Hi, my Defy (Green Camera) is stuck on JORDN_U3_97.21.51.sbf - strange chineese Eclair ROM - screenshot here http://forum.xda-developers.com/showpost.php?p=27590063&postcount=4.
I installed it after my battery died during updating Cyanogen to newer version - I panicked a bit and needed working phone asap, so I used mcGyver hack and flashed it with RSD Lite as I found in some guide.
Now I want to install any better system on top of it (it's real crap - all google apps crashes immediately for example) Cyanogen 10+ would be best.
There are some similar threads, but they wanted to downgrade system, not upgrade.
http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143 - I didn't tried it yet as download pages
looks suspicious. //edit: downloading it, but it's really slow.
I've also read:
http://forum.xda-developers.com/showthread.php?t=1486731
http://forum.xda-developers.com/showthread.php?t=1365673
http://forum.xda-developers.com/showthread.php?t=1065798
http://forum.xda-developers.com/showthread.php?t=1216982
http://forum.xda-developers.com/showthread.php?t=1795647
What I tried to do so far is:
I. Rooting phone with SuperOneClickv2.3.3-ShortFuse
II. Installing SndInitDefy_1.4_2.apk
III. One of following:
a)
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash cm-10-20131030-NIGHTLY-mb526.zip
6) Wipe Cache and Dalvik again
7) Restart.
It didn't boot in 10 minutes (Motorola logo) so I flashed sbf again and returned to I.
b)
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash froyo kernel
5) Flash CM10-20120924-NIGHTLY-mb525.zip.
7) Wipe Cache and Dalvik again
8) Restart.
It didn't boot in 10 minutes (Motorola logo) so I flashed sbf again and returned to I.
c)
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash froyo kernel
5) Flash cm-72-20120921-NIGHTLY-Defy.zip
7) Wipe Cache and Dalvik again (recommended).
8) Restart
It didn't boot in 10 minutes (Motorola logo).
I also tried some other Quarx builds, some times with gapps and RLRv2.16_base.zip but I don't remember details.
Any ideas what can I do? Now i'm trying downloading various roms and trying to install them with recovery.
EDIT:
Now I have DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf which works, but I cant root it - zerg rush fails
Well.. After I flash something I don't wipe cache and dalvik , this maybe should be the problem..Before I install something I do a data/factory reset , wipe cache , and then wipe dalvik. You should try after you install something don't wipe cache and dalvik..
OK, i fixed it.
With DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf from http://forum.xda-developers.com/showthread.php?t=1542956 i got root, after that i installed SndInitDefy_2.3.apk and was able to flash CM10.
My friend's device has TWRP 2.8.7.7 and CyanogenMod 12.1 by @ED300 (not up to date).
She wants it to be restored in its original state. How could I flash this file?
Code:
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Should I just wipe system, data, and cache in TWRP then flash the zip from the link?
1. Reboot into recovery.
2. Wipe the normal way (Factory reset).
3. Flash the .zip.
4. Wipe cache and Dalvik cache after flashing, just in case.
5. Reboot. Enjoy!
Using TWRP? Don't I have to wipe system first when coming from another ROM? Thanks,
You have to wipe system, data, cache, dalvik cache
For me that didnt work you have to extract stockrom.zip then extract system.zip then take boot.img and flash it first, followed by system.zip and yourcountry.zip
#Newupdate MIUI8.2 8.2.1.0 Global Stable for MimaxPro
http://bigota.d.miui.com/V8.2.1.0.MBDMIDL/miui_MIMAX652Global_V8.2.1.0.MBDMIDL_9060ae09fa_6.0.zip
ota 8.1.9.0-8.2.1.0
http://bigota.d.miui.com/V8.2.1.0.M...0.MBDMIDI-V8.2.1.0.MBDMIDL-b2511afedf-6.0.zip
formimax650
FullRom http://bigota.d.miui.com/V8.2.1.0.MBCMIDL/miui_MIMAXGlobal_V8.2.1.0.MBCMIDL_ad2db3ac36_6.0.zip
Does it work on mi max 32g global? Thanks in advance
Nano23 said:
Does it work on mi max 32g global? Thanks in advance
Click to expand...
Click to collapse
Yes, it should do.
Note:
Update for Mi Max / Redmi 1S suspended
http://en.miui.com/thread-501418-1-1.html
Waiting for fix the bugs
Plz. Which one is for mi max 32g global version?
