Related
This Atom stops at the bootup splash and there is a string shown at the top left corner of the screen and this is it "20051129B2"
Not able to make the activesync recognize this handset.
I am able to enter the screen where it says to do a full reset press 'send' and 'end' buttons and when I press them it freezes....
Please help me out of the problem.....
abibaby said:
This Atom stops at the bootup splash and there is a string shown at the top left corner of the screen and this is it "20051129B2"
Not able to make the activesync recognize this handset.
I am able to enter the screen where it says to do a full reset press 'send' and 'end' buttons and when I press them it freezes....
Please help me out of the problem.....
Click to expand...
Click to collapse
Can you enter bootloader?
homer285 said:
Can you enter bootloader?
Click to expand...
Click to collapse
How do I do that...........
Is there any key combo to do that........
Help needed....
Bro it has been posted in so many threads....Press camera and soft reset buttons together.
homer285 said:
Bro it has been posted in so many threads....Press camera and soft reset buttons together.
Click to expand...
Click to collapse
Thanks homer285
I am able to get to the screen where it says
MN1 Bootloader built Dec 1 2005 ..........etc
and option to select 1 or 2
Whats the next step........
Hurray!!!!!!!!!!!!!!..........
You saved my day by giving that hint Bro....
Searched the forum and found lot of info on this.......
Put this Atom to bootloader mode and then flashed and worked like crisp now.......
""THE ATOM CAME ALIVE""
Thankyou buddy...
abibaby- atom bootloader flashed
got it .........
can somebody provide a step by step process once you get into the bootloader mode? I am able to get thru the bootloader mode but after choosing either the 1st or 2nd option, still I get stuck on the splash screen.
Hi everybody,
This is my first post here and I seriously hope someone can help me.
I unlocked my phone and was attempting to root it and flash Cyanogen's MOD. I flashed Armon_RA's recovery image into recovery partition using fastboot, but when I try to access it I'm getting an image of an android with a warning sign, which I can't post yet because I'm a newbie and mod's have to check my account... Once there the only thing I can do is remove the battery.
I've downloaded Armon_RA's img twice and from different sources and the same thing happens.
In terms of what I did, I tried to follow a step-by-step guide at androidandme.com, combined with Cyanogen's official Wiki.
I appreciate any kind of help,
Thanks!
BTW I'm on Ubuntu 9.10, in case it helps.
Took me like 4 times to flash the recovery before I got the care bear screen. Just keep flashing!
I just got it working right now and was about to post it had been fixed.
Thanks anyway!
Sorry for undigging this thread, but this thread is the first one which shows up when I searched for "android recovery warning".
I have spent the entire day trying to fix my Nexus One's recovery (I got stuck on the screen with a warning sign as well), with no success. Trust me, I tried (almost) everything possible to flash a new recovery/restore stock recovery.
What did work, though, was running fastboot flash recovery recovery.img 5 times in a row (remember to boot your phone in fastboot mode before sending these commands). That did the trick, and now I'm able to boot in recovery mode (Clockworkmod, by the way).
Thanks!
That warning ! IS the stock recovery.
albundy2010 said:
That warning ! IS the stock recovery.
Click to expand...
Click to collapse
This.
Some people seem to be confused about what the recovery looks like.
albundy2010 said:
That warning ! IS the stock recovery.
Click to expand...
Click to collapse
GldRush98 said:
This.
Some people seem to be confused about what the recovery looks like.
Click to expand...
Click to collapse
So how can I do a hard reset from this stock recovery when there's no menu commands, how do you use the stock recovery?
I have an unrooted S On nexus one that I need to hard reset because it boot loops for some reason, but didn't want to have to root it.
orangekid said:
So how can I do a hard reset from this stock recovery when there's no menu commands, how do you use the stock recovery?
Click to expand...
Click to collapse
Push the power button and volume up buttons at the same time
Sent from my Nexus One using XDA Premium App
Two buttons together ...
It is a common misconception that you have to push two buttons at the same time to activate some features. Trying to push them at exactly the same time is hit and miss and causes people to have issues.
In every case the combination is always hold one button down and then click the other button once ... much easier than clicking both together.
In this case I believe the combo is hold down power and then click Volume-Up once. (I may have it reversed).
