Netflix FHD fix - Thinkpad Tablet General

This is a quick guide on how to fix the Netflix FHD problem. The problem is actually that even if the device is Widevine L1 certified but is not Neftlix certified then HD content wont play. There are a few dirty ways to bypass this. I will write three ways​Some things before we start:
I am not responsible for any damage to the device or data loss.
Backup important data just in case!
Method 1. Downloading patched apk:
Download the patched apk from here.
Install the apk.
Open Netflix and sign-in.
Enjoy!
The easiest method but the app version is old (4.16.3) and if you update the app the patch will be lost.
Method 2. Using Lucky Patcher:
Download and install lucky patcher from here (Use LP Installer).
Download Netflix 7.44 from here.
Now you have two ways to install the .apkm file.
Using "ApkMirror Installer":
Download and install "ApkMirror Installer" from Play Store or APKMirror.
Open apkm file from file browser with "ApkMirror Installer" and install it.
Using "App Manager":
Download and install "App Manager" from F-Droid.
Open apkm file from file browser with "App Manager" and install it.
Launch the app to check if it is working but do not update!
Close the app and launch Lucky Patcher.
On the left side menu tap "Update lucky patcher" and install the update (if one is available)
Then on the same menu tap "Download custom patches"
After the operation is finished go to main screen of Lucky Patcher and select Netflix
Tap "Menu of Patches" -> "CustomPatch-applied APK" ->Check "Signature verification killer" -> "Rebuild The App" -> "Go To File" -> "Uninstall and install"
Open Netflix and sign-in.
Enjoy!
Slightly more complex method but you have a more recent version of Netflix
Method 3 [ROOT]:
Install Magisk and root your device.
Download and install with Magisk this module from here
Uninstall Netflix completely.
Restart your device.
Download and install latest Netflix version.
Open Netflix and sign-in.
Enjoy!
The most advanced way because it needs a rooted device but works with every version (at least for now) but beware since this patch changes the device model name it might brake some stuff.
Also if you want to revert back to original model name just uninstall the module.
I tested the three methods on Lenovo TB-X606F and the two first on LG Q7 and worked nicely.

be very careful, this has all the appearance of "data theft", something similar as "keylogger" in windows.

JhonsonOG said:
be very careful, this has all the appearance of "data theft", something similar as "keylogger" in windows.
Click to expand...
Click to collapse
More information? Proof? Don't just say. At least 2 method is open-source, where the "data theft" code?

