Database Users

GA5151F Manuals?

I recently installed the GA5151F in my 2007 mazdaspeed. I do did not get any manuals for it. They gave me a link for a website manual but that unit was not listed. Does anyone have those? I contacted Eonon too and if I get them I will post them here.
I am also wondering if I can use the Malaysk rom with this unit and if so is there a guide to doing it? I have been searching and reading but not quite sure exactly what I need. The info for this seems to be all over the place or else I am just not seeing it. I have rooted and flashed android devices before. Thank you for all and any help.

I have the same unit in my Mazda3 with no manuals. Didn't really ever need it though since there was an installation video. What exactly are you looking for with the manual?

destructo322 said:
I have the same unit in my Mazda3 with no manuals. Didn't really ever need it though since there was an installation video. What exactly are you looking for with the manual?
Click to expand...
Click to collapse
I wasn't looking for anything specific, just wanted to look it over to see if I was missing anything important. Did you modify yours with a different rom or anything?

JohnnyTightlips said:
I wasn't looking for anything specific, just wanted to look it over to see if I was missing anything important. Did you modify yours with a different rom or anything?
Click to expand...
Click to collapse
Not yet. I've actually been looking over a lot of sources to see what changes I can make. Malaysk ROM looks like it should be good as long as you use the ones for RK3188 / 800 x 480 resolution. That can be found here: http://forum.xda-developers.com/showthread.php?t=3246370. Information and instructions on where I found that it works is here: http://forum.xda-developers.com/android-auto/android-head-units/eonon-ga5153f-mcu-t3217479/page2
It looks like changing the rom is fine as long as you don't make any changes to the MCU because i don't find any support for MTCB-ZD.
You can also find other useful apps and information at the following link that are applicable to most android units:
http://forum.xda-developers.com/wiki/Hui_Fei_Type#MTCB_Android_Automotive_Head_Units
Let me know if you make any changes to your system as I won't have access to mine for another two weeks.

destructo322 said:
Not yet. I've actually been looking over a lot of sources to see what changes I can make. Malaysk ROM looks like it should be good as long as you use the ones for RK3188 / 800 x 480 resolution. That can be found here: http://forum.xda-developers.com/showthread.php?t=3246370. Information and instructions on where I found that it works is here: http://forum.xda-developers.com/android-auto/android-head-units/eonon-ga5153f-mcu-t3217479/page2
It looks like changing the rom is fine as long as you don't make any changes to the MCU because i don't find any support for MTCB-ZD.
You can also find other useful apps and information at the following link that are applicable to most android units:
http://forum.xda-developers.com/wiki/Hui_Fei_Type#MTCB_Android_Automotive_Head_Units
Let me know if you make any changes to your system as I won't have access to mine for another two weeks.
Click to expand...
Click to collapse
Thanks a lot for the info, I may just mess with it this weekend. I will keep you posted.

HU Updated
I got a little bored last night and decided to go through with this.
I put the update_4_4_4_FUSE_800X480_RK3188_16_MAL_22_05_2016_AUDIO on my head unit and it worked.
I put update.img on the root of a usb stick and put it in the port labeled usb.
I turned on the unit and went into the Settings menu, move to very bottom of the menu, select “About tablet”
Select “System Updates”

Select “Wipe data from the flash” option and click “Install”
I then let it fully install and it sat at the mazda logo forever. I finally read more of the instructions and saw it will always do that.
I shut the car off.
I then turned the car back on holding the power button and I pushed the reset button, not sure which one did it but then it showed it was erasing
After that it booted up and everything worked well.
My only issue is that the Android Head Unit app service thing does not control google music, which is the only music app I really want to use.
Any ideas?
Also is there a guide for this rom and all the cool features it has?
I also don't understand how I stop the radio when I switch to another app like google music? It keeps playing unless I hit the mode button and switch to music.
Another problem I would like to address is when my phone connects over bluetooth for it to auto turn on wifi tether, I think tasker can do this but I wasn't sure if there was another app. I do really like this head unit but I have a lot of tweaking to do before I get it where I would like it.

