After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
hmm
Mirza_Husnain said:
After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
Click to expand...
Click to collapse
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
zagget said:
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
Click to expand...
Click to collapse
Really sad that it doesn't work for you.
Try this:
Install ROM from zero, (or wipe it off). Then try to install the magisk 18.2.
Hopefully it'll work for you.
Thanks
I will look at it
But is stupid that i need to install the rom from start
And where is Magisk 18.2 comming from
The last one on the official page is 18.1
So how do you get the Magisk 18.2
Related
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Note: THIS WILL NOT WORK WITH SYSTEMLESS XPOSED, YOU MUST USE THE CLASSIC VERSION!
Configuration tested on:
Redmi Note 3 Kenzo 3gb goodix variant.
Officially unlocked bootloader.
Installed latest global dev rom (7.7.20) with miflash in edl mode then installed TWRP official 3.1.1-0 then installed 7.7.6 firmware from LineageOS 14.1 thread.
Latest LineageOS build (2/8/17) with Radon Kernel 5.3.
Steps:
1. Install latest global dev rom to make sure you have the proper nougat binary blobs on your device. Preferable to use miflash and phone in edl mode. Allow phone to boot one time so rom can partition the emmc properly.
2. Install latest TWRP official (3.1.1-0) by putting phone in bootloader mode and connecting to PC via usb cable. Copy the twrp recovery image to the same place that fastboot.exe is located. Open an elevated/admin command prompt and navigate to where fastboot.exe is located. Type "fastboot flash recovery NameOfRecovery.img" (without quotes of course). When that is finished type "fastboot boot NameOfRecovery.img."
3. Install zips in this order. LineageOS rom, OpenGapps, Radon Kernel 5.3 (selected all default settings), Magisk 13.3.
4. Reboot to system, set up phone and install any apps that need to pass cts safety net at this point. E.G. Super Mario Run.
5. Reboot to recovery.
6. Install the latest Xposed build for SDK25 ARM64 from PurifyOS Xposed thread - https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221. DO NOT USE THE SYSTEMLESS MAGISK VERSION.
7. Reboot to system.
8. Install latest Xposed Material installer by DVDAndroid - https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758. At this point you will fail safety net. The next step will fix that.
9. Install Root Switch 1.3.3.2 apk.
10. When you need to pass CTS Safety Net use Root Switch to disable Xposed. It will ask you confirmation to perform a soft reboot. After the soft reboot Xposed will be disabled and you will be able to pass CTS Safety net again. DO NOT USE THE DISABLE ROOT SWITCH! THIS WILL PERMANENTLY MESS UP MAGISK!
THIS HAS ONLY BEEN TESTED ON THE LISTED CONFIGURATION. DO NOT ASK IF IT WORKS ON ANY OTHER CONFIGURATION, TEST IT YOURSELF. I WILL NOT BE RESPONDING TO QUERIES, IF YOU FOLLOW THE STEPS AS LISTED YOU WILL BE JUST FINE.
Linn for root switch
tried this on rr rom redmi note 3 kenzo working absolutely fine highly recommend
Works on One Plus 3T with Oxygen OS 4.1.6!
Thanks!
If the root switch app disables xposed, then what is the use of it
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install FUSION KERNEL from link below ( one of the fastest kernels I have ever seen)
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
FUSION KERNEL with permissive mode
https://www.leorom.cc/index.php/fusion.html?t=1553420049699
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Does anyone tryed it?
Will try tomorrow!
Thanks!
Just followed your steps and my phone is rooted now!
keunhuvac said:
Just followed your steps and my phone is rooted now!
Click to expand...
Click to collapse
Excellent !
Btw, i use viper module in magisk manager and it works fine!
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Same here, works fine with Magisk Module ?
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Thank you for that info. I didn't tryed module rather then install standalone app. Anyway, good to work on both ways.
tin2404 said:
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install RZ KERNEL PIE from here
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
RZ KERNEL with permissive mode
https://forum.xda-developers.com/ga...t/kernel-rz-kernel-samsung-galaxy-s8-t3893139
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Click to expand...
Click to collapse
what about OEM unlock, I must turn on??
jackherer72 said:
what about OEM unlock, I must turn on??
Click to expand...
Click to collapse
https://forum.xda-developers.com/sitesearch.php?q=oem unlock
Hello, you have solution for root samsung s8 + g9550zhu4dSg2 ?
Hi everyone,
Sorry for my language : i don't speak english very well.
I'm a new user of this forum.
I'm a new user of root, rom, ...
And I need help for hack Pokemon Go on my Nexus 4.
I found this project : "Pokemon Go MITM" on GitHub by rastapasta (sorry I can't put a link)
And I would like to try it.
I tried several things but I have trouble at all step and I don't understand that I do.
To use MITM, I think I need :
root my phone
Install the Xposed Framework
install Pokemon Go Trust Certificate via the Xposed Installer
install the Xposed module pokemon-go-xposed
To use Pokemon Go on rooted phone, I think I need to hide the root :
Install Magisk Manager
Install TWRP
Install Magisk
I think my phone is rooted now. I have the SuperSu app and Pokemon Go said something like that : "Phone or OS not compatible with Pokemon Go".
I don't know what it's finish with the Xposed Framework.
I had install Magisk Manager but now I have trouble to use TWRP and install Magisk.
First, can you confirm that my lists of things to do are correct?
And after, someone can help me step by step and explain me what each step do?
I think, the first thing to do is to be able to launch Pokemon Go on rooted phone.
So Install TWRP and Magisk.
Correct?
TWRP + Magisk
I continued to try by myself.
After install TWRP by the TWRP App, I don't understood that we need to reboot in recovery mode to launch TWRP.
So In TWRP, I install Magisk from the zip downloaded previously by the Magisk Manager App.
So now, I have TWRP and Magisk installed.
Next step : use it to hide root to Pokemon Go App.
But I don't know how to do it yet!
Magisk Hide
According to the website of magiskmanager, I enable the "Magisk hide" option in the setting of "Magisk Manager".
But no new option appear in my menu.
And when I close and reopen Magisk Manager, the option "Magisk hide" is unable now !
I don't no why !
Perhap's the problem is that I rooted my phone before install TWRP and Magisk ?
I don't remember how I do that but I had the SuperSu App on my phone.
But now, I don't see the SuperSu app since I installed TWRP and Magisk!
Need help!
Magisk hide don't work
I decided to restart from step 0 : I unroot my phone.
To do this, I re-install the official ROM.
I follow the tutorial find on tutoriels-android dot net.
And after, I reinstall TWRP (without root) and Magisk.
But same conclusion : I can't use Magisk hide.
Now I really need help!
Please!
Hello everyone
How to install magisk on lineageos 18.1?
I've downloaded/installed magisk.apk from official github website, but I cannot find clear steps about how to root the device, any help? thanks!
the device is sm-g900f
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Boatshow said:
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Click to expand...
Click to collapse
Thank you very much!
Boatshow said:
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Click to expand...
Click to collapse
thanks ! my d852 is now rooted!
Boatshow said:
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Click to expand...
Click to collapse
Hi Boatshow,
great - worked for me with Magisk 23.0 perfectly - thank you so much!!! Installing first wasn't necessary so, I just downloaded to SD Card, renamed, installed with TWRP. Than I had to finish installing inside system, now all works well!
Hey guys!
New here and new to Android in general.
Instead of creating another thread and I will if its preferred, I wanted to ask how do I install Magisk without TWRP?
I'm on LineageOS 8.1 and my device is an OnePlus 8T.
The goal is to pass SafetyNet.
Fumetsu_Guritto said:
Hey guys!
New here and new to Android in general.
Instead of creating another thread and I will if its preferred, I wanted to ask how do I install Magisk without TWRP?
I'm on LineageOS 8.1 and my device is an OnePlus 8T.
The goal is to pass SafetyNet.
Click to expand...
Click to collapse
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
jmh2002 said:
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
Click to expand...
Click to collapse
edit: possible human error.
Editx2: How crucial is it that I use this command to copy the patched image vs just dragging and dropping my phone to the pc?
Copy the patched image to your PC with ADB:adb pull /sdcard/Download/magisk_patched_[random_strings].img
My OnePlus 8T doesn't have an SD Card and I couldn't find the directory to run the command. Instead I dragged and dropped / copied from phone to PC - then flashed the patched boot.img.
After reboot my phone is stuck in the bootloader for LineageOS
How to install Magisk using Lineage Recovery? I installed LineageOS and my TWRP is gone, I now have Lineage Recovery. LeTv S3 Pro (X720).
I try to install magisk (21.4 22 23) in z3 compact with lineageos 18 and twpr 3.1.1 but nothing result… only apk is ok. It is possible have some help? Thanks! I need to boost power led in torch and video, so i must flash a magisk module.
rgr1 said:
How to install Magisk using Lineage Recovery? I installed LineageOS and my TWRP is gone, I now have Lineage Recovery. LeTv S3 Pro (X720).
Click to expand...
Click to collapse
Hi there, I have the same exact question here!
There seems to be no easy way to install TWRP on Pixel 3 XL...even if I would like to, as it would make full system backups a piece of cake!
ogghi said:
Hi there, I have the same exact question here!
There seems to be no easy way to install TWRP on Pixel 3 XL...even if I would like to, as it would make full system backups a piece of cake!
Click to expand...
Click to collapse
You can install Magisk thru LineageOS Recovery Mode, just use adb sideload magisk.zip(rename magisk.apk into magisk.zip) after you've installed Magisk app on your phone.
snickky said:
You can install Magisk thru LineageOS Recovery Mode, just use adb sideload magisk.zip(rename magisk.apk into magisk.zip) after you've installed Magisk app on your phone.
Click to expand...
Click to collapse
hi ,
i tried this and got error :
E:footer is wrong
E:signature verification failed
error:21
can you help please?
thank you .
jlll69 said:
hi ,
i tried this and got error :
E:footer is wrong
E:signature verification failed
error:21
can you help please?
thank you .
Click to expand...
Click to collapse
It worked for me. I did enable usb debugging as root tho maybe that could be it. I got
E:signiture verification failed
aswell but I just selected yes and it worked on my pixel XL