OzCDN said:
It is a common misconception that you have to push two buttons at the same time to activate some features. Trying to push them at exactly the same time is hit and miss and causes people to have issues.
In every case the combination is always hold one button down and then click the other button once ... much easier than clicking both together.
In this case I believe the combo is hold down power and then click Volume-Up once. (I may have it reversed).
Click to expand...
Click to collapse
It most likely is reversed. At least when you want to access the bootloader you want to hold down the volume down button (or maybe it is either volume button) and then turn on the phone. And with fastboot, you hold down the trackball as you turn on the phone.
I believe the volume up and powerbutton at the same was to "ok" the phone to apply an update.zip that was stored on the card (I remember doing that when I was running the Froyo build leaks from google).
OzCDN said:
It is a common misconception that you have to push two buttons at the same time to activate some features. Trying to push them at exactly the same time is hit and miss and causes people to have issues.
In every case the combination is always hold one button down and then click the other button once ... much easier than clicking both together.
In this case I believe the combo is hold down power and then click Volume-Up once. (I may have it reversed).
Click to expand...
Click to collapse
bassmadrigal said:
It most likely is reversed. At least when you want to access the bootloader you want to hold down the volume down button (or maybe it is either volume button) and then turn on the phone. And with fastboot, you hold down the trackball as you turn on the phone.
I believe the volume up and powerbutton at the same was to "ok" the phone to apply an update.zip that was stored on the card (I remember doing that when I was running the Froyo build leaks from google).
Click to expand...
Click to collapse
OzCDN is correct, it is: hold down the power button and press volume up (the reverse does not work), but pushing them both together still works
So when attempting to downgrade to stock according to the instructions (since I needed a stock phone to use for development), it looks like all I can currently do is have the G1 logo come up and then a blank screen.
At that point I can hit Alt-L and get it to say "Android system recovery utility" and nothing more. Nothing about "Hit Alt-W to wipe" or anything like that. Tried hitting those key combos too and nothing happens. Only Alt-L works. When trying to hold different combos of buttons upon a cold boot, the only different one I get is the Power+Action button which I read is for JTAG. All others ALWAYS do the same thing as if I wasn't holding one at all.
I read that if Power+VolUp doesn't work, this means there's no SPL and that means it's bricked w/o a new board or JTAG. Is there ANY hope with the fact that it boots into what seems to be a broken system recovery screen?
Hello,
Hmmm difficult to answer you with the few details you give.
Turn off your devices and press camera+Hold button.
Tell what you see. your phone is not bricked.
To flash a stock rom, you need to put dreaimg.nbg file on your sd card and then press camera+Hold button.
There is a specific post to expolain all that, just read it here :
http://forum.xda-developers.com/showthread.php?t=727688
And directly begin at the step 6
Good luck.
paradix said:
Hello,
Hmmm difficult to answer you with the few details you give.
Turn off your devices and press camera+Hold button.
Tell what you see. your phone is not bricked.
To flash a stock rom, you need to put dreaimg.nbg file on your sd card and then press camera+Hold button.
There is a specific post to expolain all that, just read it here :
http://forum.xda-developers.com/showthread.php?t=727688
And directly begin at the step 6
Good luck.
Click to expand...
Click to collapse
Again I'll quote this part:
At that point I can hit Alt-L and get it to say "Android system recovery utility" and nothing more. Nothing about "Hit Alt-W to wipe" or anything like that. Tried hitting those key combos too and nothing happens. Only Alt-L works. When trying to hold different combos of buttons upon a cold boot, the only different one I get is the Power+Action button which I read is for JTAG. All others ALWAYS do the same thing as if I wasn't holding one at all.
Click to expand...
Click to collapse
I cannot get into the SPL which is what you wanted me to get into.
Not really bricked I would say, But i did fastboot oem unlock and pressed unlock and start and it just stays at the bootanimation logo no matter what i do. I tried to flash the factory image back, it says completed but then it wont boot still, i tried to re lock the bootloader and nothing, any ideas on what to do?
stealthj said:
Not really bricked I would say, But i did fastboot oem unlock and pressed unlock and start and it just stays at the bootanimation logo no matter what i do. I tried to flash the factory image back, it says completed but then it wont boot still, i tried to re lock the bootloader and nothing, any ideas on what to do?