JohnnyTightlips said:
I got a little bored last night and decided to go through with this.
I put the update_4_4_4_FUSE_800X480_RK3188_16_MAL_22_05_2016_AUDIO on my head unit and it worked.
I put update.img on the root of a usb stick and put it in the port labeled usb.
I turned on the unit and went into the Settings menu, move to very bottom of the menu, select “About tablet”
Select “System Updates”

Select “Wipe data from the flash” option and click “Install”
I then let it fully install and it sat at the mazda logo forever. I finally read more of the instructions and saw it will always do that.
I shut the car off.
I then turned the car back on holding the power button and I pushed the reset button, not sure which one did it but then it showed it was erasing
After that it booted up and everything worked well.
My only issue is that the Android Head Unit app service thing does not control google music, which is the only music app I really want to use.
Any ideas?
Also is there a guide for this rom and all the cool features it has?
I also don't understand how I stop the radio when I switch to another app like google music? It keeps playing unless I hit the mode button and switch to music.
Another problem I would like to address is when my phone connects over bluetooth for it to auto turn on wifi tether, I think tasker can do this but I wasn't sure if there was another app. I do really like this head unit but I have a lot of tweaking to do before I get it where I would like it.
Click to expand...
Click to collapse
Thanks for the info. Should be useful when I get to it so I don't freak out from the logo.
For Google Play Music: http://forum.xda-developers.com/showthread.php?p=63877529 . I think this app just had a checkbutton for me to use spotify, but it should support google play although I'm not sure if you need to do anything extra.
Malaysk guide: I am not aware of any, but it seems to be used across a lot of head units so there is probably some videos on YouTube.
Radio issue: I think it may be a bug in Eonon's MCU which is only updated by Eonon and you probably have to specifically ask them for any updates. I may do that at some point because it annoys me also. I usually was just exiting out using the back button before I found that mode fixes it temporarily just recently. You might be able to just use Tasker to kill the radio app whenever Google Play Music is opened.
Auto-tether: I used tasker to do this whenever it connects to EONON on bluetooth and would automatically end the tether when disconnected. Other apps may work such as https://play.google.com/store/apps/details?id=eu.inrete.autotethering&hl=en
As for me, I used to have my unit set up where tasker on the phone would turn on hotspot and use spotify through the head unit. Now, I just have my HU start up at bluetooth and tasker on my phone opens a specific spotify playlist whenever it detects i am connected to Eonon. I mainly do this just because I download songs on spotify and podcasts to my phone whenever I'm on wifi to save data. I'm thinking about mirroring my phone using EasyConnected and seeing how that works out on the HU.

JohnnyTightlips said:
I recently installed the GA5151F in my 2007 mazdaspeed. I do did not get any manuals for it. They gave me a link for a website manual but that unit was not listed. Does anyone have those? I contacted Eonon too and if I get them I will post them here.
I am also wondering if I can use the Malaysk rom with this unit and if so is there a guide to doing it? I have been searching and reading but not quite sure exactly what I need. The info for this seems to be all over the place or else I am just not seeing it. I have rooted and flashed android devices before. Thank you for all and any help.
Click to expand...
Click to collapse
Is it an MTCB head unit ? Can you post a pic of your settings/about device screen ?

typos1 said:
Is it an MTCB head unit ? Can you post a pic of your settings/about device screen ?
Click to expand...
Click to collapse
Will post pics soon, life is crazy busy atm.

http://imgur.com/a/hoWtd
Is this what you are looking for?

JohnnyTightlips said:
http://imgur.com/a/hoWtd
Is this what you are looking for?
Click to expand...
Click to collapse
Yeah, the last pic was.
You have an MTCB units made by ZD.
There are some manuals around, come KLD ROMs have them on the unit, you dont really need one, but if you must one have I could get a copy for you, its not very detailed and its the same for all units from all manufacturers apart from minor details like the launcher.

typos1 said:
Yeah, the last pic was.
You have an MTCB units made by ZD.
There are some manuals around, come KLD ROMs have them on the unit, you dont really need one, but if you must one have I could get a copy for you, its not very detailed and its the same for all units from all manufacturers apart from minor details like the launcher.
Click to expand...
Click to collapse
Eonon just sent me this.
Wish you a good day.
Sorry for inconvenience caused.
Here is online user manual for your reference:
http://i.sbo2.com/page/GASeriesAndroid4.4Manual(eonon)_EN.html
Here is an installation video for your reference:
https://www.youtube.com/watch?v=jZIsormC28A
Any further questions pls feel free to contact me.
Have a nice day.

