2022 Chevrolet / GMC Refresh - adb help!!! - Android Head-Units

I just purchased a 2022 Chevrolet Silverado and it has the refresh interior. This includes a 14.1" android tablet as the radio.
This device is running Android 10. I have enabled developer settings, but can't seem to get any devices to pick it up in adb mode.
I've tried with my phone (wireless) and with my computer (wired).
I'm trying to side load some applications to it.
Can some one help me in this forum?
Thanks in advance

We're you able to make any progress on this ?

mcgrath.travism said:
We're you able to make any progress on this ?
Click to expand...
Click to collapse
Unfortunately not. I've never had any issues doing this with android devices. Any advice would be appreciated

Darn... I havent been able to either.
I was really hoping to be able to sideload some basic apps since this is more or less an Android tablet in the truck.

Any luck on this

mcgrath.travism said:
Darn... I havent been able to either.
I was really hoping to be able to sideload some basic apps since this is more or less an Android tablet in the truck.
Click to expand...
Click to collapse
Yeah man me 2.. I ended up buying an android stick so I can use any app now, but sucks using an extra device

Guitar420 said:
Yeah man me 2.. I ended up buying an android stick so I can use any app now, but sucks using an extra device
Click to expand...
Click to collapse
Which android stick did you end up going with? Also does it work in full screen?
I tried one from Amazon but it only works through apple carplay so it only shows on 2/3 of the display.

Up
Up

Hey, this is kind of a stupid question but.....along similar kinda thought, when I connect my phone via USB to my car, is there a way I could see and change the stock parameters in the sound system to something more like my liking. I use wavelet with my phone and when I plug in with USB in the car to drive even the car is effected. Without the wavelet it doesn't sound the same. I'm wanting to see if I can somehow do that so I don't gotta plug my phone in with wavelet. Cause sometimes wavelet acts funny.

Michael Romanov said:
Hey, this is kind of a stupid question but.....along similar kinda thought, when I connect my phone via USB to my car, is there a way I could see and change the stock parameters in the sound system to something more like my liking. I use wavelet with my phone and when I plug in with USB in the car to drive even the car is effected. Without the wavelet it doesn't sound the same. I'm wanting to see if I can somehow do that so I don't gotta plug my phone in with wavelet. Cause sometimes wavelet acts funny.
Click to expand...
Click to collapse
What is your car? Do you mean like a equalizer?

mcgrath.travism said:
Which android stick did you end up going with? Also does it work in full screen?
I tried one from Amazon but it only works through apple carplay so it only shows on 2/3 of the display.
Click to expand...
Click to collapse
I am using the M-Stick MG-S01 off Amazon.
It don't show the whole screen but most. It's also not the greatest, but it works for the most part. Which one are you using?

I was able to get ADB to recognize this system. However I get the error from android ADB tools "The Secure ADB mode is enabled. Please use the GM Secure ADB Client tool to authenticate first." I am looking for a way around this. Any ideas?
Also note I have firefox and airscreen(airplay mirroring) working in the GM emulator so if only ADB worked we could be having so much fun.

Guitar420 said:
I am using the M-Stick MG-S01 off Amazon.
It don't show the whole screen but most. It's also not the greatest, but it works for the most part. Which one are you using?
Click to expand...
Click to collapse
I also have a refresh Silverado and just tried a CarPlay box, how did you get it to go almost full screen? Mine still shows the side scroll menu with the clock and media player

I'm assuming you know how to activate developer mode by going
Touch "Settings"->"About"->"Build number"->then tap the white file name several times and it will count down how many taps it takes to enable it.
Still trying to figure out how to sideload apps if anyone has made any progress.

