Hi, i just got the car a few days ago and it had an android unit installed.
It was all working fine but since yesterday it got stuck on the android logo.
I tried the reset button, press once, hold 3 sec,5sec,10sec. Nothing.
I have no info about the head unit at all. Can anyone help me identify it and possibly fix it ?
Thanks !
What does seller suggest when contacted for support. What has been tried
As i said, i bought the car a few days ago with the radio installed. So i don't know what model it is or who is the manufacturer...
emirking99 said:
As i said, i bought the car a few days ago with the radio installed. So i don't know what model it is or who is the manufacturer...
Click to expand...
Click to collapse
Try to press the power button until the buttons flash. Release the power button short and press it again. Maybe it needs some timing tests for the second button press.
Edit: and please show me a picture from the back side.
rigattoni said:
Try to press the power button until the buttons flash. Release the power button short and press it again. Maybe it needs some timing tests for the second button press.
Edit: and please show me a picture from the back side.
Click to expand...
Click to collapse
Okay, so this is one of the unknown units from some unknown seller.
You need to get into the system.
Try to reset it as I wrote and then you need to go to Settings --> About tablet (or similar) and post a picture of the MCU and firmware.
rigattoni said:
Okay, so this is one of the unknown units from some unknown seller.
You need to get into the system.
Try to reset it as I wrote and then you need to go to Settings --> About tablet (or similar) and post a picture of the MCU and firmwar can't get into the system,
Click to expand...
Click to collapse
rigattoni said:
Okay, so this is one of the unknown units from some unknown seller.
You need to get into the system.
Try to reset it as I wrote and then you need to go to Settings --> About tablet (or similar) and post a picture of the MCU and firmware.
Click to expand...
Click to collapse
I can't get to the system, it just boots up and gets stuck at the android logo. Tried reset but doesn't work, only thing that is different is when holding power button, tap reset and press power button again it says update start and right away update end.
emirking99 said:
I can't get to the system, it just boots up and gets stuck at the android logo. Tried reset but doesn't work, only thing that is different is when holding power button, tap reset and press power button again it says update start and right away update end.
Click to expand...
Click to collapse
Have you not been able to get the buttons flashing?
rigattoni said:
Have you not been able to get the buttons flashing?
Click to expand...
Click to collapse
No response, they just light up when the unit is on and only shine red.
emirking99 said:
No response, they just light up when the unit is on and only shine red.
Click to expand...
Click to collapse
In this case I am not able to help.
As long as we don´t get more details of the system used on this unit, it could be everything and each system is different in getting back to life.
rigattoni said:
In this case I am not able to help.
As long as we don´t get more details of the system used on this unit, it could be everything and each system is different in getting back to life.
Click to expand...
Click to collapse
This one might be another case of hammerfor.
emirking99 said:
As i said, i bought the car a few days ago with the radio installed. So i don't know what model it is or who is the manufacturer...
Click to expand...
Click to collapse
Send it back, warranty claim. Cant complain about return freight, as its a unfortunate situation in that we get what we pay for.
At least you now get a chance to read the forums and find out what is worth buying.
Related
recently bought a unit android 5.1 unbranded in 7-inch aliexpress and I have a problem when I click the icon speed the radio resets and is stuck in the car manufacturer's logo and not give out, then i take the battery off to re-boot, someone able to help me, I ask if I can give any tips since the seller did not give a concrete answer than it might be, just sending a file to up date..someone to give a tip ?? thanks a lot
Recovery mode
niltoncesar said:
recently bought a unit android 5.1 unbranded in 7-inch aliexpress and I have a problem when I click the icon speed the radio resets and is stuck in the car manufacturer's logo and not give out, then i take the battery off to re-boot, someone able to help me, I ask if I can give any tips since the seller did not give a concrete answer than it might be, just sending a file to up date..someone to give a tip ?? thanks a lot
Click to expand...
Click to collapse
Hi...please connect the HU and press and hold reset button during 16sec........release and press reset again shortly.....after a few seconds the unit load in recovery mode...select the last option using a reset button shorty...to select the option press and hold the reset button.......release when process begin..regards
Eonon has a new Android 6.0 unit posted:
http://www.eonon.com/Android-Car-GPS/2-Din-GPS-Navigation/GA2162.html
However it is only 1GB of RAM, so I'll skip it, looks good though
I got this unit installed yesterday. I like it and it seems very responsive. When I was digging through the menus to change the boot logo. I selected model change, "Toyota Camry" The unit loaded new settings and rebooted. Now my physical buttons don't work and there is a software eject button. I guess what I selected is to change the software to match different radio designs. Any ideas on how to undo this? I've selected just about every option on this list plus done a couple of hard resets.
natescriven said:
I got this unit installed yesterday. I like it and it seems very responsive. When I was digging through the menus to change the boot logo. I selected model change, "Toyota Camry" The unit loaded new settings and rebooted. Now my physical buttons don't work and there is a software eject button. I guess what I selected is to change the software to match different radio designs. Any ideas on how to undo this? I've selected just about every option on this list plus done a couple of hard resets.
Click to expand...