typos1 said:
Yeah, the last pic was.
You have an MTCB units made by ZD.
There are some manuals around, come KLD ROMs have them on the unit, you dont really need one, but if you must one have I could get a copy for you, its not very detailed and its the same for all units from all manufacturers apart from minor details like the launcher.
Click to expand...
Click to collapse
Does that microphone mod still apply to these units? I have not had a chance to test the external mic but it is all hooked up. Another thing I was wondering is if you still need to do the audio mod to get better sound quality on these units as well. I won't be taking it apart any time soon but when I upgrade to an amp and better speakers I might if that is still needed. I also can not figure out how to get the screensaver mph to display anything and the clock is wrong. Thanks for the help.

JohnnyTightlips said:
Does that microphone mod still apply to these units? I have not had a chance to test the external mic but it is all hooked up. Another thing I was wondering is if you still need to do the audio mod to get better sound quality on these units as well. I won't be taking it apart any time soon but when I upgrade to an amp and better speakers I might if that is still needed. I also can not figure out how to get the screensaver mph to display anything and the clock is wrong. Thanks for the help.
Click to expand...
Click to collapse
The ZD units are relatively rare, I think youd have to take yours apart to see about the mic set up, but its probably roughly the same as the other units, which are all slightly different but they all need modding, best check out the mic mod thread to see if anyone has done it to a ZD unit.
Pretty certain it will have he audio controller hooked up to the MCU rather than Android so you would need to do 7floor's audio mod, assuming of course that youre not happy with the sound as it is, there is a slight sound quality improvement with the Lollipop update so you may wanna try that.
What screensaver is that, one from on here or did it come on the unit ?
---------- Post added at 01:28 AM ---------- Previous post was at 01:15 AM ----------
destructo322 said:
It looks like changing the rom is fine as long as you don't make any changes to the MCU because i don't find any support for MTCB-ZD.
Click to expand...
Click to collapse
Its not that the MCU is not suported, its that the ZD units have only started appearing recently so they are no MCU updates yet, plus you cant get a copy of the MCU off the unit, in time ZD MCU updates will no doubt turn up.
destructo322 said:
Radio issue: I think it may be a bug in Eonon's MCU which is only updated by Eonon and you probably have to specifically ask them for any updates. I may do that at some point because it annoys me also. I usually was just exiting out using the back button before I found that mode fixes it temporarily just recently. You might be able to just use Tasker to kill the radio app whenever Google Play Music is opened.
Auto-tether: I used tasker to do this whenever it connects to EONON on bluetooth and would automatically end the tether when disconnected. Other apps may work such as https://play.google.com/store/apps/details?id=eu.inrete.autotethering&hl=en
Click to expand...
Click to collapse
These units need an app to control switching between music apps other than the MTC ones that they come with, otherwise your ll get 2 sources playing at once, this is what @JohnnyTightlips was referring to.
Eonon are sellers ONLY, all they do is buy these from ZD, stick badges on and sell them, they do not make the MCU or have anything to do with it, its a ZD MCU ie, like all the other MTCB units, its an STMicroElectronics MCU with software developed by MTC for ZD. Its not an Eonon MCU, the radio issue he was talking about is the one I referred to above.
Forget about Eonon (apart from as a possible source of updates) and about "GA5151F" (it means nothing), you both have ZD MTCB head units - a good example is if you bought a BMW from a dealers called Smith & Son, you dont have a car called a Smiths & Son, you have a BMW.

My next and previous track steering wheel controls don't seem to work in Google play music. I see the next and previous toast come up on the screen when I press them but nothing happens in the app. volume and mute work great. I'm not sure if maybe there is a setting I'm missing. I also don't know what the control settings app does. And in the viper audio tool what settings do I adjust for Android music apps? Also what is the biggest fat32 SD card I can have in each slot 128gb? Thanks for the help.

JohnnyTightlips said:
Does that microphone mod still apply to these units? I have not had a chance to test the external mic but it is all hooked up. Another thing I was wondering is if you still need to do the audio mod to get better sound quality on these units as well. I won't be taking it apart any time soon but when I upgrade to an amp and better speakers I might if that is still needed. I also can not figure out how to get the screensaver mph to display anything and the clock is wrong. Thanks for the help.
Click to expand...
Click to collapse
Isn't the mic mod just for units that only have internal mics? The HU already has the option for an external microphone so I don't see much reason needed to solder in an external mic. Nobody that's called me has complained of the internal mic so I haven't even connected an external yet, but I might next time I take it out because it's too annoying to put back in.

