Database Users

GPS has gone whack

Hey guys,
Have been running a 4.4 ROM for a while (900i) and I finally bit the bullet and installed Phoenix Rom (900F).
It worked fantastically (aside from the NFC). I did notice the GPS failed to hookup. This was a problem so I restored my kitkat backup. However....
The GPS now no longer works!!? I download an original Kitkat Rom for my provider (optus) off Sammobile. Flashed with it with Odin and still it fails to connect.
Googling has led me to no immediate resolutions. I flashed 4.4 stock again with Odin and did a 5.0 Lollipop update OTA in hope that it would fix things.
It hasn't worked thus far. Was hopefing someone would know what was going on or could provide me with some guidance.
Cheers.

Tried a full factory reset from recovery / android settings after flashing the stock ROM ?

*Detection* said:
Tried a full factory reset from recovery / android settings after flashing the stock ROM ?
Click to expand...
Click to collapse
Yep. Still no dice.

Only other thing I can think of is to grab the correct PIT file for your model S5, flash that and a stock ROM at the same time using ODIN
If it still doesn't work after that, it sounds like a hardware issue
You say your phone is the G900I? And you flashed a G900F ROM to it?
Other than that, make sure other devices can get a GPS lock, make sure it's not just the weather stopping it working

*Detection* said:
Only other thing I can think of is to grab the correct PIT file for your model S5, flash that and a stock ROM at the same time using ODIN
If it still doesn't work after that, it sounds like a hardware issue
You say your phone is the G900I? And you flashed a G900F ROM to it?
Other than that, make sure other devices can get a GPS lock, make sure it's not just the weather stopping it working
Click to expand...
Click to collapse
Not exactly sure where to get the correct PIT file to flash.
I'll try disabling all weather settings though, didn't think of that one. Cheers

http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Scroll down and choose your model S5 PIT, Extract to .pit, add to PIT section, and flash with the stock ROM in AP or PDA section as normal
And I meant the weather outside stopping the phone seeing the satellites, heavily cloudy days can cause problems sometimes, but check settings, connections, location, is set to high accuracy

*Detection* said:
Tried a full factory reset from recovery / android settings after flashing the stock ROM ?
Click to expand...
Click to collapse
*Detection* said:
Only other thing I can think of is to grab the correct PIT file for your model S5, flash that and a stock ROM at the same time using ODIN
If it still doesn't work after that, it sounds like a hardware issue
You say your phone is the G900I? And you flashed a G900F ROM to it?
Other than that, make sure other devices can get a GPS lock, make sure it's not just the weather stopping it working
Click to expand...
Click to collapse
*Detection* said:
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Scroll down and choose your model S5 PIT, Extract to .pit, add to PIT section, and flash with the stock ROM in AP or PDA section as normal
And I meant the weather outside stopping the phone seeing the satellites, heavily cloudy days can cause problems sometimes, but check settings, connections, location, is set to high accuracy
Click to expand...
Click to collapse
Damn... 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again' :crying:
This is what I ran:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: Running it again. Appears to be running. I think my USB hub died which is why it 'failed'. Installing applications now and will post back as to whether the GPS is working or not.
I actually have a place to be which is why I'm desperately trying to fix things.
Unfortunately it hasn't fixed the GPS. I'll have to print out the Google Maps instructions.
EDIT 2: Tried this:
Open Phone, as if you were going to make a phone call and dial -
*#9090# (*#197328640# if that doesn't work)
Menu, select Key Input, enter Q
Menu, select Key Input, enter 0000
wait for the next menu. (It takes a while.)
UMTS->COMMON->NV REBUILD->NV REBUILD->SYSTEM->PROTOCOL->GPS->IMS
or, if you don't have UMTS:
UE SETTINGS & INFO->SETTING->SYSTEM->NV REBUILD->ALL
Click to expand...
Click to collapse
No cigar. Will to another factory reset when I have a chance.
EDIT 3: Did another factory reset through the menu and it said location set my GPS. I nearly fell over!

We're working. Thanks for all your help *Detection*

Great!