Click to expand...
Click to collapse
Are you able to access recovery at all? If your able to access recovery try preforming a factory reset to see if you can get past the boot animation. Also check out this information that may be helpful.
stealthj said:
Not really bricked I would say, But i did fastboot oem unlock and pressed unlock and start and it just stays at the bootanimation logo no matter what i do. I tried to flash the factory image back, it says completed but then it wont boot still, i tried to re lock the bootloader and nothing, any ideas on what to do?
Click to expand...
Click to collapse
Following steps fixed this problem for me: http://forum.xda-developers.com/showpost.php?p=34188192&postcount=32
shimp208 said:
Are you able to access recovery at all? If your able to access recovery try preforming a factory reset to see if you can get past the boot animation. Also check out this information that may be helpful.
Click to expand...
Click to collapse
100% helped thanks for all the quick info!! if mods can delete this thread that would be great...
stealthj said:
100% helped thanks for all the quick info!! if mods can delete this thread that would be great...
Click to expand...
Click to collapse
Always glad to hear that I was able to help someone out, but I'm always especially happy when I can help someone un-brick there device.
so the deal here is...
so once your in bootloader, hit recovery, then you will see the little dead droid with the triangle... this is where it gets tricky...
keep tapping ( DONT HOLD) the power and volume left ( dunjno which is up or down, so i say left, the one close to the power key)., or in somke cases just mash all the buttons till the menu pops up! then click wipe data then wipe cache and the device reboots itself... give it a try!
i dont knwo why the recovery menu doesnt pop up unjtil u keep pressing volume up/down and power buttons, just keep tapping them in the recovery menu weith the android triangle and u should see the menu pop up
stealthj said:
so the deal here is...
so once your in bootloader, hit recovery, then you will see the little dead droid with the triangle... this is where it gets tricky...
keep tapping ( DONT HOLD) the power and volume left ( dunjno which is up or down, so i say left, the one close to the power key)., or in somke cases just mash all the buttons till the menu pops up! then click wipe data then wipe cache and the device reboots itself... give it a try!
i dont knwo why the recovery menu doesnt pop up unjtil u keep pressing volume up/down and power buttons, just keep tapping them in the recovery menu weith the android triangle and u should see the menu pop up
Click to expand...
Click to collapse
Very interesting to know, maybe you should make a thread in the general section with your findings so other people can easily find this useful information as this seems to be a common problem people run into.
stealthj said:
so the deal here is...
so once your in bootloader, hit recovery, then you will see the little dead droid with the triangle... this is where it gets tricky...
keep tapping ( DONT HOLD) the power and volume left ( dunjno which is up or down, so i say left, the one close to the power key)., or in somke cases just mash all the buttons till the menu pops up! then click wipe data then wipe cache and the device reboots itself... give it a try!
i dont knwo why the recovery menu doesnt pop up unjtil u keep pressing volume up/down and power buttons, just keep tapping them in the recovery menu weith the android triangle and u should see the menu pop up
Click to expand...
Click to collapse
This ^
Works perfect. Thanks so much... :laugh:
I've actually heard that it's a fastboot problem (with the tool, not the firmware on your device). Downloading the latest version of platform-tools solved this particular problem in a hurry for me, and it's probably best practice in the long run.
Is there something I can do in this situation except i don't have stock recovery installed?
Nevermind had a moment
Hello everybody (please apologize for my bad english...)
I tried to hard reset my HD Mini which was running Android and now it won't boot up, the phone's displaying some error messages (in green, black screen)
here's the message:
nand id: 0x5500bcec maker=0xec device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (3136 errors)
ERROR: Cannot read kernel image
ERROR: Could not do normal boot. Reverting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Here's what happens when I power the phone holdind Volume - :
PB92100
SPL-1.07.0000
ENGID 0xF
PCBID 0x80
MicroP(LED) 0x05
TP SNAPTICS
Please, could anyone help me to solve the above? has anyone experienced this?
Thank you
First of all, do you want android or Windows?
for android, when you see "ENTERING FASTBOOT MODE" then you can reinstall the Recovery and go!
Thanks for replying.