Related

How to fix crashing Google Play services

A recent update to the Google Play services makes it crash, regardless of Android version. This is how i fixed it:
Requirements:
Root
A root file explorer
Google Play services APK (make sure to select right Android version and use arm + nodpi): http://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-10-0-84-release/
System app remover: https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
Instructions:
Disable WiFi.
Use System app remover to uninstall Google Play services, this will make it revert to the factory supplied version.
Install the Google Play services apk. The 10.0.84 is the latest working version accordning to my tests.
Create two folders in \data\app and name them com.google.android.gms-1.apk and com.google.android.gms-2.apk. This will stop Google Play services from auto updating. You should be able to create at least one. Do not overwrite any existing file.
Restart and enable WiFi.
Credits:
ConnCarl: https://forum.xda-developers.com/android/help/delete-disable-downgrade-prevent-update-t3091832
Some additional steps to the above.
If Google Play is broken, like it was on mine, you can't download the System app remover. I got it from http://www.apkmirror.com/apk/jumobi...-root-3-6-2019-android-apk-download/download/
(I do not know if that site is safe.)
Download APK to PC, transfer it over USB, and install it with Terminal Emulator.
Also, if you cannot download a File Explorer since Google Play is broken, try some APK like http://www.apkmirror.com/apk/es-glo...-manager-4-1-6-android-apk-download/download/
(again, no idea if that site is safe.)
and install it via Terminal...
Then finally you can click the Google Play services APK. (Or just install it via terminal since by now you know how to...)
NOTE: if you have TF101 with KatKiss 4.4.4 you can't use the one marked Android 4.4W+, it fails and you will wasting hours of your time like I did - use the Android 2.3 version.
---------- Post added at 02:53 AM ---------- Previous post was at 01:53 AM ----------
After spending 3 hours of figuring out all the above details, I still got the "has stopped" popups, because I had created the file names in terminal as gsm instead of gms. Details are important...
I should add that I did get it working, with my manual installations etc. Thanks!
Works for hours, then PlayServices autoupdate... try 2 times.
Im using katkiss 6.0
My problem is that while trying to flash KK6.0 again it gets stuck on the "Checking connection" step and it continuously prompts the famous "Unfortunately, Google Play services has stopped". I have flashed old gapps (1st Feb) but problem persists.
I know there is a general issue about a gplay/gservices version but I am not sure how to proceed now....
This is my solution for Transformer TF101 on firmware KatKiss 4.4.4:
Install Lucky Patcher from here: dl1.revdownload.com/dl1/1701/Lucky_Patcher_v6.4.5__5557_Revdl.com.apk
Open Lucky Patcher, select "Search", type "Google"
Uninstall "Google Play", "Google Play Services" (I also uninstalled "Google App" forever cause I needn't it)
Download open gapps on 2017-07-31 from here: github.com/opengapps/arm/releases/download/20160731/open_gapps-arm-4.4-pico-20160731.zip
Disable Wi-fi
Reboot to TWRP recovery
Flash gapps, wipe cache/dalvik.
Now boot and create 2 folders in /data/app - com.google.android.gms-1.apk and com.google.android.gms-2.apk
Now you can turn on your Wi-fi
Here's my solution about installing right version of Youtube for this gapps and prevent Youtube app from updating. There's ZipSigner app which changes a certificate and "detaches" the app from Google Play. For Youtube app this method causes failure on startup with a security exception. Luckily, I've found another solution:
The latest working version is 11.41.56 on October 28, 2016. Download Youtube app from here: apkmirror.com/apk/google-inc/youtube/youtube-11-41-56-release/youtube-11-41-56-21-android-apk-download/download
Disable Wi-fi
Uninstall current Youtube using Lucky Patcher
Now install downloaded version of Youtube
Create a folder com.google.android.youtube-2.apk in /data/app. There should be 1 file com.google.android.youtube-1.apk and 1 folder com.google.android.youtube-2.apk.
This solution should prevent a Youtube app from being updated by Google Play: it begins to update but at the end dialog shown which says there's insufficient storage space.
By the way, you can prevent auto-update for another Google app like Google Drive. Open Lucky Patcher, click on the app and select "App Info" and you'll see a detailed info. All you need to do is to create a folder with name like apk but "-1.apk" has to be replaced with "-2.apk"
Turn on Wi-fi
Phew, good to know it wasn't only me. I've been having this Services issue for some time now on the old 4.4.4 KatKiss, googling for it, updated to 6.0.1 but the problem starts as soon as I even try to install Google Play Services in any way (either flashing GAPPS or installing afterwards with an apk). The device works fine without the Services, but then I can't use Google Play...
So is it yet known who are affected? Is this only a TF101 problem, or are other devices (also non-ASUS ones) also affected? Or is this a KatKiss issue? Or what?
I don't feel like blocking Google from updating the services, that sounds like a stopgap solution that probably makes Services unusable in the long run. Hoping that e.g. Google fixes this problem with a new update...
Solution to my problem... But still need to wait until mr. Google decides to solve it
https://redirect.viglink.com/?forma...t=https://www.youtube.com/watch?v=L5XjF6sPef4
timppu said:
So is it yet known who are affected? Is this only a TF101 problem, or are other devices (also non-ASUS ones) also affected? Or is this a KatKiss issue? Or what?
I don't feel like blocking Google from updating the services, that sounds like a stopgap solution that probably makes Services unusable in the long run. Hoping that e.g. Google fixes this problem with a new update...
Click to expand...
Click to collapse
Yes, there are a lot of devices which faced with this issue. The reason why Google Services stopped working is so-called NEON instruction set for ARM chips. Our tablet has Nvidia Tegra 2 chip which does not support such command set! And no, that will not be fixed!
Here's a quote from the forum (bit.ly/2luHVwu):
If this started on or about the 9th it is due to Google putting ARM neon code into the last update. Older ARM chips do not have neon code functionality and are therefore screwed.
My 6 year old Asus TF101 with a Tegra 2 processor was still running like a champ with android 6.0.1 until last week.
Click to expand...
Click to collapse
Forget Google, I am on AmazonApp now Shame on you, Google. Also set my search engine back on old Yahoo
ignasigh said:
My problem is that while trying to flash KK6.0 again it gets stuck on the "Checking connection" step and it continuously prompts the famous "Unfortunately, Google Play services has stopped". I have flashed old gapps (1st Feb) but problem persists.
I know there is a general issue about a gplay/gservices version but I am not sure how to proceed now....
Click to expand...
Click to collapse
I was having it stop at the "Checking Connection" step too, realized I was using the 2017 gapps package instead of the 2016 one. Check to see if you're using the correct one. However, I'm still having the "Google Services" issue.
dape16 said:
A recent update to the Google Play services makes it crash, regardless of Android version. This is how i fixed it:
Requirements:
Root
A root file explorer
Google Play services APK (make sure to select right Android version and use arm + nodpi): http://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-10-0-84-release/
System app remover: https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
Instructions:
Disable WiFi.
Use System app remover to uninstall Google Play services, this will make it revert to the factory supplied version.
Install the Google Play services apk. The 10.0.84 is the latest working version accordning to my tests.
Create two folders in \data\app and name them com.google.android.gms-1.apk and com.google.android.gms-2.apk. This will stop Google Play services from auto updating. You should be able to create at least one. Do not overwrite any existing file.
Restart and enable WiFi.
Credits:
ConnCarl: https://forum.xda-developers.com/android/help/delete-disable-downgrade-prevent-update-t3091832
Click to expand...
Click to collapse
I was finally able to get it to work but had to omit the .apk part of the two folder names. UPDATE: sorry, that actually didn't work, in fact, at the moment, no matter what I try, I cannot stop it from updating at some point and having to start all over again...
I rolled back to ASUS 4.0.3 original firmware.
It is working fine for the last 5 days, as long you do not update any of Google apps. The original firmware still has Google Talk pre-installed.
The original firmware is so so slow, when compared with KatKiss 6.0.1 or KatKiss 4.4.4, but at least it is working fine. No FCs at all.
Please note that there are some recent apps that do not work with Ice Cream Sandwich (Android 4.0.3).
[]'s
Version Matters
kenpoh said:
I was finally able to get it to work but had to omit the .apk part of the two folder names.
Click to expand...
Click to collapse
Kenpoh, what version of KatKiss?
I found the format of the info in the /data/apps folder different from 4.4.4 to 5.1 to 6.0. I was unable to get things to work with fresh 5.1 ROM flashes so went to 4.4.4 and creating the folder with the "-2.apk" worked in 4.4.4. I think the bottom line is you have to create a folder name that is the same name as the .apk file (with a -2) to "confuse" the auto-update.
Now that I know I can get 4.4.4 to work, I'll see if I can get 5.1 and/or 6.0 to work and share my findings.
UPDATE
OK - I gave up 6.0 required setup a WiFi connection before fully booting. 5.1 wouldn't let me load ES File Explorer from the terminal (failure uri something or other).
For 4.4.4, I:
- Downloaded ROM, SU, GAPPS, Google Play Services 10.0.84 from apkmirror.com
- Did a clean flash
- booted up installed ES File Explorer from terminal
- installed GPS 10.0.84
- reboot
- create folder using the "-2"
- reboot
All is well. I let everything update (including Google Play Games) and everything is running just fine.
Exterminator13 said:
This is my solution for Transformer TF101 on firmware KatKiss 4.4.4:
Install Lucky Patcher from here: dl1.revdownload.com/dl1/1701/Lucky_Patcher_v6.4.5__5557_Revdl.com.apk
Open Lucky Patcher, select "Search", type "Google"
Uninstall "Google Play", "Google Play Services" (I also uninstalled "Google App" forever cause I needn't it)
Download open gapps on 2017-07-31 from here: github.com/opengapps/arm/releases/download/20160731/open_gapps-arm-4.4-pico-20160731.zip
Disable Wi-fi
Reboot to TWRP recovery
Flash gapps, wipe cache/dalvik.
Now boot and create 2 folders in /data/app - com.google.android.gms-1.apk and com.google.android.gms-2.apk
Now you can turn on your Wi-fi
Here's my solution about installing right version of Youtube for this gapps and prevent Youtube app from updating. There's ZipSigner app which changes a certificate and "detaches" the app from Google Play. For Youtube app this method causes failure on startup with a security exception. Luckily, I've found another solution:
The latest working version is 11.41.56 on October 28, 2016. Download Youtube app from here: apkmirror.com/apk/google-inc/youtube/youtube-11-41-56-release/youtube-11-41-56-21-android-apk-download/download
Disable Wi-fi
Uninstall current Youtube using Lucky Patcher
Now install downloaded version of Youtube
Create a folder com.google.android.youtube-2.apk in /data/app. There should be 1 file com.google.android.youtube-1.apk and 1 folder com.google.android.youtube-2.apk.
This solution should prevent a Youtube app from being updated by Google Play: it begins to update but at the end dialog shown which says there's insufficient storage space.
By the way, you can prevent auto-update for another Google app like Google Drive. Open Lucky Patcher, click on the app and select "App Info" and you'll see a detailed info. All you need to do is to create a folder with name like apk but "-1.apk" has to be replaced with "-2.apk"
Turn on Wi-fi
Click to expand...
Click to collapse
Thank you very much for your post. It worked flawlessly!!!
I have a Moto Xoom which is also a Tegra 2 Non-Neon device that is experiencing this Google Play Services issue -
I just had a one-on-one chat with Google support. Since I am running a rooted Moto Xoom (Omni 4.4.4), the only advice Google one-on-one support could provide was to unroot and revert back to Stock (which is 4.1.2. on the Xoom) and/or contact Motorola for support. Google seems to be unwilling to investigate fixes unless folks that are running UNROOTED Tegra2 Non-Neon devices are also experiencing the same issue.
So, if you are running a non-rooted Tegra2 device (like your ASUS TF101's) and are having this issue, please contact Google one-on-one support and let them know via https://support.google.com/googlepla...l=en#contact=1
Apaco said:
UPDATE
OK - I gave up 6.0 required setup a WiFi connection before fully booting. 5.1 wouldn't let me load ES File Explorer from the terminal (failure uri something or other).
Click to expand...
Click to collapse
For 6.0, I rebooted after first boot, then the "Skip >" option showed up during the wifi connection setup screen.
Google Maps not working
---------- Post added at 09:55 PM ---------- Previous post was at 09:47 PM ----------
Everybody please post here, maybe Google will read:
https://productforums.google.com/forum/#!topic/play/qBah52BAQxY;context-place=forum/play
Alvera said:
Everybody please post here, maybe Google will read:
https://productforums.google.com/forum/#!topic/play/qBah52BAQxY;context-place=forum/play
Click to expand...
Click to collapse
Things may escalate faster if you try their one-on-one support via https://support.google.com/googlepla...l=en#contact=1
This worked! Thanks OP. As a bonus tip you can also do this from TWRP: Use the TWRP terminal emulator, switch to /data/app/ and mkdir the aformentioned gms-1 and gms-2 apk dummies.