Related

Mk808 android 4.1 mini pc

http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium
nice gadget!!
richeazy said:
http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards
gillidk said:
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards
Click to expand...
Click to collapse
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks
I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.
Ordered mine today (only $60), if it really works as reviews say, it's quite a bargain
Do you still have problems with the rc11 or are they solved ?
send by an 42y old gio junkie™
player911 said:
I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.
Click to expand...
Click to collapse
Did you get it by express delivery or normal delivery
send by an 42y old gio junkie™
I fixed my Measy Air Mouse R11.
To reset the Gyros, you lay it flat and press and hold LEFT ARROW + G for a few seconds... making sure it is flat. Now it works great.
I'm having some weird issues with some misbehaving apps. Root explorer started freaking out. And now my FPse won't use OpenGL for the life of me. I'm interested in trying the CM10 build for it but the operation requirements are bland. Supposedly it requires CWM recovery, which is supplied but doesn't give specifics how or what order or process to get it done.
I have to say that it is a fun unit to work with and chews through FPse roms. I'm surprised how well it runs for a chinese chipset.
Flashing is a bit of a chore and instructions aren't very clear, so I'll post them here:
With the unit OFF:
Insert a paper clip into the reset hole and press it in and HOLD IT down.
Awkwardly insert the MicroUSB-PC cable into the OTG. This will power the unit and it should boot into Flash mode given you've held the paperclip down properly.
Trying to install eGalax Touch Screen linux driver
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.
rscreen said:
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks
Click to expand...
Click to collapse
Ordered on the 26th for 65$ (actually cost £42 through paypal),
they shipped on the 29th (tracking never worked).
And it arrived on the 6th. So quicker than expected.
I've applied the firmware update which was a slightly newer build of 4.1. Mentioned in both these places (applied the tweaked one from deadhp1 for the play store location fix in case needed)
http://blog.geekbuying.com/index.php/2012/11/03/mk808-mini-pc-firmware-update-on-3th-nov/
http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=13&t=53
It now seems to play any avi / mkv / mp4 i've given it (usually on a usb stick or micro SD). It happily plays avi's over the network (using ES file explorer).
Its definitely better than the out of sync UG802 which wasn't quite right and the power lead came out too easily.
I use the custom stock video app (seems to come with most of the RockChip devices) and MX player (it looks a lot nicer)
I was looking for a device like this one and the reviews are really helpful
Anyone know of GPS that works with these?
jcps said:
I was looking for a device like this one and the reviews are really helpful
Click to expand...
Click to collapse
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.
So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?
Avuja said:
So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?
Click to expand...
Click to collapse
It is a mini PC that has HDMI output. Your TV must have a vacant HDMI input so you can plug the mini PC into it. My TV supports 1080p. And so I can set the output resolution on the mini PC to 1080p. But it also could be set to 720p as well. These don't come with any display so you have to plug it in to your TV or a monitor that supports HDMI. The audio is pushed through the HDMI as well. To control it you can use a USB mouse and/or USB keyboard. Your cheap wireless mouse will work but the USB ports do not have power to them so I've had to use a powered USB hub to make my wireless keyboard work further than a foot away from the USB dongle for the keyboard. The hub also allows you to plug in other devices like a USB camera. But the ones that work are somewhat limited , be aware. Does that help you understand it?
Maxx57 said:
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.
Click to expand...
Click to collapse
probably you will need the kernel sources. also, you need root access. that error (directories that get lost after reboot) might be due to yo need to remount the /system partition in rw mode (by default is ro) and perhaps you will neet to do some symlinks on /bin to /system/xbin.
other thing you..must get in considwration is that android is different from linux.. and that you might need to compile the kernel module, such thiing im not sure that is posible from within the device itself...
or.. i just might be way off track, in which case jyst dismiss my answer
Enviado desde mi MB860 usando Tapatalk 2
Maxx57 said:
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.
Click to expand...
Click to collapse
I'm very interested to know as well, I have an MK808 and would love to add a GPS dongle.
Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app
killerskincanoe said:
Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
just so you know it doesn't have built in bluetooth.
if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.
I read up on this one. Good vid review at http://youtu.be/X8pozwuAq7w
Anyone know the spec diff between this and the MX2?
and is geekbuying the best seller for this device or ???
c
h-guy said:
if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.
Click to expand...
Click to collapse
---------- Post added at 11:31 AM ---------- Previous post was at 11:24 AM ----------
can anyone comment on this non-support of XBMC for Rockchip? and if not Rockchip, which stick-PC gets it right?
one comment also that I would like more info on is that both iMITO units underperform compared to MK808
"Lack of XBMC support for HD hardware acceleration is a major issue that Rockchip needs to address if they want to keep selling SoC chips to the Stick PC mfgrs. Stick PC makers need 2 take action on this as well and if Rockchip won't play ball, they need to consider alternative SoC. We need more processing power anyway to get close to current smart-phone level and play the latest 3D games."

standard android settings! generic bluetooth audio is working!!! thank you scottsdca!

