Related
Just wondering if there is a way to flash the stock v20 camera into a rom or if there is a rom that uses the stock v20 camera. im missing the dual camera and the slow motion capabilities!. thanks
stunter4ever said:
Just wondering if there is a way to flash the stock v20 camera into a rom or if there is a rom that uses the stock v20 camera. im missing the dual camera and the slow motion capabilities!. thanks
Click to expand...
Click to collapse
What are you talking about....
All ROMs have the stock LG Camera app... Minus the AOSP ROMs, which will not have it, just the stock Google camera.
Tilde88 said:
What are you talking about....
All ROMs have the stock LG Camera app... Minus the AOSP ROMs, which will not have it, just the stock Google camera.
Click to expand...
Click to collapse
i guess that answers my question. i had no luck flashing anything other than AOKP. everything else just sat on the boot screen for an hour.
stunter4ever said:
i guess that answers my question. i had no luck flashing anything other than AOKP. everything else just sat on the boot screen for an hour.
Click to expand...
Click to collapse
This means one of two things. You are not flashing supersu on top of the ROM (most ROMs should be flashing it for you-- like mine). Any time you introduce a boot.img, it must be accompanied by a supersu flash. The kernels get patched by the SuperSU updater to be insecure, and disable verity.
Or, you simply did not decrypt data as instructed to do so. Good luck.
Sounds like you never flashed one of my ROMs...
Tilde88 said:
This means one of two things. You are not flashing supersu on top of the ROM (most ROMs should be flashing it for you-- like mine). Any time you introduce a boot.img, it must be accompanied by a supersu flash. The kernels get patched by the SuperSU updater to be insecure, and disable verity.
Or, you simply did not decrypt data as instructed to do so. Good luck.
Sounds like you never flashed one of my ROMs...
Click to expand...
Click to collapse
I tried flashing WETA and followed the instructions. still no go. wiped data and started clean. ill try again.
UPDATE:..... everything worked fine this time. not sure why. Thanks again for the help!
Hi there. I am kinda new on these things.
I am at my home right now. I have the time to backup everything.
I am on stock right now , I have started getting a bit of lags here and there.
Should I root and install a custom rom?
And if yes , what is the best combination of kernel and rom for the best performance and battery.
Akshatk said:
Hi there. I am kinda new on these things.
I am at my home right now. I have the time to backup everything.
I am on stock right now , I have started getting a bit of lags here and there.
Should I root and install a custom rom?
And if yes , what is the best combination of kernel and rom for the best performance and battery.
Click to expand...
Click to collapse
DO NOT INSTALL CUSTOM ROM, if you have to ask that question.
On a serious note, a factory reset will take care of all lags.Rooting is for those who have a spare phone,want to play around and can afford brick sooner or later. Moto has determined stock to be best for all others.
pradyot said:
DO NOT INSTALL CUSTOM ROM, if you have to ask that question.
On a serious note, a factory reset will take care of all lags.Rooting is for those who have a spare phone,want to play around and can afford brick sooner or later. Moto has determined stock to be best for all others.
Click to expand...
Click to collapse
I am not so new dude. I have installed custom roms many a times..on my canvas a1.
On that device , it was good bcoz the device itself wasn't so good.
But this moto g5 plus is a nice phone. That's why I'm asking whether i should install custom rom or not
Akshatk said:
I am not so new dude. I have installed custom roms many a times..on my canvas a1.
On that device , it was good bcoz the device itself wasn't so good.
But this moto g5 plus is a nice phone. That's why I'm asking whether i should install custom rom or not
Click to expand...
Click to collapse
Acknowledged !! and my apologies.
Rooting and custom roms work well on MotoG+.On some of the latest Oreo roms I was playing around with in the past couple of months,the camera app broke more often than once.If you can live with that in exchange for performance, LineageOS 15 and Pixel Experience roms worked great.
But as with any phone, you have to play around for the best of latest or for stability.
Just my two cents .
pradyot said:
Acknowledged !! and my apologies.
