Hi guys
I need help
I tried to hpdate my tesla style head unit PX3 android 7.1. But it is now stuck on this screen and does not turn on.
Before i start the update the AC was on and i can not turn it off now !!
Any ideas?
Salman2090 said:
Hi guys
I need help
I tried to hpdate my tesla style head unit PX3 android 7.1. But it is now stuck on this screen and does not turn on.
Before i start the update the AC was on and i can not turn it off now !!
Any ideas?
Click to expand...
Click to collapse
Hello, I cannot read the error, the image is very low resolution, can you try to take another picture (don't post it with imgur since that is blocked on my school computer) you can try uploading to http://pomf.cat
Wrong forum
marchnz said:
Wrong forum
Click to expand...
Click to collapse
how is it the wrong forum, it is an android head unit
$cronos_ said:
how is it the wrong forum, it is an android head unit
Click to expand...
Click to collapse
Unit is NOT (Android automotive OS.)
You have a grey market chinese origin android head unit they are two very different things
Ask a moderator via the report button to move this to (Android Head-Units) .
@ludditefornow might be able to do that for you too.
Related
Dear all.
I'm Ramzi and I'm totally new in this type of technology so I urge you to help me.
I have Chinese unit dvd in my Hyundai Sonata 2013.
Brand : HITS car DVD, HYUNDAI SONATA LED10-11 / SUPER HIGH RESOLUTIONS 1024×600.
Modal: ANHY822 / 8913AG
Website: http://www.hicesan.com/?p=719
by mistake I flashed android MCU update to my unit white it's Wince, the dvd is still working but the screen is black.
full story
At beginning I tried to update it with last Android software for Middle East from HITS site,so I tried many time but it didn't read the Update from the SD card. So I thought that I should update the MCU first, so I flashed Android MCU update to my unit while it's Wince, so screen goes black and the dvd is still working with black screen. Because I wasn't aware that my unit is Wince not Android.
So now I urge you to help me, what should I do to get the screen back and if i can change from Wince to full android unit.
I'v Emailed HITS company, but unfortunately the r not helpful.
Please guide me with proper steps and software because there is no technical in Yemen for such unit.
Regards
Ramzi
Hello,
The same thing happened to me, i have a dsr-n 270 head unit.
i updated the MCU as the constructor's instruction but the screen stays black now.
When i power it on it writes android as if it will start normal then the screen becames white then black.
I detect the HU bluetooth and the buttons make sound when i press.
someonne can help us pls?
Sorry for my english....
No one to help us??
Sam9933 said:
No one to help us??
Click to expand...
Click to collapse
Have you tried contacting the manufacturer? Maybe they could point you in the right direction. My knowledge is limited, but I would look into something for reinstalling the MCU/Firmware from download/and or recovery mode. Sorry I couldn't be of any more help. But that is where I would start looking. Its not a pure Android unit, so it may be more difficult to do as from what I understand winCE units emulate the android OS from inside the winCE OS (not sure if this unit is only winCE or if it is both winCE/Android.)
Yes i tried to contact "pearl" the seller of this model, they asked me to sent it to them 35 euros diagnostic+shipping cost.
They are not willing to help because a lot of people got the same problem, they gived us an update that breacks the head unit.
yeah i looked for the recovery/donload mode buit found nothing.
THis brand are not helpful and they keep all information.
All people who want to buy an android head unit avoid Navgear...
Yeah, bud... I'm sorry you got the shaft. That really sucks man. I'm sorry I couldn't help you more.
Hey guys!
I'm hoping you can help me out with some issues I've got with my Android head-unit.
The model is a NAVD-MT049 for an Audi A3.
It's got the reverse cam installed, and for a while now I've been having issues with the video feed.
I've noticed that sometimes when I switch in reverse the camera first displays No Signal, and then after a minute or so it starts working. This happens almost everytime now.
Any tips on what could be the issue?
The wiring is done as it should be, and I've been using it for 3 months now.
Do I need yo get an MCU update?
I've read that on some models this can solve the issue, but I haven't found a website where I have the compatible version for this unit.
Any feedback is welcome!
S13ppy said:
Hey guys!
I'm hoping you can help me out with some issues I've got with my Android head-unit.
The model is a NAVD-MT049 for an Audi A3.
It's got the reverse cam installed, and for a while now I've been having issues with the video feed.
I've noticed that sometimes when I switch in reverse the camera first displays No Signal, and then after a minute or so it starts working. This happens almost everytime now.
Any tips on what could be the issue?
The wiring is done as it should be, and I've been using it for 3 months now.
Do I need yo get an MCU update?
I've read that on some models this can solve the issue, but I haven't found a website where I have the compatible version for this unit.
Any feedback is welcome!
Click to expand...
Click to collapse
Is the head unit an MTCB?
marchnz said:
Is the head unit an MTCB?
Click to expand...
Click to collapse
No, you're right it's not an MTCB, it's a chinese head unit and the MCU is TS907.
Maybe the moderators cand move this post to the correct thread?
S13ppy said:
No, you're right it's not an MTCB, it's a chinese head unit and the MCU is TS907.
Maybe the moderators cand move this post to the correct thread?
Click to expand...
Click to collapse
You'll need to use the report post button to summon a moderator
Hello! I have on my car px5 rk3368 android 10 unit, and some times the unit stuck at deep sleep and not wake when i press the buttons or turn on egnition.. Does this once every 4-5 months, there is no any pattern to understand the problem..
Once this problem happen the only way to turn on the radio is to unplug it and let it off the car for few days.. I tried to let it off the power few hours didn't worked.. After few days if i plug it back in work like charm lol.. I have no idea what it could be..
I think it's software related.. Maybe it's good idea to flash other os? But im not familiar with android car units, im very good with phones but car units never tested
Any idea how i can make the unit work? Or if its worth to flash other os?
Thanks in advance!
Is it an MTCD/E device?
marchnz said:
Is it an MTCD/E device?
Click to expand...
Click to collapse
I don't remember and right now i can't open it to check it, I'm waiting 2 days after that it will work again and check it!
marchnz said:
Is it an MTCD/E device?
Click to expand...
Click to collapse
Well i let the radio out of the car but again didn't open at all, so i removed the battery of the car for 1 mim and after radio worked again like charm! No idea what is the problem..
Im uploading the info of the radio because i will try change the operating system
Edit : on the android settings there is no any mcu info, is there any other way to check what mcu i got?
Not MTCD, requested mod moves to (Android head-units) forum
Hello,
I have recently purchased a 12.3 android unit and got round to installing it the other day.
Everything works on the unit the only problem I seem to be having is a timed cut off on the android unit of the old ccc.
The ccc menu will only power on the android side when the old power plug is connected to the old screen. I can remove the power from the old screen and it will still run on the android side for a short amount of time before doing the same. I have to connect the old power plug back to old screen for it to load up on the android side.
Any help would be much appreciated
Is it an MTCD device?
marchnz said:
Is it an MTCD device?
Click to expand...
Click to collapse
All I know is that apparently it is a 8gb ram model with the MTK P60 processor
GrizzlyE70 said:
All I know is that apparently it is a 8gb ram model with the MTK P60 processor
Click to expand...
Click to collapse
It's not an MTCD device, you might get better exposure in the android head units forum.
I've requested a moderator moves this post to Android Head-units forum.
How do I find out which head unit unit I have? MTCB or MTCB. It's unbranded
Settings --> about Tablet
Does not say
Show a pictures of Settings --> about machine
??????
MTC Boards always start with MTC .... Yours does not seem to be a MTC because under MCU it is written "CM".
I'm stumped then.
is something not working?
Constant crashing, freezing, refusing to install some apps etc.
Not MTCD, requested moderator move to [Android Head units forum]
How hard can little reading be.
marchnz said:
How hard can little reading be.
Click to expand...
Click to collapse
A little more understanding for people who are not as deep as some here in the matter would be nice!
If the creator doesn't know his system, how is he supposed to know where to post?