Related
I've been using my Exec for little over a month now, no scratch on the casing nor screen, but I just noticed the tampo print on the side camera and backlight buttons are rubbing off.. No biggie but I'm a bit anal about these stuffs. How is your Universal holding up so far?
As far as the front camera (the one for video calls) is concerned it is okay because my screen protector came with two small round pieces to cover this camera as well as the lense of the main camera.
Yes the print on the backlight button is almost gone after about 1 months of usage. I also find that some marks (about 10 at the moment) developing on the screen side of the cover. This I believe are being formed as the top of the keys rub against the screen side of the cover when it is closed. Rest of the finish I find is pretty good till now with no abnormal wear of the pait work or anything else.
Kind Regards
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
I think all it does is turn the monitor light back on if it's off.. same thing as if you just tab on the screen
joebongo said:
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
Click to expand...
Click to collapse
You have 3 Universals! WOW!
If I am not mistaken, he probably remapped the backlight button to lauch an application. Here is how:
http://forum.xda-developers.com/viewtopic.php?t=34377
yeah, one jasjar with vodafone - rip off data charges and they just wouldn't let me sign up for decently priced data chunks, and it had a dodgy screen, and 2 mda pro's - the first kept crashing so got sent a proper new replacement which is good so far.
keyboard marks on jasjar
hi everybody. i want to use my jas jar with the screen side outwards.. what happens is that i notice the keys of the keyboard tubbing against the metal portion of the cover (the outside) when i turn the screen outwards. will they cause marks on the surface.?
Keys are made of rubber like material so it is very unlikely that it will cause scratch marks. I have a Piel Frama case which has a film like material covering the keys. Thats the best solution if scratching the device is your main fear
hi
using mine in laptop mode ever since i got it in mid oct, no scartches on screen and none of the buttons lost markings and except for two marks on side of screen because of the two elevated rubber protectors, no other scatch or mark any where else on the body.
I dont use any screen portector or any case but always make sure that i dont have anything else in my pocket except Exec like keys etc
hi .. sadly there are no o2 exec or imate jasjar cases availabe here in india. if anybody knows please let me know .. thanks
You can purchase them online from Piel Frama or Brando or PDAir or Proporta....
The pivot worked loose, but there a thread on how to fix it.
Going to try later this week.
bougt it in october, not really been using it but every thing is still ok. It needs resetting very 2 days coz it crashes. it cashes mainly in contacts list and other time during the change over from landscape to portrait.
never had a pda before.
does this happen much to others?
I am an ex Blue Angel owner, and i have had the Wizard for about 7 months now, and the phone is perfect (size, battery, keyboard), however there is one problem that has been bugging me.
I use the standard case, as i like the format. however when i recieve a phone call and i remove it from the case, the screen 8 times out of 10 turns to landscape then back to portrait, and this prevents me answering the phone for 30 seconds or so until the screen turns back, as the hardware buttons dont respond. However i never figured what cused this, until i read through an unrelated post that it was caused my the magnets in the case. and testing this by waving the case over the surface of the phone reproduces this problem.
now i am stunned that they bundled this case with the phone, and i am in the market of looking for another without the magnets i.e snap button.
does anyone know of an an alternative case that is horizontal that has the same belt clip?
i have seen the Krussel Horizontal Case http://www.addonsworld.co.uk/product.php/21636/3384/, but i dont like the detachable belt clip. as i envisage the phone coming off it unlike a vertical case that has gravity and a low pivot point keeping it steady.
has anyone got any suggestions?
I've got the same probleme with my qtek 9100.
Hi Fuzzy [EDIT: and Alex],
some weeks ago I did a search for HTC Wizard on Froogle, and I found a lot of accessories: aluminium hard-cases, new styluses, loudspeaker mountings, modfied desktop stands...
Case-specific search:
http://froogle.google.com/froogle?q=htc+wizard+case&btnG=Search+Froogle
I am sure there is a case that fits your needs.
Greetz
Raubi
unfortunately i have looked through all the 8 pages of hits and there is not a case that is suitable. the nearest to what i want is a case made by sena http://www.senacases.com/cart/home.php?cat=413 however it itself has a magnetic clasp, so will most likely result in the same problem
I want a case like the original with same type of belt clip and without a magnetic clasp. Does anyone have or use such a case, or can confirm that the sena cases arent afflicted with the same problem.
Turn your phone over!!!
When you put the phone in the OEM case, have the screen facing your body (away from the magnetic clasp). This will accomplish 2 things:
1. Prevents the magnet from activating Landscape Mode.
2. Provide extra protection from direct impact for your screen.
I have always done this and never experienced the Landscape issue.
For me that doesnt work, infact it makes it worse i've just removed the phone like that from the case a few times and it change orientation every time. the magnet is contained in the flap and it triggers the screen change every time weather it brishes past the back or the front of the phone.
I have just bought the Krussell case from my first post after not succeeding finding an alternative, i think that with a belt clip it will be unsafe and will stick out much further than the original case, however it does have loops to loop belts through, so that may be the tradeoff i need.
