Hello.
I installed Kali nethunter on Ticwatch Pro 3 Ultra
But, Unable to install chroot because of space limitation (8GB free spaces needed but, ticwatch has 8GB storage).
Is there any way to install?
additional : I couldn't find "Installing NetHunter On the TicWatch Pro 3" documentation in https://www.kali.org/docs/nethunter/ anymore. Is there any issues nethunter on ticwatch pro 3?
Related
Hy,
I have rooted samsung galaxy s3 neo. I download kali linux img and the other apps that i need but when i launch kali it opens only the terminal and nothing else happens... What can i do and what is the problem ? .... Pls help
Hi guys,
I am trying to install Kali linux on my phone with Linux deploy and it says device doesnt support loop device, which is necessary for Linux installation.
Any idea how to make it support.?
First time posting, but I've read through dozens of threads and have used the site extensively. I cannot seem to find an answer to the issue I'm having. I had an old Galaxy Note 4 lying around and wanted to see if I could install NetHunter. After tons of trial and error, I was successful in flashing LineageOS 15.1, addonsu -15.1 arm, nethunter-generic-armhf-kalifs-full-rolling-2017.10-20171013-0449, and kernel-nethunter-generic-armhf-3.15.4-20170211-0304 (too new to post link of the NH builds). I have full chroot, updated busybox (v1.25-0-NetHunter) and SuperuserSU to manage root privileges. I had to install all of the tools (e.g., cspolit, DriveDroid, OpenVPN, etc.) individually, but they seem to be in working order.
My issue: I bought an external wifi adapter (Alfa AWUS036NEH) with a chipset (Ralink Technology Wifi Adapter RT2780) that supports monitor mode. The Wifi card appears to work flawlessly on my macbook with Kali distro, but I can't seem to find a way for the NH kernel on the Note 4 to recognize the adapter. In the kernel I flashed, I can see the rt2870.bin firmware required in the /system/etc/firmware folder, but for some reason Nethunter does not recognize the adapter. On most Nexus/NH builds, the wifi adapter is found to be compatible and is usually plug and play.
When I run:
-Kali terminal
-ifconfig
There is no wlan1. Only wlan0.
Same thing if I run iwconfig.
When I run:
-kali terminal
-airmon-ng
I receive a prompt that states:
Found phy0 with no interface assigned, would you like to assign one to it [y/n]?
-y
ERROR adding monitor mode interface: command failed: Operation not supported (-95)
No surprise, the above is indicating the embedded chipset does not support a monitor mode interface, but it doesn't even list the external adapter.
when I run: lsusb
Output shows the Ralink wifi adapter on bus 3:2.
I understand NetHunter was not built for LineageOS 15.1, but there has to be some way to maybe push the firmware or modify the firmware (I have the original firmware from the manufacture) to be compatible with my current build? Do I need to compile my own Kernel for this to work properly? Why doesn't the generic NH kernel, with the rt2870.bin file work?
Thanks ahead of time.
Have you tried using Magisk and flashing the Kali Nethunter module with that? It also includes multiple wireless firmware and I believe the correct one for your Alfa dongle. I too just bought that exact WIFI dongle and I'm still in the process of setting up Kali on my Note 4.
I had a similar issue as you on my OnePlus 5T even with the Magisk module for Nethunter. I'm going to try and find a different kernel because I think that's my issue on that phone.
My Note 4 is N910P but I'll let you know if I find something that works and maybe it'll help you find a way on your variant.
I downloaded and installed Kali Nethunter in Samsung Galaxy Note 4 SM-N910C (trelltex, my firmware is Lineage 17.1, I have a kernel (Linux kali 3.10.9+ #1 SMP PREEMPT Tue Jun 29 01:40:50 pdt 2021 armv7l), everything works just fine, but Kali Nethunter does not see my external Wifi adapter Alfa (AWUS036NHA) , chipset (AR9271).I almost tried everything, I could not find the answer, the atheros drivers are installed and the ath9k-htc. Hello, I downloaded and installed Kali Nethunter in Samsung Galaxy Note 4, my firmware is Lineage 17.1, I have a kernel (), everything works just fine, but Kali Nethunter does not see my external Wifi adapter (). I almost tried everything, I could not find the answer, the ateros drivers are installed and there is atn9k .ROOT have, put by the magisk. I connect via OTG, I changed everything the same. Please help me to fight this. Thanks.
I tried to plug my usb into my phone (sm-n910u with lineage 17) but nothing happened
I know that Note 4 have otg function
Hey guys here a howto Install Kali Linux Nethunter on S4 Mini Or Any Device
if works to when anybody have not much space on phone
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war. Please
* do some research if you have any concerns about anything
* before flashing it
perhaps that helps some people
0. install busybox 1.25 (few are not working , then you must take another app from playstore)
1. Build Kernel
2. Flash arm64 or armhf / or your release zip https://www.kali.org/get-kali/#kali-mobile
3 install apk nethunter: https://github.com/atarii/Magisk_Kali_Nethunter/tree/master/files
4. install all needed files like terminal etc
5. kalifs-armhf-nano.tar.xz use from inside the nethunter-2022.2b-generic-armhf-kalifs-nano.zip or youre release .zip
6. put kalifs-armhf-nano.tar.xz to /sdcard/ & /extern/sdcard and rename to kalifs-backup.tar.xz
7. open nethunter - chroot install , choose the right location for folder , and click on minimal and choose sdcard is root
8. install needs ca 5 minutes
9. chroot installed
10. apt-get update && upgrade via terminal , and install all needed tools or choose a bigger install , because wifite will only work with few more installed tools , the commands are not working without update & upgrade
11. Flash builded kali nethunter kernel
11 1/2 finished installed the extern wifi cards under this line should work without any need of [MODULE] Wireless Firmware for Nethunter , i can test it at 8 aug then arrive my wifit adapter RTL8192EU
but currently i cant building a kernel and try to install manually the wifi driver , but currently without success
​Attention: The Extern Wifi Adapter must before you start the phone are plugged in​
12 .The following chipsets are supported by default in most, if not all, NetHunter kernels:
Atheros
ATH9K_HTC (AR9271, AR7010)
ATH10K
Ralink
RT73
RT2800USB
RT3070
Realtek
RTL8188EUS
RTL8188CU
RTL8188RU
RTL8192CU
RTL8192EUhttps://www.ebay.de/itm/373611298529 / Driver is only for install without nethunter kernel because nethunter kernel had it inside / Driver: https://github.com/Mange/rtl8192eu-linux-driver
RTL8723AU
RTL8811AU
RTL8812AU
RTL8814AU
RTL8821AU
RTW88-USB
MediaTek
MT7610U
MT7612U
Qualcomm internal wifi chipsets (wlan0)
QCACLD-2.0
QCACLD-3.0
The following devices are confirmed to be working with a NetHunter build:
TP-Link TL-WN722N v1 (Please note that v2 & v3 have unsupported chipsets) but v2 and v3 may be supported using RTL8812AU drivers.)
TP-Link TL-WN822N v1 - v4
Alfa Networks AWUS036ACH
Alfa Networks AWUS036NEH (recommended by @jcadduono)
Alfa Networks AWUS036NHA
Alfa Networks AWUSO36NH
Panda PAU05 Nano
Edit:1
Small Tipp
Kali
Adapter: Archer T2U Nano | Driver
STEP 1 : Open Terminal Emulator
STEP 2 : Run commands
sudo apt update
sudo apt install realtek-rtl88xxau-dkms
STEP 3 (Optional): Check driver existance
Run commands below:
find /lib/modules/`uname -r`/ -name "88XXau.ko"
There should be a file in search result if driver was successfully installed.
Created 2022-07-29
Last Updated 2022-07-29