Note 8 Live Draw on 955U with PartCyborg ROM

Hello all! I've noticed that the PartCyborg ROM does not have the "Secure Startup" option! Without that option you cannot install the Live Messages keyboard without root!
I found a fix for the problem which does require root(but if you have this ROM you already have it!)
Download the included zip and extract from : https://forum.xda-developers.com/galaxy-s8/how-to/how-to-install-live-drawings-note8-root-t3668023
Install "System App Remover" https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en
Install lucky patcher https://www.luckypatchers.com/download/
Once all of the apps are installed and you have extracted the ZIP file, you can now begin.
1. Launch System App Remover and remove the "Samsung Keyboard". (It will say key module but don't worry! Phone works without it and backs up the app if you need to restore)
2. Reboot Phone (Yes the phone will boot without the keyboard)
3. Upon reboot open LuckyPatcher and install LiveMessages
4. Now install Keyboard APK as sytem app in LuckyPatcher menu
5. Reboot the phone and you should be good!
Also, you might need Xposed installed, you can head on to Google on how to flash Xposed with a locked bootloader.
Hope this helps you guys out, I really wanted LiveMessages working on my S8+ with the Cyborg ROM and I finally got it working!

Oneplus 8T (Cyberpunk Edition) - HydrogenOS (Google Apps, Theme, OTA Updates!)

