I have a Seicane I just purchased, and has android 10. I have changed the settings to English. The head unit is English. Works fine.
However, in my 2011 Chevy Cruze LT, the digital display above the steering column that shows how fast you are going, and TPMS settings, etc… You can control these settings using the buttons on the turn signal lever.
Here is the issue. The car display has changed to Chinese. And it’s impossible to change the language back to English because some options are blank, and others are Chinese which I can’t read.
I’ve unplugged the head unit, and plugged back in, and it goes back to English. But I noticed again it’s changed to Chinese again.
The Can Bus settings in Seicane is set by Seicane to GM and looks be the correct one.
Any ideas?
Related
Hi ive recently bought a android PX3 head unit, installed it ok but it has changed my milage into KM as im in the UK i need the speedo in MPH, there is a app installed called control settings, in this there is a milage setting set to < KM > but it wont change, most of the settings in the control settings app like temp set to C wont change to F either, indicators set to one flash etc the only setting that i can change is CD indicator.
would anyone know if this could be a software bug with the MCU or the android version?
where would i look for a update? i dont even know who the manifacturer is.
The head unit has no physical buttons only a reset hole so can anyone please tell me how i would get to the recovery screen?
ive never had a android head unit before so dont know much about these units.
Can anyone please help me change/fix this setting or another app or update i can install that can change the milage back from KM to miles,
model px3
android 7.1.2
kernel 3.0.101+
mcu MTCE_KSP2_V2.70a_1
thanks for any help
regards
aliexpress.com/item/Android-7-1-7-Car-DVD-player-GPS-Navigation-Stereo-Audio-Radio-DVD-for-Ford-Fiesta/32839001963.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_5000015_10151_10344_10068_10130_10324_10342_10547_10325_10343_51102_10340_10341_10548_5130015_10192_10190_10084_10083_10307_10301_10303_10312_10059_10313_10314_10184_10534_5790011_100031_10604_10103_10605_10594_5060015_10142,searchweb201603_36,ppcSwitch_5&algo_expid=239a9acb-5370-48d4-8bfa-8a9d42e57358-35&algo_pvid=239a9acb-5370-48d4-8bfa-8a9d42e57358&transAbTest=ae803_5&rmStoreLevelAB=5
https://www.ebay.co.uk/itm/CTSFO004...sh=item4413f7f882:g:bXAAAOSwhChZrEtd#shpCntId
would this work with the HU, just connect upthe 3 wires? and not connect the HU plug connector that goes to my info screen?
regards
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
did you ever get your problem sorted as I now have the same problem
Hi no the seller didnt want to know and just fobbed me off for months before blanking me on whatsapp, no firmware updat as promised, nothing, so what i did was got a set of these:T - 3 Car Intelligent Steering Wheel GPS, hang up/answer, volume setting, music Controller with Noctilucent Function buttons https://www.aliexpress.com/item/Zee...191.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J whicc work quite well, ive also recently ordered a button stalk like how the older radion buttons were: Car steering wheel button remote control lights car navigation DVD / 2 din android Bluetooth wireless Universal remote control,
https://www.aliexpress.com/item/Car...596.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J but im still awaiting delivery of it.
ill be very happy with the stalk as well as the buttons ive stuck to the centre consol, no where near as cool as the steering wheel controls but i really needed my speedo in MPH
anyways hope this helps somewhat not perfect but better than the speedo flashing between KM/MPH
regards
shadowfoxmi said:
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
Click to expand...
Click to collapse
I know this is old but I have the same issue with my Joying head unit and my BMW e90. On start up, I have to go into my settings and set everything to American/Imperial units. Did you ever find a fix to this? It's driving me nuts.
Hey guys,
I recently bought a Headunit for my Opel/Vauxhall/GM Vectra C by the brand Autotop on AliExpress.
More information here : https://www.aliexpress.com/item/33064243426.html?spm=a2g0s.9042311.0.0.4d374c4djb2lMm
It is a RK3368 unit with 4gb RAM and 64gb ROM and Carplay function. I mainly bought this unit because I expected two main features from it.
Firstly I wanted to be able to have plug and play Android Auto and the unit came with a dedicated usb cable that had the label carplay on it which only fit in one slot on the back of the radio. Sadly when I plugged my phone in nothing happened so I assume that the unit is in fact not Android Auto ready even though the description says so. Am I doing something wrong/ Do I have to set up Android Auto in some way, first?
I also want to install a backup camera and I saw in some other youtube videos that the PX5 Android 9 and Android 10 devices have something called "Extra Settings" where different parameters of the backup camera can be adjusted. One of the things that can be adjusted is the calculation of the reverse trajectory of the car which is a feature that I would really like to have.
Unfortunately my headunit only has "General Settings" "Factory Settings" and "Steering Wheel" settings. And none of these settings contain any adjustments for the backup camera.
Is there a way to "unlock" these extra settings or are they just not present in my Android Build ?
Ive attached my Build Number for further information down below
Thanks in advance for your help!
Yesterday i also got my PX5 4GB/64GB for my Vauxhall Insignia / Buick Regal 2016.
1. I am also missing the "extra settings". There are some options that might solve my other problem with my...
2. Steering wheel Buttons not working. They are working but not in the android Unit, just in my Board Computer
3. The Board Computer doenst seem to communicate with my new Android Radio ...
It was also said Plug and play and in the Describtion they had an image of exactly the same original Radio that i have/had...
I am so dissapointed but i think there is a wrong Setting in the Factory Settings (code 126) - here a Video of my Settings:
and this is waht i see, when i try to programm the steerin wheel buttons (attachement)
I think it comes all togehter on either the missing "Extra Settings" or in a wrong setting in the Factory Settings :-(
I have the same problem with steering wheel buttons. I got a PX5 4GB/64GB Erisin
Carplay dont work at moment, I am thinking to update de firmware...
https://www.aliexpress.com/item/1005001834561873.html
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
Now they work but i still can not programm each button to another function. Still grey screen.
I
DaGamma said:
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
View attachment 5216727
Now they work but i still can not programm each button to another function. Still grey screen.
Click to expand...
Click to collapse
I can to program each button in Factory settings --- key --- canbus key setting, they work for me
Can you change the language of the car? After installing the language changed to english from the tachometre. In the car app there is no setting to change language.
I dont mean the android language,
Hi,
I have a Android / CIC head unit - Chinese one by the looks of it.
I clicked on change user in the android settings of the head unit and then it powered off and now it just shows no signal. I can still access the BMW CIC.
When the car initially starts it shows an android notification/settings bar but then straight away flashes up no signal. I feel like if we can change the user back to the owner, or delete the new user it should start working again.
MCU version is 045247bXHCN-CIC-HW7-190706[B1280_180325]
Hello,
I have an chinese aliexpress head unit designed for bmw, after the logo is stuck with no signal. Any idea what we can do? Thank you
Hi team. sorry for my English. After installing a new multimedia system in my car (opel astra j), i cannot change the language from Chinese to English on the mileage display. The new multimedia system is running in english language on android 10. what can i do about it? Thank you very much
Mine has happened the same thing today has anybody got a solution
Same problem. Hmm maybe set org. radio in and se if it helps. I have tried to go in the factory settings and se if the is any place to change it. No we're to finde it..
Maybe possible to change in can factory settings. Similar as shown here:
Junsun V1 PRO 4GB + 64GB can't set speed in KPH instead of MPH
Hi to everyone. I installed this unit some mounts ago on my Jeep Renegade MY17 with a lot of small issues. Now most of them are solved, but I'm still missing the possibility to set the speed unit of the car display in KPH instead of MPH The...
forum.xda-developers.com
Hmm the only way is install the org. Radio. I just took the radio power cord and put on ignition. Start the car and turn off. Language is back.
Here you can find how to change for another head unit:
In-car display changed to Chinese - Android-Headunits.com
The in-car display is now in Chinese. It is known to happen to Vauxhall models, change to the language setting of the car display.
android-headunits.com
There should be an additional setting besides the settings you used to setup your can box.
Athanasiospianist said:
Hi team. sorry for my English. After installing a new multimedia system in my car (opel astra j), i cannot change the language from Chinese to English on the mileage display. The new multimedia system is running in english language on android 10. what can i do about it? Thank you very much
Click to expand...
Click to collapse
This site has easy to follow instruction to get it back to English. I have tried for months and after finding this site took me 5 minutes to change
In-car display changed to Chinese - Android-Headunits.com
The in-car display is now in Chinese. It is known to happen to Vauxhall models, change to the language setting of the car display.
android-headunits.com
Hello everyone. It is a BMW X5 E70 2008, ccc. I bought HU on Aliexpress (the version is in the picture). After installation, the OEM BMW menu does not work (no signal), the usb does not show and the electronic steering wheel adjustment does not work. All cables well connected, checked several times. Can someone help me enable these functions? Thanks in advance
Hi , did you get CANBUS box with this unit?
Canbus is used to connect multimedia device with car functions and car ECU.
If you have one installed probably wrong settings are set for car. You can change it in factory settings menu (hidden menu with PIN code access).
And consult with your seller about bought head unit rather than writing problems here on forum.
As for system update, you can ask seller for update or find on this forum or net, by search term "ZLH_BMH" - that's your version of software for unit.
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
serbia4ever said:
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
Click to expand...
Click to collapse
I would try to change canbus box with other one, another model like HIworld or Simplesoft, obviously there is no communication between ecu of car and head unit or cables behind unit for keys / steering wheel are misconnected or misswired. Check for wiring diagram for this device, find it one net somewhere.