I will let you know how i get on when i recieve the case next week.
what i am most surprised at is either HTC or the mobile carriers not picking up on the problem and selecting a different case.
but the one thing i have figured is that if the magnet is contained purely on the pouch and not the flap (i.e. the flap has metal in it) then this problem would not happen. and if i twisted the phone away from the case when removing it... and ...and ...and..... there would probably be lots of ways to get around it not happening, but in the real world in everyday use when i remove the phone it does happen and it causes me to miss lots of phone calls...
Hi All,
I have updated to the latest AKU3 ROMs and also a few months ago I replaced the housing...However, I've noticed that the screen does not automatically rotate when the screen is swivelled??
Now is this because I did something during re-assembly of the housing OR is there something in the ROM's that disables the hardware somehow??
Cheers
ODY
Unlikely to be the rom, since it's part of the system HTC provided.
If it's been disassembled it's more likely that.
V
vijay555 said:
Unlikely to be the rom, since it's part of the system HTC provided.
If it's been disassembled it's more likely that.
V
Click to expand...
Click to collapse
hey VJ, sorry to bother but do you know what jumper/cable/connector/switch to jump/disconnect/tape inside the Universal to keep it from switching?
I'm sure I saw someone mention that the screen rotation is done by a magnet and switch? It's possible that maybe a small magnet fell out during disassembly? But I have looked throught the Universal repair manual and I can't find any reference to such a magnet??
I'd be nice to know exactly where it is so one would be able to take it out, if it were easy. I don't know if I wanna disasemble mine yet...
EDIT found it!! If you use a very, very light metal chain, as I did, with a keyring @ end, you can hover it around the Universal and see the tension of the chain when it's near the magnet. the keyring sticks too!
it's on the lid, behind the video-call video camera. I'm going to check the lid part of the manual.
Well taking the screen section apart is easy! You don't have to disassemble the whole unit. Looks like my magnet fell out then! Trouble is I want to sell mine so I'll just have to declare the auto screen rotate doesn't work (I've made sure that there is the rotate screen icon on the task bar though!!)
Cheers
Ody
odyseus said:
Well taking the screen section apart is easy! You don't have to disassemble the whole unit. Looks like my magnet fell out then! Trouble is I want to sell mine so I'll just have to declare the auto screen rotate doesn't work (I've made sure that there is the rotate screen icon on the task bar though!!)
Cheers
Ody
Click to expand...
Click to collapse
it works!! I tested it with the very small and highly magnetic point in the bezel of my tablet PC (to hold the pen) and it did change orientation.
thing is that it seems to be stuck beside the sound-holes (when the unit is closed).
I wonder how could I disassemble the lid only? are none of those screws @ the bottom connected to the back part of the lid? if so, that would be awesome!
Hi, on the xda's ftp, you'll find the maintenance manual for Universal...may help you to disassemble yours
thanx for the link!
however, it seems rather risky to try to pry the bezel open while still on the unit. Anyways I'm doing it right know. I'll get back to you.
I did pry it out and took the magnet off... painless(*) procedure and flea-sized magnet! don't loose!
I took a couple of pictures detailing the magnet position and the lid disassembled while still on the unit.
if you want to do this procedure do not loose the tiny screws and...
(*) be careful with the outer speaker (the one that lets you hear a call while the screen is facing the keyboard when closed), it isn't hard wired, it's just two small and fine contacts that might get distorted when putting the lid cover back... I had to take mine out again to correct this problem.
also, be careful with the screw driver and digitizer, as you'll be working in very akward positions to avoid disassembling the whole unit, and take off the battery of course.
Thanks for the photos - looks like my magnet feel out so I bought some 1/8 inch square magnets from ebay. It took a couple to find the sweet spot where the screen rotated but at least it works fibe now!
Cheers
Ody
odyseus said:
Thanks for the photos - looks like my magnet feel out so I bought some 1/8 inch square magnets from ebay. It took a couple to find the sweet spot where the screen rotated but at least it works fibe now!
Cheers
Ody
Click to expand...
Click to collapse
no problem. I'm also going to put the magnet back, now the unit doesn't now when it's closed, and therefore the outer speaker does not work. the screen also does not turn off when closed, only when the system timer tells it too... oh well.
you can turn the screen off by pressing the power button briefly.
no ext speaker though! maybe there's a way in software to disable just the rotation; i think the guys trying to get linux comfortable on the universal have some experience with it, maybe they can help.
I've had an issue with my Wizard since the day I bought it. Every so often if I remove my Wizard from its pouch on my belt and switch it on out of standy by, the screen is in landscape mode and then only after 1 or 2 seconds returns to the normal upright position. Now at first I thought that as I remove it from the pouch, perhaps I open the slide slightly and then push it back as I get it into position in my hand...not the case however...
Then I started thinking, How does the Wizard know that the slide is being opened? I checked the Service Manual and there is no physical switch (at least not that I can see) so perhaps it is done with Magnitism or Induction on the upper part and lower part of the slide.
Only then I got to the conclusion that my pouch has got two magnets that keeps it closed (original pouch that came with my device..Qtek 9100) perhaps as I move the Wizard out of the pouch the magnets interfere with the Wizard's slide-open-closed magnetic "switch"....?
Has anyone got the same problem? It does not bother me all that much I would just like to know if I am all alone and/or am I going crazy?
Tip-Ex said:
I've had an issue with my Wizard since the day I bought it. Every so often if I remove my Wizard from its pouch on my belt and switch it on out of standy by, the screen is in landscape mode and then only after 1 or 2 seconds returns to the normal upright position. Now at first I thought that as I remove it from the pouch, perhaps I open the slide slightly and then push it back as I get it into position in my hand...not the case however...
Then I started thinking, How does the Wizard know that the slide is being opened? I checked the Service Manual and there is no physical switch (at least not that I can see) so perhaps it is done with Magnitism or Induction on the upper part and lower part of the slide.
Only then I got to the conclusion that my pouch has got two magnets that keeps it closed (original pouch that came with my device..Qtek 9100) perhaps as I move the Wizard out of the pouch the magnets interfere with the Wizard's slide-open-closed magnetic "switch"....?
Has anyone got the same problem? It does not bother me all that much I would just like to know if I am all alone and/or am I going crazy?
Click to expand...
Click to collapse
This is due to the pouch having a magnet in it, that makes the PPc think that you have pulled out the keyboard, as the phone as a small magnet so it knows when to change and when not to!!!
That is what i thought... thanx for confirming this..
Hey all,
My Tilt is on the way from AT&T, and I'm looking at cases. The cases that seem to interest me all use magnetic studs. Some have said the magnetic studs can keep the Tilt turned on.
The 2 I like the most are the following:
PDair Book Type
ebay "Premium" Kaiser Case
Anyone had any experience with these or other similar cases with magnetic studs in a similar spot causing problems?
Thanks!
Dont want to hijack your thread but since your on the topic of that case anyone try "PDair Book Type"? Is it still possible to press the keys with the plastic over it?... It doesn't look like it, i seems like you would be pressing more than one button at a time with that plastic over the keyboard.
jinnosuke said:
Dont want to hijack your thread but since your on the topic of that case anyone try "PDair Book Type"? Is it still possible to press the keys with the plastic over it?... It doesn't look like it, i seems like you would be pressing more than one button at a time with that plastic over the keyboard.
Click to expand...
Click to collapse
I think you'll be able to press the keys, but it wont be as good as without the case. As you said, you'll prolly press several buttons at onces and wont get the same feel when typing.
I've used a Prestige case with magnetic closure for a year or more with my AT&T 8525. Never noticed a problem. I'm now using the case with my Tilt, but that's only been a few days. Haven't noticed anything yet, however.
I'm using the PDAir flip case -- the magnetic stud doesn't affect anything. The plastic keyboard cover isn't too bad -- I haven't noticed any problems with multiple keypresses, but it does affect the feel of the keyboard.
I'm looking forward to the Piel Frama case, which should be coming out in the next few weeks. They had a really good case for my old Wizard that used a narrow leather strap & snap to hold the device in the case; you'd unsnap the strap to access the keyboard.
Depends on the magnet strength and location, there have been a few reports of the magnet turning on the phone. The kaiser keyboard uses a magnetic sensor to turn on the phone when the keyboard opens. I'm using a hip holster with mag and not seeing any issue.
I'd say should anyone have the issue, start a thread with brand/model listed for others to avoid.
I have the Seidio case I originally bought for my 8525.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=394
The two magnets would always "trick" the screen into thinking the keyboard was open and switch it to landscape mode. I always had to wait a few seconds for the screen to switch back when I took it out of the case.
This does NOT happen with the Tilt. The screen stays in portrait mode. I have always liked the quality of the case and the magnets in the flap make it easy to open and shut. So now it is my perfect solution.
no issues here
YodaJM said:
Hey all,
My Tilt is on the way from AT&T, and I'm looking at cases. The cases that seem to interest me all use magnetic studs. Some have said the magnetic studs can keep the Tilt turned on.
The 2 I like the most are the following:
PDair Book Type
ebay "Premium" Kaiser Case
Anyone had any experience with these or other similar cases with magnetic studs in a similar spot causing problems?
Thanks!
Click to expand...
Click to collapse
I have been using a case with two magnetic studs on the flip closure for months now and have had zero issues. Bought mine at Fred Meyers and recomend anyone in need of a good black leather horizontal pouch case to check it out. was 15 dollars and is of the same quality and fit as 40 dollar cases you may see online.
cheers
I've been using a Motorola Case designed for the Q9 with my Tilt and it's worked out quite well. It also has a single magnetic stud closure and I have noticed no issues at all.
I bought the PDair Book Type case same week the Tilt first came out here in the U.S. I have had no problems at all. Non of that shutting off by itself thingy people complain about.
Magnetic cases
Some cases cause screen to wake up, some don't. To eliminate the problem just turn off Slide Wake option in registry. When slide wake is enabled opening the keyboard (or getting too close to a magnet) will wake the screen. Turn this option off and you can use magnetic clasps at will.