I just want my phone work again, so either Windows or Android...
But with android, i already intalled LK Boot (the message appears in blue now) then i installed the recovery from SC Dard but when the phone boots, it's only showing the black screen with message (in blue). With windows I stuck with the ''Invalid vendor ID'' while installing with RUU (I can't determinate my Vendor ID). So please help
Regards
esQmo said:
Thanks for replying.
I just want my phone work again, so either Windows or Android...
But with android, i already intalled LK Boot (the message appears in blue now) then i installed the recovery from SC Dard but when the phone boots, it's only showing the black screen with message (in blue). With windows I stuck with the ''Invalid vendor ID'' while installing with RUU (I can't determinate my Vendor ID). So please help
Regards
Click to expand...
Click to collapse
You had Android before as you said, so you can come back to android easily. just be really sure you have reinstalled the Recovery correctly! (Even this happened to me, but at last you will Pass!)
have you tried to manually enter recovery by VolumeUp?
Please tell us the ROM you want to use.
I can't enter recovery manually, only with PC (with CWM LK Boot Recovery's update.bat file). when i power on the phone holding volume up, the phone displays this message (in blue = meaning that the LK Boot is installed):
nand id: 0x5500bcec maker=0xec device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (3136 errors)
ERROR: Cannot read kernel image
ERROR: Could not do normal boot. Reverting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
The rom i installed is Phonerty-MIUIv4-2.10.26
Thank again for replying
PS: this is what happens when i power phone holding Volume + :
nand id: 0x5500bcec maker=0xec device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
ENTERING FASTBOOT MODE
udc_start()
Good,
When you can't enter Recovery manually (Volume Up), means either it hasn't been installed correctly or you button is damaged. Yes LK Boot is installed (the blue texts) but the Recovery (graphic interface) seems hasn't been installed.
if you can enter Recovery by PC, why not format and install ROM there (don't restart)? you may pass anyway!
and the last thing, did you hold both Power and Volume up? you should just power then release it, but hold Volume UP, what we see in the text you showed us, the phone hasn't detect the pressed Volume Up.
Have a nice try!
iPlasm said:
Good,
When you can't enter Recovery manually (Volume Up), means either it hasn't been installed correctly or you button is damaged. Yes LK Boot is installed (the blue texts) but the Recovery (graphic interface) seems hasn't been installed.
if you can enter Recovery by PC, why not format and install ROM there (don't restart)? you may pass anyway!
and the last thing, did you hold both Power and Volume up? you should just power then release it, but hold Volume UP, what we see in the text you showed us, the phone hasn't detect the pressed Volume Up.
Have a nice try!
Click to expand...
Click to collapse
I've also formatted before i install the ROM but no succes...
I don't think there is a problem with the volume up button 'cause i use it in the recovery and when i press both volume buttons and power button it leads me to the WP reset option (factory resset) and i use the volume up button to confim the action (restoring).
And, is there a way in can check my Vendor ID? 'cause i would like to install WP but fastboot doesn't give me the CID, the command ''fastboot getvar CID'' returns ''CID: '' then nothing. I'm so desesperate...
BR.
Going Back to WM you should have the right ROM, or contact HTC for the right one, read this http://forum.xda-developers.com/showpost.php?p=21617447&postcount=2
And at last, what OS you want to be installed on your phone?
either Android or WP
but android would be better
esQmo said:
either Android or WP
but android would be better
Click to expand...
Click to collapse
Alright then,
You said you can't enter Recovery by VolumeUp, right?
if right, connect USB to PC, Click on Update.bat, press number one, then number two, and restart phone (don't unplug phone), when entered fastboot, press number two again, you may now enter manually recovery. if you couldn't pass, press number two and on your phone you would see recovery interface, format and install the ROM, unplug USB and restart phone.....
Okay, will try. thanks again
iPlasm said:
Alright then,
You said you can't enter Recovery by VolumeUp, right?
if right, connect USB to PC, Click on Update.bat, press number one, then number two, and restart phone (don't unplug phone), when entered fastboot, press number two again, you may now enter manually recovery. if you couldn't pass, press number two and on your phone you would see recovery interface, format and install the ROM, unplug USB and restart phone.....
Click to expand...