Hi there , i've had the same problem when installing a custom rom like PopWiz Telstra or other rom don't no why but this fix works for me every time :
Install latest rooted TW (original Samsung Touch wiz rom) like (Alexandr ROM )
Install from play store Shortcut Master or Phone Info
Open ‘Secret Code Explorer’ menu, scroll down to 27663368378 and launch it (select ‘Launch 0’, root is required).
Then select the latest menu option Hardware sensors
Then the latest option restore (rebuild) NVRAM (or something like that. I’m writing this from my memory )
Reboot the phone
Try GPS – it should work
I have just copy paste it from a site in works like a charm on g900f

Alright. I'm unhappy with the Optus Lollipop 5.0 stock. I can't install xposed because its odexed so I'm going back to the Phoenix 900F!
This time I'm going to install it with TWRP.
Will then go through the troubleshooting attempts in an attempt to have a GREAT rom with a fully functional GPS!~

Huawei Mate 8 FRP ( Google Account) Locked!

Hello guys,
Just got this Mate 8 NXT-L29 which locked by the Google Account security,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Bootloader is locked
Can someone help in this ?
Thanks in advance

If that is the first and only screen that is displayed after turning the phone on, then the phone might have been protected by the previous owner using the Android Device Manager app, and therefore it can be unlocked only accessing the original Google account.

themissionimpossible said:
If that is the first and only screen that is displayed after turning the phone on, then the phone might have been protected by the previous owner using the Android Device Manager app, and therefore it can be unlocked only accessing the original Google account.
Click to expand...
Click to collapse
It's not locked by Android Device Manager App, This is FRP Lock (Factory Reset Protection),
And yes, it asks for the previous owner's account, but there is a way to get around that and bypass the lock,
And since i couldn't find any guide for how to do that for this model, I'm asking here.
BTW: I have DC-Unlocker and it can remove the lock in 1 min, but i need to know how exactly it works.

mirosaw2 said:
It's not locked by Android Device Manager App, This is FRP Lock (Factory Reset Protection),
And yes, it asks for the previous owner's account, but there is a way to get around that and bypass the lock,
And since i couldn't find any guide for how to do that for this model, I'm asking here.
BTW: I have DC-Unlocker and it can remove the lock in 1 min, but i need to know how exactly it works.
Click to expand...
Click to collapse
same problem how can i fix this

kawadarsim said:
same problem how can i fix this
Click to expand...
Click to collapse
Actually, i did it with DC-Unlocker via Fastboot mode, i can do it remotely for you, but i can't do it for free cuz it costs me 4 dc credits, like 10 bucks,
But you can hold on for a while, for sure someone will find a way to bypass it.
Sent from my mshibo-s6e using Tapatalk

Factory reset via recovery also solves this problem.
Like off the phone.
Press vol-up+power and.This.boots.into recovery.
Do factory reset and then reboot. Works.just fine

mirosaw2 said:
Hello guys,
Just got this Mate 8 NXT-L29 which locked by the Google Account security,
-Bootloader is locked
Can someone help in this ?
Thanks in advance
Click to expand...
Click to collapse
Irrelevant with the post but i think you put your tempered glass the wrong way!

bluheart said:
Factory reset via recovery also solves this problem.
Like off the phone.
Press vol-up+power and.This.boots.into recovery.
Do factory reset and then reboot. Works.just fine
Click to expand...
Click to collapse
How come you don't know about FRP man !!!
Please, read this
http://www.androidpolice.com/2015/0...evice-protection-feature-and-how-do-i-use-it/
Sent from my mshibo-s6e using Tapatalk

icy20 said:
Irrelevant with the post but i think you put your tempered glass the wrong way!
Click to expand...
Click to collapse
I think it's a Mate 7 protector, with the gap in the protector for the sensors on the left side... :good:

I know, but we reset on Sammy phone and it worked
Any way, could you by pass the screen?

same problem how can i fix this
same problem how can i fix this

same problem how can i fix this , have any bypass solution?

