hi there.i have a tb x306x from school and they using surelock apps.it was for children in school.and now there is no use for it and i want to use it personally.so i tried to format it by going throw the recovery boot when turn off the tablet pressing power and volume + etc.. but there was no recovery option appear.i just go to a black screen sometime and there is one word " meta mode " and i can do nothing with it...
then i tried to flashing it with sp flash tools after geting the usb driver and the stock rom for it but the phone not accepting the flashing.tried the Rescue and Smart Assistant program too and no luck....
is there any way to get recovery boot works? or how i can reflash it with the stock rom?or if i can remove the surelock apps ( i dont have its password).thanks
or what i can do for the taplet when its in the "meta mode" ?
i forget to say that its running android 11
hooooossamq said:
hi there.i have a tb x306x from school and they using surelock apps.it was for children in school.and now there is no use for it and i want to use it personally.so i tried to format it by going throw the recovery boot when turn off the tablet pressing power and volume + etc.. but there was no recovery option appear.i just go to a black screen sometime and there is one word " meta mode " and i can do nothing with it...
then i tried to flashing it with sp flash tools after geting the usb driver and the stock rom for it but the phone not accepting the flashing.tried the Rescue and Smart Assistant program too and no luck....
is there any way to get recovery boot works? or how i can reflash it with the stock rom?or if i can remove the surelock apps ( i dont have its password).thanks
Click to expand...
Click to collapse
Hello Hossam
I face the same issue and the same case
can you please tell me what can I do or any hints please
Ali.Hajaya said:
Hello Hossam
I face the same issue and the same case
can you please tell me what can I do or any hints please
Click to expand...
Click to collapse
I finally send it for lenivo customer service.and they fix it for me
it has recovery mode you can enter with adb reboot recovery
Related
heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..
Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.
ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!
but i didnt came anymore to the homescreen , or lock screen
Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App
The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk
Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App
THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?
Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk
THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((
You are very welcome
sent using tapatalk
I am so confused .
Im very new to messing around with phones... yes you can call me a super super NOOB
my phone was already rooted and was running a
miui rom (Elite.ROM.v9.7.FIXED.with.Galnet.by.TerraMino_2012-02-18)
(oxygen2.2.2-u8800-test-110914)
i wanted to change it and tried to update CWM coz it was running an older version something like 5.0.---
i installed the file b518 and when i restarted my phone the phone got stuck in a boot loop.....
I can not access CWM
my phone does not come on and is in a boot loop
the only thing i can access now is the pink screen which i can view the image folder
Before this i had made a copy of my whole SD card on the computer...
so if n e files are required i can access it.
I have the zip files that are listed above
PLEASE HELP ME .....[/I][/B]
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
hmm..try it:
go to in pinkscreen, connect phone to pc via usb and replace recovery to custom; boot in recovery (power+vol.up), wipe all (data/factory reset) and try to boot phone.. or install another rom in recovery
TheJoker0 said:
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
Click to expand...
Click to collapse
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
sudhodhan said:
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
Click to expand...
Click to collapse
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
some one please help me
sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
forumber2 said:
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
Click to expand...
Click to collapse
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
sudhodhan said:
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
Click to expand...
Click to collapse
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
forumber2 said:
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
Click to expand...
Click to collapse
hey thanks a lot i i got it back to the stock version
feels awsome to have sorted this nonsense....
big headache gone..... i dont know if i wanna mess around and upgrade it again... lol
Any help PLEASE! How did you do it?
Hi everyone,
Firstly let me thank anyone reading this in advance! Secondly let me extra thank anyone who helps me in advance!
Sudhodhan. How did you fix your phone?
I rooted my phone. Then I copied a new boot.img file into './cus_backup/image' directory and now the phone wont boot. It just keeps rebooting. I've looked through this forum but cant seem to find an answer. People with similar problems but not exactly the same.
When I go into the pink screen I cannot see the recovery image folder when I pug the USB from phone to computer.
My phone has android 2.3.5.
I cannot access the clockwork recovery mode (by holding power + vol up) it doesn't work anymore or at all?
I have Ubuntu and Xp on my computer.
When I connect phone to computer (while in the pick screen) ubuntu recognises a huwei device attached but adb does not see it. previously adb would see the device.