Click to collapse
Did you manage to fix the buttons?
velvetpig said:
Did you manage to fix the buttons?
Click to expand...
Click to collapse
No, Eonon sent 4 files for me to put on a microsd card and then select software update from the menu. I don't think it really reset anything because it still booted up with the Toyota logo I had selected earlier. So, it would show the Toyota logo, go off and then the logo reappears and then it went to the Maintenance menu. There was no way to move the cursor. If I reset the unit or powered it off by holding the volume knob in, it would just go back to that screen. I could also hold down the power button, then hit reset to go to a screen that says "applying update", but it always just ended up on the same maintenance screen.
Anyways...they provided postage for me to send it back. They should be receiving it today.
natescriven said:
No, Eonon sent 4 files for me to put on a microsd card and then select software update from the menu. I don't think it really reset anything because it still booted up with the Toyota logo I had selected earlier. So, it would show the Toyota logo, go off and then the logo reappears and then it went to the Maintenance menu. There was no way to move the cursor. If I reset the unit or powered it off by holding the volume knob in, it would just go back to that screen. I could also hold down the power button, then hit reset to go to a screen that says "applying update", but it always just ended up on the same maintenance screen.
Anyways...they provided postage for me to send it back. They should be receiving it today.
Click to expand...
Click to collapse
Thanks for the reply,
I have done the same to my radio, I am exchanging emails with Eonon to try and fix.
Cheers
velvetpig said:
Thanks for the reply,
I have done the same to my radio, I am exchanging emails with Eonon to try and fix.
Cheers
Click to expand...
Click to collapse
I wonder if a USB Keyboard would enable moving the cursor and making a selection...I didn't try it because I don't have one
So I got my new radio from Eonon. This one is working better. I'm able to use the screen mirroring whereas before I couldn't connect. The option to switch models in extra settings is now blank. I really like the resolution of the screen and the 16gb of built-in storage. The only issue I've had is Poweramp will sometimes quit playing music while I navigate with iGo. It seems to be overly aggressive in killing background apps.
has anyone who purchased and hooked up to steering wheel controls able to program the speech/mic button to run "ok google"? another thing...are you guys able to run netflix? i can hear and see normally, until i play a show, then i only have audio...the image doesnt show
natescriven said:
I wonder if a USB Keyboard would enable moving the cursor and making a selection...I didn't try it because I don't have one
Click to expand...
Click to collapse
I got an Eonon GA2155 no physical buttons..... anyhow I was able to get to the recovery and reset the unit:
Power off the radio, connect an USB keyboard and power back on; got to recovery and use the "arrows" of the keyboard to select the item that you want; once selected press "enter" on the keyboard
kpitao said:
I got an Eonon GA2155 no physical buttons..... anyhow I was able to get to the recovery and reset the unit:
Power off the radio, connect an USB keyboard and power back on; got to recovery and use the "arrows" of the keyboard to select the item that you want; once selected press "enter" on the keyboard
Click to expand...
Click to collapse
Just curious how you got to recovery mode. I'm in a boot loop on my GA2155 and can not figure out for the life of me how to get into recovery with only a reset button. I have a usb KB hooked up but I never get an OS to boot so I'm trying to get to recovery mode right from power up *somehow*
Recovery mode for Eonon ga2162
I'm trying to enter in recovery mode, does anyone here knows the buttons combination to enter in that meme and make a wipe and factory reset?
Larugama said:
I'm trying to enter in recovery mode, does anyone here knows the buttons combination to enter in that meme and make a wipe and factory reset?
Click to expand...
Click to collapse
Try with usb-keyboard press "Alt+PrtScr+i"
Same issue
Larugama said:
I'm trying to enter in recovery mode, does anyone here knows the buttons combination to enter in that meme and make a wipe and factory reset?
Click to expand...
Click to collapse
Did do you find how to do it?
Zitual said:
Did do you find how to do it?
Click to expand...
Click to collapse
Read this thread
https://forum.xda-developers.com/an.../allwinner-r16-astard7-android-6-0-1-t3523906
*UPDATE* Was able to find former employee who got me the files I needed.
We purchased a Ford Explorer with a RoadNav s160 M254. I am trying to get the firmware update, but Roadnav.com appears to be down. Are they out of business? Would anyone happen to have the last firmware update for this? Thanks!
jasondaniels said:
*UPDATE* Was able to find former employee who got me the files I needed.
We purchased a Ford Explorer with a RoadNav s160 M254. I am trying to get the firmware update, but Roadnav.com appears to be down. Are they out of business? Would anyone happen to have the last firmware update for this? Thanks!
Click to expand...
Click to collapse
Hello. Can you show me how to contact that employee? My S160 now stuck in bootloop
big.brother said:
Hello. Can you show me how to contact that employee? My S160 now stuck in bootloop
Click to expand...
Click to collapse
Turns out that they weren't an employee, just an enthusiast. Leigh in Austrailia, [email protected].
jasondaniels said:
Turns out that they weren't an employee, just an enthusiast. Leigh in Austrailia, [email protected].
Click to expand...
