Hey xda community I have been messing with my rooted and romed epic 4g I just attempted to flash the nexus s shutdown and startup boot animations. I know samsung has their own special format so the animations shouldn't work. I am confused because the shutdown animation does work but I can't get the boot animation to work. Can somebody explain why the shutdown works when the bootup doesn't?
Custom boot animations only work with a modified kernel. Samsung uses a proprietary file in stock ROM's for the animation. As far as I know, no one has access to the software to modify them. So as a work-a-round dev's started mod'ing the kernels to allow a series of .png files to be played at a specified frame rate to create custom animations.
The shut-down animation format is the same on stock and cooked ROM's and doesn't rely on a modified kernel to work. It is also comprised of a series of .png files, the same as a custom animation. There is, however no way to control the frame rate that it plays at, or to tell it to loop.
So, after all of that there, the straight up answer to your question is...if you're running a ROM that has a stock kernel then the custom boot ani won't work, but the shut-down will!
Oh, and by the way, you posted this in the wrong forum. It should be in "General".
thank you so much i was just confused and sorry about it being in the wrong forum. oops
Please post questions in General section.
I just did the 4.010 update and rebooted and so far (aside of netflix STILL not working) its pretty sweet. I was wondering If however anybody could rip the animation from the OEM recovery. I noticed it when I did a reboot how it had the android with the gears and thought it would make a far better boot animation... Any asist would be both welcome and appreciated.
aside form me not understanding your post at first. (i think i get it now) i think this belongs in themes and apps as that is where most of the boot animations are.
Love to see a shot of that bootanime.
gammaRascal said:
Love to see a shot of that bootanime.
Click to expand...
Click to collapse
you never see it ?
if you put the full 4.010.22 file as update and launch recovery you will get this nice animation
green lined android bot with gear moving inside him...
I wonder where are those animation.
like the one on the samsung galaxy triggering at the shutdown.
Ya, no I've never seen it.
If you find something on the web showing it, can you link me?
This is not a normal bootanimation. Seems the recovery does the work of actually animating the files.
Here are the images though.
http://www.4shared.com/file/MXpvwBqR/recoveryanimationimages.html
I can probably make a bootanime out of that. Thanks for the link.
Okay here is my take on that recovery animation:
http://forum.xda-developers.com/showthread.php?p=15540785
Hope it works for you.
CAUTION TO NOT LOOSE TWRP
I read two posts that say v21, now again on V8.5, put the stock recovery back instead of twrp. This is probably a side effect of a fresh stock /system and wipe of /data.
As a preventive step, when done flashing and wiping reboot to recovery FIRST, before booting the system It will allow recovery to handle removing the recovery-from-boot.p that flashes stock recovery.
I just patched the modified V7.4.2 up to the newly released 8.3 now 8.4. 8.5, 8.7,9.0 -V9.2 Patch
New update has been made from V17 to V21 of the non prime version of R1-HD, Non prime is behind on security patch (2017-05-05)
Copied ROM from phone and made twrp install ROM from it.
* No preloader change (official updates change the preloader to block your ability to use sp flash tools for rom flashing)
* No lk.bin change __ this part is what allows you to choose boot options(boot menu when power and volume pressed together)
* No "FOTA" app Fota has now been left in to make it easier to get next update, if that ever happens.
* No opera browser
* No adds (removed in the modified 7.4.2)
* Custom boot logo (only done on v8.3, there was no interest in this so abandoned)
--Newer versions of rom left stock, Leaving mods up to user.
** while it is not necessary to do a wipe with this ROM, I still recommend it.
**Thanks:
** @vampirefo needed his patched v7.4.2 in order to apply this new 8.3 patch and again for 8.4
** @ColtonDRG OR @jasonmerc I do not remember which one made it: For the image used in the custom logo
and the modified zip is here .
Roms are rootable with SuperSU, flashed in twrp after install. Must be done in systemless mode. In order to patch system veridy in boot.img
Logo update did not work on original rom changing link to updated version
BLU rolled v8.3 back to v7.4.2 because of app compatability issues. V8.4 is there fixed release. Both 8.3 and 8.4 are modified prime roms with ads stripped
V21 is the non prime update.
