Related
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
clementinox said:
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
Click to expand...
Click to collapse
I had the same issue on b20, but couldn't figure out what was causing it. Do you have gravitybox? Maybe some part of it is affecting how quickly the phone wakes up?
clementinox said:
[...] Stock + root + xposed (without modules yet) [...]
Click to expand...
Click to collapse
xxBrun0xx said:
[...] Do you have gravitybox? [...]
Click to expand...
Click to collapse
I guess not.
Loader009 said:
I guess not.
Click to expand...
Click to collapse
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
xxBrun0xx said:
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
Click to expand...
Click to collapse
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
clementinox said:
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
Click to expand...
Click to collapse
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Sorry this is off topic, but what kind of tweaks do you guys use Gravity Box for in regards to this phone?
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply guys!
I think I might have figured the root cause of the issue. I installed my modules one by one and realized that uninstalling xprivacy module fixed the issue. It's unfortunate since it was one of my favourite modules
my modules for whoever is interested:
-Audio Stream Music Default - pressing volume keys anytime changes media volume instead of ringtone volume
-xposed additions - cutomize volume keys with multiple taps, long presses for multiple use on lockscreen, screen on/off (i use it for long press volume up or down to switch tracks)
-xprivacy - to control what permissions apps use (but doesnt seem to work with MiFavor so i disabled it)
I had this problem while I was on b20, it went back to normal after I went and updated to b27 via @DrakenFX 's method.. When I came back up with b27, root, xposed, bl unlock, haven't had the slow fingerprint problem If it helps anyone else..
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Click to expand...
Click to collapse
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Odeen_c said:
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Click to expand...
Click to collapse
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
`SBR` said:
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
Click to expand...
Click to collapse
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Odeen_c said:
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Click to expand...
Click to collapse
App info> permission for gravity box... By default it should ask when you open gravity box
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
App info> permission for gravity box... By default it should ask when you open gravity box
Click to expand...
Click to collapse
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Odeen_c said:
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Click to expand...
Click to collapse
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
`SBR` said:
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
Click to expand...
Click to collapse
Here it is
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Looks strange... Not sure what is creating the issue...
Here is mine
Sent from my ZTE A2017U using Tapatalk
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Can you check if the module is activated under the modules tab in the xposed app
clementinox said:
Can you check if the module is activated under the modules tab in the xposed app
Click to expand...
Click to collapse
Currently it's not activated.
But 2 days ago, when I installed it firstly, after reboot I couldn't use the phone: it couldn't even get to the pin screen. It was continously doing a screen on and off.
I had to uninstall gravitybox via adb from my pc.
But it has to work (it says you have to activate it) even if it's not activated. At least, on my other device (Moto x style) it does.
Xposed was released for Oreo! Been so long don't know where to start.
EDIT: (I was just being dumb)
Grab the systemless version. Easiest way is through Magisk. Just make sure your on 15.2 or grab it via the link below.
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Enjoy
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
TENN3R said:
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Click to expand...
Click to collapse
I feel dumb but I don't see xposed anywhere in the modules section of the Magisk Manager app.
Is there some other way I should be finding modules? I click on the hamburger menu and then downloads and there's about 30 or so listed.
---------- Post added at 07:34 PM ---------- Previous post was at 06:48 PM ----------
Never mind. I figured out I had to be on Magisk 15.2. I was on 14.5.
So anyway I downloaded the Xposed Installer that is linked in Magisk Manager and installed it. Then I installed Xposed inside of Magisk. The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
daddylonglegs said:
... The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
Click to expand...
Click to collapse
Yes, I confirm, I don't know if it's caused by Magisk or because it's just a beta...
Anyway there is a workaround, instead of downloading the module from xposed manager, download the apk of the module from internet (official repo website or from whatever you want), because when you are going to install and enable the modules there are no problems, and after a reboot they're working.
Updated op to reflect install options. Happy modding everyone!
Success! ?
.. now for that network speed in the status bar hehe
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
KittyRgnarok said:
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
Click to expand...
Click to collapse
Did you download the modded apk as well? That's what threw me off
bush911 said:
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Click to expand...
Click to collapse
Don't know if it's supported. Of course you rebooted? I'm sure a lot of things will need slight tweaks to work on Oreo
pangolin.rollin said:
Did you download the modded apk as well? That's what threw me off
Click to expand...
Click to collapse
Yeah I did everything the same as the way you installed nougat Xposed systemlessly. Also the framework module caused a lot of choppiness on my phone so I uninstalled it anyways
Just a head's up that MinMinGuard causes my Pixel to start crashing like crazy
I have been thinking of installing this since last night, but with it still in beta and modules still needing fixed for 8.1 I just can't see any reason (other than something new for me to play with) that will benefit me enough to deal with the SafetyNet failure.
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
marsrolled said:
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
Click to expand...
Click to collapse
Not running it since it still doesn't offer a way to pass SafetyNet.
sliding_billy said:
Not running it since it still doesn't offer a way to pass SafetyNet.
Click to expand...
Click to collapse
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
marsrolled said:
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
Click to expand...