I have the external mic hooked up and did a test the other day. I was driving at 80mph and the person on the other line said I sounded great and it sounded like I was using the phone itself. My external is mounted to the top/side of the steering column.

JohnnyTightlips said:
My next and previous track steering wheel controls don't seem to work in Google play music. I see the next and previous toast come up on the screen when I press them but nothing happens in the app. volume and mute work great. I'm not sure if maybe there is a setting I'm missing. I also don't know what the control settings app does. And in the viper audio tool what settings do I adjust for Android music apps? Also what is the biggest fat32 SD card I can have in each slot 128gb? Thanks for the help.
Click to expand...
Click to collapse
Control settings is for CAN Bus data, different apps will appear depending on what setting you have your unit set on in factory settings.
destructo322 said:
Isn't the mic mod just for units that only have internal mics? The HU already has the option for an external microphone so I don't see much reason needed to solder in an external mic. Nobody that's called me has complained of the internal mic so I haven't even connected an external yet, but I might next time I take it out because it's too annoying to put back in.
Click to expand...
Click to collapse
All units have built in mics, most people find it useless for calls but some find it ok for google now.
JohnnyTightlips said:
I have the external mic hooked up and did a test the other day. I was driving at 80mph and the person on the other line said I sounded great and it sounded like I was using the phone itself. My external is mounted to the top/side of the steering column.
Click to expand...
Click to collapse
Most, but not all, people find they need to do the mic mod.

Does that canbus app let you do anything? I opened it and it have a bunch of buttons but nothing seemed to do anything. Is that where I am supposed to set what the steering controls do?

JohnnyTightlips said:
Does that canbus app let you do anything? I opened it and it have a bunch of buttons but nothing seemed to do anything. Is that where I am supposed to set what the steering controls do?
Click to expand...
Click to collapse
No, its not for SWC, only for CAN Bus, not all cars are supported.

JY-UN138 - Joying 8" 2DIN Android 4.4.4

I ordered this from the CarJoying website.
https://www.carjoying.com/2-din-car...-bluetooth-dab-wifi-mirror-link-obd2-nfc.html
It took less than 1 week to arrive and it also had postage tracking details.
I installed this into my 2016 Toyota Fortuner (Australian model). Below you can see a picture of what the original head unit looks like. It's about 8-9 inches and I didn't want to install it using the original facia because there would be a very big gaping hole around the headunit. You can find 2Din facias on EBay and Aerpro webiste
Original headunit
https://www.dropbox.com/s/uepiirm0jptgdf7/IMG_20160618_120009.jpg?dl=0
2Din Facia
https://aerpro.com/fp8190
I didn't want to cut up the original wiring harness on the car so I bought the following harness from the Car Joying website. 3 of the plugs were not required for my car and I had to re-wire SWC1 and SWC2 into the correct wires
https://www.carjoying.com/joying-ha...-radio-installation-wiring-harness-cable.html
I also used this 24pin plug for the reverse camera. The Toyota camera uses 5V (not 12v). I had to tap this into the reverse wire in the wiring harness I bought. Like I said earlier, I didn't want to touch the car harness.
http://www.ebay.com.au/itm/272022582406
Picture: https://www.dropbox.com/s/dgb2px1a6jvxnvd/s-l1600.jpg?dl=0
I had to modify the original mounting brackets to remove the locating bumps so that it would fit the new head unit. I don't have pictures of what I did, but you can see the original mounting brackets here: https://www.dropbox.com/s/i9neetzctpu2h7p/IMG_20160618_134150.jpg?dl=0
Here's the finished result
https://www.dropbox.com/s/l13o8quj12ogstj/IMG_20160818_170302.jpg?dl=0
Some items of note with this head unit.
1.) I initially had some issues with install apps from the Play store. Something error about "Cannot install to SDCard or internal memory". I used a paper clip to reset the unit and it seems to have fixed it.
2.) Wireless signal strength is weaker than my older 7" 2Din Android 4.4.4 headunit. My other car has one like this https://www.carjoying.com/2-din-car...th-and-gps-navigation-rotate-menu-hd-800.html and it seems to get faster download speeds and signal strength.
3.) The launcher cannot be changed. You're stuck with 2 options only
4.) The "factory settings password" is 3368 - None of the information documented here - http://forum.xda-developers.com/wiki/Hui_Fei_Type#Factory_Settings_.22Passwords.22 is relevant to this new unit
5.) I much prefer the old menu system. If you watch here https://youtu.be/W-Q3qz0dgd0?t=377 you'll notice a separate app is launched to get to the headunit specific settings. In my other headunit, all these settings are embedded into the normal Android Settings App. This application has a lot of toggles for settings that have lost their translation from Chinese to English. None of toggles are documented so you'll find yourself switching stuff on/off trying to figure out what's changed.
6.) No root Unit can be rooted using Kingoroot. I used an older version but it worked
7.) All things aside, it's actually a very good head unit. I've only had it in for 1 day but it's done everything it's supposed to do
Here are some pictures of the system information
https://www.dropbox.com/s/6crr4toix2r37vw/IMG_20160818_193719.jpg?dl=0
https://www.dropbox.com/s/263m039qdt0mzmh/IMG_20160818_190826.jpg?dl=0

