hi masters i have a yt2-830l on android 5 want to downgrade to kitkat so i use yt2-830lc kitkat frimware and i goe error and now to tablet shows boot fail.efi hard and jumping to bios screen i can not boot to fastboot any more only i can accses dnx mode tablet detect by flash tool but i try three frimware and i got always error pls help me to unbrick my tablet
Related
hey guys I have a lg e445 somewhat soft brick
it stuck in boot loop no recovery no fastboot
only I can go into download mode
but I have tried to flash with lg support tool, lg software updater etc.
when flashing started it goes to 4% to 5% and then says phone not found
so I want to ask you people
since this phone has a mediate (mtk6575) processor can I flash it with spflash tool
if yes then where I go to download firmware files to be used in sp flash tool
if no then what I have to do to revive phone again
note:- in past I have successfully recover this phone from soft brick 2 times. but this times problem level is little bit high.
help me.....
hey guys i have a serious problem with my lenovo a-3000H tablet
the tablet is stuck at lenovo logo and keep restarting over and over and sometimes tool dl image fail appear
i tried to get to recovery mode but the message appear and nothing happens
tried to connect it to my pc to install software .. the tablet keeps connect and disconnect and restart while the software is installed it suddenly disconnect
i hope you can help me guys
same problem here and when trying to flash through SP flash tool it stops and the error is BROM ERROR : S-DA_SDMMC_WRITE_FAILED (3149) without any hint
when i try to flash one by one it stops on system.img, cache.img and userdata.img files then get the same error
can anyone help please?
same problem
i can't connect my tab to my PC and always restarting .. and have error when flash any file or any flashing tools
please help us
Hi everyone,
My zuk doesnt start and it show me only Blue LED and if I plug in to my PC only in recovery mode can i transfer something.it can go into twrp and when i try to flash stock rom ie PAS7FDF rooted it goes to bootanimation and then reboots and again and again.I tried QFIL for both cyanogen Stock ROm and Zui .Zui does boot up but is heating very badly and no radio services what so ever.Right now its on cyanogen from Qfil and i managed to flash twrp . I tried fastboot commands but getting errors like "command Write Failed(No Error) .I can access also "edl mode" and can flash the stock rom again but it doesnt help what can I do? hope someone can help me. thank you in advance PLS HELP
- hello people, i have a zte axon7 a2017g , stock rom oreo , i tried to flash Android 7.1 , many roms _full edl naugat and oreo to unlock bootloader because i want to develop things for it. As of now, I can't boot into phone( system), can't get into edl mode with button combination but, i can go into dfu mode and use a tool to go in edl mode. So please help me.. i have tried miflash, multidl tool, and may other tools they give me error of firehose , or sahara protocol . i have only dfu mode then i can go by sa tool of diijkuz tool automaically to edl mode , but everytime i flashed a rom told me failure , just the first time succeed but stuck on logo screen then wheni flash it told me failure .
Have you tried to completely drain the battery?
Hi friend:
If you drain the battery completely it will be easy to enter edl.
You can use edl tools to unlock the bootloader.
What I would do would be once you have the battery drained, connect the pc and flash a stock edl nougat rom.
Once flashed and started the rom, it will be easy to unlock the bootloader, put twrp and install what you want
totmakina said:
Have you tried to completely drain the battery?
Hi friend:
If you drain the battery completely it will be easy to enter edl.
You can use edl tools to unlock the bootloader.
What I would do would be once you have the battery drained, connect the pc and flash a stock edl nougat rom.
Once flashed and started the rom, it will be easy to unlock the bootloader, put twrp and install what you want
Click to expand...
Click to collapse
Thanks for your response !!!!
yes i tried with drain batteri two times but no progress , it's just on naugat rom and stuck on logo , i tried also to unloack bootloader , it told me unloacked on the edl tool but when i boot on bootloader , the state is locked , may be because the rom naugat not flash correctly , or because it'stuck on logo .
i try with naugat b12_Full edl ,oreo b02 _fulledl , , but it told me failed this time otherwise at first naugat _b12_full edl say successfully done.
now i just can make phone on dfu mode and try with the edl tool of dijkiz to go automaticlly to edl mode and flash , but it told me failed flashing .
what i should do then !!! can u recommend to me a stock rom naugat and give me a link about it , i can flash it with edl tool and how i can directly go to edl mode because now i just have dfu mode then i use a version of edl tool make me go directly to edl mode but may be it's not work fine !!!
Ps : My problem is that am stuck on logo after downgrading from stock rom oreo b02 to naugat , shoyuld i search about a boot recovery to flash boot and boot in system or if ther is another tools or rom can i use them to solve my problem
(' sorry for my bad english )
hello guys, I have a lenovo tab m10 x306f tablet, I tried to flash it to change the android and it bricked, I recovered it with the lenovo recovery tool, but now it gives me this message and if I don't press on 4 seconds it doesn't come up, android , I tried flashing with spflash and it gives me this error, I changed PC, windows, and the same error, could someone help me please, since it is my work tool, thanks
when i try to sp flash give this error
error status brom cmd send da fail 0xc006003
i change lot windows and same error with sp , and change different version and same thanx
What did you flash? Can you boot into fastboot, bootloader, or recovery?