Hello everybody , I'm owner of Ownice C200 Chinese head unit and i hate about audio quality and Bluetooth. I was using Behringer UCA 202 Usb dac but few months ago it stopped to work. Dac working with other devices but with head unit it is not working. When i use USB audio player, I can hear sound via headphone but from stock car speaker , no sound. For this i bought line converter to connect directly RCA from USB dac, but then i learned it need amplifier to power speakers. ( if i am wrong , please correct me)
I search a lot of topics in XDA and i saw one message using two head unit in car but there is no more information. I want absolutely same things. I want to use Pioneer deh-prs80 ( i will hide it somewhere in car) and will continue to use Android head unit for navigation, watching movies, rear view camera purpose. Is it really possibly ? I don't want to install any amplifier to my car, i don't need loud music, i just need clear and crystal music. I have hertz esk 165.5l as speaker.
If it's possible how will be connection ? Car battery enough to make power for both head unit ? ( i will connect speaker wire to directly pioneer) , is it possible to connect android head unit to pioneer via aux or Bluetooth or what ? I wish when i use android head unit, sound will go to pioneer and this head unit amplifier to speaker quality sound.
I also wonder if it is possible can be sound quality difference playing directly from pioneer or through android head unit to pioneer ?
I hope this topic will help to people who suffer from audio quality expect other features in android head unit..
Nobody can help ?
Well I would connect it via Y Splitter and the Front RCA out on the HU would go to the AUX in the Pioneer deck and connect your bluetooth to the Pioneer HU instead of the Android. You would have to zero out the sound from the Android and adjust your EQ settings from the Pioneer to get the best quality needed.
Hello, its posible to control aux out line L/R or SUBWoofer out line[Mono], level or use EQ on it without changing head unit sound to speakers?
I want connect amplifer and subwoofer but i dont like line out level its to much , me external amplifer on lowest level already... and maybe posible use EQ on line outs?
im using cheap head unit [seicane H605E].
thanks for answers.
So I replaced my head unit with a after market one a few months ago.
the exact model is an Xtrons TE706PL.
I also have a good set of car speakers ( 2x pioneer ts-g1720f (front door), 2x caliber cds46(trunk)
they work great and stuff but when I try going for more bass the sounds starts cracking. I know I could get a subwoofer to fix
but I wanted to try if it was possible to connect a bluetooth speaker to my car headunit. I have a JBL Boombox which sure pumps out more bass for sure. My idea was maybe trying to connect the JBL boombox to my headunit via bluetooth and using it as a Sub.
Did anyone try this? Is it even possible? if not I think I might have to get a Sub after all but I'd rather keep the 200-300 dollars in my pocket (I don't have a separate car amp and even though my head unit does have a sub input I'm not sure if that's actually a good think with the head unit amp(4x 45w)
any other thoughts and Ideas are more than welcome.
PS. im not 100% sure if this is the correct place to ask this
Hello, I've bought an android head units for my car because it's the only possibility. I can't use 1/2 DIN autoradio. So I bought on aliexpress the only head units that can fit in my Citroen C4 II.
I would know how I can connect this head units to my amplifier without using the poor RCA audio.
Can I use a USB DAC ?
Or a I2S to SPDIF ?
Thank you
Hi,
You can tap in direct into the speakers wires.....cut your wire 20-30-40 cm before your connection to the radio,and take one end into the amp out and the end coming fron the radio into the amp in.... look up high level connection on google.
Hello guys,
I have a S8 Premium and i cant get the subwoofer to work.
So my connections are:
From the Atoto subwoofer output to the amplifier and from the amplifier to the subwoofer. A complete normal connection between radio and subwoofer.
When i connect the subwoofer to the RR/RL or FR/FL it works like a normal speaker but when i connect it to the subwoofer output like it shud be it doenst work.
I made a video trying to find the subwoofer settings and i cant find it, i have seen alot of videos where you can turn on/off the subwoofer, but in my atoto i dont have that functionality.
Can anyone help? Thanks guys!
Here is the vídeo :
AlexisGarci said:
Hello guys,
I have a S8 Premium and i cant get the subwoofer to work.
So my connections are:
From the Atoto subwoofer output to the amplifier and from the amplifier to the subwoofer. A complete normal connection between radio and subwoofer.
When i connect the subwoofer to the RR/RL or FR/FL it works like a normal speaker but when i connect it to the subwoofer output like it shud be it doenst work.
I made a video trying to find the subwoofer settings and i cant find it, i have seen alot of videos where you can turn on/off the subwoofer, but in my atoto i dont have that functionality.
Can anyone help? Thanks guys!
Here is the vídeo :
Click to expand...
Click to collapse
Did you ever get this figured out? I found the sub settings but the output is very low even turned all the way up in the eq app.
@slow66
gotta get a line driver :|
https://smile.amazon.com/Peripheral-PAC-LD10-Driver-Booster/dp/B003LWV77Y
cheaper on ebay.
Amazon.com: Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5 : Electronics
Buy Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5: Connectors & Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
smile.amazon.com
tap either acc or amp wire to power it
Another alternative line driver that others have used that has Front/Rear/Sub in/out
https://www.amazon.com/dp/B07PJ2KZ63/ref=cm_sw_em_r_mt_dp_MMG5JVGQ6NBM5F3S729Q
ziddey said:
@slow66
gotta get a line driver :|
https://smile.amazon.com/Peripheral-PAC-LD10-Driver-Booster/dp/B003LWV77Y
cheaper on ebay.
Amazon.com: Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5 : Electronics
Buy Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5: Connectors & Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
smile.amazon.com
tap either acc or amp wire to power it
Click to expand...
Click to collapse
Douglas_D said:
Another alternative line driver that others have used that has Front/Rear/Sub in/out
https://www.amazon.com/dp/B07PJ2KZ63/ref=cm_sw_em_r_mt_dp_MMG5JVGQ6NBM5F3S729Q
Click to expand...
Click to collapse
Nice, I just ordered this one to boost up my sub output:
Install Bay - Line Driver/Line Output Converter 2 Channel - Retail Pack (IBR67), Display Products https://www.amazon.ca/dp/B01M0A124S/ref=cm_sw_r_apan_glt_i_AJGJF11KVW9Y84S2RE8Y?_encoding=UTF8&psc=1
But I really like that 3 way one idea too hmmmm.....
The Subwoofer rca output in the manual indicates it at .5 volt. Most mid model head units deliver 3-5 volt output as you may already know. The best solution is to purchase a D.S.P or a crossover, etc. Line drivers usually have alot more than 1% THD. Most name brand types of car audio have become real affordable. I use a Rockford Fosgate 3.sixty.3 that allows voltage adjustment from 2-8 volts of output. Also make sure you use a good quality rca cable that is insulated and is OFC. I use Stinger 8000 or 9000 rca cables and Sky High triple sheilded makes a good set . They make a drastic difference . I had to buy a Y rca splitter as the sub output only has one out.
opps i forgot some links
https://www.amazon.com/Stinger-SI8212-2-Channel-Audiophile-Interconnect/dp/B006AF53AG/ref=sr_1_1?dchild=1&keywords=stinger+8000&qid=1633400565&sr=8-1
https://www.amazon.com/gp/slredirect/picassoRedirect.html/ref=pa_sp_atf_aps_sr_pg1_1?ie=UTF8&adId=A0777206REMGO6K8CEOP&url=%2FPRV-PRO-Electronic-Crossover-Output%2Fdp%2FB07YCV88VY%2Fref%3Dsr_1_2_sspa%3Fdchild%3D1%26keywords%3Dcrossover%26qid%3D1633400641%26sr%3D8-2-spons%26psc%3D1%26smid%3DA2CMBKBPWFWAHW&qualifier=1633400641&id=810613280838192&widgetName=sp_atf
Rockford Fosgate 3Sixty.3
Programmable 8-channel digital signal processor
www.crutchfield.com
The Epicenter® by AudioControl (Black)
Bass restoration processor
www.crutchfield.com
I have the same issue. I have an S8 Standard in dash. I cannot get any "Subwoofer" output from the unit. IF I connect any 2 channels from the unit to the subs amp. It works only after I have adjusted the Bass settings in the eq. But I don't have control over the Sub sounds really. However, But if I connect the single RCA "Sub Out" from the back of the Atoto S8 unit. I get absolutely no output. So I got a T splicer and connected the single Sub Out to Both RCA inputs on the amp. Still nothing. I know its only .2v output from the head. The amps input sensitivity is .250v-6v. Its a Nakamichi NKMD60.4 4 Channel amp, Bridgeable. 1500watts max. Connected to a Polk Audio DB+ 8 Inch 750 Watt 4 Ohm DVC.
But I should hear something. The gain on the amp is maxxed out. And My amp requires two channel inputs. But the head only has 1 RCA "Sub Out". So what am I missing? Is the power from the HU not enough? Or do I need a Line Booster? Or am I missing another step I don't know about. I checked the HU Sub Settings and the frequencies are within range. But still no output from that Sub jack on the back. I have a PAC LD-10 Ground Loop Isolator Adjustable Line Driver Signal Booster+10X Preamp on order. Should be here Tuesday. Im hoping this will solve the problem. Any Ideas?
JRShreds said:
I have the same issue. I have an S8 Standard in dash. I cannot get any "Subwoofer" output from the unit. IF I connect any 2 channels from the unit to the subs amp. It works only after I have adjusted the Bass settings in the eq. But I don't have control over the Sub sounds really. However, But if I connect the single RCA "Sub Out" from the back of the Atoto S8 unit. I get absolutely no output. So I got a T splicer and connected the single Sub Out to Both RCA inputs on the amp. Still nothing. I know its only .2v output from the head. The amps input sensitivity is .250v-6v. Its a Nakamichi NKMD60.4 4 Channel amp, Bridgeable. 1500watts max. Connected to a Polk Audio DB+ 8 Inch 750 Watt 4 Ohm DVC.
But I should hear something. The gain on the amp is maxxed out. And My amp requires two channel inputs. But the head only has 1 RCA "Sub Out". So what am I missing? Is the power from the HU not enough? Or do I need a Line Booster? Or am I missing another step I don't know about. I checked the HU Sub Settings and the frequencies are within range. But still no output from that Sub jack on the back. I have a PAC LD-10 Ground Loop Isolator Adjustable Line Driver Signal Booster+10X Preamp on order. Should be here Tuesday. Im hoping this will solve the problem. Any Ideas?
Click to expand...
Click to collapse
hey I am in the same boat with the S8 premium, any luck with the booster? and where do you mount it by the amp? or by the head unit?