Originality/HydrogenOS
If you have a Chinese Cyberpunk Edition phone with OxygenOS, you'll notice that the Cyberpunk theme/assets are missing, and OTA updates lead to a boot loop. This guide will tell you how to restore the phone to its original software (HydrogenOS), unlock the bootloader, root it, and get Google Apps working. If you are American, this is the golden ticket. OTA updates will work and you will get the original theme/assets back.
I have made this guide because I purchased a Cyberpunk phone and the vendor installed OxygenOS. The Chinese Cyberpunk Edition phones are meant to use HydrogenOS. OxygenOS is not currently designed for the Chinese Cyberpunk Edition phones, despite many vendors installing it. I've spoken to Oneplus and it doesn't appear there are immediate plans to support the phone using OxygenOS.
This information is only for Chinese Cyberpunk Edition phones.
Rooting the phone is optional if you just want Google Apps.
Proceed at your own risk.
Setting Up
You're going to need to download and install these things for the remainder of the guide.
Minimal ADB/Fastboot (Download)
Oneplus USB Drivers (Download)
Qualcomm USB Drivers (Download)
If you've already been toying with the phone, you might already have these. If so, skip ahead.
Restoring HydrogenOS (Credit: Some_Random_Username)
You are going to want to download the MSM Download Tool, designed for Chinese KB2000 phones. This tool will wipe your phone and restore the original HydrogenOS software, as well as your Cyberpunk theme/assets.
You will need to download the tool here:
https://androidfilehost.com/?w=files&flid=320230 (Credit: g96818)
Rootk1t said:
https://androidfilehost.com/?fid=10763459528675590014 or https://drive.google.com/file/d/1-MwwMBiszDvAoCoqH1P5aZRaLvDFL_66/view
The difference is only in HOS version.
If your phone is made after march 2021, i suggest using latest one HOS MSM (google link).
Click to expand...
Click to collapse
After downloading:
Extract the archive to a folder.
Remove any Chinese characters from folder names (if applicable).
Open "MsmDownloadTool V4.0".
Under "User Type", select "Others".
Click "Next".
Notice that "Target" is selected on the dropdown in the top-right of the window.
Change the option from "Target" to "H2" instead.
Now make sure your phone is ready:
Turn your phone off and wait a few seconds.
Press the "Start" button on the tool.
Hold both volume buttons down, while plugging your phone in through USB (to enter Qualcomm EDL mode).
The download tool will begin to work it's magic (should take 200-300 seconds).
Once it says "Download Complete", your phone should reboot into HydrogenOS.
Close the tool completely.
Perform the phone's setup, then decide whether you want to root the phone, or just install Google Apps. Your phone will be wiped if you unlock the bootloader.
If your device wasn't detected when running the tool, make sure you have the Qualcomm USB driver installed. To do this, open device manager. Under "QHUSB_BULK", select "Update Driver Software", and use the .cab file you found earlier.
Unlock the Bootloader (Optional)
Before you may root the phone, you will need to do the following.
Enable Developer Mode:
Open your Settings application and go to "About Phone".
Tap the section that says "Build Number" five times consecutively.
You will now have developer mode.
Enable OEM Unlocking/USB debugging:
Open your Settings application and click the search button.
Search for and enable the option: "OEM unlocking".
Search for and enable the option: "USB debugging".
You will be asked if you want to trust the device when it's plugged in. Click "Allow".
You will want to do the following, using the ADB/Fastboot you downloaded:
Make sure your phone is plugged in.
Run the following:
adb reboot bootloader
Your phone will reboot into the bootloader.
Run the following:
fastboot oem unlock
Use the volume/power buttons on your phone, to confirm.
Your phone will reboot and wipe itself, as well the Chinese applications. Perform the phone's normal setup again.
The bloatware and Chinese apps will return when you perform an OTA update at the end of the guide. They can also be removed/disabled.
Rooting (Optional)(Credit: DroidFreak32)
To root the phone we will be installing Magisk, using a patched boot.img from your current version of HydrogenOS. In this case, we are using version 11.0.1.2 (the version of the MSM Download Tool). I will be providing the boot.img from my phone, which I have used personally.
You will want to download the following:
Patched 11.0.1.2 Boot.img (Download)
Canary Magisk Manager (Download)
Preparation:
Re-enable developer mode, as well as USB debugging. Just like you did in the previous section.
Transfer the app-debug.apk to your phone, and install it through the phone's file manager.
Copy "magisk_patched_11.0.1.2.img" to your computer's ADB directory.
Rooting:
Run the following:
adb reboot bootloader
Your phone will reboot into the bootloader.
Run the following:
fastboot boot magisk_patched_11.0.1.2.img
Your phone will reboot, using the patched boot.img.
Enter the Magisk Manager app you installed earlier.
Tap Magisk (Install) -> Perform Direct Install
You will have root on reboot!
If Magisk says it needs to reboot to apply changes, you will need to follow the last set of steps again.
If for some reason the boot.img I provided doesn't work, you will need to follow DroidFreak32's guide. His guide is very detailed and will instruct you on how to create your own patched boot.img and root the phone.
Installing Google Apps (Credit: Steve0007 and @xxxrichievxxx)
To install, you will want to obtain a copy of the Google Play Store from a 3rd Party. @xxxrichievxxx suggested this solution, which worked for me regardless of unlock/root status.
You'll want to download, copy, and run the newest version from your device:
https://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-23-1-19-release/
We had also tried using WeebGapps, which has problems after updating:
https://t.me/s/WeebGAppsChannel?q=#Android_11+#magisk_mode (Requires Telegram)
Updating
Unlike on OxygenOS, you will actually be able to download and perform OTA updates, through the Settings app. If you do not follow the steps below when updating, you will lose root.
Disable your Magisk modules (if applicable) when updating, and re-enable after you have successfully updated!
I also recommend disabling "automatic system updates" via Settings, as they can break your root.
Follow these steps:
epr said:
- Go to System-Update
- Tap OK when the message that you are rooted appears
- Tap "Download and install"
- Wait until you are prompted to reboot - DO NOT REBOOT NOW!
- Open Magisk Manager, select install -> Install to inactive slot and start installation
- When Magisk has finished installing, reboot and you stay rooted with latest OTA.
Click to expand...
Click to collapse
If you are missing the Play Store after updating, install it from here. If you happen to mess up or lose Google Apps, try uninstalling/reinstalling the module.
If you do happen to lose root, you will want to follow DroidFreak32's guide, as I've only provided the patched boot.img for 11.0.1.2.
Bloatware
You're probably annoyed by all the preinstalled garbage. I've made a short script that disables the Chinese market and removes all 3rd party Chinese (By_3rd and heytap) applications.
Removing Market and Almost All 3rd Party Apps:
Visit here: https://pastebin.com/raw/3SsA1tpc
Open notepad and save the above text as a .bat file.
Copy and run the file from your ADB directory.
You will likely need to run this script each update, as applications are added back on update. I've decided to leave the other applications on my device for now. If you want to remove even more, Steve0007 recommended this resource.
Credits
Steve0007 and xxxrichievxxx for helping to find the solid solution for Google Apps.
WeebGApps for the module that installs Google Apps.
DroidFreak32 for his thread on rooting the Oneplus 8T.
Some_Random_Username and g96818 for uploading/sharing the MSM download tools.
Most of this information is compiled from other sources, so consider supporting the developers listed above.
Informative and well explained. It will definitely help a lot of users.
Very helpful, good job
Should be sticky.
sunmughans said:
Informative and well explained. It will definitely help a lot of users.
Click to expand...
Click to collapse
Hopefully it prevents some headaches. Vendors are still shipping the phones out with OxygenOS.
Steve0007 said:
Very helpful, good job
Should be sticky.
Click to expand...
Click to collapse
Wouldn't exist without your help!
Awesome! Going to try this out today
AWESOME!!!! Thank you very much!! Is google play installed as well? Last time I read something about all the google apps installed except Google play lol
Updated the bloatware section. The script will now remove 40 bloatware apps. These apps may conflict with Google Play, so I do suggest removing them.
xxxrichievxxx said:
AWESOME!!!! Thank you very much!! Is google play installed as well? Last time I read something about all the google apps installed except Google play lol
Click to expand...
Click to collapse
Google Play has installed fine in my tests. However, updating might cause it to get removed. I'd keep a copy of the APK in your phone's storage, just so you have it if you need it.
You can find it here:
https://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-23-1-19-release/
Hi, it's very strange, because on all oneplus, you can put hydrogen or oxygen without any problem.
Some people buy cyberpunk édition on Giztop or cect without any problem...very strange, no ?
Another question, IS it possible to add other language on hydrogen if de want to use it ?
Thanks
g4seb said:
Hi, it's very strange, because on all oneplus, you can put hydrogen or oxygen without any problem.
Some people buy cyberpunk édition on Giztop or cect without any problem...very strange, no ?
Another question, IS it possible to add other language on hydrogen if de want to use it ?
Thanks
Click to expand...
Click to collapse
Try this: morelocale 2
MoreLocale 2 - Apps on Google Play
This is just MoreLocale2
play.google.com
or this
Locale Language (Pro) Set Locale & Language for Android - APK Download
Download Locale Language (Pro) Set Locale & Language apk 3.5.8 for Android. This application let activate your home language (locale) with ease.
apkpure.com
Right now I recommend updating the phone before installing Google Apps.
Went though this process to update, very well detailed. I went from Oxygen OS to Hydrogen then followed the rest of the steps to install Google Play.
I made the mistake of updating via OTA after restoring Hydrogen OS and had to repeat a couple step to get to the root step then followed the rest to install Google Play.
Youll need to download the 7z software to extract MSM software and one of the files needs a Telegram account. Its a messaging app that requires a phone number to create.
Also make sure you have the drivers sorted out, I had to do a bit of trouble shooting on the qualcomm drivers.
The cyberpunk theme is pretty cool.
I am having some spotty issues with google though, after updating OTA everything was fine but occasionally I will lose the play store. I have tried to directly install the apk and reinstall the module in magisk. But there is something kicking it off. The apps that I downloaded are still there, just the play store that drops. Edit: I am on module 4.0.4. Might try 4.0.5
Testing out the apps, I cannot get the maps app to work, keeps crashing. And for some reason I cannot log in to Chrome. It wont detect the account that is already logged into the phone (gmail, youtube etc) when I sign in manually it says 'This account already on device' I have signed in and out numerous times.
This is a pretty good solution to keep the cyberpunk theme, which you want if you have this phone. I get 5g speeds on US T-Mobile and have no issues with texts and calls. If the play store was more stable this will be a solid solution.
Props to @OniAraAra for compiling this detailed guide and members who contributed
Went through the WHOLE guide and I too was able to revert back to the Cyberpunk ROM! Super COOL!!! I am extremely happy! Thank you!
Also would like to note that Android Auto also crashes
I've been reading and mentally preparing all the steps by downloading the required files and walking through them, but I've no development experience and I'm worried that if I mess up a step, I would have no idea how to unstuck myself...
For example:
If your device wasn't detected when running the tool, make sure you have the Qualcomm USB driver installed. To do this, open device manager. Under "QHUSB_BULK", select "Update Driver Software", and use the .cab file you found earlier.
Click to expand...
Click to collapse
I tried to look up my device manager on my PC and I do not see "QHUSB_BULK" so little things like that worry me
Is it possible to convert European 8T to full cyberpunk version?
jirka607 said:
Is it possible to convert European 8T to full cyberpunk version?
Click to expand...
Click to collapse
Do not use this guide for that. It will not work. There's other threads on how to install the Cyberpunk goodies for a normal 8T.
Nables said:
I've been reading and mentally preparing all the steps by downloading the required files and walking through them, but I've no development experience and I'm worried that if I mess up a step, I would have no idea how to unstuck myself...
For example:
I tried to look up my device manager on my PC and I do not see "QHUSB_BULK" so little things like that worry me
Click to expand...
Click to collapse
For the most part, any accidents are easily reversible, as there's a great guide on unbricking here:
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Arr6 said:
This is a pretty good solution to keep the cyberpunk theme, which you want if you have this phone. I get 5g speeds on US T-Mobile and have no issues with texts and calls. If the play store was more stable this will be a solid solution.
Props to @OniAraAra for compiling this detailed guide and members who contributed
Click to expand...
Click to collapse
It is as you say. Across multiple installs I've had minor issues with the Google Play store disappearing, but you can always reinstall the APK. I did not notice this until after I had made the guide.
@Steve0007 and I are looking for a more stable solution as we speak, so hopefully we'll have that soon!
OniAraAra said:
Originality/HydrogenOS
If you have a Chinese Cyberpunk Edition phone with OxygenOS, you'll notice that the Cyberpunk theme/assets are missing, and OTA updates lead to a boot loop. This guide will tell you how to restore the phone to its original software (HydrogenOS), unlock the bootloader, root it, and get Google Apps working. If you are American, this is the golden ticket. OTA updates will work and you will get the original theme/assets back.
I have made this guide because I purchased a Cyberpunk phone and the vendor installed OxygenOS. The Chinese Cyberpunk Edition phones are meant to use HydrogenOS. OxygenOS is not currently designed for the Chinese Cyberpunk Edition phones, despite many vendors installing it. I've spoken to Oneplus and it doesn't appear there are immediate plans to support the phone using OxygenOS.
This information is only for Chinese Cyberpunk Edition phones.
Proceed at your own risk.
Setting Up
You're going to need to download and install these things for the remainder of the guide.
Minimal ADB/Fastboot (Download)
Oneplus USB Drivers (Download)
Qualcomm USB Drivers (Download)
If you've already been toying with the phone, you might already have these. If so, skip ahead.
Restoring HydrogenOS (Credit: Some_Random_Username)
You are going to want to download the MSM Download Tool, designed for Chinese KB2000 phones. This tool will wipe your phone and restore the original HydrogenOS software, as well as your Cyberpunk theme/assets.