FRIGGIN CHAMPION GENIUS IDEA of scottsdca
get Settings.apk from here:
http://www.glassxe.com/2013/05/23/s...-from-the-hacking-glass-session-at-google-io/
UPDATE: original article is gone. check archive.org if you want to read it. but you can still get the Settings.apk here
don't bother with the Launcher2, all it does is crash immediately. although if you have a thing for apps that crash immediately, well then there you go. could be it's a year old and maybe we need to try a 4.2 launcher.
like the article mentions, nearly all of the Settings stuff just crashes (plus, some of it I'd be scared to mess with anyway for fear of messing up spamazon settings)
I don't have any 4.2 devices (aside from ~ firetv obvs), but if anyone else does (like standard-ish non-weird device... e.g. generic tablet or phone?) - would you mind pulling settings and launcher apks please? they might be more suitable and less crashy...
I haven't done much but so far I have a bluetooth speaker paired, connected, and WORKING - sound is coming out the BT speaker and not my TV.
even fired up PrimeTV and sound was as normal, only it was the BT speaker.
xbmc? darn right the sound is coming perfectly out of the BT speaker.
now I turned off the BT speaker, and sound is coming out the TV again. seamless as it should be.
turned the speaker back on, and it autoconnected, all fireTV audio is back on the BT speaker again.
no luck with BT keyboard just yet, and have other settings to still mess with...
(also: the spamazon settings are all still there and all still work as before)
slightly more useless info:
it seems like anything that needs a PIN code still doesn't work.
which is hilarious for 2 reasons:
- the PS3/BD remote does not use a PIN. but so far every android device I have, asks for a PIN for it. the workaround app for anything up to android 4.1.x (i.e. bluez) is great. but firetv is 4.2 and that app doesn't work with the new bluedroid.
- my BT speaker that is currently working (BEM Cube), also does not use any PIN. but it is different somehow, in that android understands in this case, and pairs without asking for any PIN.
Settings shows the BEM Cube's profile as media audio, as expected.
if I try to pair my BT keyboard, the firetv BT settings gives me a PIN to type on the kbd. but the firetv pairing dialog sits there waiting forever no matter how many times I type ####+Enter on the kbd.
if I try to pair my phone, both the phone and the firetv pop up a dialog with matching numbers, but after I press OK on both dialogs, nothing happens. (sometimes the phone says incorrect / missing PIN, afterward. but not always)
if I try to pair my Supertooth Disco speaker, the firetv asks me for a PIN. in this case the PIN is most definitely 0000. but after entering that, nothing happens. not even any error message.
so it seems to be a generic passcode issue? I haven't looked at logcat yet...
I really wanted to try the Disco because it has some extra controls on it. the BEM Cube only has Play/Pause - which does work correctly in both xbmc and PrimeTV.
addition: I found my crappy old Arctic P311 headset (audio has 0.5s lag on every single desktop, laptop, console, phone, etc. I ever tried it on, that's how cheap+awful it is.) - it also happens to be PIN-less (in the good way like the BEM, not the bad way like the BD remote. whatever the hell that means.), and it paired right away with firetv. and then connected with no problem. it has a play/pause button, and also ff + rewind buttons. all the buttons worked as expected in PrimeTV and xbmc. whee.
also, the P311 shows up in Settings with both a media audio profile, and a phone audio profile. nice.
///
after a ton of times connecting/disconnecting the Cube (only because it was stupid fun and made me smile for some reason), started to get a few sound artifacts, some out of sync a/v, and eventually no sound at all on BT (but still perfectly normal sound on HDMI). probably also worth a look at logcat. I also wonder if all the messing around with the other BT devices that all failed, caused any instability.
restarting BT seemed to clean up the audio weirdnesses -
the settings app WILL let you turn BT off and on, just be careful lol. it scared the heck out of me the first time.
- turn BT off. BT goes off. settings app crashes. uh oh! wtf am I gonna do?
- run settings app again. toggle BT on. settings app crashes. oh no! am I seriously screwed now?!
- run settings app again. BT button is blue/on! waow! Thank Crom!
have you tried to allow apps to install from unknown sources?
dhayman11 said:
have you tried to allow apps to install from unknown sources?
Click to expand...
Click to collapse
'developer options' was the very first thing I tried - sorry, no dice (
it, and most of the other settings items, only crash the app.
the only things that work (or semi-work), are:
bluetooth
sound (changing the ringtones is ok, but trying the volume setting crashes)
display (didn't try any of these)
battery (uh huh)
location services (uh huh)
security (but no way am I touching any of those)
dock (yeah, no...)
date&time (it's right, why mess with it)
about phone (tells us stuff we already know)
I haven't really tried to change anything in any of those (except bluetooth obvs) - nothing terribly useful to change, so, to me, nothing else there worth the risk of breaking anything.
the unknown sources box is usually found under security not developer options, but that may crash too
dhayman11 said:
the unknown sources box is usually found under security not developer options, but that may crash too
Click to expand...
Click to collapse
duh me, ugh. yeah you are totally right.
ok, so it is there on the security subsection if I scroll to the bottom.
but, yep, it crashes back to the main settings page. that's unfortunate.
tarvoke said:
duh me, ugh. yeah you are totally right.
ok, so it is there on the security subsection if I scroll to the bottom.
but, yep, it crashes back to the main settings page. that's unfortunate.
Click to expand...
Click to collapse
Damnit that would have been ideal. Thanks for trying
dhayman11 said:
Damnit that would have been ideal. Thanks for trying
Click to expand...
Click to collapse
no worries it was definitely worth a try.
ok.
so.
I just had a really stupid idea.
even worse, it actually works. but not sure it's worth making a separate post about.
1. turn on adb wifi debugging
2. sideload your favorite terminal, e.g.
http://jackpal.github.com/Android-Terminal-Emulator/downloads/Term.apk
3. fire up said terminal
4. adb connect localhost
(LOL!)
5. profit? profit!
$ adb -s localhost:5555 install foobarbaz.apk
$ adb -s localhost:5555 shell
...