Click to collapse
i see the recovery interface,,,,,,,the cmw... i can access the options using volume up and down button........ but when i select the option using power button the phone restarts......if i press and hold the power button the option is selected and next menu appears but as soon as i let go power button to select option , the phone again restarts....the main thing is that i cant go past the first menu......is my power button faulty???....or is there any other way to use cmw??......and can i install rom using that update.exe command menu??......please help me....
anshulonweb said:
i see the recovery interface,,,,,,,the cmw... i can access the options using volume up and down button........ but when i select the option using power button the phone restarts......if i press and hold the power button the option is selected and next menu appears but as soon as i let go power button to select option , the phone again restarts....the main thing is that i cant go past the first menu......is my power button faulty???....or is there any other way to use cmw??......and can i install rom using that update.exe command menu??......please help me....
Click to expand...
Click to collapse
There is nothing no need to press power!
only volume button, you saw the interface and you have to use the touch arrows to begin.
iPlasm said:
There is nothing no need to press power!
only volume button, you saw the interface and you have to use the touch arrows to begin.
Click to expand...
Click to collapse
i may sound like noob........but can you please tell me which arrows to touch....i navigate to install zip from sd option using volume keys ....now how do i select it to go to further 2nd menu....there are 4 on screen buttons......are you talking about those on screen arrows???....because i touch them and nothing happens(may be touch screen problem,i recently got it repaired).....is there any other way to install rom using pc???....
anshulonweb said:
i may sound like noob........but can you please tell me which arrows to touch....i navigate to install zip from sd option using volume keys ....now how do i select it to go to further 2nd menu....there are 4 on screen buttons......are you talking about those on screen arrows???....because i touch them and nothing happens(may be touch screen problem,i recently got it repaired).....is there any other way to install rom using pc???....
Click to expand...
Click to collapse
yeah I mean those 4 arrow buttons which you should touch them. if you touch the arrow, the selection above will move. And there is no need to move by using Volume keys in Recovery.
using PC, it should be possible through terminal ADB, which are some codes for connection. but I don't support this way.
I recommended that you do it by using touch, if the four arrow touch doesn't work, then how can you use it with Android? especially the Phone app is in the four arrow button direction.
iPlasm said:
yeah I mean those 4 arrow buttons which you should touch them. if you touch the arrow, the selection above will move. And there is no need to move by using Volume keys in Recovery.
using PC, it should be possible through terminal ADB, which are some codes for connection. but I don't support this way.
I recommended that you do it by using touch, if the four arrow touch doesn't work, then how can you use it with Android? especially the Phone app is in the four arrow button direction.
Click to expand...
Click to collapse
well my touch is not working then because i press the arrows and nothing happen....... the problem is that even if i get my touch repaired again there is no way of knowing if it is working unless i come home and install recovery again and check it by pressing arrows.... i only see blue screen now...
can you please tell me how to install rom through adb.....i can take the risk.....please i will be very thankful.....once i install rom, i can get my phone repaired because i can show the person that touch is not working and he will repair it.... please help me....
anshulonweb said:
well my touch is not working then because i press the arrows and nothing happen....... the problem is that even if i get my touch repaired again there is no way of knowing if it is working unless i come home and install recovery again and check it by pressing arrows.... i only see blue screen now...
can you please tell me how to install rom through adb.....i can take the risk.....please i will be very thankful.....once i install rom, i can get my phone repaired because i can show the person that touch is not working and he will repair it.... please help me....
Click to expand...
Click to collapse
You should follow a guide, search for (Install ROM through adb, install ROM without SDCARD, install ROM via adb)
Anyway, I found this guide may help you: http://forum.xda-developers.com/showthread.php?t=911228
Remember to enter recovery as you did it (Volume + up), So follow the link above at your risk, you may skip the Wipe/format step.
iPlasm said:
You should follow a guide, search for (Install ROM through adb, install ROM without SDCARD, install ROM via adb)
Anyway, I found this guide may help you: http://forum.xda-developers.com/showthread.php?t=911228
Remember to enter recovery as you did it (Volume + up), So follow the link above at your risk, you may skip the Wipe/format step.
Click to expand...
Click to collapse
thanks for your help man.....:good: