Hey, I have a Dasaita max10 head unit. It seems like my 3.5mm audio port has broken. Likely from trying out a non-Dasaita microphone. I’ve got crazy wind noise in my Jeep, so I’m trying to use a USB Asus noise cancelling mic adapter to cut out background noise.
Does anyone know if there’s a way to have the Dasaita (or generic android head unit) recognize the USB input as a microphone?
Thanks!
Related
Hello everybody , I'm owner of Ownice C200 Chinese head unit and i hate about audio quality and Bluetooth. I was using Behringer UCA 202 Usb dac but few months ago it stopped to work. Dac working with other devices but with head unit it is not working. When i use USB audio player, I can hear sound via headphone but from stock car speaker , no sound. For this i bought line converter to connect directly RCA from USB dac, but then i learned it need amplifier to power speakers. ( if i am wrong , please correct me)
I search a lot of topics in XDA and i saw one message using two head unit in car but there is no more information. I want absolutely same things. I want to use Pioneer deh-prs80 ( i will hide it somewhere in car) and will continue to use Android head unit for navigation, watching movies, rear view camera purpose. Is it really possibly ? I don't want to install any amplifier to my car, i don't need loud music, i just need clear and crystal music. I have hertz esk 165.5l as speaker.
If it's possible how will be connection ? Car battery enough to make power for both head unit ? ( i will connect speaker wire to directly pioneer) , is it possible to connect android head unit to pioneer via aux or Bluetooth or what ? I wish when i use android head unit, sound will go to pioneer and this head unit amplifier to speaker quality sound.
I also wonder if it is possible can be sound quality difference playing directly from pioneer or through android head unit to pioneer ?
I hope this topic will help to people who suffer from audio quality expect other features in android head unit..
Nobody can help ?
Well I would connect it via Y Splitter and the Front RCA out on the HU would go to the AUX in the Pioneer deck and connect your bluetooth to the Pioneer HU instead of the Android. You would have to zero out the sound from the Android and adjust your EQ settings from the Pioneer to get the best quality needed.
Hello everyone,
I got a dasaita px5 android 8 headunit and I am trying to add external speakers over the RCA Ports but they seem to be disabled or least they do not get any Output. Is there maybe a way to enable them over the software?
Hello, I've bought an android head units for my car because it's the only possibility. I can't use 1/2 DIN autoradio. So I bought on aliexpress the only head units that can fit in my Citroen C4 II.
I would know how I can connect this head units to my amplifier without using the poor RCA audio.
Can I use a USB DAC ?
Or a I2S to SPDIF ?
Thank you
Hi,
You can tap in direct into the speakers wires.....cut your wire 20-30-40 cm before your connection to the radio,and take one end into the amp out and the end coming fron the radio into the amp in.... look up high level connection on google.
Hi folks,
I bought this unit a while back and still have not been able to get any audio output from it.
https://www.aliexpress.com/item/1005002567795418.html
It's a V3 Pro with the SDM450, in the maximum configuration (6G+128G). It came with a RAISE CANBUS controller, so I've set it to all the various applicable vehicle choices in the factory settings and I still can't get any audio out. All connectors are plugged in, except one from the Junsun harness, which goes to nothing on the factory side. But the CANBUS cable is plugged in, so it should all be working, but still can't get audio out. I reached out to support, they suggested connecting the RCA cables from the harness to the Junsun unit's RCA AUX IN connections, but that doesn't do anything different.
Any suggestions? I feel like I may be missing a JBL specific harness or something, but everything I look up shows the same harness I have.
Best,
wtcnbrwndo4u
Hi. I bought an android head unit for my megane 2.2. All the sound is good except that my subwoofer doesnt sound like with my old Alpine player. I recently bought a bigger and better subwoofer, but its still doesnt sound like it should. I tried connecting to audio R and L and it gave a little more loud bangs, but more disortion. I have 1 subwoofer rca cable, bought a Y cable for it to make that double channel but its still the same disappointing result. Can I somehow make that work like it should or cant help that with these android head units. I want to mention that i dont have a subwoofer setting on the unit.
Link : https://www.aliexpress.com/item/100...0d5-7736-4cad-8f17-e97911a2fefc-1&pdp_ext_f={"sku_id"%3A"12000029501992407"%7D&pdp_npi=3%40dis%21USD%21159.26%21100.33%21%21%21%21%21%40210212c016773242106348294d0724%2112000029501992407%21sea%21RO%21926091275&curPageLogUid=NBigXtaxpApf
Hi!
If you bought this device in the link then Android DSP equalizer and output chip is to low to transfer bigger wattage to speakers.
One way to fix that is to buy external DSP output with more wattage then default android unit and connect amplifiers to this one, then reroute unit to use this external output.
If you have external subwoofer with amplifier try to decrease output to this amplifier in extra settings or factory menu (pin code) / sound. Output will usually be marked as speakers.