However when I let the phone keep rebooting endlessly there are moments when adb sees the phone. I have even opened a shell in adb on the device for a little while. but when I did I could not see any hidden directories or the './cust_backup/image' directory. I tried to push the original boot.img file over but that did not work either!
I am stuck.
If I could see the image directory while phone was in the pink screen I could copy original boot.img.
Any suggestions!
Cheers
Hi Koffs,
First check if your phone is U8800 and not a variant like U8800-Pro (+), U8800-51 or U8800-H.
In the case you have a regular U8800 I would suggest you install a stock rom.
For now I recommend B518, find here the link:
http://www.mediafire.com/download/p...1_(Beta1.0)(Overseas_Normal)(Gingerbread).zip
I rooted my phone and it was successful then i used "eris market fix" then it says i need to restart and then my phone was stuck into boot logo sorry for bad english
iamjustincute said:
I rooted my phone and it was successful then i used "eris market fix" then it says i need to restart and then my phone was stuck into boot logo sorry for bad english
Click to expand...
Click to collapse
How can i make my phone work again need help pleeaaase ((((
U need to go into recovery mode by powering off your phone then keep your fingers on volume up and power. Power botton should be the last key. (Even when the phone turn on dont release the botton until u go into a black screen with som writing) when u are in recover mode use volume up snd down keys to navigate to factory reset then use power key to select it then scroll down to yes then use power to select it then wait until everything is over then reboot the phone.
Sent from my ONE TOUCH 4033A using XDA Free mobile app
Help! Formatted my bootloader
Please Help!... i have a Dl700, pop c3 4033A i'm in jamaica and i got it from digicel. i managed to root the phone but bricked it after. i found a stock rom ans tried to flash it with the flash tool and i keep getting BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail i found a forum that said i should format with the flash tool and try again but i did a whole flash and deleted my bootloader. now its just black screen and the computer only recognizes it without its batteries and as a mtk device which keeps disconnecting and reconnecting. plz help its the only phone i have i was just too curious i guess
same problem here
Hey guys,
So recently I got a SM-G928X Live Demo Unit. I just read that flashing G928F firmware is completely fine and so I did aaaaand well, I am stuck in recover. Forgot to flash a custom recovery, also the phone has Factory Reset Protection so I am here with:
Android Recovery
MMB29K.G928FXXU2BPB6
samsung/zenbltexx/zenlte
6.0.1/MMB29K/G928FXXU2BPB6
user/release-keys
volume up/down and power
____________________
then goes normal recovery options
and at the bottom of the screen, there's
Supported API: 3
dm-verity verification failed...
Need to check DRK first...
Anyway I can't get to download mode, cant wipe data, cant flash from ADB/SD Card. When connected to PC no software recognises the device so yeah, that's a great situation to be in, right?
So if any of you have any idea how to make this thingy work again, I'm up for anything.
Thanks
Drasta1 said:
Hey guys,
So recently I got a SM-G928X Live Demo Unit. I just read that flashing G928F firmware is completely fine and so I did aaaaand well, I am stuck in recover. Forgot to flash a custom recovery, also the phone has Factory Reset Protection so I am here with:
Android Recovery
MMB29K.G928FXXU2BPB6
samsung/zenbltexx/zenlte
6.0.1/MMB29K/G928FXXU2BPB6
user/release-keys
volume up/down and power
____________________
then goes normal recovery options
and at the bottom of the screen, there's
Supported API: 3
dm-verity verification failed...
Need to check DRK first...
Anyway I can't get to download mode, cant wipe data, cant flash from ADB/SD Card. When connected to PC no software recognises the device so yeah, that's a great situation to be in, right?
So if any of you have any idea how to make this thingy work again, I'm up for anything.
Thanks
Click to expand...
Click to collapse
Hey, how comes you can not get into download mode? In case; do you know how to get into DL mode with the button combination?
Konsstantine34 said:
Hey, how comes you can not get into download mode? In case; do you know how to get into DL mode with the button combination?
Click to expand...
Click to collapse
Thing is there is this FRP thing and since I flashed a stock ROM it somehow blocks it from reseting the phone and even if I try to boot to download mode thru the button comb or thru the recovery, it just resets the phone and then boots to recovery immediately. Also this thing is preventing me from flashing anything from the SD card or ADB.