You will need to download the tool here:
https://androidfilehost.com/?w=files&flid=320230 (Credit: g96818)
After downloading:
Extract the archive to a folder.
Remove any Chinese characters from folder names (if applicable).
Open "MsmDownloadTool V4.0".
Under "User Type", select "Others".
Click "Next".
Notice that "Target" is selected on the dropdown in the top-right of the window.
Change the option from "Target" to "H2" instead.
Now make sure your phone is ready:
Turn your phone off and wait a few seconds.
Press the "Start" button on the tool.
Hold both volume buttons down, while plugging your phone in through USB (to enter Qualcomm EDL mode).
The download tool will begin to work it's magic (should take 200-300 seconds).
Once it says "Download Complete", your phone should reboot into HydrogenOS.
Close the tool completely.
Perform the phone's setup, then proceed to the next step. Your phone will be wiped again in the next step.
If your device wasn't detected when running the tool, make sure you have the Qualcomm USB driver installed. To do this, open device manager. Under "QHUSB_BULK", select "Update Driver Software", and use the .cab file you found earlier.
Unlock the Bootloader
Before you may root the phone, you will need to do the following.
Enable Developer Mode:
Open your Settings application and go to "About Phone".
Tap the section that says "Build Number" five times consecutively.
You will now have developer mode.
Enable OEM Unlocking/USB debugging:
Open your Settings application and click the search button.
Search for and enable the option: "OEM unlocking".
Search for and enable the option: "USB debugging".
You will be asked if you want to trust the device when it's plugged in. Click "Allow".
You will want to do the following, using the ADB/Fastboot you downloaded:
Make sure your phone is plugged in.
Run the following:
adb reboot bootloader
Your phone will reboot into the bootloader.
Run the following:
fastboot oem unlock
Use the volume/power buttons on your phone, to confirm.
Your phone will reboot and wipe itself, as well the Chinese applications. Perform the phone's normal setup again.
The bloatware and Chinese apps will return when you perform an OTA update at the end of the guide. They can also be removed/disabled.
Rooting (Credit: DroidFreak32)
To root the phone we will be installing Magisk, using a patched boot.img from your current version of HydrogenOS. In this case, we are using version 11.0.1.2 (the version of the MSM Download Tool). I will be providing the boot.img from my phone, which I have used personally.
You will want to download the following:
Patched 11.0.1.2 Boot.img (Download)
Canary Magisk Manager (Download)
Preparation:
Re-enable developer mode, as well as USB debugging. Just like you did in the previous section.
Transfer the app-debug.apk to your phone, and install it through the phone's file manager.
Copy "magisk_patched_11.0.1.2.img" to your computer's ADB directory.
Rooting:
Run the following:
adb reboot bootloader
Your phone will reboot into the bootloader.
Run the following:
fastboot boot magisk_patched_11.0.1.2.img
Your phone will reboot, using the patched boot.img.
Enter the Magisk Manager app you installed earlier.
Tap Magisk (Install) -> Perform Direct Install
You will have root on reboot!
If Magisk says it needs to reboot to apply changes, you will need to follow the last set of steps again.
If for some reason the boot.img I provided doesn't work, you will need to follow DroidFreak32's guide. His guide is very detailed and will instruct you on how to create your own patched boot.img and root the phone.
Installing Google Apps (Credit: Steve0007)
To install Google Apps, we will be using WeebGapps (Magisk Module). There is no custom recovery available, so this is the best way to sideload Google Apps currently.
You will want to download the zip from this link:
https://t.me/s/WeebGAppsChannel?q=#Android_11+#magisk_mode (Requires Telegram)
After downloading the zip:
Transfer the zip you have downloaded to your phone's storage.
Open Magisk Manager
Select the Modules icon (looks like a puzzle piece)
Select "Install from storage"
Install the module's zip file
Your phone will reboot, with Google Apps
If you receive version errors when installing the module, download an older version. Version 4.0.4 worked perfect for me.
Updating
Unlike on OxygenOS, you will actually be able to download and perform OTA updates, through the Settings app. If you do not follow the steps below when updating, you will lose root.
Disable your Magisk module when updating, and re-enable after you have successfully updated!
I also recommend disabling "automatic system updates" via Settings, as they can break your root.
Follow these steps:
If you are missing the Play Store after updating, install it from here. If you happen to mess up or lose Google Apps, try uninstalling/reinstalling the module.
If you do happen to lose root, you will want to follow DroidFreak32's guide, as I've only provided the patched boot.img for 11.0.1.2.
Bloatware
You're probably annoyed by all the preinstalled garbage. I've made a short script that disables the Chinese market and removes all 3rd party Chinese applications.
Disabling Market and Removing 3rd Party Apps:
Visit here: https://pastebin.com/raw/3SsA1tpc
Open notepad and save the above text as a .bat file.
Copy and run the file from your ADB directory.
You will likely need to run this script each update, as applications are added back on update. I've decided to leave the other applications on my device for now. If you want to remove even more, Steve0007 recommended this resource.
Credits
Steve0007 for working with me to find the solid solution for Google Apps.
WeebGApps for the module that installs Google Apps.
DroidFreak32 for his thread on rooting the Oneplus 8T.
Some_Random_Username and g96818 for uploading/sharing the MSM download tools.
Most of this information is compiled from other sources, so consider supporting the developers listed above.
Click to expand...
Click to collapse
Hello.
Thinking to experience the Hydrogen and using all related Google Apps at the same time but the file downloaded was in 7z format. Thought it is in zip format. How am I going to extract then?
Salam.Husin said:
Thinking to experience the Hydrogen and using all related Google Apps at the same time but the file downloaded was in 7z format. Thought it is in zip format. How am I going to extract then?
Click to expand...
Click to collapse
You'll need WinRAR or another program to extract the archive. Apologies for the confusion.
OniAraAra said:
You'll need WinRAR or another program to extract the archive. Apologies for the confusion.
Click to expand...
Click to collapse
Got it.
To be frank, how is it going? I mean with hydrogen os and having google apps workable at the same time?
Salam.Husin said:
Got it.
To be frank, how is it going? I mean with hydrogen os and having google apps workable at the same time?
Click to expand...
Click to collapse
After eliminating the bloatware, it's actually very nice. Asides from minor issues with the Play store vanishing, it should serve everyone's needs perfectly.
That said, I do encourage people abstain from installing the Google Apps if they are uncomfortable reinstalling the APK when or if it vanishes. We're finding a fix for this.
OniAraAra said:
After eliminating the bloatware, it's actually very nice. Asides from minor issues with the Play store vanishing, it should serve everyone's needs perfectly.
That said, I do encourage people abstain from installing the Google Apps if they are uncomfortable reinstalling the APK when or if it vanishes. We're finding a fix for this.
Click to expand...
Click to collapse
You mean, Google Play Store and/or Google Play Services, to be specific? It keeps vanishing even after all means taken into consideration?
Right now, I have already got the msm tool for hydrogen. Thinking about to go through it or not... hmmm...