Rooting and custom roms work well on MotoG+.On some of the latest Oreo roms I was playing around with in the past couple of months,the camera app broke more often than once.If you can live with that in exchange for performance, LineageOS 15 and Pixel Experience roms worked great.
But as with any phone, you have to play around for the best of latest or for stability.
Just my two cents .
Click to expand...
Click to collapse
What about the battery life?
Can i use greenify etc with these roms?
Thanks for the reply
Install only if a stock firmware higher or equivalent to your current version is available. Else you will not be able to go back to stock. If you attempt to downgrade you will run into problems with bootloaders.
Akshatk said:
What about the battery life?
Can i use greenify etc with these roms?
Thanks for the reply
Click to expand...
Click to collapse
Battery life is pretty good on the custom rom side. All updated ROMs are now Android 8.1 and are 64 bit. I usually get 6-7+ hours screen on time and switch between every rom that's released For battery and customizations I recommend AEX or Validius. Also, you can use greenify on any of the custom ROMs and root with magisk and pass safety net as well. I Also recommend you download from telegram group as those links are updated more often than xda.
Telegram links are:
t.me/g5pluslinks ---> All new ROMs released no chat
t.me/motog5plus ---> Release of new ROMs / kernels but lot of chat too.
t.me/MotoG5PlusStuff ---> Collection of all kinds of camera apps.
Too late. I failed to root. And now my camera doesn't work. :Cries:
Gonna try flashing stock (some 92 version ) which has the Nov patch. Older one failed(downgrade).
Help me if you can. PLEASE.
I can explain everything I did.
Too late. I failed to root. And now my camera doesn't work. :Cries:
Gonna try flashing stock (some 92 version ) which has the Nov patch. Older one failed(downgrade).
Help me if you can. PLEASE.
I can explain everything I did.
Ok guys. So..i somehow got the root to work. But the camera is not working. It is saying camera is busy . What should I do?
Akshatk said:
Ok guys. So..i somehow got the root to work. But the camera is not working. It is saying camera is busy . What should I do?
Click to expand...
Click to collapse
I believe that using custom kernel was the fix to that issue, not 100% sure as I never had the issue myself. Also, if you decide to go to a custom rom you won't have that issue (it only affects stock rom). Another option if you want to stick on stock is find the thread on here for TWRP flashable stock ROMs and use latest one for your phone.
I'm not able to select SD card storage in the recovery mode. What's the issue here? How do I fix it?
Akshatk said:
I'm not able to select SD card storage in the recovery mode. What's the issue here? How do I fix it?
Click to expand...
Click to collapse
nevermind. I updated twrp to 3.2.1.0 . Now i can use my sd card there.
jeffsga88 said:
I believe that using custom kernel was the fix to that issue, not 100% sure as I never had the issue myself. Also, if you decide to go to a custom rom you won't have that issue (it only affects stock rom). Another option if you want to stick on stock is find the thread on here for TWRP flashable stock ROMs and use latest one for your phone.
Click to expand...
Click to collapse
I installed lineage 14.1.
I have no issues now.
Thanks bro!
Akshatk said:
I installed lineage 14.1.
I have no issues now.
Thanks bro!
Click to expand...
Click to collapse
No problem. Happy I could help.
On Custom Oreo ROMs/kernels such Renovate ICE O, Batman ROM, Nox Kernel, notorious kernel , Wifi does not work on my S8 G950F. The only way to make these work up to now, was to restore the boot image from stock rom.
Whilst restoring stock boot.img does resolve the issue, it creates another in that after reboot wifi takes about 2 mins to turn on.
This Solution Worked for me, but doesn't always work for everyone, try it:
https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/kernel-nox-kernel-v1-t3721469/page18post 174
can you give the link for stock boot.img?
Uz986 said:
can you give the link for stock boot.img?
Click to expand...
Click to collapse
the stock boot is one you would take from twrp, or if you don't have that can install soldier rom, skip all the install options, then just backup boot in twrp
I have very kindly been given a temp fix by @Noxxxious who makes the truly excellent Nox kernel. Will update as this develops & hopefully share a perm fix for everyone
Same
I have the same Problem with my s8 in every custom Rom since oreo i cant Turn in my wifi..
