Hi all,
I was playing around with my tablet SM-T580 and it seems like I messed up.
When I start it, a message appears "an error occured.... use the emergency recovery function in the smart switch pc software".
So, the only thing I am able to do is enter the download mode (Samsung STD boot menu or twrp are not possible).
But here are the bad news. It seems like the tablet connects only for a few seconds and then the connection is gone.
If I try to flash it with the Odin tool the flash progress starts but never finish it (same with the SamFwFRPTool). The "ID:COM" does not disappear but I really think afert a few seconds the flash progress always stucks. Same when I go to the download mode and start flashing just a couple minutes later, nothing starts.
Here are some information from the download mode:
- ODIN MODE
- DOWNLOAD SPEED: FAST
- ...
- CURRENT BINARY: CUSTOM
- SYSTEM STATUS: CUSTOM
- FRP LOCK: OFF
- Secure Download: Enabled
- WARRATY VOID: 1
- RP SWREV: B:2 K:0 S:1
Is there anything else I can try? I'm running in circles when I am not able to flash it anymore...
Thank you very mutch!
Peter M.
Related
Sooo it's about 3 days that I'm having problems with my Samsung Note 4.
The phone is about 6 months old and I tried to root it when I bought it without success, so I put the original firmware again (As after successful (or insuccessful?) rooting the phone keept bootlooping all the time). With a few tricks (that I cant remember) i made it working again.
3 days ago I was charging the phone while browsing on google chrome and the phone suddenly turned off and went in a bootloop. I tried installing the original firmware again (Odin says "PASS!" at the end of the process) but it still wont go work. Tried to wipe cache and data, still nothing. Samsung Kies wont recognize my phone to do an emergency recovery.
Another strange thing is that I can enter in download mode but not in recovery mode.
"ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START"
That's what it says in download mode and have no idea what it means.
Anyone can help? Im about to freak out
Thanks in advance
Anyone?
Still none? Im using my phone as paperweight right now..
alpacino15 said:
Still none? Im using my phone as paperweight right now..
Click to expand...
Click to collapse
Are you using genuine usb cable? it's a must. Also do NOT use USB 3 port
My company issues the Verizon flavor of Galaxy Tab 4 8.0 for our users that are out in the field. It seems like this one particular user (or someone close to them) decided to try and root the device in order to get around the restrictions we have on them via a MDM client. When the tablet boots (even when trying to go into recovery via power+home+volume up) it goes to the triangle screen saying "System software not authorized by Verizon Wireless has been found. Please turn off and go to the nearest Verizon store". But unfortunately the store turned us away saying there's not much they can do. I am able, however, able to get it into download mode.
So far I've tried flashing the Verizon Stock 4.4.4 firmware, which I found searching around here, via Odin 3.10.7. It gives every indication that the process completed and shows the green "PASS" block up top. When the tablet reboots from flashing, it still goes to the triangle screen. Once the triangle screen comes up, upon reboot there's a lock at the bottom of the boot screen and the word "Custom", shown here: http://i.imgur.com/5PC0qeZ.jpg. It seems like maybe the bootloader isn't correctly being overwritten or something. When the tablet is in download mode, it says the following in the top left (after I've already flashed it a few times):
Odin Mode
Product name: SM-T337V
Current Binary: Custom
System Status: Official
Reactivation Lock(KK): Off
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A2, P1
Secure Download: Enable
UDC Start
I'd like to think I'm not a total novice with this stuff, but I'm at a bit of a loss at the moment. Where should I go from here? I've read from a different thread about the note 3 that sometimes you have to flash the .pit file again in order to nuke the partitions, but so far I haven't been able to find one I feel comfortable enough to try.
Hi,
i'm having some trouble with my note 4. so i recived the note from a friend and she told me what was the problem. the problem is that she would turn it off then when she trys to attempt to turn it back on it will show the samsmung boot screen then all black with the blue and white(maby baby blue, i cant tell exacly)and sometimes boots a 2nd or 3rd time. leave it like that and the phone would start getting hot. so i used odin and installed a freash BL, CP, and CSC. then i left the phone withpout the battery for about 10 minute's then i put the battery back on and turned it on. it worked! but after a while i accidentaly turned it off. the same problem was back(i dont know if this is important but when ever u tryed to update the software it would alway's fail). so i thought why dont i just install freash clean OS and i whont have to face this problem again. i installed android 5.0.1 and it did not work, this time the blue adn white notification light was not on. so i installed it again but only the BL. the light was back. please help me on what to do or give me a link to a legitament clean OS. i've tryed every trick! pull out the battery then press and hold the power button to drain out the ramining power and leave the phone for about 10 min. try to go in recovery mode(when i try to do this, it goes all black also), install a clean freash OS, ECT. im running out of options! what should i do! it cant be the hardware because everything was working fine. it cant be the screen because i've personally seen the screen work perfectly fine, plus the samung boot logo( the "samsung galaxy note 4 powered by android" boot). i dont know what to do!
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
noob4598 said:
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
Click to expand...
Click to collapse
imsorry but i am unable to post a link nor a picture due me being a new user.
but it does say this:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910A
CURRENT BINARY: SAMSUNG OFFICAIL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDCSTART
A while back my friend gave me his tablet to try and fix. He was screwing around in odin and did a nand erase. From my research it seemed I needed a pitfile to fix it. This weekend I was clearing out some junk and found the tablet so decided to give it another try. I was actually able to finally find the pit file, so I downloaded odin, the pitfile, and the newest lollipop. In odin, I loaded the pit and selected repartition. Odin goes through the process, reboots the tablet to the little android guy it loads then reboots again and it hangs on the Samsung Galaxy Tab 4 screen and won't go any further. I can access recovery and download mode still and according to the recovery logs the OS installed and is there, it's like this thing isn't setting the boot partition correctly or something. Anyone have any experience with this, or able to tell me if I'm doing something wrong.
Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the incon
I am attaching pics of what it says please help
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp serve s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?any thoughts
tammster37601 said:
Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the incon
I am attaching pics of what it says please help
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp serve s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?any thoughts
Click to expand...
Click to collapse
get rid of it and get a t377p you be alot happier
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
1.Try doing wipe data before flashing the firmware.
2.Try flashing Stock LP firmware.
3.Try to flash using Heimdall, which doesn't have some restrictions that Odin has.
4.Nand erase all option in odin might help a bit.
5.If none of these works i guess you need to flash the device using Z3x box or jtag. Go ye visit a samsung service and hopefully they manage to fix your problem.
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
Send it to me if you are gonna throw it away
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
have you read this post https://forum.xda-developers.com/galaxy-j5/how-to/how-to-unbrick-galaxy-j5-sm-j500h-t3536287
100% it s something that you can do to fix it .. Just search hard i had problems like this on many phones ( not booting and things like that) and i fixed them after some google .. all i can say is Good Luck mate Ps:don t throw it..
EDIT
My bad didnt read your full post.
I was gonna mention Smart_Switch_PC_Setup
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
JayFivehundred said:
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
Click to expand...
Click to collapse
Send it to me