not as quick or classy as unknown sources, but you can do it all within the firetv and don't need an extra phone or computer. so... kinda not too bad?
///
edit:
the reason I use "-s localhost:5555" is that in some cases the firetv already had an existing device listed, "emulator-5554". which may have been the result of not disconnecting adb from my laptop, or just the fooling around I was doing running adbd and adb on the same device, or...?
once you are in the terminal app, run "adb devices" first. if it already shows emulator-5554, then you don't need to connect a second time and can just use adb normally. if it does not show any existing device, then you do need to "adb connect localhost" but then in that case you should not need to specify "-s whatever" and also just use adb normally.
tarvoke said:
no worries it was definitely worth a try.
ok.
so.
I just had a really stupid idea.
even worse, it actually works. but not sure it's worth making a separate post about.
1. turn on adb wifi debugging
2. sideload your favorite terminal, e.g.
http://jackpal.github.com/Android-Terminal-Emulator/downloads/Term.apk
3. fire up said terminal
4. adb connect localhost
(LOL!)
5. profit? profit!
$ adb -s localhost:5555 install foobarbaz.apk
$ adb -s localhost:5555 shell
...
not as quick or classy as unknown sources, but you can do it all within the firetv and don't need an extra phone or computer. so... kinda not too bad?
///
edit:
the reason I use "-s localhost:5555" is that in some cases the firetv already had an existing device listed, "emulator-5554". which may have been the result of not disconnecting adb from my laptop, or just the fooling around I was doing running adbd and adb on the same device, or...?
once you are in the terminal app, run "adb devices" first. if it already shows emulator-5554, then you don't need to connect a second time and can just use adb normally. if it does not show any existing device, then you do need to "adb connect localhost" but then in that case you should not need to specify "-s whatever" and also just use adb normally.
Click to expand...
Click to collapse
Awesome worked flawlessly for me. :good:
tarvoke said:
if I try to pair my BT keyboard, the firetv BT settings gives me a PIN to type on the kbd. but the firetv pairing dialog sits there waiting forever no matter how many times I type ####+Enter on the kbd.
Click to expand...
Click to collapse
You ever get anywhere with the BT keyboard? I'm stuck here too. Tried pushing a settings.apk from 4.2.2 but haven't had any success there.
dhayman11 said:
You ever get anywhere with the BT keyboard? I'm stuck here too. Tried pushing a settings.apk from 4.2.2 but haven't had any success there.
Click to expand...
Click to collapse
sorry brother, no dice I tried 4.1 and 4.2 versions too, but not really surprised it didn't do much
from what I remember of dmesg output, the firetv kept requesting a pin over and over, and not getting one
tarvoke said:
sorry brother, no dice I tried 4.1 and 4.2 versions too, but not really surprised it didn't do much
from what I remember of dmesg output, the firetv kept requesting a pin over and over, and not getting one
Click to expand...
Click to collapse
I tried pairing a keyboard and got a PIN dialog on the FireTV, but entering the PIN on the keyboard failed. adb logcat showed that the pairing request had been cancelled immediately after the dialog appeared. Perhaps some Amazon modification to the low-level Bluetooth stuff? Interestingly, despite being 4.2 based, Amazon are still using the BlueZ stack rather than Google's own implementation.
tarvoke said:
slightly more useless info:
it seems like anything that needs a PIN code still doesn't work.
which is hilarious for 2 reasons:
- the PS3/BD remote does not use a PIN. but so far every android device I have, asks for a PIN for it. the workaround app for anything up to android 4.1.x (i.e. bluez) is great. but firetv is 4.2 and that app doesn't work with the new bluedroid.
- my BT speaker that is currently working (BEM Cube), also does not use any PIN. but it is different somehow, in that android understands in this case, and pairs without asking for any PIN.
Crom!
Click to expand...
Click to collapse
It is my understanding that Android now tries to auto guess the PIN to make pairing simpler. Perhaps the pin on your cube is 0000 or 1234, the standard pins, hence the non need to pin pair it.
bluetooth mouse works
I tried this to get a logitech bluetooth mouse paired and it worked! thanks
tarvoke said:
sorry brother, no dice I tried 4.1 and 4.2 versions too, but not really surprised it didn't do much
from what I remember of dmesg output, the firetv kept requesting a pin over and over, and not getting one
Click to expand...
Click to collapse
Have you been able to find any solution for this?
Install any APK!!! Unknown sources
dhayman11 said:
Damnit that would have been ideal. Thanks for trying
Click to expand...
Click to collapse
Hi,
Every one the settings apk does work and you can check the unknown sources box to allow installation of any apk without sideloading!!
You need the settings.apk and you have to tweak a system app. Cant give out all my secrets but it works I can install apks from any market, drop box or even when downloading from a web browser.
Fire TV is the stuff!!! Hope fire tv 2.0 offers HD audio and 4k compatibility and of course more memory :good:
Secrets?
ILLESTNOIZE said:
Hi,
Every one the settings apk does work and you can check the unknown sources box to allow installation of any apk without sideloading!!
You need the settings.apk and you have to tweak a system app. Cant give out all my secrets but it works I can install apks from any market, drop box or even when downloading from a web browser.
Fire TV is the stuff!!! Hope fire tv 2.0 offers HD audio and 4k compatibility and of course more memory :good:
Click to expand...
Click to collapse
Can't give out your secrets?! What are you, a patent lawyer? This is a forum where we all help one another. If you don't want to help, don't prate or strut your little finds.
If you look on aftvnews you can find their guide to install any app. It's a small apk called market helper.
Anyone figure out fix for bt audio lag?
vi3tl23n3gad3 said:
If you look on aftvnews you can find their guide to install any app. It's a small apk called market helper.
Anyone figure out fix for bt audio lag?
Click to expand...
Click to collapse
Hello all,
The market helper does allow for any installation of any Google Play Store app however does not allow installation from "unknown sources".
If you would like a tutorial on how to get this working please let me know and I can try to assist for a small donation to charity. Thanks.
..

