Related
*EDIT 05-24
I had a problem where I would get stuck even after using MSMDOWNLOADTOOL completely. With the help of great minds,
#fullofhell #Dark Nightmare #Scott and frankly a god #Eliminater74 I could fix the phone completely. I am heading for modem work, which put me into this situation.
As of this point, I cannot find any misbehavior but I am quite new to this, so I can be deadly wrong. (Well but then, sensors are fine, calls , texts, data, wifi is working just fine. I don't know what else to check!)
I know as a fact that what happened to me is not really that rare (although it is quite rare, it happened before as well.)
So I was about to share how I fixed it but decided not because what I did was so out of experimental and I frankly have no idea if the same would work for others.
Tbh, if you are in the same position as I am, go ahead and contact the Oneplus service team. I did what I did only because I had to, I am Korean, and couldn't get it fixed.
If anyone, comes to this point and has absolutely no way to get it fixed, I will be glad to help,
(only if that person agrees that there is more chance to totally destroy it then fixing it XD.)
Again, Thank you so much Scott, dark nightmare. What you guys shared with me saved a bunch of time and you guys are what the forum truely needs!
P.S, Still couldn't find the moded MSMdownload tool. What can you recall what functions it had? Maybe enabled engineer mode?
I can't assist with your dump file, I'm just curious though how exactly did you brick your device?
Pain-N-Panic said:
I can't assist with your dump file, I'm just curious though how exactly did you brick your device?
Click to expand...
Click to collapse
Although it's pure stupidity, I guess it's worth sharing. I was messing around with the modem and somehow somewhere I broke proximity sensor.
So, I used fastboot flash tools including critical partitions. Which is the same process shared by amt911 "https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145". Once I was done with flashing, I could not reboot. Here, I could have just side load or try to find other way out but I decided to use msm tool, which locked my oem.
basically, I think it's critical partition that causes un-recoverable boot-loop to some of us. That is not fixed by msmdownloadtool for now.
Which, I am curious, do you think msm-download tool will wipe and flash every partitions? From what I searched so far, everyone seems to agree that msm tool will flash every partitions including the critical parts (which is not exactly true because I know for a fact it doesn't wipe out efs partition). If not, do you think there is a way to force it?
Thank you for your interest though! I am going quite sad and mad alone here!
Somehowko said:
Although it's pure stupidity, I guess it's worth sharing. I was messing around with the modem and somehow somewhere I broke proximity sensor.
So, I used fastboot flash tools including critical partitions. Which is the same process shared by amt911 "https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145". Once I was done with flashing, I could not reboot. Here, I could have just side load or try to find other way out but I decided to use msm tool, which locked my oem.
basically, I think it's critical partition that causes un-recoverable boot-loop to some of us. That is not fixed by msmdownloadtool for now.
Which, I am curious, do you think msm-download tool will wipe and flash every partitions? From what I searched so far, everyone seems to agree that msm tool will flash every partitions including the critical parts (which is not exactly true because I know for a fact it doesn't wipe out efs partition). If not, do you think there is a way to force it?
Thank you for your interest though! I am going quite sad and mad alone here!
Click to expand...
Click to collapse
Damn man, sorry to hear that. I've never had to mess with msm tool, thankfully. The fact that it locks the bootloader kind of scares me. From what I've read about the tool it does sound like it wipes/flashes all partitions including critical.
Are you able to unlock the BL in fastboot mode using the command?
Pain-N-Panic said:
Damn man, sorry to hear that. I've never had to mess with msm tool, thankfully. The fact that it locks the bootloader kind of scares me. From what I've read about the tool it does sound like it wipes/flashes all partitions including critical.
Are you able to unlock the BL in fastboot mode using the command?
Click to expand...
Click to collapse
As the bootloader is locked and I cannot boot, I am can't put enable oem-unlock on the data. Which means, yes I cannot unlock the bootloader as long as oneplus 6t doesn't have a loophole like oneplus 3T. I am pretty sure that was fixed though.
Well, I don't know if it's msm tool really. If I just started with that I would have been fine (at least I believe so). Yes I didn't wanted to lock the boot loader, which is why I used fastboot flash tool. But then, that's why I ended up here. So, if you end up in a situation where you might, might need msm tool or flash tool, always go with the msm tool !
For msm, I am quite certain it doesn't flash all partitions. I think there is some partition checkup somewhere. Here is why I think so
1) Completely formatted OS cannot be on a boot loop unless it's caused by hardware issue.
2) All partitions except vendor, system goes way too fast. It ends within 200 seconds for me. I would assume that kinda makes sense as it really is the problem of usb-pc hardware power but installing the image should take longer I think (but then I truly have no idea)
My conclusion is that the tool checks partition size before flashing, and does not touch / replace every file. I am probably wrong since it is
EDI tool after all, but I simply cannot believe msm tool cannot fix something that has nothing to do with the hardware.
I mean, imagine we can brake our newly formatted PC OS without any single components corrupted! (Is it even possible?)
I don't know man....with the bootloader locked you're not able to fastboot flash ANYTHING?
Somehowko said:
For msm, I am quite certain it doesn't flash all partitions.
Click to expand...
Click to collapse
Im sure this is correct. This is about the 3rd or so thread that I have read whereas the MSM tool could not completely recover the phone.
So far no one has found a solution. One person ended up sending theres back to OnePlus so we are waiting to find out how it turned out. Here is the thread I am referencing: https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145
Scott said:
Im sure this is correct. This is about the 3rd or so thread that I have read whereas the MSM tool could not completely recover the phone.
So far no one has found a solution. One person ended up sending theres back to OnePlus so we are waiting to find out how it turned out. Here is the thread I am referencing: https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145
Click to expand...
Click to collapse
Well, tbh, we know as a matter of fact it is not a complete flashing. I mean it clearly says flashing to partition _a only unlike previous versions of msm tools (ah, good days.) What I am curious of is if there is anything we can do about skipping partitions. I am suspecting using qfil would, through unpacking ops files. Although it seems like a long shot.
Btw, thank you for your interest!
Scott said:
Im sure this is correct. This is about the 3rd or so thread that I have read whereas the MSM tool could not completely recover the phone.
So far no one has found a solution. One person ended up sending theres back to OnePlus so we are waiting to find out how it turned out. Here is the thread I am referencing: https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145
Click to expand...
Click to collapse
Msm tool has hidden functions, it's a pain but not impossible.
Search Google and gsm forums for readback mode, smt wipe, and imei/esn restore...
Siren siren... Watch out the xda police gunna blow down and remove my comment.. oh nooooo aghastt....
Btw u cannot use berklers script without an AES recovery key. There aren't any around as far as I know for fajita.
Easiest thing is if OnePlus bought device, get an exchange.. play dumb.. oops I dunno, your Android Q crap broke it..
Or if tmo bought, add insurance if u don't have it, play dumb. Get a new one. I did for a scratched screen..but made it about the modem not working, bc I erased it...
These corporations owe us nothing.
Get a new phone man
fullofhell said:
Msm tool has hidden functions, it's a pain but not impossible.
Search Google and gsm forums for readback mode, smt wipe, and imei/esn restore...
Get a new phone man
Click to expand...
Click to collapse
Thank you so much! I don't have to hassle with python anymore!!! That thing was making my brain fart!
Sadly, That's the only option that I got. As I am living in Korea and I cannot send a phone outside of a country (funny isn't it? they say battery hazard, I say licking Samsung's ass) I can't even get it fixed.
Frankly, I love my phone and I would go an extra mile even for a hint of getting it back to work again.
I will try to look for back up and smt wipe. Hopefully, I wouldn't totally destroy my phone. (again, hopefully.)
If you have any other information, please share with me!
Somehowko said:
Thank you so much! I don't have to hassle with python anymore!!! That thing was making my brain fart!
Sadly, That's the only option that I got. As I am living in Korea and I cannot send a phone outside of a country (funny isn't it? they say battery hazard, I say licking Samsung's ass) I can't even get it fixed.
Frankly, I love my phone and I would go an extra mile even for a hint of getting it back to work again.
I will try to look for back up and smt wipe. Hopefully, I wouldn't totally destroy my phone. (again, hopefully.)
If you have any other information, please share with me!
Click to expand...
Click to collapse
You're saying an msm reload didn't fix the device? Btw you can use the unlocked device msm tool as well as of version 9.0.11 I believe, just look for the modded tool that skips the model check, did you do a full system backup before tinkering? If so you can dd files back into place if msm doesn't overwrite them the way its supposed to, I've done some crazy things to the 6t, a bit surprised recovery didn't fix it for you...
And yeah FoH already pointed out that decrypt tool is useless to us.
Dark Nightmare said:
You're saying an msm reload didn't fix the device? Btw you can use the unlocked device msm tool as well as of version 9.0.11 I .
Click to expand...
Click to collapse
Are you talking about what
PHP:
Eliminater74
shared with us? if so, I tried to use back up before smt download but it fails. firehorse read data error 995.
And I didn't do the back up; I only flashed every partition with the fastboot-flash tool. I am quite surprised to see msm letting me down as well );
Can you share more if you know more?
Somehowko said:
Are you talking about what
PHP:
Eliminater74
shared with us? if so, I tried to use back up before smt download but it fails. firehorse read data error 995.
And I didn't do the back up; I only flashed every partition with the fastboot-flash tool. I am quite surprised to see msm letting me down as well );
Can you share more if you know more?
Click to expand...
Click to collapse
Na, there was another someone else had modded, it should be in the general forum, I believe it was linked in the new international conversion method, the one after my thread. If you simply flashed using the fastboot-flash-tool, then you should definitely be recoverable, attempt a msm reload, I believe you may have a usb port issue if you're having firehose failures, try using an onboard port and not the front ports.
Dark Nightmare said:
Na, there was another someone else had modded, it should be in the general forum, I believe it was linked in the new international conversion method, the one after my thread. If you simply flashed using the fastboot-flash-tool, then you should definitely be recoverable, attempt a msm reload, I believe you may have a usb port issue if you're having firehose failures, try using an onboard port and not the front ports.
Click to expand...
Click to collapse
That's weird. If I had a usb port issue it would say it during the msmdownloading wouldn't it? Msmdownload goes fine but I just can't use the readback function.
And thank you I will go and look for it!
Somehowko said:
That's weird. If I had a usb port issue it would say it during the msmdownloading wouldn't it? Msmdownload goes fine but I just can't use the readback function.
And thank you I will go and look for it!
Click to expand...
Click to collapse
qusb is weird, it would let me backup but not flash once, tried a different port and it worked fine for both, so I figured I'd suggest such, doesn't hurt to try after all?
Dark Nightmare said:
qusb is weird, it would let me backup but not flash once, tried a different port and it worked fine for both, so I figured I'd suggest such, doesn't hurt to try after all?
Click to expand...
Click to collapse
Weird, different port different errors. Error code changed. I will try with other desktops this afternoon.
For another msmdownload tool, are you referring to the thread "T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)"?
Thank you so much for your help!
Somehowko said:
Weird, different port different errors. Error code changed. I will try with other desktops this afternoon.
For another msmdownload tool, are you referring to the thread "T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)"?
Thank you so much for your help!
Click to expand...
Click to collapse
That's correct and if you're on windows 10 it may be a system update messing with the drivers, its dumb, but it actually affects the simplest of things.
Somehowko said:
Weird, different port different errors. Error code changed. I will try with other desktops this afternoon.
For another msmdownload tool, are you referring to the thread "T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)"?
Thank you so much for your help!
Click to expand...
Click to collapse
As crazy as it sounds three reboots and four different ports did the trcik!
And sincerely thank you! Although I couldn't find the modded msmtool you told me I was able to boot into the os finally.
I'm not seeming to find coherent instructions to get back to stock 11.0.2.2IN11AA
I have the 8 Pro, rooted, newest magisk and I installed a magisk module that is now causing System UI crash at startup. I have tried a couple things: 1) tried the "adb wait-for-device shell magisk --remove-modules" --> nothing happens when starting back up except System UI error. 2) I've flashed back to stock boot.img (hoping to get to safe mode to disable magisk)...all I get is System UI error again.
So...what I want to do is start all over and end up with 11.0.2.2IN11AA rooted. Once I'm back to "factory" I'm pretty sure I can get back to magisk and root.
Can anyone help me with some decent instructions please?
Thanks
I can. So last week I managed go back from a rooted situation to stock rom with LOCKED bootloader. This means that you're phone will be as you bought it and you're gonna lose everything of course.
This video on YT helped me.
***REMEMBER TO CHOOSE YOUR FIRMWARE BECAUSE I THINK THIS VIDEO IS FOR ASIA, IF IT IS THE SAME FOR YOU THEN YOU SHOULD FOLLOW THIS VIDEO***
I provide you a link with a thread on xda where I found the version for my oneplus 8 pro (EU)
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS | XDA Developers Forums (xda-developers.com)
Thanks I'll check it out and report back
glhelinski said:
Thanks I'll check it out and report back
Click to expand...
Click to collapse
Let me know
glhelinski said:
I'm not seeming to find coherent instructions to get back to stock 11.0.2.2IN11AA
I have the 8 Pro, rooted, newest magisk and I installed a magisk module that is now causing System UI crash at startup. I have tried a couple things: 1) tried the "adb wait-for-device shell magisk --remove-modules" --> nothing happens when starting back up except System UI error. 2) I've flashed back to stock boot.img (hoping to get to safe mode to disable magisk)...all I get is System UI error again.
So...what I want to do is start all over and end up with 11.0.2.2IN11AA rooted. Once I'm back to "factory" I'm pretty sure I can get back to magisk and root.
Can anyone help me with some decent instructions please?
Thanks
Click to expand...
Click to collapse
Visit the MSM thread, that's it
Sneakdovi said:
Let me know
Click to expand...
Click to collapse
Good site and instructions. They sure don't make it clear that msmtool is packaged inside the image download file
glhelinski said:
Good site and instructions. They sure don't make it clear that msmtool is packaged inside the image download file
Click to expand...
Click to collapse
I only donwloaded the EU verision (because i'm in Italy), went to qualcom recovery, and started the process
Sneakdovi said:
I only donwloaded the EU verision (because i'm in Italy), went to qualcom recovery, and started the process
Click to expand...
Click to collapse
Please help me, i'm bricked my new device. I want that ****** monocrome filter and make to many bull**** ! :-( I need my phone.
