to upload them and post them.
P.S. I upgraded the px5 from A.6 to A.10 and installed it back to the car. Runs smoothly.

Ciao ti parlo in italiano perchè il mio inglese è scarso.Ti faccio una domanda il tuo eunvi è il y47?quello con ventola di raffreddamento?Pultroppo non ho una buona esperienza con eunavi il primo è morto dopo 7 messi,la seconda eunavi è arrivata con diversi problemi,fili invertiti per far funzionare la ventola di raffreddamento,obd2 non si collega proprio.Per quanto riguarda il tuo problema fatti inviare il firmware originale per la tua autoradio,ho risolto alcuni problemi con la vecchia in questo modo.