Android Auto

Has anyone seen any compatibility info with the 6P and Android Auto? I am sure there should be none, but I don't know if the USB-C would make a difference. I haven't seen any Android Auto info at all for the new Nexus models.
Thx!
Doubt it would matter, USB is backwards compatible if it's micro you would just need an adapter.
PaisanNYC said:
Has anyone seen any compatibility info with the 6P and Android Auto? I am sure there should be none, but I don't know if the USB-C would make a difference. I haven't seen any Android Auto info at all for the new Nexus models.
Thx!
Click to expand...
Click to collapse
Should hopefully work like normally, I'm gonna be using the USB-C to USB-A cable that comes in box for my car for Android Auto. Hopefully it works without any issues otherwise this would be a huge over site by Google and a huge deal-breaker for me because no way I'm not driving around with Android Auto (it has completely changed my commutes.)
Badouken said:
Should hopefully work like normally, I'm gonna be using the USB-C to USB-A cable that comes in box for my car for Android Auto. Hopefully it works without any issues otherwise this would be a huge over site by Google and a huge deal-breaker for me because no way I'm not driving around with Android Auto (it has completely changed my commutes.)
Click to expand...
Click to collapse
I agree. Android Auto makes my long commute that much bearable. Now that Amazon Prime Music works with Auto too? Sweet
Badouken said:
Should hopefully work like normally, I'm gonna be using the USB-C to USB-A cable that comes in box for my car for Android Auto. Hopefully it works without any issues otherwise this would be a huge over site by Google and a huge deal-breaker for me because no way I'm not driving around with Android Auto (it has completely changed my commutes.)
Click to expand...
Click to collapse
How's it worked out so far for you? I have no issues, so far so good. Always good to hear from other AA users since there aren't too many of us out there (yet)
Mine works fine using the cable I bought from Google.
PaisanNYC said:
How's it worked out so far for you? I have no issues, so far so good. Always good to hear from other AA users since there aren't too many of us out there (yet)
Click to expand...
Click to collapse
Ive had no issues so far! Its been amazing! Ive just been using the USB-C to USB-A cable that came with the 6P. Its the perfect length for this kinda thing!
I haven't had any problem at all. That short adapter cable is the perfect size for this. I just bought another, longer cable to use at home.
midas69 said:
I haven't had any problem at all. That short adapter cable is the perfect size for this. I just bought another, longer cable to use at home.
Click to expand...
Click to collapse
Same here. I had my installer put the USB port in where the cigarette lighter plug was (I had two of these on my dash). So I bought a Brodit Proclip mount and the short USB OEM cable works great
What do you guys choose for a USB option when you plug in your device? I tried all the options and my car and AA app don't seem to recognize. Will try a new cable this afternoon.
MoNsTeReNeRgY22 said:
What do you guys choose for a USB option when you plug in your device? I tried all the options and my car and AA app don't seem to recognize. Will try a new cable this afternoon.
Click to expand...
Click to collapse
Make sure you have android debugging on. It won't work without it.
Sent from my Nexus 6P using Tapatalk
jaben2 said:
Make sure you have android debugging on. It won't work without it.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
That's not true. I'm using a USB A to C cable I ordered from Google and it works fine on a 4100NEX.
Thanks for the responses.
It ended up being a setting on my headunit that was incorrect. It was set by default to use MirrorLink and not Android Auto, switched it up and now works perfectly! :good:
Would like to reopen this discussion as I'm buying a VW Golf TSI 2016 that has a factory installed Android Auto unit. I tried it at the dealership and it was a pain to initially connect my N6P with original USB-C to USB-A cable. It did eventually work but I had to turn on debugging, remove my lock screen pattern/security (unit in the car was saying the phone was locked and it couldn't access it but it wasn't?) ... It ultimately worked but it was a pain to setup really (took over 10 minutes). And then Maps and phone worked, Google Music wouldn't had to unplug, force close Google Music and then replug and it worked ... I tried it in a 2016 Honda Civic too while shopping and fumbled around for 20+ minutes to get it to connect ; no luck. It bluetooth paired but it was like I hadn't plugged anything in the USB port.