Click to collapse
Also, I was able to resolve the bootloop by completely killing the power connection and resetting the unit. Good luck.
jasondaniels said:
Turns out that they weren't an employee, just an enthusiast. Leigh in Austrailia, [email protected].
Click to expand...
Click to collapse
thanks you so much.
jasondaniels said:
Also, I was able to resolve the bootloop by completely killing the power connection and resetting the unit. Good luck.
Click to expand...
Click to collapse
Did your unit have a reset button somewhere, cant seem to find it on my unit..
Bal.Pen said:
Did your unit have a reset button somewhere, cant seem to find it on my unit..
Click to expand...
Click to collapse
No, there is no reset button. I disconnected the power connection and waited 10 min before reconnecting while holding the SRC Button and that reset the unit. I followed these instructions.
How to upgrade your firmware?
1 Download the RoadNav Android S160 firmware for your model here
2 Extract and Copy the files into the SD card and insert the SD card into the GPS Slot (it must be this slot)
3 Power OFF your radio (turn car key to OFF position)
4 Wait about 5-10 minutes for SRC light to go OFF
5 Hold the SRC button and turn car key to ON position. You should hear a beep, keep holding than it beep twice, then loose the source button.
6 Upgrade will start automatically.
7 After about 5 minutes a message at the bottom says Installation complete. BUT, that's not the end of the upgrade.
8 The radio screen goes black and beeps for 1 minute (this is normal, don't touch it !!)
9 After some more updates the "installation is complete please remove card"
10 Remove the SDcard and the radio automatically reboots.
Can be found here:
app.bettermobileapp DOT com/article/10209493/S160+-+Android+4.4.4+Head+Unit
Good luck. These units are a pain.
Hey all,
So i have this android 8 Secaine head unit in my truck. Yesterday it booted and failed. It shows try again and factory reset as options. But none of the touch buttons will move the selection. I plugged in a mouse and can scroll up and down but it will not activate either selection. It was working fine the other day. When i press the reset button it will reboot show the navigation software logo then go to the screen i have attached a photo of in this thread.
Any Ideas ? Is this a hardware failure ? Can i use a jump drive to re-flash the mcu ?
Thanks.
Well, there are 2 points visible...
Try again
Factory data reset
Seems you need to try the second one in this case.
It is written in the yellow colored part how to switch and choose.
Yes i saw that but nothing you touch on the head unit will move the selection or allow you to enable it. The touch function on the radio is gone. I can how ever move up and down the 2 options by plugging in my mouse, but clicking on one of the options does nothing.
jaystundra said:
Yes i saw that but nothing you touch on the head unit will move the selection or allow you to enable it. The touch function on the radio is gone. I can how ever move up and down the 2 options by plugging in my mouse, but clicking on one of the options does nothing.
Click to expand...
Click to collapse
If you don´t have physical buttons, take some USB-keyboard and use the arrow keys and the enter key.
Going to try that this weekend and cross my fingers. I have a few MCU's that are specific to this model i can try to flash if i can get it to factory reset. Just hoping the hard drive hasnt failed or the Rom is ok. It has been hot here this week.
jaystundra said:
Going to try that this weekend and cross my fingers. I have a few MCU's that are specific to this model i can try to flash if i can get it to factory reset. Just hoping the hard drive hasnt failed or the Rom is ok. It has been hot here this week.
Click to expand...
Click to collapse
Just get it out of the car and on your desk, connected to a 12V power supply.
That is nothing which should be done in the car, at least not if it is hot or stone cold.
Hello, got a Chinese head unit, stuck in the android loading screen.
I have googled and tried every damn button combo to get it to recovery mode, read loads of threads in here ect.
My head unit only has power and reset buttons.
Anyway.
I have got a usb keyboard. I would like to know what buttons ect do I need to know to get it in recovery mode? I googled it but everything throws up 'how to display keyboard' or 'how to connect keyboard '
Not what buttons to press!
Also, is there any reccomended android ROMs to install instead? The one on it was always a bit meh.
Madmikefalkirk said:
Hello, got a Chinese head unit, stuck in the android loading screen.
I have googled and tried every damn button combo to get it to recovery mode, read loads of threads in here ect.
My head unit only has power and reset buttons.
Anyway.
I have got a usb keyboard. I would like to know what buttons ect do I need to know to get it in recovery mode? I googled it but everything throws up 'how to display keyboard' or 'how to connect keyboard '
Not what buttons to press!
Also, is there any reccomended android ROMs to install instead? The one on it was always a bit meh.
Click to expand...
Click to collapse
That is a difficult story, as we don´t have further information as 2GB RAM. That does not help in any way to help you out of this drama.
I would ask the seller for sending the needed files to recover your unit. No one else is able to help here... if there is no one with the same unit who can give some more information.
Issue... The seller is no longer available,
Madmikefalkirk said:
Issue... The seller is no longer available,
Click to expand...
Click to collapse
outch... That is terrible.
Do you have for luck some pictures of the "About tablet" pages? Otherwise there is no help possible. We need to know the MCU and Android version of this unit... but first of all the current used MCU.