hey guys i have a serious problem with my lenovo a-3000H tablet
the tablet is stuck at lenovo logo and keep restarting over and over and sometimes tool dl image fail appear
i tried to get to recovery mode but the message appear and nothing happens
tried to connect it to my pc to install software .. the tablet keeps connect and disconnect and restart while the software is installed it suddenly disconnect
i hope you can help me guys
same problem here and when trying to flash through SP flash tool it stops and the error is BROM ERROR : S-DA_SDMMC_WRITE_FAILED (3149) without any hint
when i try to flash one by one it stops on system.img, cache.img and userdata.img files then get the same error
can anyone help please?
same problem
i can't connect my tab to my PC and always restarting .. and have error when flash any file or any flashing tools
please help us
hi masters i have a yt2-830l on android 5 want to downgrade to kitkat so i use yt2-830lc kitkat frimware and i goe error and now to tablet shows boot fail.efi hard and jumping to bios screen i can not boot to fastboot any more only i can accses dnx mode tablet detect by flash tool but i try three frimware and i got always error pls help me to unbrick my tablet
Hi,
"tool dl image fail !" this message appear on screen and
i can't connect my tab lenovo a3000-H to my PC and always restarting .. and have error when flash any file or any flashing tools
please help me
Hi everyone,
My zuk doesnt start and it show me only Blue LED and if I plug in to my PC only in recovery mode can i transfer something.it can go into twrp and when i try to flash stock rom ie PAS7FDF rooted it goes to bootanimation and then reboots and again and again.I tried QFIL for both cyanogen Stock ROm and Zui .Zui does boot up but is heating very badly and no radio services what so ever.Right now its on cyanogen from Qfil and i managed to flash twrp . I tried fastboot commands but getting errors like "command Write Failed(No Error) .I can access also "edl mode" and can flash the stock rom again but it doesnt help what can I do? hope someone can help me. thank you in advance PLS HELP
I don't know how to leave well enough alone, and I've been working on the Onn 8" Pro (100003561) tablet trying to at least get root. I managed to unlock the bootloader, but was unable to use SP Flash Tool to dump my own boot.img, so I picked up one I found online that I'm pretty sure is from an older firmware version (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) and now it keeps giving me errors, bluetooth crashing, etc, even after a factory restore from the recovery.
I CANNOT get SP Flash Tool to load the scatter file that deadman was using in his comment (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) it just gives me an invalid scatter file error. I just want it back to factory, start all over, but no matter what I do I can't figure out how to flash deadman's firmware file, or ANY firmware backup for that matter. I keep getting scatter file errors, and SP Flash doesn't even wanna find my device. I've got the drivers installed properly, it shows up as "MediaTek PreLoader USB VCOM (Android) (COM3)" in my device manager. I've tried changing the COM port, running the flash tool in compatibility mode for Windows 7 (I'm on Windows 11 btw) running it as admin, and nothing. I can get an empty scatter file from WWR 2.51 to load in flash tool, but when I plug my device in it just does nothing. If I unplug my device, it gives an error that says "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)".
I can get into fastboot mode, but I can't open the settings in the normal boot because it instantly crashes to the ONN boot logo whenever I open anything. I'm at a complete loss here.
sethfoxen said:
I don't know how to leave well enough alone, and I've been working on the Onn 8" Pro (100003561) tablet trying to at least get root. I managed to unlock the bootloader, but was unable to use SP Flash Tool to dump my own boot.img, so I picked up one I found online that I'm pretty sure is from an older firmware version (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) and now it keeps giving me errors, bluetooth crashing, etc, even after a factory restore from the recovery.
I CANNOT get SP Flash Tool to load the scatter file that deadman was using in his comment (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) it just gives me an invalid scatter file error. I just want it back to factory, start all over, but no matter what I do I can't figure out how to flash deadman's firmware file, or ANY firmware backup for that matter. I keep getting scatter file errors, and SP Flash doesn't even wanna find my device. I've got the drivers installed properly, it shows up as "MediaTek PreLoader USB VCOM (Android) (COM3)" in my device manager. I've tried changing the COM port, running the flash tool in compatibility mode for Windows 7 (I'm on Windows 11 btw) running it as admin, and nothing. I can get an empty scatter file from WWR 2.51 to load in flash tool, but when I plug my device in it just does nothing. If I unplug my device, it gives an error that says "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)".
I can get into fastboot mode, but I can't open the settings in the normal boot because it instantly crashes to the ONN boot logo whenever I open anything. I'm at a complete loss here.
Click to expand...
Click to collapse
Ugh, I feel so stupid. I FINALLY got SP Flash to recognise my device, by FOLLOWING THE DIRECTIONS :eyeroll:
So yes, you DO have to tear the back off of the tablet, and unhook the battery before you can do anything.