[HOW TO] Pass SafetyNet and be Play Protect Certified on any Custom ROM

Hi everyone !!
I recently made a video tutorial on how to pass safetynet and be play protect certified on any custom ROM. For the video, I used my Samsung Galaxy S20 (SM-G980F) as an example. It is currently running the Pixel Experience Plus GSI ROM. If you have any questions or need help with the process please let me know and I'll be happy to guide you !! Also, let me know what other guides you want me to post and I'll make the videos for you !!
YouTube Step by Step Tutorial
Pre-Requisites
Have root access on your custom ROM
Steps to Pass SafetyNet and be Play Protect Certified on any Custom ROM
1. Open your browser and search for "Magisk Hide Props Config Download"
2. Look for the XDA post and scroll down until you see the zip module attachment
3. Download the attachment to your phone's internal storage
3. Go back to google and search for "Universal SafetyNet Fix"
4. Look for the GitHub page (the first link) and scroll down to the "Download" section
5. Click on the download link and scroll down until you find the zip module attachment
6. Download the attachment to your phone's internal storage
7. Open Magisk and click on the gear icon (settings)
8. Scroll down and enable "Zygisk" and "Enforce Deny List"
9. Click on the "Configure Deny List Options"
10. Click on the three dots at the top and select "Show system apps"
11. Search and select all the apps that are giving you trouble with SafetyNet (Netflix, Banking Apps, Play Store, GooglePlay Services etc.)
12. Go back to the Magisk homepage and go to the "Modules" tab
13. Click on the "Install From Storage" button
14. Select the file you downloaded from the XDA forum
15. Wait for the module to install
16. Go back and click on the "Install From Storage" button again
17. Select the file you downloaded from GitHub
18. Wait for the module to install
19. Click on the blue "Reboot" button at the bottom to restart your phone
20. After your phone restarts, run a SafetyNet test. Your status should now be PASSED.
21. Open Magisk again and click on the gear icon at the top (settings)
22. Scroll down and click on "Configure Deny List"
23. Click on the three dots at the top and select "Show system apps"
24. Search and select the "Google Play Services" app
25. Go to your phone's settings and look for the "Apps" section
26. Click on "See all apps"
27. Click on the search icon and look for "Google Play Store"
28. Select "Storage & Cache"
29. Tap on "Clear storage"
30. Go back to "All apps"
31. Click on the search icon and look for "Google Play Services"
32. Select "Storage & Cache"
33. Click on "Manage Space"
34. Tap on "Clear all data"
35. Open the Google Play Store
36. Click on your profile picture in the upper right hand corner
37. Tap on "Settings"
38. Click on "About"
39. Look for "Play Protect Certification"
40. Under that you should see a message saying "Device is certified"
ENJOY !!!
I havent managed to install a GSI on the same device. Maybe you can help me?
got that working on my raspberry pi 4, thanks
Not working anymore on S20 Ultra.
See here: linky
I wanted to use Disney+, Netflix and Amazon Prime on my Redmi Note 8T with Magisk 25.2.
Your guide made all Apps except Netflix appear on the Playstore and work.
Thank you for that!
Does anyone know why Netflix won't be shown in Appstore on the phone? On my PC i see "you do not have a compatible device", whereas the others can be remote installed without problems.
I see "Playstore certified", i tried some Safetynet checkers and all say "Basic integrity pass, CTS pass", and i even tried some DRM Info apps to check my Widevine level, which is marked as L1 (the best).
And yeah, i deleted playstore data (repeatedly), rebooted the device (repeatedly) and blocked the app(s) directly after installation in Zygisk.
I follow all the instructions without seeing this post, and I was not able to make it work.
But your video also covers the fix for my problem...
CLEARING THE CACHE AND STORAGE DATA made it work!!!
you rock!!!
Tried these instructions on the LineageOS 20.0 build for Samsung Galaxy Tab S3 (rom is here: https://forum.xda-developers.com/t/...1-2-lineageos-20-0-for-galaxy-tab-s3.4510785/).
After following all the instructions, the play store is still coming up as "Device is not certified".
Thinking this might be because the ROM is an Android 13 ROM and I notice that some of the Magisk modules referenced are only certified up to Android 12.
Hi all,
I checked on the Play Store it says "device certified" also several Safetynet checkers say the same ("passed").
The only thing that I can not use is my banking app.
My phone Sagit using lineage-20.0-20230119-nightly-sagit-signed.zip and twrp-3.7.0_9-0-sagit.img
twrp-3.7.0_9-0-sagit.img
lineage-20.0-20230119-nightly-sagit-signed.zip
Why is saying ("passed") that I can't use my banking app?
P.S.: I don't install any Magisk or SafetyFix.
Thank you
Maybe your Banking app detects your open Bootloader or the ROM misses some keys or something.
I have Magisk installed on my debloated stock ROM and use the provided feature to hide it from those apps, works like a charm.
Banking app worked fine, got an update and suddenly "This device is unsafe, contact support". Deleted App data, hid Magisk, rebooted, worked again (and does still).
Thanks, it works on my samsung s4
It worked for me on S20 ultra.
Thanks a lot!

[GUIDE] Google Play Store on rooted Fire TV (Systemless / microG)

The instructions below reflect the process I followed to install the Google Play Store on my Fire TV Stick 3 (sheldonp) which I have been using for a month now. To be clear, I am not responsible for anything that happens to your device as a result of following this guide.
If you already have knowledge of the process, then it is simply setting up microG Istaller Revived with the Android TV Google Play Store.
If you are new to this, then the entire process is explained below. It is assumed that the Fire TV is already rooted and has Magisk installed.
Download the following and transfer the files to the Fire TV using adb, file transfer apps or a file manager with LAN/Cloud access.
LSPosed
FakeGApps
Google Play Store (Android TV)
microG Installer Revived
LSPosed is available in two variants as of now, but the Zygisk one is considered to be the way forward. So, in case you are using the Zygisk release, then you need to enable Zygisk from Magisk settings as well.
Go to the Modules section of Magisk and select ‘Install from storage’, following which, choose the LSPosed zip. This step was tricky for me because it opens the DocumentsUI for selection, which doesn’t quite work with the remote. I used a wired mouse with OTG, but that too was quite wonky. Eventually, I managed to enable ‘Show internal storage’ from the right-hand menu and then internal storage from the left-hand menu. The good news is that once you select a folder and module, then the same folder always remains open in DocumentsUI, making future module installations easier. Reboot as required.
It is most likely that you will not see the LSPosed app on your homescreen, so navigate to /data/adb/lspd using a root file manager or adb and install the manager.apk file present in that folder to get the LSPosed app on the homescreen.
Install the FakeGapps apk and enable the module from within the LSPosed app.
Rename the Android TV Play Store downloaded earlier to Phonesky.apk and copy it to /data/adb using a root file manager or adb.
Install the microg Installer Revived module from within Magisk and reboot when prompted.
After reboot, you should see the Google Play Store icon in your app drawer. Open it, choose sign-in, after which it will redirect you to the Google web login process through microG.
That’s it! You should now have a fully functional Play Store on the Fire TV.
Bonus: Some specific apps from the Play Store fail to invoke the Amazon keyboard for input fields. In that case, you can download a keyboard from the Play Store and make it the default one. I did so for Gboard installed from the Play Store and the command to do so was as follows:
Code:
ime list
ime enable com.google.android.inputmethod.latin/com.android.inputmethod.latin.LatinIME
ime set com.google.android.inputmethod.latin/com.android.inputmethod.latin.LatinIME
Hello!
I don't see the Play Store app in the drawer even after placing the Phonesky.apk at /data/adb. I only see the Microg Revived app that I installed via Magisk
supermutant2299 said:
Hello!
I don't see the Play Store app in the drawer even after placing the Phonesky.apk at /data/adb. I only see the Microg Revived app that I installed via Magisk
Click to expand...
Click to collapse
If during the microG Installer Revived installation you see "Installing real Play Store", then it means the store was installed properly.
I have been using the FireTV Leanback Launcher since day 1 since I absolutely hate the KFTV launcher interface which also happens to not display all sideloaded apps. Not sure if you are using the default launcher then.
Thank you for the procedure, I can now use application which needs google services.
But I can't use google play store because I can't log in. Every time I enter my login, I become back to begening of login procedure. Is there is something I should do ? Thanks
xtof05 said:
Thank you for the procedure, I can now use application which needs google services.
But I can't use google play store because I can't log in. Every time I enter my login, I become back to begening of login procedure. Is there is something I should do ? Thanks
Click to expand...
Click to collapse
I ran into the same problem. Every time I entered my email address microG's Login Activity would crash. What fixed this for me was downgrading to an older version of microG. Now I'm using the version packaged with microG Installer Revived v2.4.0, and have had no issues logging in. If you're using v20.4 Magisk Manager then this the version available to download straight from the app.

Categories

Resources