Rb0 said:
I have the same Problem with my s8 in every custom Rom since oreo i cant Turn in my wifi..
Click to expand...
Click to collapse
have a look here https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/kernel-nox-kernel-v1-t3721469/page18
Post 174. This worked for me now I have wifi on all custom roms
Thought I’d chile in here as well so people learn this problem is for real, and that I know how to flash custom roms....
I am always doing the boot.img trick that @StackOverflow13 taught me a white a go.
meonit said:
Thought I’d chile in here as well so people learn this problem is for real, and that I know how to flash custom roms....
I am always doing the boot.img trick that @StackOverflow13 taught me a white a go.
Click to expand...
Click to collapse
I take it the 2 files trick didn't work for you? So are you facing the issue of really slow WiFi start-up after reboot? Glad your here anyway. The more people we get the more chance a dev or devs will take notice
Still dealing with this in 2020. I'm using a Japanese S8+ with stock Oreo firmware and a custom kernel, the second I flash Magisk and my boot image gets replaced, WiFi breaks. I checked the file directory mentioned in post 174 and I see both files are present on my phone, unless the files @noxxious posted are modified in some way.
Hello again all!
So I've recently discovered the glory of GSI / Treble roms! Good stuff! But after much banter with Ressurection remix's 9.0 GSI rom, I have still yet to get it working, and wasn't sure if I'm just missing something.
So far, what I've tried is:
- Wiping everything (caches, system, data) as well as formatting my data partition
- then installing the rom. after a couple of routine-looking reboots, the system boots without gapps functioning great.
- quick settings states 'No SIM card', which is false
- reinstalled rom countless times
- restored to functioning rom, backed up EFS, reinstalled RRemix in the same fashion, restored EFS backup. No solve there.
And with that, I'm out of ideas and without much knowledge of GSI / Treble processes, I'm not even sure how to word searches for help. Any advice ya'll?
Hey man, let me know if you still haven’t gotten this resolved and are still looking to do so. After days of research and experimentation I finally created a process to reliably flash a fully functional RR 7.X rom. I can provide my boot.img and instructions if you need them.
Derbyy said:
Hey man, let me know if you still haven’t gotten this resolved and are still looking to do so. After days of research and experimentation I finally created a process to reliably flash a fully functional RR 7.X rom. I can provide my boot.img and instructions if you need them.
Click to expand...
Click to collapse
I'm interested in this for sure. I'm curious, are you guys using the A only IMG of treble ROMs?
jal3223 said:
I'm interested in this for sure. I'm curious, are you guys using the A only IMG of treble ROMs?
Click to expand...
Click to collapse
It’s funny you should reply to me on today of all days. This morning, after a month of testing, I finally succeeded in getting my RP2 to A/B boot RR 7, TWRP, AND have it rooted with Magisk. I couldn’t believe I finally got it. AMA
Are any of you on Verizon? I've tried multiple GSIs and have never gotten LTE to work properly.
Reznor7 said:
Are any of you on Verizon? I've tried multiple GSIs and have never gotten LTE to work properly.
Click to expand...
Click to collapse
Did you try an A only image? It should work as it doesn't touch the vendor image or CSC. At first I was trying AB images on my Note 9 and could never get signal. I found out that we are only supposed to use the A only images on that device and my problems were solved. I haven't tried anything on my Razer Phone 2 though as the stock ROM is pretty much exactly what I want. It's worth a try.
Need RR help.
Derbyy said:
Hey man, let me know if you still haven’t gotten this resolved and are still looking to do so. After days of research and experimentation I finally created a process to reliably flash a fully functional RR 7.X rom. I can provide my boot.img and instructions if you need them.
Click to expand...
Click to collapse
Hey, can I get that boot.img and instructions if you can still provide them? I want to install r.r 7.x please. Sorry for messaging you 4 months later.
jal3223 said:
Did you try an A only image? It should work as it doesn't touch the vendor image or CSC. At first I was trying AB images on my Note 9 and could never get signal. I found out that we are only supposed to use the A only images on that device and my problems were solved. I haven't tried anything on my Razer Phone 2 though as the stock ROM is pretty much exactly what I want. It's worth a try.
Click to expand...
Click to collapse
sorry to disturb you years later,but why not try to flash another gsi like crdroid,boot into it and flash you rr rom back?
this strange method worked on my redmi 10a
Fingerprint option missing in "Security" settings after flashing custom ROMs
Hello! I'm trying to install custom ROMs on my OnePlus 8 Pro (IN2020) and have the problem with fingerprint sensor: when I'm using stock firmwares (A10/11, MSM/fastboot) or GSI (kernel doesn't matter), I have an option in "Security" with ability of using fingerprints. But when I'm flashing any custom ROM, I have an option disappeared. I've tried restoring my persist partition, tried kernels from various authors (even CleanSlate 1.2.7 with special fingerprint fix), tried not using Magisk and so on. Nothing helps. I guess there can be different types of fingerprint sensor hardware on our phones, so drivers required. Dev's help will be appreciated, also I'm ready to test and send any info needed. Thanks in advance!
Very common issue, run through the fix persist img position problem thread, at least ask in there.
Bare in mind that custom ROMs like GSI's do not have fingerprint functionality, it allows you to create data but not to use it.
Easy Solution,
MSM to Android 11.
dladz said:
Very common issue, run through the fix persist img position problem thread, at least ask in there.
Bare in mind that custom ROMs like GSI's do not have fingerprint functionality, it allows you to create data but not to use it.
Click to expand...
Click to collapse
I don't think you've read it quite right. I tried fixing persist partition, also GSI ROMs have the fingerprint option for me.
IronSingh said:
Easy Solution,
MSM to Android 11.
Click to expand...
Click to collapse
How can I flash custom ROMs after flashing A11 MSM??? Sounds impossible for me.
Welld1s said:
I don't think you've read it quite right. I tried fixing persist partition, also GSI ROMs have the fingerprint option for me.
Click to expand...
Click to collapse
I've read that the option is there but after enrollment it fails to function.
So you've been through the persist fix?? Have you asked in that said thread?! There's a tonne of people who have had this issue and have got it fixed.
I'm sure they'll know what to do with it
dladz said:
I've read that the option is there but after enrollment it fails to function.
So you've been through the persist fix?? Have you asked in that said thread?! There's a tonne of people who have had this issue and have got it fixed.
I'm sure they'll know what to do with it
Click to expand...
Click to collapse
There is a difference in our situations: their enrollment is failed, but I don't see an option at all. Like the driver or device is not found, so Android thinks I don't have a fingerprint scanner. Tried the persist fix, yes. I'm not a total noob in here, been ROM addict from Samsung S3 stuff I think the problem is we have another fingerprint scanner hardware with different driver needed on some instantnoodlep devices.
Welld1s said:
There is a difference in our situations: their enrollment is failed, but I don't see an option at all. Like the driver or device is not found, so Android thinks I don't have a fingerprint scanner. Tried the persist fix, yes. I'm not a total noob in here, been ROM addict from Samsung S3 stuff I think the problem is we have another fingerprint scanner hardware with different driver needed on some instantnoodlep devices.
Click to expand...
Click to collapse
I know mate, but that's the only thing I could suggest, the GSI and the OOS issues were always different.
Have you changed firmwares, like from regional to global?
I think it would at least be with talking to the person who came up with the persist fix as they obviously know a lot more about this specific issue.
I highly doubt that the hardware is broken.
Not suggesting you're a noob either, just suggesting you've missed something potentially, that could happen to anyone.
Personally I don't know how to fix it as I've never had they issue.
Good luck with it.
dladz said:
I know mate, but that's the only thing I could suggest, the GSI and the OOS issues were always different.
Have you changed firmwares, like from regional to global?
I think it would at least be with talking to the person who came up with the persist fix as they obviously know a lot more about this specific issue.
I highly doubt that the hardware is broken.
Not suggesting you're a noob either, just suggesting you've missed something potentially, that could happen to anyone.
Personally I don't know how to fix it as I've never had they issue.
Good luck with it.
