Related
I purchased a SMA-R smartwatch. The official app for this watch is the Fundo Wear app. When I load VXP files into the appmanager folder the VXPs do not show up in the app. I have installed the Mediatek smartdevice app. The VXP files show up, I can install them on the watch, even get an install message on the watch, but the installed faces do not show up.
Anyone know how to load custom faces on this watch?
My appologies if this has been covered before. SMA-R search comes up with every mention of "smartwatch".
JKSurf said:
I purchased a SMA-R smartwatch. The official app for this watch is the Fundo Wear app. When I load VXP files into the appmanager folder the VXPs do not show up in the app. I have installed the Mediatek smartdevice app. The VXP files show up, I can install them on the watch, even get an install message on the watch, but the installed faces do not show up.
Anyone know how to load custom faces on this watch?
My appologies if this has been covered before. SMA-R search comes up with every mention of "smartwatch".
Click to expand...
Click to collapse
Hi,
I have sma watch too, it was working at this form:
Connetct the watch with the cable to the computer, open at mass storage mode. On the computer copy the folders to the watch, maximum 3 at one time, no more!
After this, on the watch at file manager go to the folder you want's to install, open vxp file and look, it is works on the watch.
Very important, no more than 3 install same time!
Before you uninstall watchface from watch, make your watchface for original watchface what was come with the watch! If not, your watch will be bricked as mine.
Please make a save from your firmware because my is bricked and I search for firmware.
Here is the step by step guide to make it.
Please post the firmware here in xda.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Regards,
Tamas
Matuskaur said:
Hi,
I have sma watch too, it was working at this form:
Connetct the watch with the cable to the computer, open at mass storage mode. On the computer copy the folders to the watch, maximum 3 at one time, no more!
After this, on the watch at file manager go to the folder you want's to install, open vxp file and look, it is works on the watch.
Very important, no more than 3 install same time!
Before you uninstall watchface from watch, make your watchface for original watchface what was come with the watch! If not, your watch will be bricked as mine.
Please make a save from your firmware because my is bricked and I search for firmware.
Here is the step by step guide to make it.
Please post the firmware here in xda.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Regards,
Tamas
Click to expand...
Click to collapse
I installed the ulefone firmware on my sma-r. It works great and takes custom faces. Try it out! I tried to make a backup of sma-r firmware and it failed.
JKSurf said:
I installed the ulefone firmware on my sma-r. It works great and takes custom faces. Try it out! I tried to make a backup of sma-r firmware and it failed.
Click to expand...
Click to collapse
Can you please share the ulefone firmware please.
Soham Biswas said:
Can you please share the ulefone firmware please.
Click to expand...
Click to collapse
here it is
my original firmware backup from Lemfo GW01
R02S_GW01_2_T6_L2_G4_HANCAI_B_1711011748
Release time
2017/11/01 14:48
https://drive.google.com/open?id=1UsfbdWdu05F_BJYo846rfvPbwmN5NtAm
coolpixs4 said:
here it is
my original firmware backup from Lemfo GW01
R02S_GW01_2_T6_L2_G4_HANCAI_B_1711011748
Release time
2017/11/01 14:48
https://drive.google.com/open?id=1UsfbdWdu05F_BJYo846rfvPbwmN5NtAm
Click to expand...
Click to collapse
Thanks a lot. Can you please guide me how to install this backup
Soham Biswas said:
Thanks a lot. Can you please guide me how to install this backup
Click to expand...
Click to collapse
Here you go: http://www.chinawatchs.com/mtk-smartwatch-update-the-proper-way/
but first try to look thru the thread https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Ive been combing forum posts and links for days now trying to figure out what version of the dz09 I have. I've tried every scatter file and rom I could get my hands on and everything gives me a "s_brom_download_epp_fail (2036)" error. FlashTool wont let me do a memory test and I'm not quite sure how to do a backup at least i dont think i can do one without a valid scatter file.
Scatter_for_16_32_64_128MB_MT62xx_by_dfgigger_for_4PDA (scatter_for_backup&format_created_by_dfgigger) wich appears to be a universal scatter file didnt work for me either. I'm stumped.