Click to collapse
I am happily enjoying the stock ROM on my XL and I keep the same installed on my wife's Pixel. I spent years swapping out custom ROMs on various devices and expected to do the same when I got the PIxels (very shortly after released almost 2 years ago). After the initial shortage of custom ROMs (due to the new OS engineering method) subsided and plenty came out, I realized there was nothing I was missing enough to deal with running custom and not being able to do a monthly update that takes me literally less than 10 minutes. Besides not missing anything, there is pretty much no bloat I need to get rid of, and the device still runs great even with a handful of "always on" apps. Probably best for you to look at the development sub-forum and do your research there and ask questions.
haven't used xposed in years. Is it still worth it with the recent android OS's?
nasedase said:
haven't used xposed in years. Is it still worth it with the recent android OS's?
Click to expand...
Click to collapse
That's like asking, "which tastes better, vanilla or chocolate?" Make a twrp backup, and give it a try, what you like, another may hate. For me, it's fun to add features when I'm using a rom that is lacking in that department.
give some idea or solution
Well As Per my knowledge MIcroG don't requires anything special like root or xposed framework to work. i use iYTB for non root(similar to OGYoutube) on G4 Play(Android 7.1) with microG integration and it works perfectly. You don't need Root permission for microG. So go ahead and try what you were trying. Thumbs up if i helped u out.
yuvi15 said:
give some idea or solution
Click to expand...
Click to collapse
For microG you need to support signature spoofing, wich you can get by manually patching the ROM or using Xposed.
UPDATE!
Tweet by @topjohnwu - https://twitter.com/topjohnwu/status/1035974346441932802
He clearly states that many apps are still using the old API which Google recently banned.
@z1_nile researched this app - SafetyNet Helper Sample. It has been updated to use the latest API for getting SafetyNet status. Those having root (using Magisk) can simply use the SafetyNet check in the Magisk Manager.
Hey there!
Can a few of you guys please try the SafetyNet Test app from the store and share the result?
Mine shows Failed for some reason -
Code:
SafetyNetApi.AttestationResult success == false or empty payload
I'm using a mostly untouched stock ROM with Camera2API enabled.
EDIT - I searched around for it. Data was obscure but seems that this is expected. Google has made some changes to the SafetyNet API and one needs an API key to make calls to the API (?). I just want to know if it's an issue with my device or it is expected.
PS - My device shows uncertified in Google Play Store.
yesterday, I enabled Camera2API and pokemon works, so phone passes safetynet test
GiZMoSK said:
yesterday, I enabled Camera2API and pokemon works, so phone passes safetynet test
Click to expand...
Click to collapse
Good to hear that. Did you install SafetyNet Test app from the Play Store and check its result?
no, but safetynet test and pokemon use same safetynet api
Mine with Camera2 API enabled and some system app deleted, and it's still working fine.
Why this happened? Running pure stock, locked bootloader, nothing funny just enabled camera2api, getting fota's as usual. But safetynet failed? Any solutions? Device is certified in play protect certification. Help needed.
Now I'm seriously tensed.
baunthiyal said:
Hey there!
Can a few of you guys please try the SafetyNet Test app from the store and share the result?
Mine shows Failed for some reason -
I'm using a mostly untouched stock ROM with Camera2API enabled.
EDIT - I searched around for it. Data was obscure but seems that this is expected. Google has made some changes to the SafetyNet API and one needs an API key to make calls to the API (?). I just want to know if it's an issue with my device or it is expected.
PS - My device shows uncertified in Google Play Store.
Click to expand...
Click to collapse
Elaborate. Please.
z1_nile said:
Elaborate. Please.
Click to expand...
Click to collapse
Here - Why did SafetyNet Attestation stop working?
Check the first answer.
baunthiyal said:
Here - https://stackoverflow.com/questions/50960332/why-did-safetynet-attestation-stop-working
Check the first answer.
Click to expand...
Click to collapse
Thanks
baunthiyal said:
UPDATE!
Tweet by @topjohnwu - https://twitter.com/topjohnwu/status/1035974346441932802
He clearly states that many apps are still using the old API which Google recently banned.
You guys can check out SafetyNet Helper Sample. This app has been updated to use the latest API for getting SafetyNet status. Those having root (using Magisk) can simply use the SafetyNet check in the Magisk Manager.
Hey there!
Can a few of you guys please try the SafetyNet Test app from the store and share the result?
Mine shows Failed for some reason -
I'm using a mostly untouched stock ROM with Camera2API enabled.
EDIT - I searched around for it. Data was obscure but seems that this is expected. Google has made some changes to the SafetyNet API and one needs an API key to make calls to the API (?). I just want to know if it's an issue with my device or it is expected.
PS - My device shows uncertified in Google Play Store.
Click to expand...
Click to collapse
You stole my research.
z1_nile said:
You stole my research.
Click to expand...
Click to collapse
LOL! You are Veda Vyasa?
baunthiyal said:
LOL! You are Veda Vyasa?
Click to expand...
Click to collapse
No but I'm the one who put safetynet helper sample app's screenshot which passed the test right in the comments. How can you say someone else found it while I posted it earlier.
z1_nile said:
No but I'm the one who put safetynet helper sample app's screenshot which passed the test right in the comments. How can you say someone else found it while I posted it earlier.
Click to expand...
Click to collapse
My bad, @z1_nile. I did not mean to pass off your research as mine or that of anyone else.
What I meant to say was, topjohnwu mentioned in his tweet that most apps do not use the new SafetyNet API whereas Magisk does.
The app to which I linked wasn't mentioned by him. I have corrected my mistake and given you credits for research.
Apologies.
z1_nile said:
No but I'm the one who put safetynet helper sample app's screenshot which passed the test right in the comments. How can you say someone else found it while I posted it earlier.
Click to expand...
Click to collapse
My bad, @z1_nile. I did not mean to pass off your research as mine or that of anyone else.
What I meant to say was, topjohnwu mentioned in his tweet that most apps do not use the new SafetyNet API whereas Magisk does.
The app to which I linked wasn't mentioned by him. I have corrected my mistake and given you credits for research.
Apologies.
baunthiyal said:
My bad, @z1_nile. I did not mean to pass off your research as mine or that of anyone else.
What I meant to say was, topjohnwu mentioned in his tweet that most apps do not use the new SafetyNet API whereas Magisk does.
The app to which I linked wasn't mentioned by him. I have corrected my mistake and given you credits for research.
Apologies.
Click to expand...
Click to collapse
Thank you
NOTE** After a week of using edexposed it was evident that my battery life suffered, as such please be aware of this trade off, for me it's simply not worth it but please read on if you're fine with it.. you'll still get a day but the difference is clear.
Xposed - Gravity box
Pre- requisites
Unlocked bootloader
Rooted
Magisk installed.
Process
------------
Download this: https://github.com/RikkaApps/Riru/releases
Install it using magisk
Reboot
Download this: https://github.com/ElderDrivers/EdX...6.2/EdXposed-YAHFA-v0.4.6.2.4529.-release.zip
Also install it using magisk.
Reboot
Open xposed and update to the full version.
Reboot
Download this: https://github.com/GravityBox/Gravi...0.0.0-beta-7_q/GravityBox_Q_10.0.0-beta-7.apk
Install it.
Activate in Xposed
Activate the Xposed manager too.
Reboot
Make activate the second you need then once complete
Reboot.
Once you've made one change your can alter on the fly
There's an image of what it looks like on my phone afterwards, I can't post it here as it's an edit, just check the thread
Thanks @burtonlax for reminding me that Xposed is still a thing.
It will appear off center as it's relative to the screen, bare in mind our cut out is on the left
If this thread looks odd, its because it started out as a question.
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
vsTerminus said:
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
Click to expand...
Click to collapse
So from what I have, what would I update?
Cheers man this is great to know.
Currently removed the clock from the status bar. Prefer it to on the left.
K-Klock may cause a bootloop so haven't tried that.
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Try gravitybox
burtonlax said:
Try gravitybox
Click to expand...
Click to collapse
Didn't that use xposed?
vsTerminus said:
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Click to expand...
Click to collapse
Thanks.
The right side? Why?? That would look mental.
Take a look at my screenshot
Battery round the camera, networks on the right, would have been perfect to have the clock in the middle, why would it wasn't the clock on the right too?
Anyway nvm appreciate your response. I think carbon has this option and probably PA. I'll probably the up on one of them.
Cheers.
dladz said:
Didn't that use xposed?
Click to expand...
Click to collapse
Yeah
burtonlax said:
Yeah
Click to expand...
Click to collapse
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
dladz said:
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
Click to expand...
Click to collapse
Yeah I'm running it now for an AOD mod on my OP8pro.
burtonlax said:
Yeah I'm running it now for an AOD mod on my OP8pro.
Click to expand...
Click to collapse
Of crap really lol
Which one did you install? Any info would be great
dladz said:
Of crap really lol
Which one did you install? Any info would be great
Click to expand...
Click to collapse
Edxposed, the yahfa one
burtonlax said:
Edxposed, the yahfa one
Click to expand...
Click to collapse
? You decided that the clock looked better on the left?
never heard of it tbh. How did you install it? The chap above seemed to be having issues.
I've just come across an issue myself, my phone has two OS's one is carbon the other is oxygen, trying to get back to oxygen.
This AB **** is really crap. Just doesn't need to be this tedious
EDIT: Just flashed the zip from oneplus to both slots then formatted data in stock recovery. Back now
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Daniel Hjelvik said:
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Click to expand...
Click to collapse
I agree
I'm trying to find the time which needs to be edited to move the clock.
Apparently it was changed to avoid notches..
Besides xposed there must be a way.
So yep gravity box seems to be our only way at the moment.
Added a guide to the op.
Sorry I know it's not easier to accomplish but that's avenue in 2020
PS: little off centre. It's already smiting me.
Added the date, looks ok now
I think it looks more natural on the left.
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
vsTerminus said:
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
Click to expand...
Click to collapse
Hmmm, where's your signal?