cinch video driver? - Android Head-Units

Hello guys,
I have updated the Firmware & the MCU of my Joyx Head Unit. After the Update my Reverse Camera is not working & it shows up: no signal Available. the correct video type is already selected. the camera works fine on another car and the cable works as well. so it must be a problem with the software. can it be that i have to install a driver? if so, which and where can I get this driver, or could it be something else? unfortunately the support couldn't help me.
Sorry for my Bad english.

Related

New Android 7.1.1 PX3 Unit from BonRoad - Any Info or Feedback?

https://www.aliexpress.com/store/pr...32699671881.html?spm=2114.12010612.0.0.KbDCzA
The UI and other specs are very similar to the HotAudio test preview (thread here). Has anyone had a chance to get their hands on one of these yet? I'm deciding between this or a Joying unit.
Any input is appreciated!
PX3 RK3188 Android 7.1.1 DVD VW GPS 2G ram
Just received and installed this Head unit in my vw touran 2004.
It looks like the specifications are the same : https://fr.aliexpress.com/item/Pure...32582906631.html?spm=2114.13010608.0.0.UFTkAD
The unit is a Bonroad C1120801A4/A5 (RK3188 Android 7.1.1 Lecteur DVD de Voiture pour Octavia Fabia Praktik EOS GPS Navigation Avec 1024*600 HD 8 "
So far, i'm satisfied with the unit :
- Radio is now working and stable .RDS works fine (with the last DCMU update). (You need to put a double fakkra antenna plug to get the radio stable on vw cars)
- GPS IGo is fine but not in French, Waze great
- canbus is functional
- Wifi rear camera ok
- BT external micro (mono) installed, i need to shout/YELL (it is an issue...)
When calling, both mic works (front mic and ext. roof mic)
google voice research unusable
I'm waiting for documentation from the supplier as there were no instructions in the box.
Do not hesitate, if you need more informations, pictures and tests. :good:
I tried Kingo root but it failed.
I also bought a car radio on aliexpress similar to yours. Px3 cortex a9 for ford focus c-max.
I have exactly the same worries as you with the microphone, the one integrated in the facade I have to stick my mouth on and scream.
The one who plugs externally is the same thing.
Many people talk about a worry with frequencies that are not the same in china and here
300-3400 for china
50-7400 for others
If you can root your device you can change the frequencies with Pimp my rom.
Personally I can not root it.
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
wankun said:
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
Click to expand...
Click to collapse
About 15 to 20 seconds to boot. For sleep functions, I have nightlight or 15s 30s 1mns ect ...
I've the same unit but it doesn't detect OBDII adapter. Any solution?
After trying everything to get the microphone that works for the handsfree kit, I decided to cut the 4th leg of the bluetooth module and solder a mono microphone directly on it. This was my last option because I did not have the c32 connector. This has been a success. People hear me very well now.
I have ordered this one - https://www.aliexpress.com/item/4-C...32691433062.html?spm=a2g0s.9042311.0.0.MbBrvn. Waiting for the the item to arrive. The seller would ship it on 17 July 2017 (Monday).
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
stanley 00 said:
I tried Kingo root but it failed.
Click to expand...
Click to collapse
Can you try the following and see if this gives you root access:
Goto factory settings and instead of typing 126 type *#hct#root#
This may give you temporary root access. Now you can install supersu or magisk to make the root permanent.
Note: I don't have this device or have not used any other Android HU; so I have not tried the steps mentioned above. I found this on the internet. Please try and let us know the result.
Cheers,
Rahul U S
Is your Bluetooth scanning OBDII with this ROM ?
S.Rahus
i tried your password to root but it does not work
" Goto factory settings and instead of typing 126 type *#hct#root# "
Stan
Anyone managed to fix the bad Bluetooth call quality? Any luck with getting root access?
Cheers,
Rahul U S
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Forsaken2703 said:
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Click to expand...
Click to collapse
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Thanks in advance!
Cheers,
Rahul U S
s.rahus said:
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Click to expand...
Click to collapse
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
corolla E12 2din model
I have problems with the sound by hands free, to my listen very low, my unit is the MTCD_XRC_V2.54a_1 with android 7.1.2 ... is there any possibility to get down to version 5 of android?
Forsaken2703 said:
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
Click to expand...
Click to collapse
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
[email protected] said:
Is your Bluetooth scanning OBDII with this ROM ?
Click to expand...
Click to collapse
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Try the latest XRC version 2.54. Please find the attachment.
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Well you're right, if I have the auto sleep option enabled, but programs like Radardroid can not start automatically with the radio, I always have to start them manually.
Hi everyone!
I have a similar unit.
I think that the problem is with android version. In our case 7.1.1.
I had a problem with my OBDII reader and I updated my unit to 7.1.2 and fix it
Now with 7.1.2 I have the same problem with microphone and also I have a problem with USB cameras. Only the DVR app can connect with but only the first time. If I close the DVR app and open it again, camera dont work.
I want to use the USB front camera with Mapillary and iOnRoad but I cant.
Any idea?
Where can I donwload a previos android version? for example 5.1.1 or 6 perhaps its would fix the problems.
Thanks!
I've had a Hizpo 7" no dvd with buttons mcu xrc 2.54 android 7.1.2 2gb 16gb for a week. Came this way so I can't say about previous versions.
My bluetooth microphones (both) work fine for me, calls hear me fine. Even just the internal mic seems good.
I haven't had any bluetooth connection problems.
Android does not see any microphone, there is no speech input in keyboard settings, google voice search hears nothing. Voice recorder apps hear nothing.
Tried a usb mic but that did nothing.
Can't get usb camera to work for DVR. RCA CVI cam works in DVR but doesn't record, does not work in FCAM app however, though rear does.
OBDII worked fine when I first tried it, haven't messed with it since.
Display clear and good.
Haven't seen any bog, even when running nav, audio, video etc.
Audio is so so, lots of noise. Radio reception seems great and RDS works too. Needs an amp.
Wifi reception is great, just a little antenna on the back.
I really like it but for the lack of voice search. It's really fast, I have a load of apps and still tons of space. Runs everything so far.
Nearly instant on, radio is playing in under 2 sec (probably 1).
GPS works good so far, finds my location in maybe 10 sec or less usually. I haven't been thru Pittsburgh yet to say how well it keep its signal.
I just got MTCtools and dialer and will start messing with them tomorrow, hopefully I can get a mic input to android and get voice working, then this will be really great!