Of note ; in both case I compared with iPhones/Car Play : plug it in and within 3 to 5 seconds, everything is setup.
I'd be curious to see if anyone here has experience with 2016 VWs and how easy (or hard) it is to get it to connect? If I have to fumble around in the settings for a few minutes everytime I get in the car, that's a major bummer. Will try again tonight before signing paperwork.
bennyboy_84 said:
Would like to reopen this discussion as I'm buying a VW Golf TSI 2016 that has a factory installed Android Auto unit. I tried it at the dealership and it was a pain to initially connect my N6P with original USB-C to USB-A cable. It did eventually work but I had to turn on debugging, remove my lock screen pattern/security (unit in the car was saying the phone was locked and it couldn't access it but it wasn't?) ... It ultimately worked but it was a pain to setup really (took over 10 minutes). And then Maps and phone worked, Google Music wouldn't had to unplug, force close Google Music and then replug and it worked ... I tried it in a 2016 Honda Civic too while shopping and fumbled around for 20+ minutes to get it to connect ; no luck. It bluetooth paired but it was like I hadn't plugged anything in the USB port.
Of note ; in both case I compared with iPhones/Car Play : plug it in and within 3 to 5 seconds, everything is setup.
I'd be curious to see if anyone here has experience with 2016 VWs and how easy (or hard) it is to get it to connect? If I have to fumble around in the settings for a few minutes everytime I get in the car, that's a major bummer. Will try again tonight before signing paperwork.
Click to expand...
Click to collapse
Sounds like an issue with VW. My Android Auto (non-VW), set up fine. And to this day, I can use Android Auto without disabling my pattern lock.
PaisanNYC said:
Sounds like an issue with VW. My Android Auto (non-VW), set up fine. And to this day, I can use Android Auto without disabling my pattern lock.
Click to expand...
Click to collapse
Ok so ended up buying the VW and Android Auto took some time to setup the first time around but nothing as painful as when I was at the dealership. So far, 98% of the time I plugged my phone in Android Auto started within 5 seconds or so. On 2 occasions it failed to launch. One time it was kind of stuck in a loop where it would connect via Bluetooth, disconnect, try to connect via USB, fail, reconnect via Bluetooth, disconnect (and start over again endlessly). I had to unplug it and restart the car for it to work but that happened only once so...
Everything works flawlessly and is well integrated with the VW infotainment system (Google Maps voice instructions will play on top of FM radio or Sirius XM and only lower the volume of whatever is playing a tadbit, I actually did not expect that (I was expecting the sound to cut completely and then come back once Google Maps is done telling me XYZ instruction)).
2016 Kia Optimia & N6P Connection Issues
Hello,
I have a new 2016 Kia Optima and I'm been fooling around with this for 2 weeks and I can't get it connected. Here's what I've done.
-tried different cables which includes the short one that was shipped with the unit
- factory reset of the device
- turned degging off and on
- uninstalled the android app
- turned wireless off and removed the connection (that's what the Kia rep told me to do)
The only thing that I get when connected it the options to choose what to do when connected via USB. I've toggle all of them and have toggled the off and on ADD new cars to android auto button till I'm blue in the face.
Right now I'm all out for suggestions. Does anyone have any idea? It will be greatly appreciated.
Thanks,
Ron
Anyone else having a problem with no notification sound when receiving a text message. I can see the message pop up on screen but I have to be looking at the screen or I will miss the message. Happens with Messenger and Hangouts. Nexus 6P is full stock with latest firmware. Head unit is a Kenwood DDX9702S with the latest firmware.
gwojo22 said:
Anyone else having a problem with no notification sound when receiving a text message. I can see the message pop up on screen but I have to be looking at the screen or I will miss the message. Happens with Messenger and Hangouts. Nexus 6P is full stock with latest firmware. Head unit is a Kenwood DDX9702S with the latest firmware.
Click to expand...
Click to collapse
Have you tried raising the 'alert' level, available at the right side of the screen when you adjust volume levels?
Solutions Etcetera said:
Have you tried raising the 'alert' level, available at the right side of the screen when you adjust volume levels?
Click to expand...
Click to collapse
I'm having the same problem. Will try that and report back.

Can someone can try "Headunit" ?

Hello everyone !
If I understood well, it's possible to install Android apps on a Nook Touch ?
If yes is it possible for someone who has a Nook Touch to try this app : http://forum.xda-developers.com/general/paid-software/android-4-1-headunit-android-auto-t3125252
It's an app to connect a Android phone using "Android Auto" to a tablet. I really want to know if this is working as the EINK displays are way better to put in a car (for the sun) and we don't need a high refresh rate !
stadros83 said:
Hello everyone !
If I understood well, it's possible to install Android apps on a Nook Touch ?
If yes is it possible for someone who has a Nook Touch to try this app : http://forum.xda-developers.com/general/paid-software/android-4-1-headunit-android-auto-t3125252
It's an app to connect a Android phone using "Android Auto" to a tablet. I really want to know if this is working as the EINK displays are way better to put in a car (for the sun) and we don't need a high refresh rate !
Click to expand...
Click to collapse
Nope. It says it's for Android 4.1+
The NST runs 2.1
Too bad .
Thanks.
Of course the new Nook Glow Plus would probably work, it's 4.4.2
It's a quicker display than the old Nook and at 300 DPI, sharper too.
Also, the light is pretty good.
That's good to know !
Does someone has it and can test this app ?
stadros83 said:
That's good to know !
Does someone has it and can test this app ?
Click to expand...
Click to collapse
It works. Well, it installs and give a nasty error message about not supporting USB Host Mode (Renate can probably help understand what that all means). Attached is a screenshot...
Not to dissuade you from your pursuit of an eink unit for the car,
but the Nexus 7 2013 is a pretty good device, nice car size,
good USB host working already, Marshmallow (6.0) and you can find them new for $150.
In any case, I'm certainly interested in getting USB host working on the NGP.
spedinfargo said:
It works. Well, it installs and give a nasty error message about not supporting USB Host Mode (Renate can probably help understand what that all means). Attached is a screenshot...
Click to expand...
Click to collapse
Thanks a lot for your time/test !
Renate NST said:
Not to dissuade you from your pursuit of an eink unit for the car,
but the Nexus 7 2013 is a pretty good device, nice car size,
good USB host working already, Marshmallow (6.0) and you can find them new for $150.
In any case, I'm certainly interested in getting USB host working on the NGP.
Click to expand...
Click to collapse
I already tried tablets in my car but same problem with any phone : the sun .
I have a cab, so I'm looking for a screen which can be used if there is a lot of light ! (and I also like to play with new things ...)
It's funny, I've never had any dealings with the USB API in Android.
I've just used the underlying Linux layer.
I wonder if there are cases where there is actual USB host mode, but the Android API was never implemented correctly?
The simplest test for basic host connectivity is connecting an OTG adapter and a regular USB keyboard.
The shift lock key should turn the shift LED on and off.
What does the headunit software want to talk to over USB?
Could it be done over a serial link instead?
Renate NST said:
It's funny, I've never had any dealings with the USB API in Android.
I've just used the underlying Linux layer.
I wonder if there are cases where there is actual USB host mode, but the Android API was never implemented correctly?
The simplest test for basic host connectivity is connecting an OTG adapter and a regular USB keyboard.
The shift lock key should turn the shift LED on and off.
What does the headunit software want to talk to over USB?
Could it be done over a serial link instead?
Click to expand...
Click to collapse
Honestly I don't know !
stadros83 said:
Honestly I don't know !
Click to expand...
Click to collapse
Well, what do you plug it into?
Renate NST said:
Well, what do you plug it into?
Click to expand...
Click to collapse
Ah sorry I did not understand your question.
For this you need to plug a smartphone (android 5 at least).
It transforms the tablet in an Android Auto display (like a radio).
But if you have technicals questions about the app you should see with the developper, I'm only a single user .
Oh, I'm a little slow on the uptake.
The idea is to just mirror the display on your separate mobile phone?
I looked a bit more into the USB host mode.
I could be wrong, but it seems that the PCB is not even populated to connect the ID pin on the USB connector.
Of course there must be some software hack to force it into host mode.
Renate NST said:
Oh, I'm a little slow on the uptake.
The idea is to just mirror the display on your separate mobile phone?
Click to expand...
Click to collapse
Yes, sorry I'm not clear !
I looked a bit more into the USB host mode.
I could be wrong, but it seems that the PCB is not even populated to connect the ID pin on the USB connector.
Of course there must be some software hack to force it into host mode.
Click to expand...
Click to collapse
You mean software on the Nook or in the headunit app ?

Can someone with 1024x600 RK3188 Joying try backing up and uploading mirroring app?

Had to do a factory reset on my headunit because it wouldn't boot. After factory reset the mirroring app is gone. Contacted support and they let me know once it has been reset, it's too late. Can someone try backing the app up to an APK and uploading to see if I can use it?
I can do it for ya tomorrow.
ludester said:
I can do it for ya tomorrow.
Click to expand...
Click to collapse
Hey, never heard from you after this; was hoping maybe you could still help me out. Thanks for the offer and no worries if youre busy or something now
imranh101 said:
Hey, never heard from you after this; was hoping maybe you could still help me out. Thanks for the offer and no worries if youre busy or something now
Click to expand...
Click to collapse
files attached, try it out and let me know
The mirror app has not gone (only the shortcut from jeg desktop has gone) you just have to install it again from the OEM icon on the units desktop. Select the OEM icon, select APK and find the Easyconnect app in the listing. Push it to install it.
HenrikH29 said:
The mirror app has not gone (only the shortcut from jeg desktop has gone) you just have to install it again from the OEM icon on the units desktop. Select the OEM icon, select APK and find the Easyconnect app in the listing. Push it to install it.
Click to expand...
Click to collapse
W.... Wow. I contacted the customer support and they said "Once the unit has been factory reset you will not be able to use the connect function anymore"
Thank you, gentleman and scholar! It does not want to see to want to connect to my phone but I'll chalk that up to the program being buggy and needing a different USB cable.
imranh101 said:
W.... Wow. I contacted the customer support and they said "Once the unit has been factory reset you will not be able to use the connect function anymore"
Thank you, gentleman and scholar! It does not want to see to want to connect to my phone but I'll chalk that up to the program being buggy and needing a different USB cable.
Click to expand...
Click to collapse
They say the same on their homepage (that its gone after reset) - but we know better
BTW i haven't succeeded either in connecting my iPhone using the connect function. No big deal, I can't se what i would use it for. Almost any program i could think of mirroring to the unit can be installed directly on the unit, so why bother with mirroring
ludester said:
files attached, try it out and let me know
Click to expand...
Click to collapse
Is it the last in Malaysk?
Inviato dal mio SM-G920F utilizzando Tapatalk
FWIW, the EasyConnected app doesn't work with iOS 9 AirPlay mirroring (same as most other third party mirroring apps).
If you are looking for an alternative, Splashtop's Mirroring 360 works well for me on my Joying HU.
Tabs78 said:
Is it the last in Malaysk?
Inviato dal mio SM-G920F utilizzando Tapatalk
Click to expand...
Click to collapse
Yes it is, and it is working:good:
Can you confirm either installing from the OEM folder, or the download worked? I want to install malaysk ROM, but I have the same issue, need the mirroring, and now joying have also responded "fac reset will erase license and you only get 1". I really dont get this approach, they shpuld give better info, but anyway, hoping you had an update on this.
Also, how well does it work overall? I am just getting started, so any heads up would be great.
I had the Easy Connect app working fine with my phone prior to installing Malaysk's ROM. After reinstalling Easy Connect, I had my phone connect once, then the HU told me that the cable was bad, and now I cannot connect at all (Keep getting 0x11 error).
Any suggestions on how to make it work again?
I can now state that installing Malaysk's ROM and reinstalling Easy Connect does work*. I am pleased to say that I have used the screen mirroring to my satisfaction. (But, I cannot say what happened to get it to work, it just kind of happened).
Unfortunately, the phone initially goes into "Drive Mode" which, aside from being annoying, does not allow use of the Head Unit's screen. So, I must fiddle with my phone even longer in order to get out of that mode so I can use the mirroring correctly.
I also have not found a good way to force the phone to be in landscape mode. The one app I found that put it into that mode correctly had issues that interfered with other phone features to such an extent that I decided removing the app was my best option.
*This assumes the phone and Head Unit paired in the first place. My first Head Unit (Single Core) would never pair at all (before or after root).
My phone (HTC M8) just updated to the latest ROM (Marshmallow, maybe), and now Easy Connected does not work. It goes through all the motions, but the Head Until stays dark. Hopefully something changes soon.
NYCAR said:
My phone (HTC M8) just updated to the latest ROM (Marshmallow, maybe), and now Easy Connected does not work. It goes through all the motions, but the Head Until stays dark. Hopefully something changes soon.
Click to expand...
Click to collapse
Same issue here with the head unit staying dark. Any update here?
Update EasyConnected.
See this thread
Hey everybody i have a problem with Easy connected in Honda connect by HRV and i have an error 0x11 its adb-ec not found not exist. Whats is this?

Categories

Resources