Hi,
My zte axon 7 is stuck on booting the phone (zte blue logo). I can't do any manipulation (turn it off, turn it on, access the recovery). The phone is not detected by the pc (even trying with mi flash).https://photos.app.goo.gl/Y1DKYLrZKUorzPcu8
Solved
Related
Hi guys, I'm from South Africa and I really need help right here!
After updating (not manually) my Huawei P8 Lite ALE-LO2 to android 6.0 it was working perfectly. A few days ago the phone started freezing and powering off, when I try powering the phone on it just flashes a red and green LED light and doesn't switch on, sometimes it does switch on but freezes on the Huawei logo. When I plug it in a charger it still flashes red and green light. Sometimes it would take me to rescue mode and says I need to re-update the system. The problem is I can't power it on, and therefore I can't do anything on the device.
Your help will be highly appreciated.
Hello,
My ZTE ZMAX Has Been Acting Up Lately, i recently updated the phone and when it booted up it boots up to the android logo then boots down to black screen with red light i also cannot enter recovery to reset it the only method is FTM. I Have Also Tried Holding The Power Button For 20 Seconds Or 15 Seconds, Even Tried Taking Out The battery And i Finally Did Still Stuck On That Screen Please Help Me Boys! Thanks. Don't want to have to throw away my phone. I love it.
In recovery normal go to and sideload and toy this command." Adb reboot disemmcwp"
Hello everyone.
I own a Huawei P10 Lite WAS-LX1A (2017)
Recently I forgot my phone above my car.. Unfortunately it dropped down and it was all broken but the board was intact.
I bought a new LCD assembly, back cover, battery and the fingerprint sensor.
Phone is now rebuilded but I dont know why, the phone turns on in "Huawei eRecovery" mode. So I assume the phone is bricked due to high damage.
I never rooted it so:
- The bootloader is locked.
- I can access fastboot but it says the Phone is locked and FRP is locked.
- Cannot use Huawei eRecovery because I cannot choose an Wi-Fi.
- USB Debugging is off.
- I tried the UPDATE.APP method with 10 different files (at least) to install new OTA but every firmware stucks at 5% percent (when I press Vol Up + Vol Down + Power).
What can I do?
Thank you for your help
I have a redmi note 4 mediatek variant and it's been stuck in bootloop for the past 2 days. It keeps restarting and doesn't go into fastboot mode.
The bootloader is locked. It won't go into recovery or fastboot. Sometimes it turns on when holding the power button but then goes into a bootloop.
This was the message last displayed on the phone:
RED STATE
YOUR DEVICE HAS FAILED VERIFICATION AND MAY NOT WORK PROPERLY
YOUR DEVICE WILL BOOT IN 5 SECONDS
And then it shut down and hasn't responded since.
Going to a service center probably won't help since this is a chinese variant and I live in India.
It was running all stock without root and no part replacements.
hi there. your problem already solve or not? i got same problem same as you yesterday, the solution is you need to install mi unlock on you pc, then unlock bootloader. done.
Hi
I'm facing a problem with my tablet. It shut down after official update and gets a bootloop. I'm not able to get into recovery mode beacuse when I press power+vol up it gets stuck on Lenovo logo. I was able to enter a fastboot mode so I decided to flash ROM. I tried official Lenovo assistant and Qfil + Many roms (stock, dumps from other users) but I always gets a bootloop. I can't turn off a tablet, because it turn on by itself and gets into bootloop until battery dead. What is a cause? How to fix it?
Update: I leave it plugged in to PC via USB cable and after many bootloops my PC shows tablet as a hard drive (I was shocked). Then tablet shows animated Lenovo screen, then Lenovo screen with Snapdragon and finally on screen I saw menu with language selection. My joy was short, because right after choosing language I get a information: Battery temperature is to low. Charging has been stoped" Then tablet shut down again and goes to many bootloops until it will turn on again with the same information. Is this a battery problem?