First post updated. I have root

Hi,
my Radio arrived yesterday.....
I've rooted the unit and installed Xposed (Youtube in background, Youtube Adaway, ....)
Everything is working good.
Now I am looking to install a custom Rom on it (DSA Rom)....lets see -> there is a problem with the MCU....its not compatible with the "other" Roms here on XDA

I found this website to have some useful info that is related to this unit
http://4pda.ru/forum/index.php?showtopic=738689&st=180
I used Chrome to auto-translate from Russian to English. It's not perfect, but it's good enough.
The videos here are also somewhat relavant
http://www.witson.com/en/introduce001.html?newsTypeID=100022485&newsType=Video F9XXX Android 4.4
Not sure of the ROMs/MCUs here are relevant, not willing to try yet
https://mega.nz/#F!OlpkjYIR!jHVYotE0fh3FJZKmFX9d7g

Not the same unit as yours, but my Joying has worked like a champ

poyz said:
I ordered this from the CarJoying website.
Here are some pictures of the system information
Click to expand...
Click to collapse
It seems i have the same mcu as you, my radio is a 10.1" screen single din.
Have you got a link that you used to root the device?
Im new to android and its all a bit foreign to me.
Ive just started a thread as i couldn't find any info on my unit and then i found your thread.
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
- be able to play an apps (foxtel go) that says it won't play on a rooted device (if possible)
- increase the amount the screen can dim or be able to turn the screen off
does rooting allow you to change any of the above?
thanks
---------- Post added at 11:28 AM ---------- Previous post was at 11:24 AM ----------
poyz said:
I found this website to have some useful info that is related to this unit
Click to expand...
Click to collapse
how do you change your first link to english?

FR0GGY said:
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
Click to expand...
Click to collapse
get rid of mute in reverse should be easy. Go to Settings and there is an option in there somewhere, I think it is Car Settings. There are options to Mute on reverse, or lower the volume, or just leave it regular. At least that is how my Joying works.
Not sure what you mean by get rid of car picture?

CadillacMike said:
get rid of mute in reverse should be easy. Go to Settings and there is an option in there somewhere, I think it is Car Settings. There are options to Mute on reverse, or lower the volume, or just leave it regular. At least that is how my Joying works.
Not sure what you mean by get rid of car picture?
Click to expand...
Click to collapse
yeah that option is there but it doesn't change anything the mute still works.
unfortunately i can't post links until I'm above 10 posts, seems you can't upload pictures here without a link. But there is a diagram of a car when the reverse camera comes on, I've been able to get rid of the reversing guide lines but not the car picture.