Maui Meta says this;
[Version]
BaseBand chip version=MT6260
ECO version=
DSP firmware version=2000.00.00
DSP patch version=1.0
Software version=X9A_LSSD_JL_GX7789_4LIN1_EU_ARABIC_2W_SP0821_0509
Hardware version=X9_11B_HW
Melody version=Unknown
Can someone please point me in the right direction on what else I can try?
I have same problem. Could anyone help us?
xalach said:
I have same problem. Could anyone help us?
Click to expand...
Click to collapse
here is a downloadlink for the same firmware dump
maybe helps
http://4pda.ru/forum/lofiversion/index.php?t713552-2560.html
I can't download from this site. All files are not available.
I`m ruined original firmware without backup. Can`t find firmware on the web. Microwear H5 firmwares are (almost) compatible except weird and unreadeble screen. Requesting backup or firmware.
Stevea 76 says that all i need is original boot.img.
If you go to the official website for the Microwear smartwatch at microweartech they have a Support icon on the homepage then a Firmware option in a list. On that page is an email address to request the needed firmware file for flashing the Microwear H7 with a PC.
Update: I'm Sorry but I wrote this before trying the email address. The support and marketing email addresses shown on the website are down. There is a tab on the site that says messages where I sent a note and am waiting for a reply. There are a few addresses and numbers throughout the site that I will try too. If I can get the firmware I'll upload it. They are very clear about the firmware file existing and being available upon request so it must be obtainable.
Am i the only one user of this watch?
Yes, i`m kind of idiot, so i bought second watch, and i made backup of them. So i debricked first one. If anyone interested in my backup, please inform me.
drownboy said:
Yes, i`m kind of idiot, so i bought second watch, and i made backup of them. So i debricked first one. If anyone interested in my backup, please inform me.
Click to expand...
Click to collapse
You should post it online to help out other people.
1. I made full backup via flashtool - this means it will clone my IMEI on next flashing watch.
2. I don`t know how to make a "ROM" from backup.
3. Backup weights more than 5 GB, and it`s kindly costly in my country, because i have only 10 GB of traffic per month.
So, can anyone teach me how to make a ROM from backup?
Open *_Android_scatter ...
partition_index: SYS0 (- SYS25) ...
is_download: true ? (= preloader_*, lk, boot, recovery, logo, secro, trustzone*, system, cache, userdata) + *_Android_scatter ONLY
Send to > Compressed (zipped) folder > FX9_V1.3_H7_NJY_B_yyyymmdd-hhMM
Open *_Android_scatter ...
partition_index: SYS0 (- SYS25) ...
is_download: true ? (= preloader_*, lk, boot, recovery, logo, secro, trustzone*, system, cache, userdata) + *_Android_scatter ONLY
Send to > Compressed (zipped) folder > FX9_V1.3_H7_NJY_B_yyyymmdd-hhMM
Click to expand...
Click to collapse
kinda of magic mumbo-jumbo to me ^^
I tried out ROM_BACKUP-SPLITTER application and it did some work, but there is no preloader file.
Flashtool backup size is 7,5 GB, i`m ready to save it on googledrive, but inside still my personal data.
Please, give me a link for splitting manual.
Guest Quick Reply said:
Backup first ...
WwR_MTK_v2.30
?v=GMAytZ56hac
Click to expand...
Click to collapse
??
All is done. i`ll place firmware on cloud soon.
I tried to flash my watch with this firmware, it` s working!
g.disk
recommend
Can you tell me pros and cons from this watch. I'd like to buy one. I hope it's good for $52.
hi, there is any rom update for this smartwatch?
Inside
Here is some picture from H7 inside.
https://photos.app.goo.gl/9pCzEGHn6hDaEN9HA
https://photos.app.goo.gl/f2KGxaJcWdW9qw279
https://photos.app.goo.gl/b2pEjzuh8bgyFbxy5
https://photos.app.goo.gl/2bwxsWH9zkpQsqh67
I remove the connectors from antenna cables,because chinese swap the antennas in strap,
The WIFI work for max. 3m and BT for 30cm. GPS not work. I removed the strap and plug it vice versa everithing worked fine,but i cannot connect the connectors. I need longer cable. I don't know how can i solve this problem at this moment,but i'm thinking.