Click to expand...
Click to collapse
I'm not telling you that hardware is broken, I think that hardware is different, because I've read something similar from people who has newer devices.
Welld1s said:
I'm not telling you that hardware is broken, I think that hardware is different, because I've read something similar from people who has newer devices.
Click to expand...
Click to collapse
Right ok, well good luck with that pal.
v.is.for.vladdy said:
Hello! I'm trying to install custom ROMs on my OnePlus 8 Pro (IN2020) and have the problem with fingerprint sensor: when I'm using stock firmwares (A10/11, MSM/fastboot) or GSI (kernel doesn't matter), I have an option in "Security" with ability of using fingerprints. But when I'm flashing any custom ROM, I have an option disappeared. I've tried restoring my persist partition, tried kernels from various authors (even CleanSlate 1.2.7 with special fingerprint fix), tried not using Magisk and so on. Nothing helps. I guess there can be different types of fingerprint sensor hardware on our phones, so drivers required. Dev's help will be appreciated, also I'm ready to test and send any info needed. Thanks in advance!
Click to expand...
Click to collapse
Bro on my op 8 pro my fp option is also missing if u got anything thats works for you pls let me know I'm using my device without fp and it's been 25 days plus... I'm not happy with face unlock..
Bdw i tried fix persist img and msm tool nothing working for me if u got anything brother let me know ... I cant RDA my device no customer service in my city.
Just curious...you're both on 11 right?
The persist fix I believe was originally intended for Android 10 (I know that's when it came out)
My point being, would it be worth downgrading to 10 then running the through the fix?
dladz said:
Just curious...you're both on 11 right?
The persist fix I believe was originally intended for Android 10 (I know that's when it came out)
My point being, would it be worth downgrading to 10 then running the through the fix?
Click to expand...
Click to collapse
Sir, I don't have fingerprint option only on CUSTOM ROMS, which are currently running Android 10 only. I have it perfectly working on STOCK ROMS (A10/A11) and GSI.
Welld1s said:
Sir, I don't have fingerprint option only on CUSTOM ROMS, which are currently running Android 10 only. I have it perfectly working on STOCK ROMS (A10/A11) and GSI.
Click to expand...
Click to collapse
GSI ROMs don't have the fingerprint working mate. .
Thats pretty well known I believe
And a custom ROM would be a complete ROM a GSI is simply a system image, you almost always have to expect issues.. The title of this thread is misleading for that very reason, should have been called "No fingerprint on GSI ROMs"
What happens if you use lineage or Carbon both built for the 1+8pro, my guess is that it'll work.
You could try to flash an actual custom ROM, then wipe system and install the GSI, if that doesn't work then it won't work.
Nothing to do with your hardware, driver, persist or anything else its just a GSI limitation.
Also stop with the patronising attitude, there's no call for it, it doesn't help you, me or anyone else.
dladz said:
GSI ROMs don't have the fingerprint working mate. .
Thats pretty well known I believe
And a custom ROM would be a complete ROM a GSI is simply a system image, you almost always have to expect issues.. The title of this thread is misleading for that very reason, should have been called "No fingerprint on GSI ROMs"
What happens if you use lineage or Carbon both built for the 1+8pro, my guess is that it'll work.
You could try to flash an actual custom ROM, then wipe system and install the GSI, if that doesn't work then it won't work.
Nothing to do with your hardware, driver, persist or anything else its just a GSI limitation.
Also stop with the patronising attitude, there's no call for it, it doesn't help you, me or anyone else.
Click to expand...
Click to collapse
I guess we have a misunderstanding here. What I did and the result - no fingerprint in security options:
1. Flashed stock A10 firmware via MSM, updated to latest A10 version with zip-archive locally
2. Unlocked the bootloader
3. Rebooted to the system once
4. Booted to fastbootd and flashed any custom ROM for both slots (means Lineage OS, Pixel Experience and Carbon ROM) with data/metadata wipes
5. Rebooted to installed system, passed initial setup
6. Set the PIN, got no fingerprint option in settings.
I can repeat: I have it working on stock A10/11 AND GSI, only Lineage, Pixel and Carbon custom ROMs on A10 are affected. Not making something up, not trolling or "patronising", just trying to provide all the useful info that you, for some reason, don't want or can't accept. :/
Edit: my mistake, as I actually didn't try to add any fingerprint on GSI, so can't say that it works for 100% here. I'm just saying, that the option is in place in settings, but not when using custom ROMs like LOS and so on. No offense.
Welld1s said:
I guess we have a misunderstanding here. What I did and the result - no fingerprint in security options:
1. Flashed stock A10 firmware via MSM, updated to latest A10 version with zip-archive locally
2. Unlocked the bootloader
3. Rebooted to the system once
4. Booted to fastbootd and flashed any custom ROM for both slots (means Lineage OS, Pixel Experience and Carbon ROM) with data/metadata wipes
5. Rebooted to installed system, passed initial setup
6. Set the PIN, got no fingerprint option in settings.
I can repeat: I have it working on stock A10/11 AND GSI, only Lineage, Pixel and Carbon custom ROMs on A10 are affected. Not making something up, not trolling or "patronising", just trying to provide all the useful info that you, for some reason, don't want or can't accept. :/
Edit: my mistake, as I actually didn't try to add any fingerprint on GSI, so can't say that it works for 100% here. I'm just saying, that the option is in place in settings, but not when using custom ROMs like LOS and so on. No offense.
Click to expand...
Click to collapse
Then I'm not sure pal.
GSI I would expect it, lineage I haven't installed it but haven't heard anything to suggest it doesn't work.
Carbon ROM I'm pretty sure had the option for me, was a little flakey by it worked..
None taken, sorry I'd barely slept.
PS: seeing as you're on Android 10 why not use twrp? And is born slots necessary? I don't think I did that.
That's the only significant difference I can see between your method and mine.
Also that I set up the phone with a fingerprint each time, not sure if it did or not.
PPS: "don't want or can't accept" yes that's sarcasm pal just saying.
You have a new device. See this thread: https://forum.xda-developers.com/oneplus-8-pro/help/kernel-devs-fingerprint-scanner-t4163005
And this custom kernel fix: https://forum.xda-developers.com/showthread.php?p=83613489
Basically wait for Android 11 custom ROMs to com out.
dladz said:
Then I'm not sure pal.
GSI I would expect it, lineage I haven't installed it but haven't heard anything to suggest it doesn't work.
Carbon ROM I'm pretty sure had the option for me, was a little flakey by it worked..
None taken, sorry I'd barely slept.
PS: seeing as you're on Android 10 why not use twrp? And is born slots necessary? I don't think I did that.
That's the only significant difference I can see between your method and mine.
Also that I set up the phone with a fingerprint each time, not sure if it did or not.
PPS: "don't want or can't accept" yes that's sarcasm pal just saying.
Click to expand...
Click to collapse
Tried with TWRP too, makes no difference for me. Both slots aren't necessary for sure, but that won't hurt too.
I think I tried literally anything except flashing LOS right on A11 OOS, which is a total nonsense. :^(
Welld1s said:
Tried with TWRP too, makes no difference for me. Both slots aren't necessary for sure, but that won't hurt too.
I think I tried literally anything except flashing LOS right on A11 OOS, which is a total nonsense. :^(
Click to expand...
Click to collapse
I didn't suggest flashing Lineage on 11, that's a bad idea wherever said that.
The chap above has a decent idea there, maybe it is hardware.
Give that a shot.
@DJ said:
You have a new device. See this thread: https://forum.xda-developers.com/oneplus-8-pro/help/kernel-devs-fingerprint-scanner-t4163005
And this custom kernel fix: https://forum.xda-developers.com/showthread.php?p=83613489
Basically wait for Android 11 custom ROMs to com out.
Click to expand...
Click to collapse
As I said in the beginning (love quoting myself):
"tried kernels from various authors (even CleanSlate 1.2.7 with special fingerprint fix)"
Doesn't help + gives a distorted image after booting the system on custom ROMs (disappears after locking and unlocking the device again). Looks like the only way is to waaaait. :'c