Related
Hi,
Due to an unfortunate accident, my nexus 6P's screen is not longer functional. The screen is blank and the touchscreen does not work anymore. I am able to get into fastboot mode and installed TWRP (previously had CWM) but I am unable to access recovery mode in order to backup my files into my computer. Is there any way around this? Thank you for the help. Holding power and volume up keys does not work and only bootloader mode works but since I can't see anything, I am unable to select the recovery mode option
faatehhamad said:
Hi,
Due to an unfortunate accident, my nexus 6P's screen is not longer functional. The screen is blank and the touchscreen does not work anymore. I am able to get into fastboot mode and installed TWRP (previously had CWM) but I am unable to access recovery mode in order to backup my files into my computer. Is there any way around this? Thank you for the help. Holding power and volume up keys does not work and only bootloader mode works but since I can't see anything, I am unable to select the recovery mode option
Click to expand...
Click to collapse
have you tried
Code:
fasboot reboot recovery
Reboot to bootloader, volume down button twice then power button. It will boot into TWRP. Good luck trying to your password if you're encrypted. You should be able to adb from there.
Sent from my Nexus 6P using Tapatalk
I had a similar issue with an S4, and the phone functioned, but without an active screen. I was able to boot it normally, and access the files on my phone when connected to my laptop. Have you tried that?
83097markcynt said:
have you tried
Code:
fasboot reboot recovery
Click to expand...
Click to collapse
I used the fastboot flash recovery recovery.img command and used the latest TWRP version for it. However, I don't remember if encryption or pattern lock was set on the recovery (does it matter though, if I reflash the recovery?). After the command, fastboot tells me that it has successfully booted into the recovery mode, and is evident from the fact that my device no longer lists in the fastboot devices command, and Nexus ADB interface appears on my computer's device manager window. Assuming that ADB is enabled in recovery mode, I try to connect my computer via ADB but no device is recognized. I can boot into my phone normally, but since I cannot see the screen, unlocking my phone is impossible and without that, I can't access my files, also ADB does not work on the lockscreen and it probably has to be enabled via developer options initially.
Is there any work around for this? Perhaps enabling ADB on the recovery using fastboot? Or disabling the pattern lock using a flashable .zip file that I can flash via Fastboot? I just want access to my phone as it has important data that needs to be recovered. Thank you for all the help!
dratsablive said:
I had a similar issue with an S4, and the phone functioned, but without an active screen. I was able to boot it normally, and access the files on my phone when connected to my laptop. Have you tried that?
Click to expand...
Click to collapse
Yes, I can boot into my phone. However, I cannot access files and my laptop does not detect it whilst on the lockscreen
faatehhamad said:
Yes, I can boot into my phone. However, I cannot access files and my laptop does not detect it whilst on the lockscreen
Click to expand...
Click to collapse
That's the rub, I probably didn't have a lock screen enabled.
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
inwarse said:
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
Click to expand...
Click to collapse
You downloaded the KENZO (this is not oneplus2! ) TWRP and flashed it on another phone (oneplus2), just normal that it doesn't work and your phone is messed up.
If you can enter fastboot (vol up and power button to boot) you can rescue your phone:
-enter fastboot (vol up + power, while phone is completely off, u can also hold it until you can see "fastboot" written on the screen)
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
If something is not clear, use google, because this is most likely basic stuff you have to know when flashing your phone
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
inwarse said:
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
Click to expand...
Click to collapse
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
wertus33333 said:
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
Click to expand...
Click to collapse
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Oh, the link is dead, sry for that. try this one (GDrive links are up and working).
inwarse said:
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Click to expand...
Click to collapse
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Do you still have TWRP? If yes go to TWRP and shut down the phone there, afterwards you should be able to enter qualcomm mode again.
otherwise you have to try (i think 10s power button will shut the device completely down). You should be able to enter qualcomm mode if the device is fully shut off (your scenario sounds as if the device is not fully shut off when u connect it to the pc).
Just to go sure: You are absolutely sure to have a oneplus2, are you?
inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Could you resolve the issue?
wertus33333 said:
Could you resolve the issue?
Click to expand...
Click to collapse
nope. kept running into issue after issue, so got dejected and gave up.
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
pieemme said:
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
Click to expand...
Click to collapse
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
DeathBell said:
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
Click to expand...
Click to collapse
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
pieemme said:
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
Click to expand...
Click to collapse
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
DeathBell said:
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
Click to expand...
Click to collapse
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
pieemme said:
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
Click to expand...
Click to collapse
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
DeathBell said:
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
Click to expand...
Click to collapse
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
pieemme said:
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
Click to expand...
Click to collapse
I still can't uderstand you. Can you boot into Android or not? And Does TWRP work? When you device is softbricked, what did you do to brick it?
At one point you say that you can access fastboot by choosing reboot to bootloader in TWRP and then you say that you have no working recovery at all.
Anyway I can't help you with the fastboot thing then and that file isn't Oreo it's an old version of Nougat, B360 and up is Oreo and also B321 witch is Oreo Beta. You can only flash image files in fastboot anyway as that file needs to be unpacked and put on the dload folder on your sd card.
When you want to get to Oreo you can either use service roms from this thread https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946, you need to copy the two zip files into the dload folder in your SD card. You can also use HWOTA but that wouldn't work since fastboot isn't working for whatever reason. Or when your custom recovery is working you can use HuRUpdater. But you need to be on the newest version of Nougat B210 or B209 to update as otherwise you may brick your phone.
Hey, I have an XT1563 with an SD card integrated into internal storage (which I'm regretting deeply now). Never unlocked bootloader.
Long story short, the screen fried and now won't turn on. Now I'm on a long journey trying to recover the data from it.
I'm also a noob at all of this, here's what I've done so far:
I have the Motorola drivers installed, and just the SDK platform-tools installed.
I can't remember if I kept USB debugging enabled or not, but I figured if I could get it into recovery mode I could enable it through that.
But I can't enter recovery mode. The only thing I'm successfully able to do is enter fastboot mode. I tried doing a flash recovery but of course since bootloader is locked it failed.
So from fastboot, since I can't see the screen, I can only guess at which buttons lead to recovery mode. From images, recovery mode is second on the list, right?
I've tried Vol Down + Vol Up. Didn't work. Also tried Vol Down + Pwr. Also didn't work. Fastboot still says it's in fastboot mode and adb doesn't recognise anything.
The only way my laptop is recognizing the phone is through fastboot. When I plug it in normally it doesn't connect (guessing it jumps into charging mode, but adb still doesn't recognise it)
Can somebody help me here? IIRC Moto X Play does have a built-in recovery mode, right? Is there a way to enter recovery mode through CMD/fastboot functions, or can anyone help me with the hardware buttons to reach it?
Bump
svxyl said:
Bump
Click to expand...
Click to collapse
I'm not sure what is possible. My idea would be:
1. Enter fastboot
2. Fastboot boot twrp
3. Use integrated adb of twrp to access data and shell as well as adb backup. Transfer data using data exchange for Android should also be possible.
Recently, I purchased a TicWatch Pro 2020 (saw that Kali Nethunter now seems to work on it and I thought it could be a cool device to add).
I have installed nethunter onto several other devices already (Nexus, OnePlus, etc.) and of course ran into issues. Usually I spend a long time on them and it is fun to do it. But I seem to have run into a wall recently with the watch.
When I was first trying to set up the watch, I could send commands with adb to get it into the bootloader menu but then it would not recognize it. I did eventually get the right drivers installed and had my VM recognize the watch with the ADB drivers.
I did manage to complete Step 1 of the tutorial https://www.kali.org/docs/nethunter...-on-the-ticwatch-pro/#1-unlock-the-bootloader
(unlocking it).
I went through to step 2, put it into bootloader again and flashed the vendor and twrp .img files. Once I did this, I tried to switch the device into recovery mode (after it went back to the bootloader menu on its own) as per instructions. But the weird thing is when I initialized recovery mode, it just sent me back to the bootloader menu, all while also not recognizing it on my VM/PC at all. When I tried to start the watch, it just sent the device into a permanent loading loop (after showing the logo and cycling the 4 different colored Google dots around the watch). I can get it back into the bootloader menu by holding both buttons down but I can't get my device to be recognized with a data connection (so it seems effectively bricked).
Normally I look this up myself but since there is not much information regarding this device and this specific rom out there just quite yet, I can't locate anything (compared to troubleshooting the OnePlus 7 Pro). Any ideas or input is appreciated!
Edit: will just let it run over night (drain battery to see if it may or may not help).
Thought I would leave a quick update in case you may be running into this issue yourself.
I let it run over night and run out of power to see if it would do anything. It now seems to be recognized by my pc, but it would not connect. I am installing everything through a VM but it appears that the PC could not recognize the device (I only had drivers installed on my VM, not my main device). When I installed the drivers on my main desktop it began to recognize it again on my VM. Not sure why this was an issue or how it became one or if it was a combination between everything but now at least I can send adb and fastboot commands to my watch again. Will try to flash a stock rom for it and try again to get out of the boot process (still confused as to why it will not go into recovery mode but it instead goes back into boot loader mode when I select it)...
Another update: I managed to find a stock image and some simple instructions. Credit to @sonnettie as it looks like it is working atm (going through setup).
Link: https://forum.xda-developers.com/t/ticwatch-pro-2020-stock-image.4107539/
Going through to try installing nethunter again if it appears to be fully functioning.
Edit: Using the stock image seems to let me now use my watch again. But whenever I try to install Nethunter, I install the vendor and recovery image. Once I do this and try to go into recovery mode, it just seems to bring me back to the boot loader menu. Anyone have solutions or know what is wrong?
i got nethunter and twrp working on the ticwatch 2020, it was a pain finding the right files to use and i soft bricked my watch many times in the process.
https://forum.xda-developers.com/t/...shark-4g-ticwatch-c2-skipjack-9aug20.3821013/ this post has the right vendor.img and twrp recovery image, in particular this mega folder https://mega.nz/folder/cVVBRaxL
1-Vendor-Images-22-Jun-2020.zip unzip this file it is located in TicWatch-Pro-2020(Catfish-ext)/Custom-ROM/ROM/22-Jun-2020 it contains the vendor.img you'll need
tic-watch-pro-2020-twrp.img in TicWatch-Pro-2020(Catfish-ext)/Custom-ROM/TWRP this is the TWRP Recovery.img you'll need
Magisk-v21.0.zip and nethunter-2022.2b-ticwatchpro-wearos-kalifs-nano.zip are both needed from the TicWatch_Pro_NetHunter_files.zip at https://build.nethunter.com/contributors/re4son/catfish/
1) Enable ADB and unlock bootloader then enter these fastboot commands on pc
fastboot flash vendor.img
fastboot format userdata
fastboot format cache
fastboot flash recovery tic-watch-pro-2020-twrp.img
2) Reboot into WearOS and Setup Watch
3) Enable ADB again and reboot into recovery
adb reboot recovery
4) move Magisk-v21.0.zip into the TWRP folder on the watch
install Magisk-v21.0.zip from TWRP recovery (it'll patch the boot.img itself)
5) Enable ADB Sideload from the Install menu in TWRP
adb sideload nethunter-2022.2b-ticwatchpro-wearos-kalifs-nano.zip
6) Reboot into wearOS with kali splash screen, you will have to open the magisk app after you open the nethunter app to give it root as there isn't a proper pop-up screen to give root access
**circle screen does semi cut off a few buttons in the nethunter and magisk apps, touch your watchface close to the "corner" where it is to select it
I hope this all helps! Cheers mate
unidentifieduser said:
Another update: I managed to find a stock image and some simple instructions. Credit to @sonnettie as it looks like it is working atm (going through setup).
Link: https://forum.xda-developers.com/t/ticwatch-pro-2020-stock-image.4107539/
Going through to try installing nethunter again if it appears to be fully functioning.
Edit: Using the stock image seems to let me now use my watch again. But whenever I try to install Nethunter, I install the vendor and recovery image. Once I do this and try to go into recovery mode, it just seems to bring me back to the boot loader menu. Anyone have solutions or know what is wrong?
Click to expand...
Click to collapse
i just realized i typed all the above and didn't reply to your message, it was a mixture of two install methods with leaving out the flashing of the rom file itself