Hello, I have been using Lineage OS for 1.5 years. Unfortunately, the last time it suddenly stopped waking up from the blank screen and I had to restart it. After rebooting the loading bar LOS frequently stutters or freezes that you need to restart again. I can only use the phone when I manage to get into the phone and turn on the active screen all the time.
I finally decided to wipe the phone and reinstall LOS, unfortunately the same thing right away.
I also tried
[EXYNOS] [UNOFFICIAL] Resurrection Remix Q V8.7.3 04/30/2022 - here the system won't turn on at all and the Resurrection Logo is stuck.
I also tried [ROM] [DISCONTINUED] [10] Havoc-OS 3.x [tbelteskt] [tre3calteskt] [trelteskt] [treltexx] - the phone easily enters the system every time, but after the screen goes blank, the phone can no longer be wake up.
Between the programs, I also tested the old original system - to my surprise - the phone works as it should without any problem.
Where can you look for the problem?
Before flashing custom ROM you should format the data partition, not just wipe it.
Installing a stock ROM, does that for you.
I don't have any old data left on the new system.
Normally every time in TWRP I use Wipe> Format Data and Wipe> Advanced Wipe and select Dalvik / ART Cache there; System; Date; Internal Storage; Cache; Preload.
I also tried to leave the old system unchanged, or partially erase it with no results.
I am using TWRP 3.5.2_9-0 from anaja.
Edit: In general, when I manage to get on the phone, if I leave the screen on, the phone will work all the time, but if I leave it off longer, I may not turn on the phone anymore and need to restart.
On the other hand, with the inputs to the system, system jams on Resurection happened to me, but they stopped.
Edit 2: The systems that work for me are:
[ROM][N910C/H/U/S/L/K][GraceUX][A3-A5 July Security Base]Air Rom v3.0
[ROM][7.0][TW][Exynos][Stable]Refined Nougat N7FE Port 6.0
Related
I tried changing the font with font changer. When it turned back on, the touch screen was unresponsive. The tab would keep restarting itself, and when it booted to the lockscreen it would just stay unresponsive until it restarted again. I got into recovery and wiped data, cache, and dalvik and installed another rom (I was using AOKP M4 and tried going back to Build 26). About a minute after going through the gapps setup, the screen became unresponsive and the looping started again as usual. I tried going to M4, Build 26, and Build 27 countless times and wiped those three things repeatedly but I always get the same result. What do I do?
You probably need to restore using ODIN
might work
prinzmetal6 said:
I tried changing the font with font changer. When it turned back on, the touch screen was unresponsive. The tab would keep restarting itself, and when it booted to the lockscreen it would just stay unresponsive until it restarted again. I got into recovery and wiped data, cache, and dalvik and installed another rom (I was using AOKP M4 and tried going back to Build 26). About a minute after going through the gapps setup, the screen became unresponsive and the looping started again as usual. I tried going to M4, Build 26, and Build 27 countless times and wiped those three things repeatedly but I always get the same result. What do I do?
Click to expand...
Click to collapse
Clean out everything: cache, user data (if possible, wipe everything from the sdcard partition)and then try another rom N if that still doesn't work then I think ODIN will be your best friend!
Odin worked...thank you!
Hi!
I recently updated my ROM to the Paranoid Android 3.98, I did a full wipe, flashed the ROM, latest Gapps (with TWRP) and ever since the tablet has been become really laggy on opening apps or doing anything. I realised something was wrong straight after I booted it up by how long it was taking to connect to the WIFI etc.
Anyway, its hanging a lot on the unlock screen and sometimes I get a "Process System is not Responding" prompt. I've tried going back into recovery and clearing the caches/data again and its still hanging. Ive also tried using CWM recovery to wipe the tablet, flash the ROM/Gapps etc and its still really slow. Lastly, I just tried a factory reset from the settings menu and again, its still the same!
Any ideas on whats up with it and how to sort it out? I was thinking about unrooting it back to stock although I think the problem will still probably happen. I came from the PA 3.95 build and did a clean flash.
Cheers!
Chris
I think I have fixed it by following a post by Chasmodo on how to do a super-clean install.
1) I booted into recovery.
2) Did the three wipes (Data, Cache, Dalvik) several times over.
3) Went to Mount & Storage and formatted both system & cache*.
4) Flashed PA 3.98 & latest PA-Gapps.
5) Wiped both caches again and rebooted.
As soon as connecting WIFI, signing into Google I could tell it was running a lot faster again and now the lag on the unlock screen & opening apps seems to have stopped, also haven't had the "System Process isn't Responding since."
*Chasmodos version of the super-clean install didn't say to format the cache as well although I had tried just formatting the system and it didn't fix the issue. So I thought I'd try the same process with a cache format as well and now all issues seem to have been rectified.
Cheers
Chris
Hey guys,
The core issue is this:
When I click enable Bluetooth it stays stuck on turning on for around 15 seconds before it goes back to green and then "tries again" by turning half-green (turning on status) and then again.
Once in a few attempts (one in a hundred or so), the Bluetooth gets turned on but gets shut off for unknown reason within around 15 seconds.
This core issue happened with the following:
Omega rom after full wipe.
Arrow rom after full wipe.
Ozcan rom after full wipe.
And most amazingly: Stock rom after full wipe.
Yes, this issue even happens with stock rom.
Full wipe includes dalvik cache, cache, system, data, internal SD card.
Now, is this a hardware issue or a software issue?
What should I do?
Thanks!
Ended up "solving" this by doing a stock restore via Odin, after which TouchWiz would never load an icon (crash loop). Reinstalled TWRP via Odin, then flashed ViSiON X N3 via TWRP.
--
Morning guys,
I've had some reboots lately and a weird situation last week where I had to do operating system surgery to get the thing to boot at all.... HOWEVER things were going quite well for some time, and it's been rooted and non-stock for months.
Nevertheless I woke up this morning and it was off, I figured the battery had died so I swapped batteries... It boots, it gets to the launcher and it loads the app icons then freezes and reboots... over and over again.
edit: to be clear, as soon as the slider bar touches the right-hand side the phone freezes, the vibration holds for several seconds, and then the device reboots. obviously not what one expects from this operation (having done it before). I was able to wipe the Cache separately... trying to wipe the Dalvik cache all by itself in an advanced wipe does this reboot thing.
OK I said, i will just clear and reflash this.
Going into TWRP, attempting to do a factory reset wipe just freezes, buzzes, and reboots immediately (to the not working OS)... in order to make this all stop I pull the battery, because now the button on the side won't seem to do a hardware poweroff for anything. Just ends up resetting the current reboot.
--
Any advice would be helpful now. I was just going to say forget it and grab the tiniest ROM i could find and ride it out until I upgrade the device, but now I'm just concerned with getting it active. The rebooting in recovery when trying to do a wipe does not make me feel too great. First and only problem I've had with android roms.
Thanks,
Chris
Hi all, this is my first post so be nice!
First off, I'm a complete newbie when it comes to flashing custom roms. I've had my G900F for almost a year now and I always hated one thing about it: TouchWiz (or DungWiz as I like to call it). So, last week, I decided to take the plunge and flashed albinoman's CM13 on it. For the most part, it has served me well but I wanted to try out VRToxin as well and so, I flashed it today. However, I wasn't able to get past the Welcome screen because of constant 'SystemUI has stopped' error loop. To better explain my problem I'll list exactly what I did:
Note: Before flashing VRToxin, I had CM13 Dec 10 build.
1. Downloaded VRToxin-v2.0-20151205-klte-RELEASE and Stock GApps from opengapps.org
2. Copied the files to phone's internal storage.
3. Shut down the phone and booted it into TWRP.
4. Did a full nandroid backup.
5. Did a full wipe: Delvik cache, System, Data and Cache.
6. Flashed the VRToxin rom and then flashed the open gapps (stock)
7. Rebooted the phone and got to the Welcome screen. However, I cannot get past this as 'SystemUI has stopped' error keeps popping up.
I've since restored CM13 from TWRP backup.
If anyone can help out with this problem or provide info about why this is happening, I'd greatly appreciate it!
NadirMichael said:
Hi all, this is my first post so be nice!
First off, I'm a complete newbie when it comes to flashing custom roms. I've had my G900F for almost a year now and I always hated one thing about it: TouchWiz (or DungWiz as I like to call it). So, last week, I decided to take the plunge and flashed albinoman's CM13 on it. For the most part, it has served me well but I wanted to try out VRToxin as well and so, I flashed it today. However, I wasn't able to get past the Welcome screen because of constant 'SystemUI has stopped' error loop. To better explain my problem I'll list exactly what I did:
Note: Before flashing VRToxin, I had CM13 Dec 10 build.
1. Downloaded VRToxin-v2.0-20151205-klte-RELEASE and Stock GApps from opengapps.org
2. Copied the files to phone's internal storage.
3. Shut down the phone and booted it into TWRP.
4. Did a full nandroid backup.
5. Did a full wipe: Delvik cache, System, Data and Cache.
6. Flashed the VRToxin rom and then flashed the open gapps (stock)
7. Rebooted the phone and got to the Welcome screen. However, I cannot get past this as 'SystemUI has stopped' error keeps popping up.
I've since restored CM13 from TWRP backup.
If anyone can help out with this problem or provide info about why this is happening, I'd greatly appreciate it!
Click to expand...
Click to collapse
The problem is GAPPS. I noticed this too. Just do a full wipe (i know, again ) and install the GAPPS from VRToxin (filename = vrtoxin-gapps-mm-20151101). Link = http://downloadandroidrom.com/file/GalaxyS5/900froms/VRToxin. I don't have a actual fix but he its a workaround :cyclops:
Thanks Dante, I'll give it another go
NadirMichael said:
Thanks Dante, I'll give it another go
Click to expand...
Click to collapse
And? did it worked?
I'm gonna be honest with you im currently searching for the stock Lollipop (rooted) for S5 (SM-G900F) because this ROM isn't working for me.
- Bluetooth isn't working. (it does not turn ON, you can slide but its still OFF)
- 2x clock-app in the menu
- Music player does not work even the google play music app. ( i use VLC media player)
- No fingerprint security lock.
But its a pain in the [email protected]#$%^&*()_+ to find it here on XDA. If you know where to find it please let me know.