FR0GGY said:
Have you got a link that you used to root the device?
Im new to android and its all a bit foreign to me.
Ive just started a thread as i couldn't find any info on my unit and then i found your thread.
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
- be able to play an apps (foxtel go) that says it won't play on a rooted device (if possible)
- increase the amount the screen can dim or be able to turn the screen off
.
Click to expand...
Click to collapse
If you're new to Android, I suggest you don't root it until you're familiar.
To answer your questions
1.) I've not tried, I like the music muted when I put it in reverse
2.) There is a setting in the Car Media Settings App. I'll find it and update this post
3.) I can't help you there, I don't have Foxtel Go.
4.) There is a Sleep functions in Settings->Display that will allow you to turn the screen off after X minutes of inactivity.

poyz said:
If you're new to Android, I suggest you don't root it until you're familiar.
To answer your questions
1.) I've not tried, I like the music muted when I put it in reverse
2.) There is a setting in the Car Media Settings App. I'll find it and update this post
3.) I can't help you there, I don't have Foxtel Go.
4.) There is a Sleep functions in Settings->Display that will allow you to turn the screen off after X minutes of inactivity.
Click to expand...
Click to collapse
4) yeah I think the minimum is 3 minutes was hoping for something less.

To remove the car picture when you put it in reverse, launch the Car Media Settings app, press the 3rd button from the left on the bottom row of options. Enter 3368 as the password, set the setting "Car Radar" to off.

poyz said:
To remove the car picture when you put it in reverse, launch the Car Media Settings app, press the 3rd button from the left on the bottom row of options. Enter 3368 as the password, set the setting "Car Radar" to off.
Click to expand...
Click to collapse
Thank you, joying actually responded with that today.
Also managed to get the volume working in reverse. There was two settings "reverse mute" or something like that had to be turned off and then there was a mute in reverse setting that had to be set high not low - reverse to what I thought.

Any updates on this unit, recieved my JY-UN138 yesterday
what is it ? MCTB or KYL ?
Looks like the interface for the 4PDA forum is the same but i'm not sure it's the same hardware

D3LTA said:
what is it ? MCTB or KYL ?
Click to expand...
Click to collapse
Neither
According to the system info menu it's JY_60_C6R_7706_5006_CAN(A)_Newlap
See picture https://db.tt/VMWBmyEN

yeah i know that.
Hope there will be some support for them in future
if anyone got a update please post it here

Does that mean, it is currently not possible to update this unit to 5.1.1 with Malaysk ROM? Just thought about ordering this one, but if it is not possible to upgrade to 5.1.1 then probably I will wait...
Also on the Joying page this unit is listed as "PX3 1.8GHz Cortex A9", while most (all?) other units are listed as "RK3188 1.6GHz Cortex A9". Is there a performance difference between these SoCs? What is your boot time with this unit?

Actually the performance is excellent, but indeed it's not upgradable with Android 5.1 now because of total different hardware, unit will die if u try what I have been told.

Official restore
Hello,
had some issues with the unit and seller send me new firmware
Check this and this video for update instructions

Thanks for that. Do you mind taking a picture of the Android version screen of you unit now that you have a different firmware?

Hi,
did you update the unit?
How can I update it? Via recovery?
I have some problems to boot in recovery mode :/
Best regards

Bmw android Screen not showing original menu

Hello all,
I really hope someone could help me out or point into right direction.
I bought a 10 inch CIC android screen from alie and installed it. However the original infotainment system of the car is not showing. Shows just a black screen.
The rest of the android functions seem to work. Car buttons like menu, nav, radio etc, seem to be working but the knob joystick doesn’t work probably also.
When I plug back the original screen, it works just fine.
i read that I need to change the car type in the factory setup, however my unit doesn’t have factory setup menu.
Any idea how to open it? Or could there be another issue?
Thank you guys in advance for any help you can give me
Edit: the seller won’t respond

Not MTCB, have requested Mod moves to Android head units forum, but is unable to move this thread.

Is there not a "Factory" item on your first menu, The password to get in can be 1-3-1-4 But first of all I would double chack you have fitted all the connections properly

Hello ! Can i have a copy of you firmware of the unit? I bricked mine. Thank you.

Hi mate did you manage to get the display working, I’m currently running through the same issue

Same problem on e60 ccc

Did anyone ever sort this issue, i have the exact same issue i cant seem to resolve

I have the exact same issue as well, will report back if found a solution

Hello, i have exact same problem. BMW F11
HMI: BMW.G5.D.Q.F.01.2022.08.10.14.42
There is no option for changing screen resolution. Please report when someone finds solution

Hello sorry for my English I use a translator I find myself with the same problem I installed everything well on my e60 the Android car radio the wheel works but when I go to car info impossible to find the menu to change the screen resolution does not exist I cannot have the original ccc menu I do not know if anyone has found the solution to this problem thank you for your help.

