Hi all... got a Note FE which I'm starting to think has something wrong with the kernel, or maybe the whole OS itself. Bone stock still on 7.0 due to:
1. No MTP, no D/L mode in USB port - charges just fine though.
2. USB MTP and D/L mode only works on 1 specific PC in the house, an old HP with win 7 in it.
3. When I use the said old PC to Odin Flash this thing, it fails.
4. I'm saying it may be the kernel as I've changed the USB C port twice already, with new hardware, thinking there was something wrong with part.
Your thoughts? The phone works beautifully otherwise though. I can't put in TWRP even if I wanted to as I can't Odin into it.
Is there an update I can get that can be used with the stock recovery?
Related
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!
PC&Odin not able to detect phone via USB after flashing custom ROM: tried dif pc too
Hi all,
I've recently flashed this awesome ROM: [GearCM][i9500][4.4.4] Optimized CyanogenMod 11 for Samsung Galaxy S4 [20140912] in my device. ROM works great, very stable, fast performance, however since install, I am not able to detect my phone via USB. Not even ODIN sees the device connected.
Was doing my research before posting, so I will let you know what I've tried which was recommended in other posts and google:
1. Re-installed Samsung USB Drivers: No Go
2. Used different USB Cables (using stock one that came w/ phone right now): No Go
3. Tried different USB Ports: No Go
4. Tried a different PC: No Go
5. Yes, I am testing with my screen unlocked
Anything else I can try? Maybe a setting in my Phone?
Thanks!
Odin should always see your phone in download mode. No rom will change that.
If Odin doesn't detect your phone in download mode then it's either a:
- Driver problem
- Cable/port problem
- Faulty usb port
By the way, the device charges normally when connected to my computer USB.
Lennyz1988 said:
Odin should always see your phone in download mode. No rom will change that.
If Odin doesn't detect your phone in download mode then it's either a:
- Driver problem
- Cable/port problem
- Faulty usb port
Click to expand...
Click to collapse
Good call. Odin is not detecting the phone in download mode-- so I guess we can eliminate problem in the device configuration.
I'm going to try again in another PC and different cables. Maybe my Cable went bad, sucks because it's pretty new? Going to copy Odin to a pen drive so I can try in friends computer. On other PCs I only tried connecting in Windows-- no download mode & odin.
Ok, so I was able to get working back.
I enabled developer options by going in about and clicking the build 7 times. Proceeded to go to Debugging options and selected Android Debugging marked. Reinstalled Drivers again, then it showed PC connected as Media Device on notifications. I clicked there and changed to Camera PTP and then back to MTP.
Now I'm able to see the Device again!
No idea why I was not able to see it in Odin while on download mode, however, I can see it now even when not download mode.
Thread can be closed, thanks!
hello
i have a problem with my g928f
my issue is that it can not be regognized by the windows
i have tried at my desktop with win 10 and at my laptop with windows 7 and at both says unknown device,
i have tried everything i know of
unistall everything from the pc regarding samsung drivers
install it again , nothing
install smart switch , nothing
install kies, nothing
run odin , not even see the phone at download mode
made factory reset from recovery , nothing
charge is working just fine both from pc and my wall charger
i tried mhl hdmi and nothing happened
tried just now otg cable with a usb drive , again nothing
just a week ago i was using it just fine with my pc
should i take it to a store to check my micro usb port??
noone??
today i replaced the screen with a new one witch had a new usb dock on it and the problem is still here
i can not connect it to any pc.
i cann't flash the stock rom because odin is not see it also
is it possible to be a rom problem????
i can't flash the stock one because of the usb issue
but i think i can download another lollipop rom to give it a try.
Have you made sure that it is set as MTP?
Setting - Storage - USB.
Check if the device gets connected in Fastboot mode. If it doesn't then it would be your USB.
sideload is not working either
usb is brand new and original.
is there a way to flash stock rom via recovery?
Have a note 4 on a custom rom- android kitkat. Was working fine, until i wiped data/cache a few times in TWRP recovery to do a clean install of the rom. Phone restarted without an OS, and then i couldn't get pass the boot logo screen. Couldn't flash any rom in recovery. So i did a restore thru TWRP from a backup. So now the phone boots, but it pc won't recognize it. Everytime i plug it, I get "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it". Under device manager, I get "Unknown USB Device (device descriptor request failed)".
Things I have tried:
-Uninstalled usb drivers and let windows reinstall,
-at least 5 different usb cables
-at least 3 different Samsung oem usb cables
-other usb ports on the PC
-3 different pc (all with same- so im guessing its a problem with the phone)
-physically tried to push up the usb port on the phone- bad connection (someone recommended on google search)
- even when as far to reinstall windows OS
-*#0808# and set it to AP, MTP + ADB
-yes usb debugging is enabled
-download mode (odin does not see the phone, so cannot flash stock/custom rom
-diferent versions of odin
-different version of Samsung usb drivers
-have other samsung phones (note 5, and s6) and windows recognize those.
-phone does charge thru usb
need to get phone working again
-
Download stock rom from sammobile and flash it via odin.
Or else, flash the cf auto root file via odin, this reset all partitions.
Reporting Via N910G.
yashthemw said:
Download stock rom from sammobile and flash it via odin.
Or else, flash the cf auto root file via odin, this reset all partitions.
Reporting Via N910G.
Click to expand...
Click to collapse
You might try reading the whole post, rather than just replying.
JagDave said:
You might try reading the whole post, rather than just replying.
Click to expand...
Click to collapse
Sorry, my bad.
So, the author can try to repair partitions via twrp.
Go to wipe/advanced wipe and then select "Repair or change file system".
Select the partitions and repair them.
Reporting Via N910G.
Honestly man search my username ziggsta2 I had the same issue I had to buy another note 4 and even this used phone I got off eBay has the same problem when I wiggled the micro USB cord up and down I got it to connect, I don't suggest you doing this, but what might work is taking a very small piece of plastic and cleaning out your USB port on your phone, I believe these ports go bad after awhile as I have encountered this twice on two separate devices maybe you have a different issue but theres my two cents
ziggsta said:
Honestly man search my username ziggsta2 I had the same issue I had to buy another note 4 and even this used phone I got off eBay has the same problem when I wiggled the micro USB cord up and down I got it to connect, I don't suggest you doing this, but what might work is taking a very small piece of plastic and cleaning out your USB port on your phone, I believe these ports go bad after awhile as I have encountered this twice on two separate devices maybe you have a different issue but theres my two cents
Click to expand...
Click to collapse
i have tried. at this point i think it's hardware failure with the usb port. Stupid buying those cheap usb cables probably damaged the port because it seems to require a little more force than samsung cable. Planning ordering one and replacing. hopefully i don't do more damage. Had this phone for a long time and miss flashing roms on it.
i have still not fixed this problem....lol. had a new phone and been in drawer. did replace the usb port but it wasn't the problem. would like some solutions if anyone can help.
jxlee0215 said:
i have still not fixed this problem....lol. had a new phone and been in drawer. did replace the usb port but it wasn't the problem. would like some solutions if anyone can help.
Click to expand...
Click to collapse
Replace the battery
Hi,
I have rooted my phone few mounts ago, and now I run the LightROM with anroid 9.0
Now I want to go back to stock, so I downloaded some latest ROM (DBT) and tried to use Odin to flash it.
BTW, I want to go back to stock since I have some reception issues that I think could be solved by using a stock rom (stock modem).
But I can't detect the phone in Odin, the phone is not recognized by any computer I used (already tried 4).
So I can't use Odin.
Some background, I can't use fast cable charging from some reason, I think it's an hardware issue and not software (it's been the same with any ROM I tried).
In addition I just noticed that I can't even detect my phone as portable drive, the computer doesn't detect it and the device manager doesn't show any new device when I connect the USD cable to my phone.
I also tried to play with the developer settings and the default USB settings, nothing works.
Charging using cable works, but not fast charging.
Currently I'm using fast wireless charging to charge my phone.
Do you have any idea how to resolve my issue to be able to flash stock rom?