I see solution here as done by one of my friend who owns a mobile shop.
Unlock boot - Flash TWRP - wipe-format data- Flash decrypted boot and then flash International Rom and do set-up.

Try this...

Hey guys!
Maybe this ...
https://www.dc-unlocker.com/huawei-android-phone-frp-unlock

if some one need such service let me know i can do

here is working method

I got stuck with a FRP and nougat without keyboard... was what the method that works?? the video link is death

I don't have the problem but found this by accident http://www.androidmobiletools.com/2016/11/huawei-frp-lock-remove-bypass-tool-free.html
Maybe it helps?

rophiroth said:
I got stuck with a FRP and nougat without keyboard... was what the method that works?? the video link is death
Click to expand...
Click to collapse
I face the same and below worked for me.
1. reset the password of my google account (I have change to something which can be applied with Google voice input since i don't have keyboard)
2. After reset the password we can try it again on the phone after 72 hours (72 hours restriction is there by Google)
3. Enjoyed without smartphone for 3 days.
4. On 4th day I have retried with new password (through google voice).
5. Worked fine for me.
6. After I was successfully in then installed google keyboard through voice commands
Right now Bluetooth is not working and looking for a solution.
Regards
Naeem Akhtar

Please help me with my S7 Edge SM-G935F

Hello everyone,
My brother has just offered me a s7 edge SM-G935F / 32G, Rom stock without operator that he used for 2 months after purchase.
My pb is that after resertting this phone, then reboot, I am asked the google account with which this phone was syncing (it's of my bro). Normal!
Then I enter the data account google of my brother and then Passwords ... and there, a verification code sent him that communicates me by sms after receiving.
But helas, every time I get it, the phenomenon is repeated and so I can not use the phone for use!
My idea was to flash the last ROM Stock...but no way, the pb is always the same...the warning message !
For info, the dl and recovery mode are operational but I am without root so without TWRP and other ++++
However, the dev mode of the system is not activated too ...
Thank you for your help...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
B
sorry for my bad english !:silly:

Bishopandme said:
Hello everyone,
My brother has just offered me a s7 edge SM-G935F / 32G, Rom stock without operator that he used for 2 months after purchase.
My pb is that after resertting this phone, then reboot, I am asked the google account with which this phone was syncing (it's of my bro). Normal!
Then I enter the data account google of my brother and then Passwords ... and there, a verification code sent him that communicates me by sms after receiving.
But helas, every time I get it, the phenomenon is repeated and so I can not use the phone for use!
My idea was to flash the last ROM Stock...but no way, the pb is always the same...the warning message !
For info, the dl and recovery mode are operational but I am without root so without TWRP and other ++++
However, the dev mode of the system is not activated too ...
Thank you for your help...
B
sorry for my bad english !:silly:
Click to expand...
Click to collapse
You are facing FRP issue which is factory reset protection security feature by google..So everytime you will reset your device, you will be askd for the same google account which was previously added to device..Are you on marshmallow or nougat? IF your phone is functioning well then enable developers option by pressing build no for 7-8 times from software info you will find in about device from settings..After enabling developers option enable Oem unlocking..Hope this will help you..You can also flash latest stock firmware for your device usinh odin after enabling Oem unlocking from developers option

@DroidHackeR,
I'm in nougat because i have flash the latest Rom Stock yet with odin (4 files) + factory restet!
But the pb is the same...because i can't enable Oem unlocking from developers option by pressing build no for 7-8 times from software info
I have no access to do that, My procedure stops until the moment to put the login of gmail ... I do not go beyond that after the flash !
Another idea pl?
How can i enable Oem option directly by odin for example?
I can't flash custom rom because of it too...
Ths for your help.
B

Bishopandme said:
@DroidHackeR,
I'm in nougat because i have flash the latest Rom Stock yet with odin (4 files) + factory restet!
But the pb is the same...because i can't enable Oem unlocking from developers option by pressing build no for 7-8 times from software info
I have no access to do that, My procedure stops until the moment to put the login of gmail ... I do not go beyond that after the flash !
Another idea pl?
How can i enable Oem option directly by odin for example?
I can't flash custom rom because of it too...
Ths for your help.
B
Click to expand...
Click to collapse
Just download latest 7.0 stock firmware for your device from sammobile.com though your already on nougat..firmwares there are updated according to security patches timely..so my suggestion is download latest nougat firmware for your model and country and flash usinh odin as described above..You will boot normally...If after flashing latest nougat if your device stuck at Samsung logo i.e. called bootloop..Press volume up+power +home button, you will boot into stock recovery..from there choose wipe data/factory reset option..you will boot up normally..
---------- Post added at 02:48 PM ---------- Previous post was at 02:40 PM ----------
Bishopandme said:
@DroidHackeR,
I'm in nougat because i have flash the latest Rom Stock yet with odin (4 files) + factory restet!
But the pb is the same...because i can't enable Oem unlocking from developers option by pressing build no for 7-8 times from software info
I have no access to do that, My procedure stops until the moment to put the login of gmail ... I do not go beyond that after the flash !
Another idea pl?
How can i enable Oem option directly by odin for example?
I can't flash custom rom because of it too...
Ths for your help.
B
Click to expand...
Click to collapse
You can also refer this video by root junky which will give you option to overcome frp
https://m.youtube.com/watch?v=JzywoFS_r9U&time_continue=2

Ah ok...just after the reboot i doesn't let the phone start and must to reboot in recovery mode for doing the wipes and reset option.
ok i will do it as soon as...
wait for a moment pl!
B

@DroidHackeR,
i have just test your first idea and...it dosen't work !
I will test the video way ...it's seem no easy to me!
Ths for your help.
B

Bishopandme said:
@DroidHackeR,
i have just test your first idea and...it dosen't work !
I will test the video way ...it's seem no easy to me!
Ths for your help.
B
Click to expand...
Click to collapse
Go ti video reference and follow the steps carefully hope it will help you..Or another tricks are there to overcomd FRP issue i.e. using adb commands and otg cable..You can search on google.

DroidHackeR said:
Go ti video reference and follow the steps carefully hope it will help you..Or another tricks are there to overcomd FRP issue i.e. using adb commands and otg cable..You can search on google.
Click to expand...
Click to collapse
when i read the differents backs experiences...there's apparently a pb with the camera step way!
They said "On Samsung Galaxy s6 Edge plus there is no camera when you restart the phone. What's the Problem?"
and others phones too....
:crying:

i find this....for S7 Edge
https://www.youtube.com/watch?v=ChC...id=video:3e542a13-8bf9-4684-b336-004044a96320
tic tac

Bishopandme said:
i find this....for S7 Edge
&feature=iv&src_vid=JzywoFS_r9U&annotation_id=video%3A3e542a13-8bf9-4684-b336-004044a96320
tic tac
Click to expand...
Click to collapse
Yes refer this video to overcome FRP...Watch the video carefully and follow the steps described

Hi @DroidHackeR,
I realize that this video is no longer current because dating several months ... besides, nothing makes clear if this manupulations was made under Nougat or old versions ...
Recent updates may have blocked it, hence the large number of errors identified ...
what do you think?
Thank you !
B

Bishopandme said:
Hi @DroidHackeR,
I realize that this video is no longer current because dating several months ... besides, nothing makes clear if this manupulations was made under Nougat or old versions ...
Recent updates may have blocked it, hence the large number of errors identified ...
what do you think?
Thank you !
B
Click to expand...
Click to collapse
Will you please checkout the video i am going to provide link below? It claims about bypass of google FRP protection on devices running Nougat..i.e.s7edge is also included..Please watch this video carefully and report if it helped you or not
http://pangu.in/nougat-remove-google-verify-account-samsung-frp/

@DroidHackeR, OUrahhhh!!!!
Successfully with this method, look here: ....https://www.youtube.com/watch?v=8g4MG0ZRF1M&t=67s
Ths for all !
Enjoy !
B

Bishopandme said:
@DroidHackeR, OUrahhhh!!!!
Successfully with this method, look here: ....
&t=67s
Ths for all !
Enjoy !
B
Click to expand...
Click to collapse
Ohhhk dear @Bishopandme i am very glad to see your phone is saved and all of our quotes and comments are reserved in this thread to help any other suffering from same issue..Cheers..

Samsung TAB A SM-P580 FRP Bypass

Can anyone help me with this issue?
I have factory reset this device and reflashed with JOdin3. The device has been rooted in the past. I got into this mess by turning on FRP accidently after rooting. When I turn on device I am taken to language settings, then wifi settings, then to terms and conditions, after I am faced with Google verification.
I do get a notice on start-up... Notice states:
"An unauthorized attempt has been made to reset your device to factory default settings. Connect to a Wi-Fi or mobile network to verify identity."
Any ideas on how to bypass FRP?

firstly you have to download Bypass Samsung Google account verification app apk.
1. then, Copy the apk file to your USB.
2. Using the OTG cable connect your USB to phone.
3. Once connected, it will popup the file manager app and install the apk app.
4. You should now have access to phone settings.
5 .Scroll down and find Backup and reset.
6. Tap Factory data reset and Reset device or Erase everything which will erase the following from your device:
Google Account
System and app data
Device settings
Downloaded apps
Music, Pictures and all other user data.
7 .Finally your phone will reboot normally and may take some time while booting and that is normal after resetting your device.
This information may be helpful for you.

rohnallen said:
firstly you have to download Bypass Samsung Google account verification app apk.
1. then, Copy the apk file to your USB.
2. Using the OTG cable connect your USB to phone.
3. Once connected, it will popup the file manager app and install the apk app.
4. You should now have access to phone settings.
5 .Scroll down and find Backup and reset.
6. Tap Factory data reset and Reset device or Erase everything which will erase the following from your device:
Google Account
System and app data
Device settings
Downloaded apps
Music, Pictures and all other user data.
7 .Finally your phone will reboot normally and may take some time while booting and that is normal after resetting your device.
This information may be helpful for you.
Click to expand...
Click to collapse
Thank you for replying. Will this method work with the Wifi Tab A SM-P580? This device is not a phone.
I have factory reset this device and reflashed with JOdin3. The device has been rooted in the past. I got into this mess by turning on FRP accidently after rooting. :crying:When I turn on device I am taken to language settings, then wifi settings, then to terms and conditions, after I am faced with Google verification.
I do get a notice on start-up... Notice states:
"An unauthorized attempt has been made to reset your device to factory default settings. Connect to a Wi-Fi or mobile network to verify identity."
Help...

rohnallen said:
firstly you have to download Bypass Samsung Google account verification app apk.
1. then, Copy the apk file to your USB.
2. Using the OTG cable connect your USB to phone.
3. Once connected, it will popup the file manager app and install the apk app.
4. You should now have access to phone settings.
5 .Scroll down and find Backup and reset.
6. Tap Factory data reset and Reset device or Erase everything which will erase the following from your device:
Google Account
System and app data
Device settings
Downloaded apps
Music, Pictures and all other user data.
7 .Finally your phone will reboot normally and may take some time while booting and that is normal after resetting your device.
This information may be helpful for you.
Click to expand...
Click to collapse
Do you have a link to the apk bypass file for this device?

Any method to bypass RFP? im on 6.01 from 17 Jan 2017 with security patch 2017-01-01

xhitm3n said:
Any method to bypass RFP? im on 6.01 from 17 Jan 2017 with security patch 2017-01-01
Click to expand...
Click to collapse
Try to downgrade firmware, mine is PH6 , downgrade to Hong Kong firmware which has lower build.
Then you can bypass FRP easily, it can be done within 3 minutes

If you go to YouTube and do a search for "bypass google account samsung tab a" about 15 video's pop up walking you through it.
Just wade through the results as they are mixed in with the phones also.
Dont feel like typing ??
Click ME I will take you there.
..
..
<end>

Thibor69 said:
If you go to YouTube and do a search for "bypass google account samsung tab a" about 15 video's pop up walking you through it.
Just wade through the results as they are mixed in with the phones also.
Click to expand...
Click to collapse
Google watched and blocked these methods already.
Try to activate FRP in your tablet by hard reset and see which one you can bypass
You should be specific as most are not working with current build.

Beut said:
Google watched and blocked these methods already.
Try to activate FRP in your tablet by hard reset and see which one you can bypass
You should be specific as most are not working with current build.
Click to expand...
Click to collapse
New method worked! Search youtube for "Samsung Galaxy Tab A T580 FRP with Wifi Only". Just did it on my SM-T580 Wifi only with firmware 6.0.1 MMB29K.T580UEU2APL4.

ImRickJames said:
New method worked! Search youtube for "Samsung Galaxy Tab A T580 FRP with Wifi Only". Just did it on my SM-T580 Wifi only with firmware 6.0.1 MMB29K.T580UEU2APL4.
Click to expand...
Click to collapse
Thanks for being specific and confirmation. I did it today and success with the latest build PL4 which I failed to downgrade.

ImRickJames said:
New method worked! Search youtube for "Samsung Galaxy Tab A T580 FRP with Wifi Only". Just did it on my SM-T580 Wifi only with firmware 6.0.1 MMB29K.T580UEU2APL4.
Click to expand...
Click to collapse
This method works with build PL4, but not with the older build PG1 or Android 7, QE7 from Germany.
Build PG1 I have to downgrade firmware to bypass FRP. Tested with SM-T280 and SM-T560, this method doesn't work either because there is no Assist to open a browser. This build PG1, it has to be downgraded or upgraded to work with a certain method, I prefer upgrade as I don't have to do the update later.
Depending on your build, not every method will work. The statement you read everywhere : " work with all models " is not true from my experiments with FRP bypass.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Update not listed in software - "n910cxxu2dvh2"

Recently I reinstalled the system and I did not have time to install SU and an update popped out. Unfortunately, I can't download this version anywhere, either there is a problem or this version does not exist. Can anyone help me with this? The phone is SM-N910C / XEO.
Log from SAMFIRM:
SamFirm v0.5.0
Checking firmware for SM-N910C/XEO/N910CXXU2DVH2/N910COXA2DVH2/N910CXXU2DVH2/N910CXXU2DVH2
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
Checking firmware for SM-N910C/XEO/N910CXXS2DRI2/N910COXA2DQK1/N910CXXU1DQG1/N910CXXS2DRI2
Model: SM-N910C
Version: N910CXXS2DRI2/N910COXA2DQK1/N910CXXU1DQG1/N910CXXS2DRI2
OS: Marshmallow(Android 6.0.1)
Filename: SM-N910C_1_20181115200627_9ug633aafa.zip.enc4
Size: 2228227696 bytes
LogicValue: iekgyc5u90o1sh58
Click to expand...
Click to collapse
Photos of the version from the phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How can you download 1 and 4 files soft for this?

@Tomasz Dulak did you try with old samfirm version?
That doesn't work any longer as Samsung changed its server addresses afaik.
Try SamFirm_Reborn_0.3.6.3.

Still the same :/

Tomasz Dulak said:
Still the same :/
Click to expand...
Click to collapse
May work when you switch to manual and fill the fields below with entries needed.
Had that on a VZW phone as well.
But afaik that will only work if it's the latest stock and for me it seems there's a later one:
XEO-N910CXXS2DRI2-20181204144801.

I also fail to enter manually.
Well, mine isn't there at all, and it's dated August 12, 2022, looking at the kernel version after the update. It's just that someone posted an update after 4 years.
The last one available for today is: "N910CXXS2DRI2", but when you install it, you get the update to "N910CXXS2DVH2".

@Tomasz Dulak How's the progress? Did you flash it with DRI2, or stays with DVH2?

I haven't installed N910CXXU2DVH2 patch yet.
I'm trying to add a Samsung account and receive an error like:
Code:
403
Sorry, the resource you want to access is forbidden, so this request has been refused. If you have any questions, please contact the administrator.
*
WIPV2nullnull_XXXXXXXXXXXXXX_99999-YYYYYYYYYYY.999.
I can easily log in via a web browser.
Can anyone log into Samsung account without this fix?

@ze7zez
I have N910H here and flashed system.img, boot.img, and csc_sec.zip from XEO DRI2 N910C firmware. There's no problem in adding Samsung account.
The problem that I'm facing is that, I couldn't get the DVH2 OTA update, since it will throws me the message of "The operating system on your device has been modified in an unauthorized way..."
It may be fixed if I also flash the bootloader from N910C or might also tweak it, but that's such a painful thing to recover if it went brick, I don't want to risk it yet.

UnknownPlanet said:
@ze7zez
I have N910H here and flashed system.img, boot.img, and csc_sec.zip from XEO DRI2 N910C firmware. There's no problem in adding Samsung account.
The problem that I'm facing is that, I couldn't get the DVH2 OTA update, since it will throws me the message of "The operating system on your device has been modified in an unauthorized way..."
It may be fixed if I also flash the bootloader from N910C or might also tweak it, but that's such a painful thing to recover if it went brick, I don't want to risk it yet.
Click to expand...
Click to collapse
Thanks for the information.
I will insert the SIM card and check again.
I wouldn't risk flashing the bootloader from the N910C to the N910H. Are you sure the system will boot?

@ze7zez
No I'm not sure, I've done a hex compare and they are different. There are 90 out of 1,034,240 bytes of param.bin and 9487 out of 1,632,800 bytes of sboot.bin that is different from N910H bootloader.
That would be tedious trying to decode what makes it differs and thus tweak it..
In the end, I'm stuck with DRI2 firmware. I'd like to try DVH2, but there's no software available that I know at the moment that is able to download it.
Just ask help here again if you need help on your Samsung account.

ze7zez said:
I haven't installed N910CXXU2DVH2 patch yet.
I'm trying to add a Samsung account and receive an error like:
Code:
403
Sorry, the resource you want to access is forbidden, so this request has been refused. If you have any questions, please contact the administrator.
*
WIPV2nullnull_XXXXXXXXXXXXXX_99999-YYYYYYYYYYY.999.
I can easily log in via a web browser.
Can anyone log into Samsung account without this fix?
Click to expand...
Click to collapse
Got that issue on a S8 and 2 S7 Edges. had to send them back

dave678 said:
Got that issue on a S8 and 2 S7 Edges. had to send them back
Click to expand...
Click to collapse
I solved the problem and described in the thread.
dave678 said:
Got that issue on a S8 and 2 S7 Edges. had to send them back
Click to expand...
Click to collapse
I solved the problem and described in the thread.
[STOCK ROM][NO ROOT][Android 4] Correct login to Google account after phone reset
There are devices with android 4 in which after a reset to factory settings or very long ago not updated, there is no way to log in to a Google or Samsung account. Here is a proven repair method. Before you proceed with the repair, you need to...
forum.xda-developers.com

ze7zez said:
I solved the problem and described in the thread.
I solved the problem and described in the thread.
[STOCK ROM][NO ROOT][Android 4] Correct login to Google account after phone reset
There are devices with android 4 in which after a reset to factory settings or very long ago not updated, there is no way to log in to a Google or Samsung account. Here is a proven repair method. Before you proceed with the repair, you need to...
forum.xda-developers.com
Click to expand...
Click to collapse
Too bad your post came way too late as I already returned the devices mentioned. Those devices were running Android 7.0.

ze7zez said:
I solved the problem and described in the thread.
I solved the problem and described in the thread.
[STOCK ROM][NO ROOT][Android 4] Correct login to Google account after phone reset
There are devices with android 4 in which after a reset to factory settings or very long ago not updated, there is no way to log in to a Google or Samsung account. Here is a proven repair method. Before you proceed with the repair, you need to...
forum.xda-developers.com
Click to expand...
Click to collapse
I had this same issue on a Tab S I bought off Ebay and it was luckily solved by downgrading to 5.0.2 Lollipop.