Beto675 said:
Same problem on e60 ccc
Click to expand...
Click to collapse
Hello, you have found a solution to these problems.

duckman60 said:
Hello, you have found a solution to these problems.
Click to expand...
Click to collapse
Change the solution in the menu try all, one of them must be work

I don't understand could you please explain to me in more detail

Beto675 said:
Change the solution in the menu try all, one of them must be work
Click to expand...
Click to collapse
I don't understand could you please explain to me in more detail

duckman60 said:
I don't understand could you please explain to me in more detail
Click to expand...
Click to collapse
You can change the solution look in youtube theres a few tutorials

NAVD-MT049 - reverse camera has No Signal

Hey guys!
I'm hoping you can help me out with some issues I've got with my Android head-unit.
The model is a NAVD-MT049 for an Audi A3.
It's got the reverse cam installed, and for a while now I've been having issues with the video feed.
I've noticed that sometimes when I switch in reverse the camera first displays No Signal, and then after a minute or so it starts working. This happens almost everytime now.
Any tips on what could be the issue?
The wiring is done as it should be, and I've been using it for 3 months now.
Do I need yo get an MCU update?
I've read that on some models this can solve the issue, but I haven't found a website where I have the compatible version for this unit.
Any feedback is welcome!

S13ppy said:
Hey guys!
I'm hoping you can help me out with some issues I've got with my Android head-unit.
The model is a NAVD-MT049 for an Audi A3.
It's got the reverse cam installed, and for a while now I've been having issues with the video feed.
I've noticed that sometimes when I switch in reverse the camera first displays No Signal, and then after a minute or so it starts working. This happens almost everytime now.
Any tips on what could be the issue?
The wiring is done as it should be, and I've been using it for 3 months now.
Do I need yo get an MCU update?
I've read that on some models this can solve the issue, but I haven't found a website where I have the compatible version for this unit.
Any feedback is welcome!
Click to expand...
Click to collapse
Is the head unit an MTCB?

marchnz said:
Is the head unit an MTCB?
Click to expand...
Click to collapse
No, you're right it's not an MTCB, it's a chinese head unit and the MCU is TS907.
Maybe the moderators cand move this post to the correct thread?

S13ppy said:
No, you're right it's not an MTCB, it's a chinese head unit and the MCU is TS907.
Maybe the moderators cand move this post to the correct thread?
Click to expand...
Click to collapse
You'll need to use the report post button to summon a moderator

Adjusting Screen Color Temperature on Dasaita Vivid11 PX6

I recently installed a Dasaita Vivid 11 PX6 Android Head Unit in my car. However, I have noticed the screen is quite blue. The things that should look white look completely blue. Does anyone know how to adjust the screen temperature of the screen? I have checked if there is a setting in "Factory Settings" under 126, however I have not been able to find anything. I have also looked through every setting menu and option, but no dice.
Let me know if there is any more info needed, I would really love to get this figured out. I've searched extensively on this thread for a solution to this so if this has been asked before, I apologize. Regardless, thank you for your help!

Also meant to mention, if there is simply an app that lets me change the white balance, that would work as well.

nbhagat said:
I recently installed a Dasaita Vivid 11 PX6 Android Head Unit in my car. However, I have noticed the screen is quite blue. The things that should look white look completely blue. Does anyone know how to adjust the screen temperature of the screen? I have checked if there is a setting in "Factory Settings" under 126, however I have not been able to find anything. I have also looked through every setting menu and option, but no dice.
Let me know if there is any more info needed, I would really love to get this figured out. I've searched extensively on this thread for a solution to this so if this has been asked before, I apologize. Regardless, thank you for your help!
Click to expand...
Click to collapse
What did reseller suggest when contacted for support?

marchnz said:
What did reseller suggest when contacted for support?
Click to expand...
Click to collapse
I actually emailed them a day before I posted this so I am just waiting on them to get back to me as well. In the meantime, I wanted to see if I could figure it out myself.

nbhagat said:
I actually emailed them a day before I posted this so I am just waiting on them to get back to me as well. In the meantime, I wanted to see if I could figure it out myself.
Click to expand...
Click to collapse
Be sure to check MTCD forums too.