Eonon GA8198 - Noobie Questions

Hi guys - I recently installed one of these into a Mazda 6. (px3/7.1.2/Arm Cortex Quad) My first toe dip into the Android Headunit space.
Couple of outstanding questions:
[1) I previously had a Sony Bluetooth module plugged into the aux in port. The A2DP on this unit sounds terrible by comparison. (CD Player sounds great) The Sony seems to support a HD codec. Are the codecs in the hardware/firmware for the BT module in these units? Specifically:
a) Is it possible to install more advanced codecs such as AptX HD via a software update/install?
b) Is it possible to connect a better quality BT USB dongle and use that with the on-board BT disabled?
2) I would really like to be able to use Android Auto. I have installed Head Unit Reloaded, and I can get this going with Wifi Direct, but if I plug my Pixel 2 XL into the USB ports, all it will do is charge. I have checked with Emil, and he seems to think this is not the expected behaviour. Eonon support say that is all that is supported. Dashcam etc works OK.
a) I assume ports on these types of head units are USB OTG? (Is that how it works?)
b) Maybe ScreenCast or something is taking the defaults for phone connect. I've been through every app on there I can find. Any other hints?
c) Has anyone had Headunit Reloaded working on an Aonon unit with the USB cable?
d) Is one of these Car Play/Android Auto USB dongles likely to work if I buy one?
3) What are people doing with multiple drivers of the same car? Setting multiple Android/Google profiles and switching between them somehow? Or making an generic Google account for your car?
4) I'm noticing some dashboard lights flashing briefly on the dash (Traction Control) etc when the ignition is on. Need to pull it apart and disconnect the stereo to see if it is causing this. Has anyone else experienced it? (Eonon sent me a firmware update to fix this, but it is just the same)
Any help appreciated! Or to just know if anyone else is using one of these.
Update for #2. I flashed the latest firmware Eonon gave me, and (that caused a few Wifi problems) but now if I disable the EzConnect software they supply Headunit Reloaded works
Zilch said:
Update for #2. I flashed the latest firmware Eonon gave me, and (that caused a few Wifi problems) but now if I disable the EzConnect software they supply Headunit Reloaded works
Click to expand...
Click to collapse
Hello,
I've the same unit. Would you send the new firmware to [email protected]!
Thanks!
This is the link Eonon gave me. Let me know if it doesn't work for you:
https://drive.google.com/file/d/1v7idZTUybrRmofNw2Fmzd1WBv2dv-Qw_/view?usp=sharing
Zilch said:
This is the link Eonon gave me. Let me know if it doesn't work for you:
Click to expand...
Click to collapse
Thanks, downloaded. Will try to install.
Did you recognized new features?
zh71 said:
Thanks, downloaded. Will try to install.
Did you recognized new features?
Click to expand...
Click to collapse
I think it's just bug-fixes. Did you try it? How is your head unit going? Mine has some issues. Are you using Headunit Reloaded?
Zilch said:
I think it's just bug-fixes. Did you try it? How is your head unit going? Mine has some issues. Are you using Headunit Reloaded?
Click to expand...
Click to collapse
I havn't installed, yet.
Tried Hal9k, the newest one.
That works. And rooted.
zh71 said:
I havn't installed, yet.
Tried Hal9k, the newest one.
That works. And rooted.
Click to expand...
Click to collapse
Thanks. I might try that if you recommend it? Do you know if going back to stock is as simple as installing that image I linked?
Can you tell me if you have any issues with yours?
1) I have electrical engine whine noises over the speakers.
2) Some crackle.
2) The top LED display beeps twice every few minutes and flashes "NAVI" up.
3) Running Headunit Reloaded works now, but it randomly disconnects every few minutes or so and I have to unplug/replug. I've read this could be a cable issue that is specific to the Pixel 2 XL.
It's possible I have a cable short or similar behind the unit, but wanted to check with someone else before pulling the dash all apart. Cheers.
Zilch said:
1, 2, ...
Click to expand...
Click to collapse
Are these ones with factory ROM, or with Hal9k?
zh71 said:
Are these ones with factory ROM, or with Hal9k?
Click to expand...
Click to collapse
Factory with the update. Sounds more like a grounding/quality issue though rather than software.

