Related
First of all, i have read some similar threads about this, and all advise diffrent solution besides the hardware mod, I have tried for 2 days all methods in Miui forums and none have worked for me except the hardware method.
My Device: Xiaomi Redmi Note 3 Pro / SD version.
State:
-would only show "Mi" logo when powered on.
-Would enter only Fastboot.
- No EDL mode
- No recovery
-bootloader locked
-In this state, you can't flash absolutely nothing with any software. (from fastboot).
Requirements:
- windows 7/ windows 10 x64 edition.
- ONLY LATEST version of miflash, from 2016 onward, so it has the required drivers and methods to work with the phone. (I have tried with older versions and it did not work, i thought there was no hope for my phone).
- one hard bricked Redmi Note 3 Pro
- any fersion of Stable FASTBOOT OFFICIAL rom. (.tgz extension) - I personally used kenzo_global_images_V7.2.3.0.LHOMIDA_20160129.0000.14_5.1_global_c85ba6c524.tgz
- medium disassembly skills,
- a lot of patience,
- minimum set of tools (one small cross screwdriver, 1-2 strong finger nails, good eyesight).
- one microusb cable
HOW TO:
1. uninstall all drivers and software related to the Xiaomi phone. (I ended up reinstalling windows 7 just to be sure all was gone - that is how desperate I became). To be sure this is done correctly, with the phone turned off, connect it to the computer.
Go into device manager, search in com ports, or wherever any drivers are installed for the phone, and uninstall all of them, ticking remove driver files also.
after doing this, hit refresh, and see if any drivers get installed again.
Repeat until there are no drivers installed, and the device will be without a driver.
2. Disconnect the phone and RESTART WINDOWS
3. Disable driver signature verification/enforcement:
a. in windows 7, this is easy: restart windows, hit f8 until a menu pops up where you can choose disable driver signature verification/enforcement.
b. in windows 10, it is a little bit longer, but: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/ - Be careful, when choosing the option in the last menu, use F... keys, not number keys.
4. while in windows, in the bottom right corner, there should be a message saying "test mode"
5. install ONLY the LATEST VERSION of Miflash! you may get some messages about driver installation (2 times), allow installation!
6. RESTART WINDOWS
7. Prepare the phone!: I followed the video here, even I did not understand the language: http://choimobile.vn/threads/video-...o-snapdragon-650-fix-download-mode-edl.65098/
- First, I used my nail to open the phone up, just like in the video. It is great that the screen is not glued to the body, there are only some clips holding it in place!
- after opening the cover please be careful - there is a cable connecting the case to the mainboard - the fingerprint sensor.
- after this, unscrew the 7 or 8 screws as in the video.
- unlock the cables as in the video - please be sure not to disconnect all the cables.
- now, first get the antenna plastic cover outside of the way.
- after disconnecting the camera module, I would personally advise you to get the camera out of the way first, as there is a piece of foil glued between the mainboard and the underneath of the camera module (on the display)
- with great care, rise the Mainboard from the display.
- to have better access to the testpoint pins, I turned the Mainboard over the battery.
- now, connect the microusb cable to the phone.
8. connect the phone to the computer.
9. go into device manager and check if there are any devices installed, there should be under ports.... a device called Qualcomm HS-USB Diagnostics 900E.
10. Now comes the tricky part, switching the phone to EDL mode (emercency download)
look on the back of the motherboard of the phone to connect the 2 testpoint pins as in the video. You can use anything to do this. a metal wire, a small scissors, an untied paperclip... You will have to do this while device manager is opened, as you must check it when the driver changes to "qualcomm hs-usb qdloader 9008".
Please be careful when trying to connect the 2 pins not to touch any metal housing, ans this will restart the device each time.
Now, try and try and try until the driver changes to "qualcomm hs-usb qdloader 9008".
11. unzip the rom using 7 zip to a destination of your choosing. I advise as short destination as possible and no spaces used in the folder naming. I unpacked it in C:\rom\
12. Open Miflash
13. As per other many many instructions:
a. click browse - select the folder where you unpacked the rom (for me, c:\rom\)
b. click the arrow next to brows button and select advanced.
c. in the first field, navigate to the folder where the rom was unpacked and select flashall.bat
d. in the third field select prog_emmc_firehose_8976_ddr.mbn from the "images"folder in the folder whre he rom was extracted
e. field 7: rawprogram0.xml and field8: patch0.xml
f. Hit the Refresh button, the device should appear as a com port in the white field of Miflash.
g. just to be sure, tick also "flash all" in the bottom of miflash.
14. Hit the Flash button on Miflash and this should be the last step before powering up your revived Xiaomi Redmi Note 3.
This is what I learned in the past 2-3 days.
Different errors I got during the learning process and what i did to avoid them:
- different problems with drivers not installing correctly or showing different device names - just use the method i pointed out in the beginning to uninstall any driver previously installed on the computer, with the refresh in device manager and than uninstalling all.
- "end of package" error at second 2 while flashing in Miflash - you are using an older or an unsupported version of miflash, just use the latest one.
- not being able to flash anything while in fastboot - if you have a locked bootloader, on redmi note 3 snapdragon version, you simply won't be able to flash anything. end of story. this is the whole purpose of having a locked bootloader.
- trying to go into EDL mode using fastboot comand "fastboot oem eld" - this will not work for a really bricked device as was mine. the only solution is to go through the tespoint pin connection.
i wonder if there's a way not to make trwp locked in the recovery partition, so if someone flashes a factory rom without precaution, twrp will simply get overwritten by factory recovery. Wouldn't that prevent these hard bricks?
btw, nice guide
Please move the thread into guides/tutorial section.
Well, mine was bricked too 2 days ago... even I already unlock the bootloader using the official way.
It happened because I'm on AOSP and I flash Xiaomi.EU ROM from TWRP.
'MI' Logo flashed twice then the phone turns off itself.
It can't boot, can't enter EDL mode. I just can go into fastboot mode. But nothing can be done there because it always says 'device is locked'.
'fastboot oem device-info' also says the phone is on locked state.
Dunno why this happen, I think its because I play with the unlock bootloader toggle on previous MIUI and AOSP ROM.
After countless of times trying to get into EDL, I give up.
Device manager always show "QCom HS-USB Diagnostic 900E" instead of "QCom HS-USB QLoader 9008"
Finally I try the official Mi Unlock software, re-unlock success and BAM... Phone boots again into system. lol...
This makes me think the bricked problem can prevented/solved to by:
- At least bind a Xiaomi Account to your phone once when using official ROM (recommended China Dev ROM)
- Use that account to apply for the unlock, and when you got the phone bricked/relocked, you can re-unlock it using official way to revive the phone
Now is possible unbrick without disassembly:
http://en.miui.com/thread-267263-1-1.html
http://www.htcmania.com/showthread.php?t=1174700
jujusito said:
Now is possible unbrick without disassembly:
http://en.miui.com/thread-267263-1-1.html
http://www.htcmania.com/showthread.php?t=1174700
Click to expand...
Click to collapse
please read through all the thread, don't just throw in a link. the method mentioned by you will not work on some bricked devices, including mine. this did not work for me, so I ended up disassembling the phone.
aabenroi said:
Well, mine was bricked too 2 days ago... even I already unlock the bootloader using the official way.
It happened because I'm on AOSP and I flash Xiaomi.EU ROM from TWRP.
'MI' Logo flashed twice then the phone turns off itself.
It can't boot, can't enter EDL mode. I just can go into fastboot mode. But nothing can be done there because it always says 'device is locked'.
'fastboot oem device-info' also says the phone is on locked state.
Dunno why this happen, I think its because I play with the unlock bootloader toggle on previous MIUI and AOSP ROM.
After countless of times trying to get into EDL, I give up.
Device manager always show "QCom HS-USB Diagnostic 900E" instead of "QCom HS-USB QLoader 9008"
Finally I try the official Mi Unlock software, re-unlock success and BAM... Phone boots again into system. lol...
This makes me think the bricked problem can prevented/solved to by:
- At least bind a Xiaomi Account to your phone once when using official ROM (recommended China Dev ROM)
- Use that account to apply for the unlock, and when you got the phone bricked/relocked, you can re-unlock it using official way to revive the phone
Click to expand...
Click to collapse
I also applied for an unlock code, but this takes up to 15 days, and I have the phone for only 3 days . I could not wait for the code, I had to do something to revive it.
meangreenie said:
i wonder if there's a way not to make trwp locked in the recovery partition, so if someone flashes a factory rom without precaution, twrp will simply get overwritten by factory recovery. Wouldn't that prevent these hard bricks?
btw, nice guide
Click to expand...
Click to collapse
I made a modified TWRP which will not cause hard bricks
Rajdip said:
I made a modified TWRP which will not cause hard bricks
Click to expand...
Click to collapse
great work! your modded twrp will no doubt save me when i forget i have to delete the emmc file in the future.
Dear, thank you for your contribution, this deserves to be a section more important, really saved my phone from the hard brick. Again very grateful
how do i know what a test point looks like on any phone? like the new redmi 3s? i cant get into edl because im stuck in Qualcomm HS-USB Diagnostics 900E
xdarkmario said:
how do i know what a test point looks like on any phone? like the new redmi 3s? i cant get into edl because im stuck in Qualcomm HS-USB Diagnostics 900E
Click to expand...
Click to collapse
maybe look for something like this?
http://choimobile.vn/Temp/Testpoint_Redmi_Note3_PRO_3.jpg
I doubt they will have much variance from xiaomi phone to phone to make it easy for factory / repair centers to fix many models... (I could be wrong though), other brands are probably different.
Well you can enter edl mode from fastboot via this simple tool
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
And then you can flash any miui .tgz based rom and resurrect.
I hard bricked my Device last night and resurrected
PS : you must have the MiPcSuit installed
ilvmyname said:
Well you can enter edl mode from fastboot via this simple tool
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
And then you can flash any miui .tgz based rom and resurrect.
I hard bricked my Device last night and resurrected
PS : you must have the MiPcSuit installed
Click to expand...
Click to collapse
links dead
Quick addition: if you're using Virtual Box, like me (on a mac), you need to enable USB 2.0 on the virtual machine. On Virtual Box, this means you have to add an extension pack. This might save you 48hrs, like it cost me
EDIT: SOLUTION (Not a fix)
For those who are stuck at "50% saying current account is different from the a/c info of device"
It is due to the database miss-match in their server ,the possible sollution are :
Remember: for MediaTek devices you will have to first flash a China Dev ROM onlu then you can get the unlock successful.
But this is not a recommendation for Qualcomm Devices.
1. Go to i.mi.com and look weather your device shows up in the find device (this is required only to be sure as to your device is connected to their server and they have updated the info on your Device too).
2. Reset your Phone sign in and turn on find device. turn on usb debug and oem unlock connect to pc allow whatever is asked on your phone also check always trust, then open adb folder and open cmd there and type adb devices your phone will ask for authorisation allow it and check always trust.
3. Mail your concern with user ID and also the snapshot of the error as they will ask for it,to your regional service (I am an indian so i had to mail it at [email protected])(just google contact xiaomi) wait for their reply.
You can PM these persons on MIUI forum regarding the 50% stuck issue.
{ EDIT 2:
You may contact these person in MIUI forum:
1) vincent_khoo
2) PatrickXi
( @bravonova gave me these names you may try I haven't cross checked as mailing will most probably solve) }
The last method should Work for everyone as it's a db miss-match which should be fixed after this.
PS: This a solution and not a fix so it will take time.
PPS: Don't blame me for all the trouble Blame Xiaomi.
ilvmyname said:
Ok, so I have been trying to move to miui 8 global beta version now for a long time and haven't succeeded, the updater app says could not verify update package.
I have a pretty good net connection so that's not an issue.
Also If I try download latest rom it says "Can't download update, wait a minute or two" and this it has been saying for about a week now (ironic).
So, I requested for unlocking the bootloader got the confirmation messages after 3 days tried to unlock now stuck at 50% saying "account is different from the account in the phone info"
I don't want to use the fast boot edl method of flashing rom as my lappy keeps getting sudden shutdown, so I don't want it to shutdown in between and get hard bricked.
I have tried MiPc suit but since it cannot do a backup(again app bug) so cannot flash through it.
I have looked in to the mi cloud and my phone does gets located.(possible solution given for unlock bootloader but even that didn't work).
Can anyone please help me on this or will I have to be on this ****ty unrooted Rom forever.
Currently on miui 7.5.3.0 global stable rom.
Any suggestions will be appreciated ty
Click to expand...
Click to collapse
I unlocked it just today!make sure all drivers are installed..boot into fastboot mode :- power off then hold vol down + power button.w8 for the drivers to get installed
Now boot into recovery mode :- turn off device and hold volume up + power button.w8 for the drivers to get installed.
I was stuck at the same 50% error..one of d xda member told me to boot into recovery mode and let the drivers get installed and taddaa...bootloader unlocked
Make sure u r logged in to the same account in ur phone u r using to unlock the bootloader
I fixed this by updating to latest version in miui app in fastboot mode.
Same problem for me. I tried using the MIUI PC Suite, it tells me my phone isnt up to date even though it is. Recovery mode drivers fail. Requested unlock over 2 weeks ago and got the SMS 9 day ago... still stuck at 50% error. Its driving me nuts.
Warrimonk said:
Same problem for me. I tried using the MIUI PC Suite, it tells me my phone isnt up to date even though it is. Recovery mode drivers fail. Requested unlock over 2 weeks ago and got the SMS 9 day ago... still stuck at 50% error. Its driving me nuts.
Click to expand...
Click to collapse
i today unlocked my bootloader...try doing this go into recovery mode by pressing power+volumeup button. You will see a picture telling you to connect ur phone to pc using usb cable..connect your phone to your pc now w8 and let the drivers get installed and try again..i did dis and unlocked it today before that i was getting the same error even today got the same error before doing this.
hitesh1792 said:
i today unlocked my bootloader...try doing this go into recovery mode by pressing power+volumeup button. You will see a picture telling you to connect ur phone to pc using usb cable..connect your phone to your pc now w8 and let the drivers get installed and try again..i did dis and unlocked it today before that i was getting the same error even today got the same error before doing this.
Click to expand...
Click to collapse
First of all thanks for the reply sir but
I tried entering to recovery mode and then connect to pc but nothing happens, I mean it does not show connected even after say 5 minutes.
Although when trying to enter into the fastboot mode and then connecting to pc the drivers do get install and it shows connected and stucks at 50%
I do have adb drivers RN3 USB drivers installed on my pc
But all things in vain.
Garyj881 said:
I fixed this by updating to latest version in miui app in fastboot mode.
Click to expand...
Click to collapse
I am sorry sir but I didn't get you, you updated to latest version of miui through the updater app right? And then entered to fastboot mode to unlock right?
My updater app also doesn't work It says cannot verify update package and so I am stuck like from all corners.
ilvmyname said:
First of all thanks for the reply sir but
I tried entering to recovery mode and then connect to pc but nothing happens, I mean it does not show connected even after say 5 minutes.
Although when trying to enter into the fastboot mode and then connecting to pc the drivers do get install and it shows connected and stucks at 50%
I do have adb drivers RN3 USB drivers installed on my pc
But all things in vain.
Click to expand...
Click to collapse
Are you able to see this pic on your device when you enter recovery mode??
hitesh1792 said:
Are you able to see this pic on your device when you enter recovery mode??
Click to expand...
Click to collapse
Yes
ilvmyname said:
Yes
Click to expand...
Click to collapse
connect your device to your pc and let the drivers get installed...and if u are using a desktop pc do not use the usb port which is at the front of the cpu..use the one which are at the back of the cpu...the image i am attaching shows which drivers get installed.
after drivers get installed remove usb cable and again boot into fastboot mode (power + volume down ) and try again to unlock bootloader
hitesh1792 said:
connect your device to your pc and let the drivers get installed...and if u are using a desktop pc do not use the usb port which is at the front of the cpu..use the one which are at the back of the cpu...the image i am attaching shows which drivers get installed.
after drivers get installed remove usb cable and again boot into fastboot mode (power + volume down ) and try again to unlock bootloader
Click to expand...
Click to collapse
Okay, so i am missing drivers i guess.
Have you pre installed any drivers if so can you provide me a link?
as when i connect into recovery mode only the bootloader interface driver get install and nothing else and hence it still doesn't show connected in the recovery mode.
ilvmyname said:
Okay, so i am missing drivers i guess.
Have you pre installed any drivers if so can you provide me a link?
as when i connect into recovery mode only the bootloader interface driver get install and nothing else and hence it still doesn't show connected in the recovery mode.
Click to expand...
Click to collapse
strange!bootloader interface driver gets installed when connected in fastboot mode..uninstall that driver connect your phone in recovery mode and see if dese drivers get installled..nope i do not have any link because as soon as i connected my phone into recovery mode the drivers automatically got installed!
ps :- i was able to unlock bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global_f5889c1549
i too have the same problem !! if you got the solution please tell me !!
T/[email protected]$ said:
i too have the same problem !! if you got the solution please tell me !!
Click to expand...
Click to collapse
i was able to unlock the bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549...
i was not able to unlock it before i connected my phone into recovery mode and installed the drivers on my pc..as soon i did it the bootloader got unlocked .before that i was getting the same error even after flashing the V7.3.7.0.LHOMIDD firmware
hitesh1792 said:
i was able to unlock the bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549...
i was not able to unlock it before i connected my phone into recovery mode and installed the drivers on my pc..as soon i did it the bootloader got unlocked .before that i was getting the same error even after flashing the V7.3.7.0.LHOMIDD firmware
Click to expand...
Click to collapse
how to flash kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549.?
when i connect my device in recovery mode nothing happens
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
T/[email protected]$ said:
how to flash kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549.?
when i connect my device in recovery mode nothing happens
Click to expand...
Click to collapse
it must install the drivers...please do check out the steps mentioned above by the xda member "otyj" he helped me to unlock my bootloader
I had the same problem and believe me I did everything possible as you are also advised in this forum.
But it had nothing to do with this.
Just wait and watch.. try everyday once and I think you will get in 7-10 more days.
I was also frustated at that time but now I can unlock everysingle time I want when it gets locked.
otyg said:
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
Click to expand...
Click to collapse
where can i find fastboot images ?
and when i plugin in recovery mode nothing happens !!
and your were telling that app will be installed in phone when we connect wiith mi pc suit, can you clearly explain it ?
otyg said:
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
Click to expand...
Click to collapse
Okay I will try flashing a rom through MiFlash toll b'coz the above methods didn't work and will quote if that's how it gets fixed
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you
(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.
I can abd sideload and update from SD card, but everything I have fails signature verification.
edit: so frustrating trying to find that 1 zip
Dizzee said:
(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.
Click to expand...
Click to collapse
Just use MiFlash, that one's guaranteed to work. Read my DFU unbrick guide to know how to use it. Just skip the part where you have to disassemble the phone, since you can get to EDL mode by (with the phone off and the USB cable connected to the PC) holding both volume buttons and inserting the USB-C cable to the phone.
I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...
Dizzee said:
I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...
Click to expand...
Click to collapse
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?
Choose an username... said:
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?
Click to expand...
Click to collapse
I got it from here: http://www.ztedevice.com/support
selected:- United Kingdom > Mobile Phone > Axon 7
it offers a file "AXON 7(ZTE A2017G) SD card software package(328540B2634ZTE A2017GV1.0.0B11)"
which hints at being compatible with A2017G... but is A2017V and is chinese, although you can change the language in settings there is still plenty here and there, plus chinese bloatware
and No, I didn't get cell signal.
I've gone back to Marshmellow, I will try again, didn't think it would be so different/difficult... Although wow at MiFlash.
FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!
Dizzee said:
FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!
Click to expand...
Click to collapse
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:
Choose an username... said:
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:
Click to expand...
Click to collapse
... after I finally got it working again (thanks for the assist), I thought relocking it was just making it secure again. I been rooting/unrooting and swapping out roms since the galaxy s2, who'd think you can't unlock and relock... I do think there should be warnings as it is too easy a mistake to make... lmao stop doing dumb stuff you start first
My phone is insured so I'm not overly fussed, but others will be less fortunate.
hello everywone...i have a troble to...my phone is A2017GV1.2.0B04 like this in post.
I bay this phone whit broken screen, i change the screen and try sim card but the phone is locked Whit google account... When I try my sim to test microphone, the phone it's work OK, but I unlock google account whit add tools and after that my phone don't have a service.
Phone tells no service or turned off airplane mode...what is not true... I can change the 4g/3g/2g connection to only 3g or something else... Wi-Fi and everything else work great but no service... The phone see what operator is on sim but no service... Somebody to help me please and tell me some tutorials how to fix?
I by this phone from Denmark and now I'm in Serbia... Eny help please
Thanks anyway Dragan
---------- Post added at 08:30 PM ---------- Previous post was at 08:27 PM ----------
Mistake,whit adb tools...
Hi guys
At first - I tried a method given on this forum: https://forum.xda-developers.com/mi-a1/help/phone-goes-to-qualcomm-hs-usb-qdloader-t3757867
This method doesn't work for me, because after disconnect my PC doesn't recognize my phone.
Phone is in Qualcom HS-USB Diagnostics 900E mode after OTA update (Mi A1 April Update) - strange
So guys... I know there are some magicians who can do almost everything.. Any ideas what to do?
Does MiFlash recognize your phone? If not, try instaling ADB drivers nd disable driver enforcment,
To kick device out of diagnostic mode and into QDLoader you will need either:
1) A "deep flash" cable
2) Take the phone apart and bridge test points
There are guides online for both, you can Google. You can make deep flash cable yourself fairly easily with a spare USB cable. Testpoint location is found easily via Google and can be bridged with tweezers or small flat-head screwdriver.
I did NOT have success with deep flash cable myself, I had to use testpoint method (and sadly broke my LCD in the process). The deep flash issue might of been because I was in Windows 10 x64 or on a USB3 port. If you do go that route and can't get it working, try with a Windows 7 x86 VM and USB2 passthrough mode before last resort of taking device apart.
Hold power button for 20 sec then volume down and fastboot will apear
1. install all necessary drivers (adb, qualcomm's HS-USB Diagnostics 900E, xiaomi flash tool)
2. use test point method as suggested by @CosmicDan - lots of tutorial on web on how to do this. Carefully read this before actually attempting it.
3. When you successfully do the test point method you will hear the device recognized sound on your computer
4. when you hear it, open miflashtool and your device should show up in it.
5. if not, reboot your PC. You should reboot your PC after installing all the drivers. See #1. (reboot required)
6. Once you successfully see your device on miflashtool, you can flash the fastboot rom of your choice.
7. (you might get stuck on "Can't receive hello packet" dialogue which will prevent your device from flashing), in that case change the USB port, possibly to USB 2.0 and try the test point flash method again to get detected and try flashing again.
8. Test point method should be done everytime you disconnect the USB from your phone and computer, hopefully you only need to do it twice.
9. Sadly for me, I am still unable to flash stock roms with this method, my problem is kind of unique, after flashing it shows me "Your phone is destroyed, press power to turn off" dialogue. lmao
10. if you get the same message then you dun goof'd. Hopefully yours will successfully flash.
Oh and only one version of fastboot ROM actually revives the phone, other fastboot roms actually puts it to coma (vibrating every one second, no display, no nothing). Only one fastboot ROM allows me to go to fastboot and flash recoveries. But if I flash any ROM (stock or custom) it kills the phone again and I have to repeat the given method and try again with another rom. I think the phone is effectively dead. What a **** phone! lol
udaan said:
1. install all necessary drivers (adb, qualcomm's HS-USB Diagnostics 900E, xiaomi flash tool)
2. use test point method as suggested by @CosmicDan - lots of tutorial on web on how to do this. Carefully read this before actually attempting it.
3. When you successfully do the test point method you will hear the device recognized sound on your computer
4. when you hear it, open miflashtool and your device should show up in it.
5. if not, reboot your PC. You should reboot your PC after installing all the drivers. See #1. (reboot required)
6. Once you successfully see your device on miflashtool, you can flash the fastboot rom of your choice.
7. (you might get stuck on "Can't receive hello packet" dialogue which will prevent your device from flashing), in that case change the USB port, possibly to USB 2.0 and try the test point flash method again to get detected and try flashing again.
8. Test point method should be done everytime you disconnect the USB from your phone and computer, hopefully you only need to do it twice.
9. Sadly for me, I am still unable to flash stock roms with this method, my problem is kind of unique, after flashing it shows me "Your phone is destroyed, press power to turn off" dialogue. lmao
10. if you get the same message then you dun goof'd. Hopefully yours will successfully flash.
Oh and only one version of fastboot ROM actually revives the phone, other fastboot roms actually puts it to coma (vibrating every one second, no display, no nothing). Only one fastboot ROM allows me to go to fastboot and flash recoveries. But if I flash any ROM (stock or custom) it kills the phone again and I have to repeat the given method and try again with another rom. I think the phone is effectively dead. What a **** phone! lol
Click to expand...
Click to collapse
Did you do factory flash mode? That's the only one that can recovery it, the other scripts won't flash everything.
Note that because you didn't backup partitions you will also wipe the IMEI, or so I've read (I backed up my whole device via emmcdl before brick so I was able to recover fine without miflash)
CosmicDan said:
Did you do factory flash mode? That's the only one that can recovery it, the other scripts won't flash everything.
Note that because you didn't backup partitions you will also wipe the IMEI, or so I've read (I backed up my whole device via emmcdl before brick so I was able to recover fine without miflash)
Click to expand...
Click to collapse
Actually I think I got scammed. It is Mi5x sold as MiA1. ****ing chinks! Anyway, I managed to install (Tiffany) on it and now it is booting to boot logo and bootlooping. I can get to fastboot and default (MIUI's) recovery by pressing button combos. But OEM is locked now so I cannot flash TWRP or other ROMs in it. I will have to EDL flash back to that MIA1 ROM to get it unlocked from fastboot. Otherwise MIUI unlocker asks me to link my miui account to this phone by going to settings, which I can't do because it is not booting up.
funny situation.
Bruce666 said:
Hi guys
At first - I tried a method given on this forum: https://forum.xda-developers.com/mi-a1/help/phone-goes-to-qualcomm-hs-usb-qdloader-t3757867
This method doesn't work for me, because after disconnect my PC doesn't recognize my phone.
Phone is in Qualcom HS-USB Diagnostics 900E mode after OTA update (Mi A1 April Update) - strange
So guys... I know there are some magicians who can do almost everything.. Any ideas what to do?
Click to expand...
Click to collapse
Facing The same Issue
---------- Post added at 10:42 AM ---------- Previous post was at 10:35 AM ----------
Phone Showing Charging Only
Can't Even Transfer Data
Not Detected on Pc
udaan said:
1. install all necessary drivers (adb, qualcomm's HS-USB Diagnostics 900E, xiaomi flash tool)
2. use test point method as suggested by @CosmicDan - lots of tutorial on web on how to do this. Carefully read this before actually attempting it.
3. When you successfully do the test point method you will hear the device recognized sound on your computer
4. when you hear it, open miflashtool and your device should show up in it.
5. if not, reboot your PC. You should reboot your PC after installing all the drivers. See #1. (reboot required)
6. Once you successfully see your device on miflashtool, you can flash the fastboot rom of your choice.
7. (you might get stuck on "Can't receive hello packet" dialogue which will prevent your device from flashing), in that case change the USB port, possibly to USB 2.0 and try the test point flash method again to get detected and try flashing again.
8. Test point method should be done everytime you disconnect the USB from your phone and computer, hopefully you only need to do it twice.
9. Sadly for me, I am still unable to flash stock roms with this method, my problem is kind of unique, after flashing it shows me "Your phone is destroyed, press power to turn off" dialogue. lmao
10. if you get the same message then you dun goof'd. Hopefully yours will successfully flash.
Oh and only one version of fastboot ROM actually revives the phone, other fastboot roms actually puts it to coma (vibrating every one second, no display, no nothing). Only one fastboot ROM allows me to go to fastboot and flash recoveries. But if I flash any ROM (stock or custom) it kills the phone again and I have to repeat the given method and try again with another rom. I think the phone is effectively dead. What a **** phone! lol
Click to expand...
Click to collapse
Im sorry, exactly with which ROM did you get to the fastboot?
Press power button for 15 sec
If you feel vibration then you are so lucky
boshell said:
Im sorry, exactly with which ROM did you get to the fastboot?
Click to expand...
Click to collapse
Fastboot rom for Mi5x because the phone is Mi5x.