Unmodified V6.1
==>NON-ROOTED-logo-not-replaced-modified-V8.3
==>Fixed Logo modified NON_ROOTED V8.3
==>>modified V8.4
==>>modified V8.5
==>>Full with Ads V8.7
==>>Full with Ads V9.0
==>>Patch For V9.2 must be flashed on top of fresh V9.0
****Run debloat ==>script to remove ads if you need/ want to, or remove from zip before flashing ****
alt. manual example: before reboot, while still in twrp. Select mount and put checkmark next to system. Then run these two commands in adb terminal
Code:
adb shell rm /system/priv-app/com.amazon.*/com.amazon.*.apk
adb shell rm /system/app/Adups*/*.apk
==>>Modified V21
** stand alone logo installs
I flashed this but I didn't get the custom boot logo.
mendelgordon said:
I flashed this but I didn't get the custom boot logo.
Click to expand...
Click to collapse
I had that happen to my second phone too.
I don't have an explanation yet.
I even made a separate update.zip , that one didn't make the logo change either. I did eventually change it with sp flash tool.
I tried with both recoveries.
and multiple /dev location formats. and for whatever reason my one phone did not accept the logo change from recovery.
And the other test phone it worked.
mendelgordon said:
I flashed this but I didn't get the custom boot logo.
Click to expand...
Click to collapse
Neither did I but it all seems to be working fine
Been using this for about a day now, likewise no custom boot logo, but that's fine. Otherwise, it's been running super well. A lot better than the previous mostly stock version did for me with the bloatware APKs removed after the install. A lot of the general idiosyncrasies of the previous version of the stock rom seem to have gone away for me. It seemed to have weird storage management issues, errors moving to SD, broken symlinks that prevent apps from moving or being reinstalled, and a lot of other little non-storage issues, but so far, none off that here.
Long story short, good work! I hope we eventually see proper 7.x roms through some of the efforts going on, but in the meanwhile, your work here has made life a little bit better on 6.
It seems that I was able to get the logo.bin to update when I applied the original update patch, but not when I used the same line in the rom install.
It is no big deal that it did not work, I was just trying to make it look different at boot time.
edit:
I think i found the problem with the logo not updating.
i used the update-binary from the official patch update. (the one that allowed the logo to change the first time)
and it changes . so since the ROM seems to install the way it is , only the logo didn't flash I put it in a separate update.zip if anyone is interested in it.
EDIT 2:
clarification.
It was not so much the binary allowing the logo to change but the format of the partition location I had been using that needed that binary.
Further test had shown me that I could have used the binary I was using but just change the partition naming line
Code:
package_extract_file("logo.bin", "/dev/block/mmcblk0p9")
the above code works with the same update-binary as rom install
But I was using
Code:
package_extract_file("logo.bin", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/logo")
Taken straight from the official patch, and thats why it needed the update-binary also.
I dont know what is different in the binary other than , major size difference.
The powered by me logo was just a test file to see changes in the logo.
**logo-update is same as composite but with alt updater-binary
**composite-logo screenshot is in op
**stock logo will return to original BLU logo
mrmazak said:
It seems that I was able to get the logo.bin to update when I applied the original update patch, but not when I used the same line in the rom install.
It is no big deal that it did not work, I was just trying to make it look different at boot time.
edit:
I think i found the problem with the logo not updating.
i used the update-binary from the official patch update. (the one that allowed the logo to change the first time)
and it changes . so since the ROM seems to install the way it is , only the logo didn't flash I put it in a separate update.zip if anyone is interested in it.
EDIT 2:
clarification.
It was not so much the binary allowing the logo to change but the format of the partition location I had been using that needed that binary.
Further test had shown me that I could have used the binary I was using but just change the partition naming line
Code:
package_extract_file("logo.bin", "/dev/block/mmcblk0p9")
the above code works with the same update-binary as rom install
But I was using
Code:
package_extract_file("logo.bin", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/logo")
Taken straight from the official patch, and thats why it needed the update-binary also.
I dont know what is different in the binary other than , major size difference.
The powered by me logo was just a test file to see changes in the logo.
Click to expand...
Click to collapse
Hahaha the scribbled "ME" is hilarious. Your work is awesome, I don't think anyone using this rom will have an issue with the boot image but thanks for being so helpful and explaining.
P. S. Do you have any plans with the Nougat update?
Serenitybs said:
Hahaha the scribbled "ME" is hilarious. Your work is awesome, I don't think anyone using this rom will have an issue with the boot image but thanks for being so helpful and explaining.
P. S. Do you have any plans with the Nougat update?
Click to expand...
Click to collapse
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
linuxsociety said:
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
Click to expand...
Click to collapse
Somebody already tried this out
linuxsociety said:
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
Click to expand...
Click to collapse
It was just wishful thinking. I have no idea how all of this is done. All I know is @mrmazak has helped me to fall in love with my phone again with this V8.3. The 7.4.2 did seem a bit buggy for my phone but this update works beautifully and I didn't even root it. If this remains true I will be happy with this phone for awhile even on 6.0
Really confused right now.
I was browsing through the settings menus. And found in the Settings-security- menu a toggle labeled "quick boot" ( not to be confused with "fastboot") . I enabled it then rebooted to see if it booted quicker. Didn't seem to make much if any difference. So I went back to turn it back off. And it wasn't there. I checked in my other phone , it wasn't there on that one either.
Did any body see this menu item, and if so where is is it?
Edit 1:
Few more power off , power on cycles to compare times. With other phone and defiantly seems to have turned on some faster boot option.
This phone goes from off to on in 5-6 seconds other phone takes about 20.
Edit 2:
OK , I panicked for a minute.
Couldn't find the setting and thought that it was another way to block sp flash tool by preventing you from ever being fully powered off.
But the setting was in accessibility not security.
Mrmazak, first of all, thanks for the ROM, installed it yesterday. But I have a problem with SELinuxModeChanger app. First, I'm getting a security warning when installing it, then - when running it. And another message, with this app running - "can't obtain root", although SuperSU shows its status with green #, like every other app it gives root privileges to. On my other Prime phone, running 6.1 out of the box stock ROM, FM radio works just fine with SELinuxModeChanger app behaving flawlessly (no security warnings whatsoever). Any ideas?
detroitredwings said:
Mrmazak, first of all, thanks for the ROM, installed it yesterday. But I have a problem with SELinuxModeChanger app. First, I'm getting a security warning when installing it, then - when running it. And another message, with this app running - "can't obtain root", although SuperSU shows its status with green #, like every other app it gives root privileges to. On my other Prime phone, running 6.1 out of the box stock ROM, FM radio works just fine with SELinuxModeChanger app behaving flawlessly (no security warnings whatsoever). Any ideas?
Click to expand...
Click to collapse
The mode changer app is technically a security issue. I did have that warning a few times when using mode changer app from the XDA thread of the developer, then when I used the app downloaded from f-droid it worked with systemless root and didn't give the security warning.
The app downloaded from f-droid worked for me as well, many thanks!
Big thanks for getting this out, updated from previous debloated, rooted version to this modified 8.3 stock rom, rooted with SU v2.79 SR3, all is good - only App that won't show up nor install, even tried the ones off APK Mirror site - is my Dunkin Donuts App, LOL. Play Store now said it's not compatible and the APK started to install then failed - any ideas or suggestions on what to do ??
Otherwise, it's all good - I will survive without DD App, just run that from another device when I need my caffeine fix.
Letitride said:
Big thanks for getting this out, updated from previous debloated, rooted version to this modified 8.3 stock rom, rooted with SU v2.79 SR3, all is good - only App that won't show up nor install, even tried the ones off APK Mirror site - is my Dunkin Donuts App, LOL. Play Store now said it's not compatible and the APK started to install then failed - any ideas or suggestions on what to do ??
Otherwise, it's all good - I will survive without DD App, just run that from another device when I need my caffeine fix.
Click to expand...
Click to collapse
I also had an app that previously work, say is not compatible now.
Maybe has to do with apps that have links to pay accounts. And that has something to do with trustzone. (Tee1 & tee2)
Those sections I left out of the update. I will add it back in and test. Update when I do. It is also possible this problem is why Blu rolled back there update.
**EDIT**
well that didn't go well at all.
I flashed the new trustzone.bin files from the official update. Now phone no longer turns on and no longer connects to flash tool
**EDIT 2**
After much persistence and many failed attempts to get phone recognized in pc again. Finnaly got to a point that phone was cycling between "preloader" driver and "usb serial device", and with careful timing was able to start sp flash tool at just right time and the flashing back to original trustzone files seems to have recovered phone.
for the record i am not sure what steps made it work. But I was shifting back and forth between leaving phone sit on charge, then on charge with rubber band wrapped around power button, then not plugged in , and not plugged in with rubber band on power button.
Okay... persistence is key in customization, i guess! I am getting somewhere here!
mrmazak said:
The first link is needed to get phone unlocked so you can install twrp.
Click to expand...
Click to collapse
Finally got thru the steps in order (1-2-3-4) then Step (5) and sub-step 1. I can also boot to TWRP.
Now this brings me to this thread, 8.3 Stock ROM. The thread assumes one knows how to install it and I suspect this could be as easy as uploading it to a folder in the phone then booting to TWRP and INSTALLING the ZIP file? Could someone clarify the steps to install this 8.3 ROM?
Thanks!
OldSkewler said:
Okay... persistence is key in customization, i guess! I am getting somewhere here!
Finally got thru the steps in order (1-2-3-4) then Step (5) and sub-step 1. I can also boot to TWRP.
Now this brings me to this thread, 8.3 Stock ROM. The thread assumes one knows how to install it and I suspect this could be as easy as uploading it to a folder in the phone then booting to TWRP and INSTALLING the ZIP file? Could someone clarify the steps to install this 8.3 ROM?
Thanks!
Click to expand...
Click to collapse
Yes. You are correct
Either put the zip file on external sd card , put card into phone boot into recovery mode and install , or put file directly onto phone .
Many ways to do that.
Easiest is to copy to phone while phone is connected to PC.
Cam also download file from internet with your phone.
Bottom line is get zip file to the phone boot to recovery and install
Anyone else having wifi issues after upgrading? While watching videos it seems the internet cuts out. The phone says it's still connected but I have to turn wifi off and back on for anything to work. Could be my router also but it didn't seem to be doing this until I installed 8.3
mrmazak said:
Yes. You are correct
Either put the zip file on external sd card , put card into phone boot into recovery mode and install , or put file directly onto phone .
Easiest is to copy to phone while phone is connected to PC.
Bottom line is get zip file to the phone boot to recovery and install
Click to expand...
Click to collapse
Right on man! I am officially running 8.3 ROM with April 5th 2017 Security Patch Level! Geez.. it was not easy but I got this working!
MrMazak, I followed all your instructions on both links, so could you tell me what exactly I have on my phone? Is it rooted? Bootloader Unlocked? The phone seems to be working fine but I don't know what level of access I have. Honestly I don't even know exactly what the differences between all these terms are.
Also, do I have or not SU? One of the steps under the .bat I believe install it. How do I access it?
Thanks again!
---------- Post added at 10:19 PM ---------- Previous post was at 10:18 PM ----------
Weasel0 said:
Anyone else having wifi issues after upgrading? While watching videos it seems the internet cuts out. The phone says it's still connected but I have to turn wifi off and back on for anything to work. Could be my router also but it didn't seem to be doing this until I installed 8.3
Click to expand...
Click to collapse
My install is pretty fresh, couple of hours, but as far as I can tell all is working fine with Wifi, As a matter of fact this is a new device only connected with Wifi and no SIM Card.... internet works fine.