---------- Post added at 12:11 AM ---------- Previous post was at 12:10 AM ----------
And how to update i am in miui 8 1.6.0
On my 32GB Global, i had OTA notification for v8.2.1.0 when i was on v8.1.6.0
Downloaded using upgrade tool, installation is ok.
Easily rooted using TWRP after.
I have no information about upgrade mi max plz can somone explain step by step how to do
Thank you very much! Full ROM work like a charm on Mi Max 3/32GB.
It's Android Nougat ?
bortoloj said:
It's Android Nougat ?
Click to expand...
Click to collapse
No, it's Marshmallow 6.0.1.
Why full rom is still unavailable for Fastboot mode ?
How can i install this with TWRP and keep TWRP and keep root and keep my unencrypted internal storage?
Is it rooted or my Mi Max root will be gone, thanks
Well, full ROM is not rooted, that's for sure. If you want to install it, do a backup before with TWRP on Micro SD. It is very recomended. If something goes wrong then you can restore your system.
For CLEAN INSTALL, on Mi Max 3/32 GB, I followed theese steps. By doing this, you will loose all your previously apps and data:
1. Download and Copy full ROM from first post on Micro SD (miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip).
2. Download and Copy SR3-SuperSU-v2.79-SR3-20170114223742.zip on Micro SD. Can be found here: download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
3. Download and Copy Install lazyflasher-no-verity-opt-encrypt.zip (a script to disable dm-verity and forced encryption) on Micro SD. Can be found here: en.miui.com/thread-310923-1-1.html
4. Boot into TWRP.
5. Mount System, Data, Cache, Internal Storage, Micro SD.
6. Advanced WIPE -> Select Dalvik/ART Cache, System, Data, Cache, Internal Storage. Swipe to WIPE.
7. Install miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip from Micro SD.
8. Install SR3-SuperSU-v2.79-SR3-20170114223742.zip from Micro SD.
9. Install lazyflasher-no-verity-opt-encrypt.zip from Micro SD.
10. WIPE DALVIK & CACHE.
11. Reboot to System.
If device automatically reboot after step 8, reboot again in TWRP (by continuously pressing Power + Volume Up until vibrate and then release and wait for TWRP) and continue with step 9, 10 and 11.
Wait 10-20 min for first boot and continue with system setup. You will have SuperSU installed.
This worked for me, but I'm NOT responsible for your actions.
More about MIUI Global Stable ROM 8.2 Fastboot and Recovery versions here: en.miui.com/thread-508000-1-1.html (Changelog and Download links).
Tried it, still on Android 6. Not much different.
Will try the beta 7.2.16.
Can NOT install MultiRom.ME
HawkXP said:
Well, full ROM is not rooted, that's for sure. If you want to install it, do a backup before with TWRP on Micro SD. It is very recomended. If something goes wrong then you can restore your system.
For CLEAN INSTALL, on Mi Max 3/32 GB, I followed theese steps. By doing this, you will loose all your previously apps and data:
1. Download and Copy full ROM from first post on Micro SD (miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip).
2. Download and Copy SR3-SuperSU-v2.79-SR3-20170114223742.zip on Micro SD. Can be found here: download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
3. Download and Copy Install lazyflasher-no-verity-opt-encrypt.zip (a script to disable dm-verity and forced encryption) on Micro SD. Can be found here: en.miui.com/thread-310923-1-1.html
4. Boot into TWRP.
5. Mount System, Data, Cache, Internal Storage, Micro SD.
6. Advanced WIPE -> Select Dalvik/ART Cache, System, Data, Cache, Internal Storage. Swipe to WIPE.
7. Install miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip from Micro SD.
8. Install SR3-SuperSU-v2.79-SR3-20170114223742.zip from Micro SD.
9. Install lazyflasher-no-verity-opt-encrypt.zip from Micro SD.
10. WIPE DALVIK & CACHE.
11. Reboot to System.
If device automatically reboot after step 8, reboot again in TWRP (by continuously pressing Power + Volume Up until vibrate and then release and wait for TWRP) and continue with step 9, 10 and 11.
Wait 10-20 min for first boot and continue with system setup. You will have SuperSU installed.
This worked for me, but I'm NOT responsible for your actions.
More about MIUI Global Stable ROM 8.2 Fastboot and Recovery versions here: en.miui.com/thread-508000-1-1.html (Changelog and Download links).
