Related
Good Morning,
I have an issue for the expert, I have P8 lite with B575 single sim and I'd like to change it in dual sim.
the question is: Can I flash B574 ROM on my phone which is already running B575 ?
Phone details:
Model nr ALE-L21
Serial. ALE-L21C432B575
EMUI VER. 4.0
OS. ANDROID 6.0
Thanks in advance for your advice.
salahos
salahos said:
Good Morning,
I have an issue for the expert, I have P8 lite with B575 single sim and I'd like to change it in dual sim.
the question is: Can I flash B574 ROM on my phone which is already running B575 ?
Phone details:
Model nr ALE-L21
Serial. ALE-L21C432B575
EMUI VER. 4.0
OS. ANDROID 6.0
Thanks in advance for your advice.
salahos
Click to expand...
Click to collapse
first of all,you need to unlock bootloader,and then flash by fastboot this firmware:
Ale-L21C432B052
https://mega.nz/#!jdFiyJpR!X2fmOZ-ShY-Kx-9lwnSUN16Vo52_aU0i4K1KmdBW64Q
when is done,reboot phone,now flash this firmware by fastboot:
Ale-L21C432B132 http://www.carbontesla.com/2015/09/download-huawei-p8-lite-b132-firmware-dual-sim/ (download and extract,you will find a folder dload,now use huawei update extractor to extract this files:boot,cust,recovery and system)
Now you need to make local update with this firmware
https://mega.nz/#!XAlCSLqQ!EhBUXcrvbt1pluokN4uGZeIs9RsMwKwa6J0g1i8oGjM
At the end your phone will end up with build number Ale-L21C432B170,now open HiCare app from phone,update to last version,and then HiCare app will tale you there is an update to Ale-L21C432B574
fist think you
MY phone will end up with build number BalongC50B311 ,with a singl sim ans no MAj finded :crying:
fix Balong error
salahos said:
fist think you
MY phone will end up with build number BalongC50B311 ,with a singl sim ans no MAj finded :crying:
Click to expand...
Click to collapse
in order to fix Balong error you must flash again those 4 files from Ale-L21C432B132,once is done,reboot your phone,now download this
https://mega.nz/#!uZd0QKzS!pukcVA87ASAagXSfifabHCcOG7hOysQsgvbxnbThl60
extract and rename that folder to dload,putt in to your memory phone and make a local update,once is done check an see if your build number is Ale-L21C432B132,do the same with firmware Ale-L21C432B170 and make local update
think you so much cristi.blidariu it's work perfectly
your the best
Nice to hear that ?
Sent from my ALE-L21 using XDA-Developers mobile app
Hi All,
I have a P8 Lite with vodafone custom firware, build nr.: Ale-l21c02b898 with a single sim card. is the above procedure valid in my case?
h2mm said:
Hi All,
I have a P8 Lite with vodafone custom firware, build nr.: Ale-l21c02b898 with a single sim card. is the above procedure valid in my case?
Click to expand...
Click to collapse
You can give a try it should work
i have Ale-L02 ! Can I also make it dual ? using the same method u mention above ? plz te me
Umer Arsahd said:
i have Ale-L02 ! Can I also make it dual ? using the same method u mention above ? plz te me
Click to expand...
Click to collapse
It should work,give a try
Hi i have PRA-LX1 ! Can I also make it dual ? using the same method u mention above ? Thanka
margiodo said:
Hi i have PRA-LX1 ! Can I also make it dual ? using the same method u mention above ? Thanka
Click to expand...
Click to collapse
Sent from my HUAWEI ALE-L21 using XDA Labs
margiodo said:
Hi i have PRA-LX1 ! Can I also make it dual ? using the same method u mention above ? Thanka
Click to expand...
Click to collapse
You can't use this files,you will brick your phone, please search for PRA-LX1 in XDA forum's
Hi, can someone reupload this ? :
Ale-L21C432B132 http://www.carbontesla.com/2015/09/d...ware-dual-sim/
ALE-L21 C432B132 Europe channel Dual.rar
Thank you.
EDIT: You can use this B132 - http://huawei-firmware.com/rom/huawei-p8-lite/ale-l21/1241
Hi, I am now on B170 with Dual sim enabled, but no OTA update to B574, I tried to install B574 manually via update.zip - local update, but failed. Could someone help me please ? Thank you.
EDIT: Fixed. Need to download full zip , not OTA.
Hi guys
My LON-L29 Huawei Mate 9 PRO is bricked, kinda. I have twrp on it, but no OS. I can also enter fastboot mode.
I will give $50 to the person who can get the phone working again.
Please feel free to ask me ANYTHING you need to know.
Thank you in advance
/CK
To mod: I know this is the Huawei Mate 9 forum, but I'm desperate for some help here.
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
I can help you. Tell me exactly what model you have. LON-L29C432? I need the model information beyond the C.
enzo24754 said:
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
Click to expand...
Click to collapse
Thank you, will try
/CK
duraaraa said:
I can help you. Tell me exactly what model you have. LON-L29C432? I need the model information beyond the C.
Click to expand...
Click to collapse
How can I find out since I can't boot it
/CK
Phone is up and running thanks to @CaptainTiiti who gets the $50 reward.
Thank you xda community for your suggestions!
/CK
Can you share his solution? And how did you install twrp on it? I know mate 9 is somehow supported unofficially but not on mate 9 pro.
enzo24754 said:
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
Click to expand...
Click to collapse
I have M9P : LON-L26C636B139 and I've the same problem like Cafe King. I tried using enzo24754's suggestion, but not success. The screen shows " E: unknown command [errno] , update process ended with error : 7 "
May I ask for your suggestion, thank you very much.
apinun_pora said:
I have M9P : LON-L26C636B139 and I've the same problem like Cafe King. I tried using enzo24754's suggestion, but not success. The screen shows " E: unknown command [errno] , update process ended with error : 7 "
May I ask for your suggestion, thank you very much.
Click to expand...
Click to collapse
Same issue here
i think your only hope is reddit.com/r/Funkyhuawei.
I would like to share my experience how I successfully unbricked my Mate 9 Pro (LON-L29C636).
- My M9P was bricked. I've (Raygrobe) TWRP on it, but no OS.
- I tried every methods to flash the firmware but no luck.
- I downloaded C636 offline firmware (MHA-L26C636B110 firmware from Huawei Mate 9 Guides Forum and flash it from SDCard using 3 buttons method by Dload folder with success. My M9P changed to M9 with MHA model. It worked quite well, not much difference from M9P.
- I tried to rebrand to M9P using firmware for LON-L29C636 neither Dload or Firmware Finder method but no luck. The Firmware Finder struck on "Send to updater" menu.
- Someday later, I tried using "System Update" in settings menu. This time it asked if I want to change the model. After I accepted, it started to flash. Finally my M9P get back from brick stage to LON-L29C636B156.
Edit : Actually, in this case you may bring your M9P to Huawei Customer Service Center and ask them to reset your M9P and install the new firmware with no cost.
Please , my honor is in PLK_L01C185 ..CAN I convert it,s model to Chinese ROM PLK_TL00C01 ???
yes, you can by rebranding your device.
venugopalu007 said:
yes, you can by rebranding your device.
Click to expand...
Click to collapse
i tried it by multi tool of huawei but it fail ...
can y tell me how excactly ,
sorry for bad english
TAREK XDA said:
i tried it by multi tool of huawei but it fail ...
can y tell me how excactly ,
sorry for bad english
Click to expand...
Click to collapse
any screen shots ? of error
It send me this error ,
Something went error ..
I active root permissions in adb mode, my bootloader is unlocked , usb debbug is active but still error
TAREK XDA said:
It send me this error ,
Something went error ..
I active root permissions in adb mode, my bootloader is unlocked , usb debbug is active but still error
Click to expand...
Click to collapse
Check your current state of vendor/country with
Dial *#*#2846579#*#* goto network information then vendor country info
Try it now and send me that .,,
Try it now and it send me ,, vendor country file donot exist ...
Like screenshot below ..
no, you have flash the zip provided by twrp and have to dload the official firmware of rebreanded version
My stock firmware of my honor is PLK _ L01C185 and i wish rebranded it to chinease firmware PLK_TL00C01 , DO you mean i have first flash stock rom plk_l01c185 to solve problem of vendor country and then flash twrp and root then rebrand it to chinease firmware by multi tool or what you mean exactly ??..
I wish you send me step by step to rebrand it ..
I wish goin your facebook account to speak to you easly
TAREK XDA said:
I wish goin your facebook account to speak to you easly
Click to expand...
Click to collapse
I think you have lost the oeminfo, you should check for backup of it ,in multitool _ backup folder if it's there try to restore it. It should not have happened may be oeminfo file for PKL-TLOO which you trying to flash is problem(it is downloaded by multitool ) post the problem in multitool thread @insideout he can get it to
TAREK XDA said:
My stock firmware of my honor is PLK _ L01C185 and i wish rebranded it to chinease firmware PLK_TL00C01 , DO you mean i have first flash stock rom plk_l01c185 to solve problem of vendor country and then flash twrp and root then rebrand it to chinease firmware by multi tool or what you mean exactly ??..
I wish you send me step by step to rebrand it ..
Click to expand...
Click to collapse
download rebrand zip provided my Huaweimultitool and flash using twrp and dload the firmware which is related to rebrand zip version
Where i find this rebrand zip , can u help me more or send me a link to download it ..
Very thanks for you
TAREK XDA said:
Where i find this rebrand zip , can u help me more or send me a link to download it ..
Very thanks for you
Click to expand...
Click to collapse
First download full stock firmware for TL-00C01 whichever version but must be full firmware not ota (should be of size 1.5gb) 2. extract the update.app file from it 3. Paste the file in mutitool/UZC folder. Follow the steps mentioned in post 519 page no 52 of mutitool thread link
https://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176/page52
Multitool will create a zip file will take 10-15min
Dear
Thanx alot , but i ask ...i am on android 5 x emui 3,1 if i wish to debrand it also have to great flashable debrand zip or thas in android 6,x only
TAREK XDA said:
Thanx alot , but i ask ...i am on android 5 x emui 3,1 if i wish to debrand it also have to great flashable debrand zip or thas in android 6,x only
Click to expand...
Click to collapse
IF u r on Android 5x then download the target firmware of 5x extract and put update file in uzc folder follow the instructions to create twrp-flashable zip file on multitool then flash it via twrp then u will be on Android 5x of TL001c after that u can upgrade to 6.0 if u want
Hi,
I have tried all one click root apk (kingroot, kingoroot, iroot, magisk, flamaroot and etc..)
Non of them are successful, so i go for the traditional way of properly rooting p10 lite.
And i stuck at getting the unlock code which huawei official web no longer providing the codes anymore.
Is there any solution or successful cases that i can refer to?
I am unable to unlock the bootloader. I do hope anyone can help me with this.
Thanks in advance and appreciate if anyone could help me rooting p10 lite
Phone: p10 lite
emui : 5.1.1
Android : 7.0
model : WAS-LX2
richbottles said:
Hi,
I have tried all one click root apk (kingroot, kingoroot, iroot, magisk, flamaroot and etc..)
Non of them are successful, so i go for the traditional way of properly rooting p10 lite.
And i stuck at getting the unlock code which huawei official web no longer providing the codes anymore.
Is there any solution or successful cases that i can refer to?
I am unable to unlock the bootloader. I do hope anyone can help me with this.
Thanks in advance and appreciate if anyone could help me rooting p10 lite
Phone: p10 lite
emui : 5.1.1
Android : 7.0
model : WAS-LX2
Click to expand...
Click to collapse
there's a paid method to get the bootloader code:
https://www.dc-unlocker.com/downloads/get/jvObBBIo
you must buy credits to get the feature you want. in your case, you need to buy enough credits to get your bootloader code.
OK
thanks for your info, but i really hope i can root it without paying, will explore your solution in a while though. Appreciate your suggestion.
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Ameeiin said:
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Click to expand...
Click to collapse
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
I have tried to reinstall it to my previous version, but it didn't work.
The model does not have an oem unload option in t
Dadditz said:
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
Click to expand...
Click to collapse
I ha
Dadditz said:
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
Click to expand...
Click to collapse
Tnx bro but I have tried reinstalling my previous version two times, but it didn't work.
In this case, the oem unlock toggle is missing, so please is there any way to unlock the bootloader without it?
Ameeiin said:
the oem unlock toggle is missing
Click to expand...
Click to collapse
Chinese firmware doesn't have oem unlock option, it's normal.
-Alf- said:
Chinese firmware doesn't have oem unlock option, it's normal.
Click to expand...
Click to collapse
So now what will I do please?
Ameeiin said:
So now what will I do please?
Click to expand...
Click to collapse
Look here .
Ameeiin said:
the oem unlock toggle is missing
Click to expand...
Click to collapse
btw, it's an advantage
-Alf- said:
Look here .
btw, it's an advantage
Click to expand...
Click to collapse
Thanks
Can i use my android phone to unlock the bootloader without pc?
Ameeiin said:
Can i use my android phone to unlock the bootloader without pc?
Click to expand...
Click to collapse
No.
At least up to my knowledge, it is impossible to get the code without a PC (more precisely, you can unlock BL without PC only if you have the unlock code).
-Alf- said:
No.
At least up to my knowledge, it is impossible to get the code without a PC (more precisely, you can unlock BL without PC only if you have the unlock code).
Click to expand...
Click to collapse
Ok, So please where can I get the unlock code?
Ameeiin said:
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Click to expand...
Click to collapse
I have an idea, can i flash it with Huawei p9 lite firmware?
Ameeiin said:
I have an idea, can i flash it with Huawei p9 lite firmware?
Click to expand...
Click to collapse
You can try flash it with Service ROM Download . Type VNS-L31, or VNS- .
Download correct firmware - EMUI version, Cxxx (the bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download. Select your previous Cxxx, not current C00 ) and single/dual SIM (all firmwares that end with even numbers are for dual SIM, odd numbers are for single SIM).
Instructions can be found in 'ReleaseDoc' folder.
If you cannot unpack downloaded zip archive on PC, unpack it in the internal memory using this RAR apk.
Extracted 'dload' folder copy/transfer to the SD card. Good luck.
-Alf- said:
You can try flash it with Service ROM Download . Type VNS-L31, or VNS- .
Download correct firmware - EMUI version, Cxxx (the bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download. Select your previous Cxxx, not current C00 ) and single/dual SIM (all firmwares that end with even numbers are for dual SIM, odd numbers are for single SIM).
Instructions can be found in 'ReleaseDoc' folder.
If you cannot unpack downloaded zip archive on PC, unpack it in the internal memory using this RAR apk.
Extracted 'dload' folder copy/transfer to the SD card. Good luck.
Click to expand...
Click to collapse
I forgot the last cxxx of the build number, but the model is l31 for sure, dual sim and comes with Android version 6.0, EMUI 4.1
There's no Service ROM for EMUI 4.1 , you have to flash UPDATE.APP file.
Ameeiin said:
I forgot the last cxxx of the build number
Click to expand...
Click to collapse
where are you from if I may ask?
Just to be sure - on this website you can get info about target country (Country , Valid for..., Supported country...)
-Alf- said:
There's no Service ROM for EMUI 4.1 , you have to flash UPDATE.APP file.
Can you explain to me in detail please?
Click to expand...
Click to collapse
where are you from if I may ask?
Just to be sure - on this website you can get info about target country (Country , Valid for..., Supported country...)
[/QUOTE]
Nigeria
Ameeiin said:
Nigeria
Click to expand...
Click to collapse
I think it's C636 , but I'm not sure.
Any forced flash with wrong region will bring your phone to C900 (global) or will brick your phone.
I can't help you anymore, sorry...
Ok thanks.
I can't help you anymore, sorry...
[/QUOTE]
-Alf- said:
I can't help you anymore, sorry...
Click to expand...
Click to collapse
-Alf- said:
I can't help you anymore, sorry...
Click to expand...
Click to collapse
But why if you doesn't mind.
Ameeiin said:
why
Click to expand...
Click to collapse
if you don't know what your default region is, and without a PC it's just Russian roulette .