Drasta1 said:
Thing is there is this FRP thing and since I flashed a stock ROM it somehow blocks it from reseting the phone and even if I try to boot to download mode thru the button comb or thru the recovery, it just resets the phone and then boots to recovery immediately. Also this thing is preventing me from flashing anything from the SD card or ADB.
Click to expand...
Click to collapse
The guys were avoiding this issue by flashing the firmware. Since you can't boot into DL mode, that's odd. Maybe smart switch(or whatever it's name) helps. As far as i remember this lock is related with ''OEM Unlock'' in Settings » Developer options. Also there were some tricks around which you should research it at xda or youtube. Good luck.
Konsstantine34 said:
The guys were avoiding this issue by flashing the firmware. Since you can't boot into DL mode, that's odd. Maybe smart switch(or whatever it's name) helps. As far as i remember this lock is related with ''OEM Unlock'' in Settings » Developer options. Also there were some tricks around which you should research it at xda or youtube. Good luck.
Click to expand...
Click to collapse
I had no problem getting into DL mode but then I flashed the stock firmaware for G928F because I found here on XDA that it is completely fine flashing it onto G928X and since then it just boots to recovery and everything else just doesnt work. Pitty. Will try the USB JIG thing and will see..
hi
just flash in odin cf-autoroot
from recovery dont go to bootloader go to powerdown first
i had similar problem with LDU
---------- Post added 18th October 2016 at 12:09 AM ---------- Previous post was 17th October 2016 at 11:58 PM ----------
if cant put in dowwnload mode that way tray to push volume down+power off butons
after 15 sec or more screen goes off quickly push + home buton
sorrry for bad english
Hi guys,
I just found my old Alcatel Pop C7 on my closet and decided to give a try and fix it.
It's essentially soft-bricked. I can access recovery mode, but it doens't get past the logo. Probably worth mentioning the phone is not rooted.
Tried to flash a new room but for some reason it doesn't detect my phone whenever I try to download with SP Flash Tool.
Could you guys give me some good news? :x
dannyinside said:
Hi guys,
I just found my old Alcatel Pop C7 on my closet and decided to give a try and fix it.
It's essentially soft-bricked. I can access recovery mode, but it doens't get past the logo. Probably worth mentioning the phone is not rooted.
Tried to flash a new room but for some reason it doesn't detect my phone whenever I try to download with SP Flash Tool.
Could you guys give me some good news? :x
Click to expand...
Click to collapse
No, your Android not completely dead. Dead android means no fastboot, no recovery, not booting by anyways.
Have tried booting your android in meta mode and then connect to SP flash tool.
Ashwinrg said:
No, your Android not completely dead. Dead android means no fastboot, no recovery, not booting by anyways.
Have tried booting your android in meta mode and then connect to SP flash tool.
Click to expand...
Click to collapse
I have not tried, as I don't know how to do it. Tried power+volume+ and power+volume- and they both take me to system recovery mode
dannyinside said:
I have not tried, as I don't know how to do it. Tried power+volume+ and power+volume- and they both take me to system recovery mode
Click to expand...
Click to collapse
Try to press power plus both volume keys and see.
Ashwinrg said:
Try to press power plus both volume keys and see.
Click to expand...
Click to collapse
Same things happen unfortunately
Keeps going to recovery mode. If I'm not being too intrusive ,could you chat with me here in discord : discord.gg/Msj48au? ( other people feel encouraged to come also )
dannyinside said:
Same things happen unfortunately
Keeps going to recovery mode. If I'm not being too intrusive ,could you chat with me here in discord : discord.gg/Msj48au? ( other people feel encouraged to come also )
Click to expand...
Click to collapse
Which recovery you have. I mean TWRP,cwm,philz
Ashwinrg said:
Which recovery you have. I mean TWRP,cwm,philz
Click to expand...
Click to collapse
hmm android system recovery <3e>. That's what it shows :/
dannyinside said:
hmm android system recovery . That's what it shows :/
Click to expand...
Click to collapse
It's stock recovery. Try home + power+ volume down or volume up combination to enter in fastboot mode or meta mode.