Click to expand...
Click to collapse
Hi there,
I can not install any version of MultiRom.me ROM, except this one v8.0.1.0 Global Stable. Here is the detail of my weird issue.
A. What do you have?
Mimax 3/32GB with working TWRP 3.0.3-0
https://dl.twrp.me/hydrogen/twrp-3.0.3-0-hydrogen.img
v8.0.1.0 Global Stable ROM flashable .zip file (1)
http://ua.multirom.me/MROTA/STABLE/V8/V8.0/multirom_MIMAX_V8.0.1.0.MBCCNDG_v6.0.1_b13_e685363f8e.zip
v8.2.2.0 Global Stable ROM flashable .zip file (2)
https://vroms2fe7lh.multirom.me/MRO...AX_V8.2.2.0.MBCCNDL_v6.0.1_b24_8c9ad51076.zip
SuperSU 2.79 flashable .zip file (3)
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
B. What process did you use?
Booted to TWRP
Wiped fully (system, data, cache, davik cache)
Installed ROM (saved in USB OTG)
Installed SuperSU (saved in USB OTG)
Wiped Cache & Davik Cache
Rebooted
C. What is your issue?
If I used the combo (1), (3) and process (B), everything worked well w/o any problem. But,
If I used the combo (2), (3) and process (B), it could not boot up. The Mi logo lighted on in 1s and shutdown immediately later whenever I pressed power button.
In addition, I could not boot into TWRP too.
Now I've been in rom (1) with working TWRP, and still could not flash rom (2).
Kindly help me explain it and show me how to solve this issue.
Thanks and Best Regards,
[email protected]
Hello,
I tried to download v8.2.2.0 Global Stable ROM flashable .zip (2) but I could not access the file (forbidden). So I have no way to test the installation.
Try this:
1. Boot into TWRP.
2. Wipe (system, data, cache, davik cache and internal storage).
3. Install ROM.
4. Go to Mount -> Select , Deselect and Select againSystem. Let it selected.
5. Go to Advanced -> File Manager -> Go to System folder. In root of System it's a file: recovery-from-boot.p. Delete it. In this way, you will not loose TWRP.
6. Go back and install SuperSU.
7. Wipe Cache & Davik Cache.
8. Reboot.
It is possible for the device to auto reboot 2-3 times until the system will load.
See if this will help you.
first ：is baidunetdisk link：LINK: https://pan.baidu.com/s/1JrBqiQFJ7Mcp_1Kla6lmkw code: h8ff china netdisk
wait for upload to Gdrive
1) Download rom
2) Boot into recovery(twrp)
3) ........
4) Wipe (Dalvik Cache, Cache, System and data) It is best to clear all
5) Flash rom
6) Flash Pie GApps or not (user choice)
7) Flash Magisk (user choice if root wanted)
8) Reboot
9） Enjoy
link: https://pan.baidu.com/s/1JrBqiQFJ7Mcp_1Kla6lmkw
CODE: h8ff
I just keep booting back to recovery
Per the forum rules, search before posting and do not duplicate threads in the forum. This release is already being discussed here:
https://forum.xda-developers.com/showthread.php?t=3866579
THREAD CLOSED
hkintk said:
first ：is baidunetdisk link：LINK: https://pan.baidu.com/s/1JrBqiQFJ7Mcp_1Kla6lmkw code: h8ff china netdisk
wait for upload to Gdrive
1) Download rom
2) Boot into recovery(twrp)
3) ........
4) Wipe (Dalvik Cache, Cache, System and data) It is best to clear all
5) Flash rom
6) Flash Pie GApps or not (user choice)
7) Flash Magisk (user choice if root wanted)
8) Reboot
9） Enjoy
Click to expand...
Click to collapse
When I touch reboot>power off button, TWRP is asking me to install TWRP
Should I Swipe to instaal TWRP app?
Booting is still working with Stock ROM, transferred Gapps & Custom ROM
Lenovo Recovery System Installed
Lets organize everything to someone that will help me
1. Installing TWRP
- When I typed the command <fastboot reboot> TWRP boots successfully, but when turn off Lenovo Recovery System boots again
2. Wipe data
- Which option do I need to select? Wipe cache, dalvic cache, system, data
- Can I just go to Install option and choose Custom ROM from device storage, without Wiping data first?
- If I select wipe data first it won't be erase files <Custom ROM & Gapps> from the actual OS?
Thanks !:laugh: