Database Users

[GUIDE] Install Xposed without breaking safety net on Nougat.

Note: THIS WILL NOT WORK WITH SYSTEMLESS XPOSED, YOU MUST USE THE CLASSIC VERSION!
Configuration tested on:
Redmi Note 3 Kenzo 3gb goodix variant.
Officially unlocked bootloader.
Installed latest global dev rom (7.7.20) with miflash in edl mode then installed TWRP official 3.1.1-0 then installed 7.7.6 firmware from LineageOS 14.1 thread.
Latest LineageOS build (2/8/17) with Radon Kernel 5.3.
Steps:
1. Install latest global dev rom to make sure you have the proper nougat binary blobs on your device. Preferable to use miflash and phone in edl mode. Allow phone to boot one time so rom can partition the emmc properly.
2. Install latest TWRP official (3.1.1-0) by putting phone in bootloader mode and connecting to PC via usb cable. Copy the twrp recovery image to the same place that fastboot.exe is located. Open an elevated/admin command prompt and navigate to where fastboot.exe is located. Type "fastboot flash recovery NameOfRecovery.img" (without quotes of course). When that is finished type "fastboot boot NameOfRecovery.img."
3. Install zips in this order. LineageOS rom, OpenGapps, Radon Kernel 5.3 (selected all default settings), Magisk 13.3.
4. Reboot to system, set up phone and install any apps that need to pass cts safety net at this point. E.G. Super Mario Run.
5. Reboot to recovery.
6. Install the latest Xposed build for SDK25 ARM64 from PurifyOS Xposed thread - https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221. DO NOT USE THE SYSTEMLESS MAGISK VERSION.
7. Reboot to system.
8. Install latest Xposed Material installer by DVDAndroid - https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758. At this point you will fail safety net. The next step will fix that.
9. Install Root Switch 1.3.3.2 apk.
10. When you need to pass CTS Safety Net use Root Switch to disable Xposed. It will ask you confirmation to perform a soft reboot. After the soft reboot Xposed will be disabled and you will be able to pass CTS Safety net again. DO NOT USE THE DISABLE ROOT SWITCH! THIS WILL PERMANENTLY MESS UP MAGISK!
THIS HAS ONLY BEEN TESTED ON THE LISTED CONFIGURATION. DO NOT ASK IF IT WORKS ON ANY OTHER CONFIGURATION, TEST IT YOURSELF. I WILL NOT BE RESPONDING TO QUERIES, IF YOU FOLLOW THE STEPS AS LISTED YOU WILL BE JUST FINE.

Linn for root switch

tried this on rr rom redmi note 3 kenzo working absolutely fine highly recommend

Works on One Plus 3T with Oxygen OS 4.1.6!
Thanks!

If the root switch app disables xposed, then what is the use of it

[GUIDE] ARISE magnum OPUS on magisk android 8.0

If you break, blow up, brick, or neutralize your device in any way, shape, or form, I am not responsible for the damage
Install ARISE Magnum OPUS on android 8.0 with Magisk​
Hi XDA, I have recently put a thread online about installing ARISE deuternomy on magisk. I have installed magnum OPUS on magisk and it is relatively easy! So here it is
Prerequisites:
This zip file contains all of the resources you'll need
In case you are curious what is inside the zip
Magisk v14.2(14.3 does not work due to incompatibility)
ARISE magnum OPUS zip (latest)
ARISE magisk module by zackptg5 and shadowghoster
Magisk permissive script
CHDLOC stereo mod (if you want it)
Steps:
Root using Magisk, follow Homeboy76's guide. Post #9
Extract the zip file you downloaded
Open Magisk manager and install the following modules...
Busybox for android NDK (found in download section)
Universal deep buffer remover (also found in download section)
SE linux permissive module (in zip file)
Reboot (if it does not boot properly, hold vol down and power and reboot, it works 2nd time)
Customize ARISE customize.prop (here is a video on how to do this)
Reboot to TWRP recovery
mount system, data, vendor from mount menu
Flash Magnum OPUS zip
Flash ARISE magisk module
Reboot
DONE!!! Enjoy your new sound experience!
tip: if you want to install the stereo speakers mod by chdloc, here is the link...
I would like to thank the ARISE team, zackptg5, shadowghoster, TopJohnWu, osm0sis, ahiron, and Jman420 for making this possible!

Hi brother
I am very interested in your guide for arise magnum opus on rom oreo.
on rom nougat I've always been successful using supersu.
in step 1: do you need to install magisk root using the zip you posted?
from twrp initially?

cuciu70 said:
Hi brother
I am very interested in your guide for arise magnum opus on rom oreo.
on rom nougat I've always been successful using supersu.
in step 1: do you need to install magisk root using the zip you posted?
from twrp initially?
Click to expand...
Click to collapse
Not anymore, the recent update made it so that magisk v 14.3+ works.

I apologize for my bad english, I use google translator. I've always used supersu, magisk I know him very little. anyway: do you need to install the new magisk 14.3 from twrp to root the phone? I have a redmi note 4 snapdragon 625 with bootloader unlocked. I'm trying various ROM hours or on this phone. I do not understand the steps of your guide.

Has anyone tried this on 8.1 DP2?

airmaxx23 said:
Has anyone tried this on 8.1 DP2?
Click to expand...
Click to collapse
Until now found no way to make it work on dp2. Still looking for a solution. Maybe we have to wait for official sources from 8.1.

The permissive module fails to install for me.

dirac control service has stopped. :\

Does this work for 8.1.0 also?

universal deep buffer remover was gone for now, is that ok?

Root, Install TWRP & Xposed Framework

After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.

hmm
Mirza_Husnain said:
After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
Click to expand...
Click to collapse
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me

zagget said:
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
Click to expand...
Click to collapse
Really sad that it doesn't work for you.
Try this:
Install ROM from zero, (or wipe it off). Then try to install the magisk 18.2.
Hopefully it'll work for you.

Thanks
I will look at it
But is stupid that i need to install the rom from start
And where is Magisk 18.2 comming from
The last one on the official page is 18.1
So how do you get the Magisk 18.2

Any way to run xposed on OOS 11 ?

Hello,
I have a OnePlus 8 Pro with OOS 11 and root with magisk.
Is there a way to have xposed (via edxposed or taichi) please ?
All my attempts ended in a boot loop :-/
Thanks

yes, I tried this method:
1. install riru core from magisk
2. download edxposed manager from github
3. reboot
4. go to edxposed manager, switch to canary tab and install canary version
5. reboot

I followed these steps and it didn't work for me.
I'm on In OS 11.0.1.1.IN11AA with xposed v0.5.0.6-android_r(4565) and following these steps gives me EdXposed framework is installed, but not active please check logs
Log says:
E EdXposed-Bridge: Cannot lod any modules because /data/user_de/0/org.meowcat.edxposed.manager/conf/modules.list was not found
davie9x said:
yes, I tried this method:
1. install riru core from magisk
2. download edxposed manager from github
3. reboot
4. go to edxposed manager, switch to canary tab and install canary version
5. reboot
Click to expand...
Click to collapse

Viper4android not working on version of OxygenOS 12 (OB1)? 🤔

Hello Everyone.
The first beta version of OxygenOS 12 was released, and as usual I ventured to install V4A, unfortunately I was not successful.
I tried several ways to make it work. I believe that I'm not getting it because of the Dolby Atmos that already comes in the Rom system. If anyone has a solution for this it will be of great help. thank you for the attention.

[GUIDE] Viper4Android Driver Installation Error Fixed on A11/12/12.1 AOSP/OOS/COS ROMs
1. Method 2. Method Use Latest Unofficial Magisk Delta (if only 3. method didn't work.) and continue with 3. Step. 3. Method Found this thread. First install V4A apk, let it install the module and reboot once and then, basically copy these...
forum.xda-developers.com