The MSM-Tool is give me always "Sahara" errors. Make the same misstake then you! I locked the bootloader!
Please.
chr_rocke808 said:
Please help me, i'm bricked my new device. I want that ****** monocrome filter and make to many bull**** ! :-( I need my phone.
The MSM-Tool is give me always "Sahara" errors. Make the same misstake then you! I locked the bootloader!
Please.
Click to expand...
Click to collapse
First off, you may want to edit your language in here, no need to swear. Secondly you should check out the thread regarding the MSM tool.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Post #2 above has a video and also links to the same place that freshlybaked420 referenced... Should be enough to get you back on track
FreshlyBaked 420 said:
First off, you may want to edit your language in here, no need to swear. Secondly you should check out the thread regarding the MSM tool.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes, it's all true. Sorry for that i have now working for many days on this. Not sleeping enought. One more question that could bring me a step foward...
I was on IN11.0.2.2 before i locked the bootloader and bricked the device.
Now i downladed the Decrypted OxygenOS 11.0.0 IN21BA Version. I have now the error: Param Preload Device not match image. Question: Must i habe the Decrypted OxygenOS 11.0..2.2 IN21BA Version that it goes to work?
I can't the use the link for the right version, it is password protected.!
Thanks
The password is listed in the OP
glhelinski said:
The password is listed in the OP
Click to expand...
Click to collapse
Thank you, but I didn't find it.
One point I have forgotten to tell. Before the hard brick happened, I used Magistik and Patch a new boot.img then I flashed this with fastboot command. My failure was to make this 2. times. with different patches. The horrible thing is now that I must delete these files on my Laptop to get more space. When this the Problem of the MSMTOOL error is I had not really a chance to unbrick my device. Have anyone Downgrade with MSMTOOL the Stock Rom?
Thx for your help. I download now from OP the latest ROM. I will try it. I feel really scared. Maybe my device is not unbricked anymore.
The other Tool that I have (last chance) is the original Qualcomm flashing Tool QPST.
described here:
Download QPST Flash Tool & How to Use it to Flash Firmware on Qualcomm Android Devices
Download all versions of QPST Flash tool and learn how to use the QFIL and Software Download programs to flash firmware files on Qualcomm Android devices.
www.thecustomdroid.com
-- > But I found nothing here, that this tool was used. There is no special Rom here to found.
chr_rocke808 said:
Thank, but i didn't find it.
One point i forgotten to tell. Before the hard brick happend, i used Magistik and Patch a new boot.img then i flashed this with fastboot comand. My failure was to make this 2. times. with diffred pachtes. The horrible thing is now that i must delete this files on my Laptop to get more space. When this the Problem of the MSMTOOL error is i had not realy a chance to unbrick my device. Habe anyone Donwgrade with MSMTOOL the Stock Rom?
Thx for your help. I download now from OP the latest ROM. I will try. i feel realy scared. Mabye my device is not unbricked anymore.
The other Tool that i have (last chance) is the orginal Qulacomm flashing Tool QPST.
described here:
Download QPST Flash Tool & How to Use it to Flash Firmware on Qualcomm Android Devices
Download all versions of QPST Flash tool and learn how to use the QFIL and Software Download programs to flash firmware files on Qualcomm Android devices.
www.thecustomdroid.com
-- > But i found nothing here, that this tool was used. There is noch spezial Rom here to found.
Click to expand...
Click to collapse
None of that matters.
1st identify your device!
What region is it?
If you have BA then don't flash AA you'll mess things up.
2nd visit the MSM thread!
Download the tool 'for your device!'
3rd boot to EDL (I responded to you in the romaur thread how to do this)
4th as soon as it's connected to your pc in edl, flash the device
5th MSM will relock your bootloader.
6th don't do something if you're not sure, just ask.
Oh and lol chill on the swearing also on posting everywhere, just make 1 thread and stick with it, people will help
Hey, my Phone is working like a charm. Thx for the great work !!!. I'm so happy !!!
It is better to come here to real developers, I had to get bad download links and bad Software! This was the only problem. For many years I have the first Samsung Galaxy and I'm knowing that I can get all the problems for not booting devices back. But I was scared that many Devices like Huwai bring their bootloaders with cryptographic methods in a safe trunk.
Best wishes to you, and the people that I'm working for the android project!
regardless,
chr_rocke808
chr_rocke808 said:
Hey, my Phone is working like a charm. Thx for the great work !!!. I'm so happy !!!
It is better to come here to real developers, I had to get bad download links and bad Software! This was the only problem. For many years I have the first Samsung Galaxy and I'm knowing that I can get all the problems for not booting devices back. But I was scared that many Devices like Huwai bring their bootloaders with cryptographic methods in a safe trunk.
Best wishes to you, and the people that I'm working for the android project!
regardless,
chr_rocke808
Click to expand...
Click to collapse
Lol no worries pal, but trust me, always make a thread unless one exists, it'll work out.
Glad you're sorted.
When I try to enable wifi (or bluetooth), it says 'Turning on...' underneath the icon but the process never succeeds.
Note:
-Under About > Status I see no MAC address for Wifi or Bluetooth.
-Phone is not rooted.
-Bootloader is unlocked.
-No custom recovery.
-Airplane mode is off.
-I am able to access the internet when I put in my SIM card and use my cellular data.
-EDIT: Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
-EDIT: I keep my SIM out of this phone (it's in my fully working phone). Can insert if need be.
My attempts to solve this issue (none have worked):
-I updated to OxygenOS 11.
-I booted into recovery and wiped everything, including cache. I also did a System Reset.
-I went to Settings > System > Reset Wifi, mobile and Bluetooth. I also did Erase all data (factory reset) in the same place.
Is there anything else left to try? Is there a way to flash the modem image maybe, I remember having to do that with my Nexus 4 many years ago.
Thanks!
A factory reset never finds the root cause. A virus or an old load are the only reasons to use it otherwise find the root cause. Usually a bad setting. If it's software caused the solution is right in front of you.
Network reset, worth a shot.
Clear system cache, can't hurt.
Clear data in sim card tool kit apk.
Both are probably redundant since you already did a hard reset, but try anyway.
Otherwise...
Bad sim card (try reseating it or replace otherwise) , corrupted firmware, or defective hardware.
Which phone do you have? I've seen this when a user has had a Chinese version and converted to global then when they updated to 11 it all went wrong.
If you're not using a converted Chinese phone then it could very well be your boot image. Extract it using payload then flash it.
If not that then MSM restore your current firmware.
dladz said:
Which phone do you have? I've seen this when a user has had a Chinese version and converted to global then when they updated to 11 it all went wrong.
If you're not using a converted Chinese phone then it could very well be your boot image. Extract it using payload then flash it.
If not that then MSM restore your current firmware.
Click to expand...
Click to collapse
Sorry, what is **MSM** restore?
Under About phone the Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
So I extracted all the images(?) using payload and very foolishly decided to
Code:
fastboot flash modem modem.img
The phone doesn't boot up anymore/remains stuck in loading phase (spinner...). I did a
Code:
fastboot flash boot boot.img
+ wipe + factory reset but still stuck in loading phase.
Any ideas as to how I can fix my mistake?
I appreciate all your help guys.
bassamanator said:
Sorry, what is **MSM** restore?
Under About phone the Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
So I extracted all the images(?) using payload and very foolishly decided to
Code:
fastboot flash modem modem.img
The phone doesn't boot up anymore/remains stuck in loading phase (spinner...). I did a
Code:
fastboot flash boot boot.img
+ wipe + factory reset but still stuck in loading phase.
Any ideas as to how I can fix my mistake?
I appreciate all your help guys.
Click to expand...
Click to collapse
Ah yea that's not good. 2025 AFAIK is global mainly sold in the US.
The MSM tool is in discussion I believe and it's a tool you use to restore your phone using EDL mode, to get to EDL.
Power off your phone.
Connect it to your computer (if it turns on again turn it back off)
Then open up the MSM tool and press and hold volume up and down
Your computer will recognise the the device and at this point you should start the process as it will try again to reboot shortly after without any input from you.
This is the thread you need.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Bare in mind this will relock your bootloader but it's easy to get that back unlocked.
Any questions regarding the tool just ask in the thread.
(you shouldn't need to providing you download the right one)
Download the latest firmware within the tool. If you get stuck don't just guess, ask someone.
@dladz
So I've managed to unbrick the phone using that tool. Thanks.
I'm going to install the latest oxygenos again, extract the boot.img from that zip, and flash it again as per your recommendation.
So I flashed OnePlus8ProOxygen_15.O.32_OTA_0320. No wifi. I extracted the boot.img and then flashed it via fastboot. Still no wifi.
Anything else that I can try?
I guess this is a hardware problem?
bassamanator said:
So I flashed OnePlus8ProOxygen_15.O.32_OTA_0320. No wifi. I extracted the boot.img and then flashed it via fastboot. Still no wifi.
Anything else that I can try?
I guess this is a hardware problem?
Click to expand...
Click to collapse
But now you have bt?
blackhawk said:
But now you have bt?
Click to expand...
Click to collapse
No bluetooth either. Same exact issue as with the Wifi, it says Turning on... then it doesn't.
bassamanator said:
No bluetooth either. Same exact issue as with the Wifi, it says Turning on... then it doesn't.
Click to expand...
Click to collapse
How/when did it start? Anything happen to the phone?
bassamanator said:
@dladz
So I've managed to unbrick the phone using that tool. Thanks.
I'm going to install the latest oxygenos again, extract the boot.img from that zip, and flash it again as per your recommendation.
Click to expand...
Click to collapse
So if you've used that tool then it'll have relocked your bootloader.
Did you unlock it again? AFAIK you can't flash another boot image unless you unlock it again.
The only other thing i can recommend (if you really don't want to RMA)
Would be to downgrade to 10 but in all fairness that really shouldn't even be an option at this point, you've flashed a clean OS back as oxygen would have, you've updated via the official OTA route.
No I think it's time to contact OnePlus for an RMA.
Unless someone else had seen this issue personally I haven't.
Had you rooted in the past btw? Flashed many magisk modules??
I find it highly unlikely that they could survive this but you could potentially try the magisk removal command, can never remember it it's in my payload dumper guide.
If no one else chimes in I'd say it's an RMA, I've not seen it before, it's strange.
Also (and please don't put it on here) but is your IMEI missing too?
This could be your EFS partition if so.
Edit: found this super old thread for the OnePlus one, same issue.
I think this is fixable, potentially remotely from OnePlus and or anyone else who has access to the updated tool, might be worth mentioning in the MSM thread if you haven't already.
PS: don't follow the guide in the link btw it's for the 1+1 lol, in just putting it here as a reference
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
blackhawk said:
How/when did it start? Anything happen to the phone?
Click to expand...
Click to collapse
I got the phone used right before Christmas. It still had the protective plastic on it until I removed it today. It really is in mint condition (or looks to be). I've been away and finally got around to moving things over from my old oneplus 3T.
It's certainly possible that I bought a lemon but at this point I'd like to just fix it if I can.
bassamanator said:
I got the phone used right before Christmas. It still had the protective plastic on it until I removed it today. It really is in mint condition (or looks to be). I've been away and finally got around to moving things over from my old oneplus 3T.
It's certainly possible that I bought a lemon but at this point I'd like to just fix it if I can.
Click to expand...
Click to collapse
I think it's fixable now I really do
From what I've been reading I think it's a mixture of partitions that have been borked z namely the EFS and potentially the persist.img partition if the same position structure exists that did back in the day.
With that in mind are you able to use your fingerprint? I only ask as persist is linked to it so if that's not working then we may have a correlation between problems.
If it is then it's a ? Over the theory.
I'll keep reading but from what I can gather it seems that EFS and persist at least were linked, can't be sure if they are this point.
Have a look at that link I sent see if anything raises a flag for you, bare in mind it's for an older device
dladz said:
So if you've used that tool then it'll have relocked your bootloader.
Did you unlock it again? AFAIK you can't flash another boot image unless you unlock it again.
The only other thing i can recommend (if you really don't want to RMA)
Would be to downgrade to 10 but in all fairness that really shouldn't even be an option at this point, you've flashed a clean OS back as oxygen would have, you've updated via the official OTA route.
No I think it's time to contact OnePlus for an RMA.
Unless someone else had seen this issue personally I haven't.
Had you rooted in the past btw? Flashed many magisk modules??
I find it highly unlikely that they could survive this but you could potentially try the magisk removal command, can never remember it it's in my payload dumper guide.
If no one else chimes in I'd say it's an RMA, I've not seen it before, it's strange.
Also (and please don't put it on here) but is your IMEI missing too?
This could be your EFS partition if so.
Edit: found this super old thread for the OnePlus one, same issue.
I think this is fixable, potentially remotely from OnePlus and or anyone else who has access to the updated tool, might be worth mentioning in the MSM thread if you haven't already.
PS: don't follow the guide in the link btw it's for the 1+1 lol, in just putting it here as a reference
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
Click to expand...
Click to collapse
Yes I had to oem unlock again.
As far as I know the phone was not rooted but it's a used phone. Superficially it's in mint condition, I just removed the plastic film just earlier. I'll post in the MSM thread and checkout the new one you posted.
EDIT: the phone has 2 IMEI numbers.
bassamanator said:
Yes I had to oem unlock again.
As far as I know the phone was not rooted but it's a used phone. Superficially it's in mint condition, I just removed the plastic film just earlier. I'll post in the MSM thread and checkout the new one you posted.
Click to expand...
Click to collapse
I've already posted in the MSM thread for you.
What about your fingerprint? Is that still working?
dladz said:
I think it's fixable now I really do
From what I've been reading I think it's a mixture of partitions that have been borked z namely the EFS and potentially the persist.img partition if the same position structure exists that did back in the day.
With that in mind are you able to use your fingerprint? I only ask as persist is linked to it so if that's not working then we may have a correlation between problems.
If it is then it's a ? Over the theory.
I'll keep reading but from what I can gather it seems that EFS and persist at least were linked, can't be sure if they are this point.
Have a look at that link I sent see if anything raises a flag for you, bare in mind it's for an older device
Click to expand...
Click to collapse
So I've never registered my fingerprint on a smartphone, ever, but I thought I would register one of my toes just to figure this thing out. When I get to the Fingerprint Setup screen I get the following error: Enrollment was not completed. Fingerprint registration error, please try again.
Does this help narrow down the issue?
bassamanator said:
So I've never registered my fingerprint on a smartphone, ever, but I thought I would register one of my toes just to figure this thing out. When I get to the Fingerprint Setup screen I get the following error: Enrollment was not completed. Fingerprint registration error, please try again.
Does this help narrow down the issue?
Click to expand...
Click to collapse
Yea for me it does, it shows there's a correlation between the persist problem and the EFS problem and a direct connection to your IMEI or Mac address issue.
With this in mind I would recommend the persist.img fix thread..
Getting that working may be key to solving the Mac / IMEI problem.
At this point nothing is going to hurt.
Here is the thread you'll need.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Now I have not been through this but again it can't hurt at this point.
dladz said:
Here is the thread you'll need.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Now I have not been through this but again it can't hurt at this point.
Click to expand...
Click to collapse
I was about to say, I want to try something along the lines of
fastboot erase modemst1
fastboot erase modemst2
fastboot erase persist
Click to expand...
Click to collapse
or something along those lines from this post https://forums.oneplus.com/threads/no-imei-and-no-efs-backup.322534/page-4#post-14545355 on that old oneplus forum thread you posted.
I'll try the new link you posted instead though.
IMEI is fine btw, the phone dials and connects just fine to cellular.
bassamanator said:
I was about to say, I want to try something along the lines of or something along those lines from this post https://forums.oneplus.com/threads/no-imei-and-no-efs-backup.322534/page-4#post-14545355 on that old oneplus forum thread you posted.
I'll try the new link you posted instead though.
IMEI is fine btw, the phone dials and connects just fine to cellular.
Click to expand...
Click to collapse
Ok don't do the EFS fix you do not have an EFS back up.
Give this a shot
go to data/misc/wifi (required root)
-backup file wpa_supplicant.conf in this folder which contains usename and password wifi
- delete all file in this folder
- turn on wifi ( if you careful, you can reboot )
- now you can connect to wifi
- recovery file wpa_supplicant.conf
This isn't my writing. The English is a little broken but you get the point
I havent seen anyone post a thread for this issue yet, so I will, since I've already seen that I'm not the only one.
I got forced to update to OOS11 after deferring the update for as long as I could. And it's soft bricked my phone. I can boot the stock boot image, but not any images magisk patched by either me or others, flashed or through fastboot boot. After around 5 minutes running the stock boot image it crashes to qualcomm crashdump mode unless i immediately put it into airplane mode to shut off the modem.
This is the dump it gives me:
Code:
ssr:return:MPSS:qmi_oem_svc.c:1310:oem:go_to_error_fata
SDX5x esoc0
modem crash
mdm_get_restart_reason
I can boot into TWRP at least via fastboot boot, so there's that.
All I can think of at this point is to use the msm tool to unfuck my device. But my understanding is that will wipe my phone, and I'm trying to exhaust all other options before turning to that as I really, really, don't want to have to spend four hours setting my phone back up and moving my data back onto it.
Is there any way that I could make the backup and restore process quicker without twrp being able to decrypt anything? Being able to boot a rooted image would at least be a start to that, so I could use titanium backup, but I cant boot a patched image, so I cant make a backup. I was actually going to make one this week before this happened, I'd just been procrastinating.
Stop asking identical questions in multiple places! I already answered you
starcms said:
Stop asking identical questions in multiple places! I already answered you
Click to expand...
Click to collapse
You're talking about someone else, you've never replied to me before. The only other posts I've made on the issue have been agreeing with other people who have also had the same issue. And if thats a problem, well frankly I don't care.
Jvk1166z said:
You're talking about someone else, you've never replied to me before. The only other posts I've made on the issue have been agreeing with other people who have also had the same issue. And if thats a problem, well frankly I don't care.
Click to expand...
Click to collapse
No, it was definitely you because I remember answering that exact question, word for word. I'm not sure if it was a duplicate thread that has now since been deleted by admins or a post in someone else's thread, but I most certainly read it and answered it.
Anyway, in case it was deleted or you missed it, it sounds like your radio's baseband (firmware) got corrupted.
You can try going into bootloader and doing
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
and see if that helps. If not, you are going to need to run the MSM tool to fix it.
Also, TWRP backups don't properly restore on our device, so no real point in making any. I think it will backup and restore boot property, but that's about it. Definitely not system nor data. Will never boot if you try restoring either. If you want to make backups, use the MSM tool.
Swift Backup is also much more reliable for making app data backups than TiBu in Android 10+ (although I still keep TiBu installed and still use it for other things just because I've been using it for 10+ years). Combine with OnePlus's backup and restore app, and it's a very quick, reliable restore of app and system settings amongst everything else.
Edit: And the reason it won't boot at all with the Magisk injected boot image is most likely that you have some Magisk module enabled which isn't compatible with OOS11. You should always disable all modules b4 any updates; good chance that possibly caused your issue in first place.
starcms said:
No, it was definitely you because I remember answering that exact question, word for word. I'm not sure if it was a duplicate thread that has now since been deleted by admins or a post in someone else's thread, but I most certainly read it and answered it.
Anyway, in case it was deleted or you missed it, it sounds like your radio's baseband (firmware) got corrupted.
You can try going into bootloader and doing
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
and see if that helps. If not, you are going to need to run the MSM tool to fix it.
Also, TWRP backups don't properly restore on our device, so no real point in making any. I think it will backup and restore boot property, but that's about it. Definitely not system nor data. Will never boot if you try restoring either. If you want to make backups, use the MSM tool.
Click to expand...
Click to collapse
I have no idea then, because I've only posted this exact post once, maybe it double posted or something.
Either way, I wish I saw your reply earlier, I already resorted to the msm tool and wiped my phone a few minutes ago. But I'll try this if it breaks again for sure. Since I was able to get it to run with airplane mode, I didn't lose any data at least, just lots and lots of configuring to do.
Thanks for the help though.
Jvk1166z said:
I have no idea then, because I've only posted this exact post once, maybe it double posted or something.
Either way, I wish I saw your reply earlier, I already resorted to the msm tool and wiped my phone a few minutes ago. But I'll try this if it breaks again for sure. Since I was able to get it to run with airplane mode, I didn't lose any data at least, just lots and lots of configuring to do. Thanks for the help though.
Click to expand...
Click to collapse
99% chance you would have had to run the MSM tool anyway to fix it, so don't feel bad. Glad it got u back up and running and didn't have deeper corruption in persist or param partitions which MSM tool restore can't help you with. Hopefully you've already backed those up and have them stored safely in at least 2 different places.
starcms said:
99% chance you would have had to run the MSM tool anyway to fix it, so don't feel bad. Glad it got u back up and running and didn't have deeper corruption in persist or param partitions which MSM tool restore can't help you with. Hopefully you've already backed those up and have them stored safely in at least 2 different places.
Click to expand...
Click to collapse
I actually did backup everything in the F8 menu of the MSM tool right before doing the restore, and my fingerprint sensor was working in airplane mode so I'm assuming my persist partition was fine.
I'll remember to disable my modules next time. Never had them break like this before so I never thought to disable them.
Jvk1166z said:
I actually did backup everything in the F8 menu of the MSM tool right before doing the restore, and my fingerprint sensor was working in airplane mode so I'm assuming my persist partition was fine.
Click to expand...
Click to collapse
Yes, if FP sensor is working, your persist is fine, but you should still definitely have a backup because just random things can cause it to become corrupted pretty much any time. A bad canary version of Magisk corrupted mine. It's just dumb luck if yours hasn't become corrupted yet.
Also, running the NSG app can cause your param partition to become corrupt and lose the ability to connect to SA 5G amongst other things (such as making HD+ calls).
However, unlike persist which never ever is supposed to be changed, param is occasionally updated by OTA updates. It was updated by the OTA to OOS11. So while you only need to make one backup of persist, you should regularly backup param after each update to be completely safe. Because the MSM tool restore won't help you if param is corrupt.
HI there,
I totally bricked and messed up my OP8P, it's a non-branded EU-Version and was upgraded to OOS12 via internal the OS-Updater until today morning.
Today I tried to get rooted by patching and using payload-dumper tool... I messed it up and cannot really remember, what I tried now at all... But in the end there is no working OS and no working RECOVERY on my phony anymore.
The only thing that works is FASTBOOT-Mode and a working connection to my Windows-PC - but remember: NO RECOVERY and NO OS, so there ist NO ADB, right?
Code:
> fastboot oem unlock
...
FAILED (remote: Flashing Unlock is not allowed
)
finished. total time: 0.016s
I have no idea, where to start the fixing process at all, and I will need some guidance from you, because I have spent up to 6h now and got no progress.
My goal is a "stock factory resetted" OP8P! (ROOT on OOS11 or 12 is optional and would be nice to have.)
May anyone PLEASE guide me through some step of the needed process? I am really lost and frustraded.
--
THANKS IN ADVANCE!!
Try MSM your phone back to stock. Check it out here.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
HolyHog said:
Try MSM your phone back to stock. Check it out here.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
Guess what - from that moment, I did everything right, all things were just working fine!
Thanks to @paresh1232tg5rgy and the following post, I'm back on oos12 with root.
{No solution in other threads} The current image has been destroyed and cannot boot. Stuck on this screen. Won't budge
Hi, I recently updated my OnePlus 8 Pro. I ordered it from the USA, so I think it's international version IN25.c.21. The latest one, to keep it simple. After installation, it said to reboot, so I clicked reboot now, and after that, it is stuck...
forum.xda-developers.com
Regards