PX5 S32F0 wrong MCU? Please help!

Hi my friends!
I bought a second hand unit, with no sound, only beeps!
Previous owner flashed device with an update, and he got no radio, very low sound on youtube, so he sold it like that!
Can someone help to verify wich unit i have exactly so i can flash proper MCU?
Attached some pics, of MCU currently installed, and also from the motherboard.
Is this a XRC unit?
Thanks in advance!
check if in the advanced settings (password 0000121) you have the right audio output setting (DSP, etc.)
royalhawk2002 said:
check if in the advanced settings (password 0000121) you have the right audio output setting (DSP, etc.)
Click to expand...
Click to collapse
Hi mate.
Yes, i eventually flashed proper MCU, its was 6686 and not 7708.
But i also updated to android 10, and before i had malysk rom in settings i remember that i could choose between 6686 and 7708 driver for radio?
After update to android 10 i dont have that setting to change...and i guess i left it set in 7708.
At the moment everything seems to work, but radio has very low sound, only hear at max volume and very low.
All other apps, youtube, spotify sound works and intended.
Now i would like to downgrade to malysk rom, but dont know if its possible, just to be able to change that, maybe thats a fix for radio?
Any help i apreciate
Thanks
Hello Friend!
One question... I have one
Erisin ES8180E MCU: S32F0_leima
PX5
For about a couple of days the car radio hasn't turned off anymore, do you have any idea what it could be?
Before when I removed the key from the dashboard the radio would turn off now it doesn't happen anymore ...
I would like to try to update the MCU or reinstall the same MCU but I don't know where to get it and the dealer does not answer me ..
Anything you need, photos or information are at your complete disposal
I hope you can help me.
Thanks so much!

Android 11 Head Unit not operating reversing camera app

Hello everyone! Im brand new on here and hoping someone will be able to help me! I have recently got a android 11 head unit which i have installed in my Van but i have no idea of the model! I have a niggling fault with it that im trying to rectify.
I have a reversing camera fitted which worked no problem with my old monitor ( was separate from original head unit). My new one has a dedicated reverse camera AV Line in with a blue cable next to it which i assumed was the switching input for when i select reverse to activate the reversing app which is meant to be installed and another identical looking cable on the same plug which i assumed was the earth. So ive connected it and its not doing anything. I plugged the AV input into another plug idented AV In and i can go to the AV in app and select it and it works but i want it to automatically do it when i select reverse.
Any help with this is much apreciated!
Andy Muff

Android+DAC need help

hi all! I bought a BMW x6 head unit based on android. The description says that 825x_pro 4/64.
I have a problem with connecting the USB DAC Fiio K3, the head unit detects it as headphones, but the sound does not play, but it transmits sound through the UAPP application. The system and other applications do not give any sound. I certainly apologize, I have been looking for a solution for a week now. I am attaching a photo of the head unit. maybe I'm doing something wrong. thank you in advance!
Check Usb Audio Routing in the developer settings. Maybe it's deactivated there.
No is activated
Did you figure this out? Having the same issue.

Categories

Resources