Nice DIY pic's! kudos
I found a solution for call sound not routed to bluetooth headset. Install this,and everything work fine. dialer Make call this dialer and you can hear the voice in headset. You need some configuration for good look.
Hello I need help, by mistake I flashed SP_Flash_Tool a version that in the end was incompatible with my AC8227 YT9216B with what remained brick.
I am trying to recover it with versions that download YT9217 and YT9218 but it is known that they are very different from the version that I had the YT9216B_00002_v004_20190530 and by means of USB bridging the test point close to negative but even though the program SP_Flash_Tool- 5.1916 always ends with failure 4032 or 5054 both related to the DMRAM.
There would be someone in the forum that could help me indicating where to find the link to download my ROM? I have already reviewed the month of 400 pages of the 4PDA forum and I did not find it.
I believe this (Link) is the version you are looking for. Its a memory dump. If you need help flashing it, follow the instruction here. Error 4032 means you are not using correct scatter file. and 5054 means there is not correct preloader file to go with the scatter. You can try the one I have shared, or copy the 2 files from other similar firmwares offered at 4pda
I hope it helps.
lmmerono said:
Hello I need help, by mistake I flashed SP_Flash_Tool a version that in the end was incompatible with my AC8227 YT9216B with what remained brick.
I am trying to recover it with versions that download YT9217 and YT9218 but it is known that they are very different from the version that I had the YT9216B_00002_v004_20190530 and by means of USB bridging the test point close to negative but even though the program SP_Flash_Tool- 5.1916 always ends with failure 4032 or 5054 both related to the DMRAM.
There would be someone in the forum that could help me indicating where to find the link to download my ROM? I have already reviewed the month of 400 pages of the 4PDA forum and I did not find it.
Click to expand...
Click to collapse
viktorsaari said:
I believe this (Link) is the version you are looking for. Its a memory dump. If you need help flashing it, follow the instruction here. Error 4032 means you are not using correct scatter file. and 5054 means there is not correct preloader file to go with the scatter. You can try the one I have shared, or copy the 2 files from other similar firmwares offered at 4pda
I hope it helps.
Click to expand...
Click to collapse
Thank you very much for your help, I will try it immediately to see if with a little luck and your copy of the firmware convinces my computer and starts once and for all, although I do not have too much hope, but anyway, we will try achieve.:good
Nothing, still the same, error 4032 put it as you put it.
Connected to a 12V source the screen starts in a blue color and there is no change unless the reset button is pressed, I don't know if that can indicate any other fault such as that the MCU memory had been erased or corrupted and that is why he does not stop doing anything but the question is that following the procedure for the use of the "test point" step by step always cindependently of using a flash tool or another, of using different scatter files or firm YT9216 / 17/18, B, Whatever the question is, always, always the blissful error 4032 above all.
I don't know what to do, any suggestion is accepted even if it is to use a hammer as a tool.
did you try the scatter and preloader from my post?
viktorsaari said:
did you try the scatter and preloader from my post?
Click to expand...
Click to collapse
yes both and in different ports of the PC (windows10)
the error you have described is only the wrong scatter and preloader file. its only a matter of finding the correct one. I also found the scatter that worked from a different firmware(the firmware didnt work but only the scatter did) , and installed different firmware. It might be possible for you to extract original scatter from the device using MTK droid tools.
lmmerono said:
yes both and in different ports of the PC (windows10)
Click to expand...
Click to collapse
viktorsaari said:
the error you have described is only the wrong scatter and preloader file. its only a matter of finding the correct one. I also found the scatter that worked from a different firmware(the firmware didnt work but only the scatter did) , and installed different firmware. It might be possible for you to extract original scatter from the device using MTK droid tools.
Click to expand...
Click to collapse
Thanks, I found about 20 scatter files between AC8227_Android_scatter and MT3367_Android_scatter, I have about 10 preloader_8227l_demo_ (Preloader) and another 15 different SP_Flash_Too.
I will have to arm myself with patience and try different combinations (so far I have tried more than 50 with the same result, the always present ERROR (4032).
We'll see if I get it or give up before, the ideal is that somewhere the files were found together and that they were already successfully tested but that would be daydreaming.:crying:
Another possible solution would be to enter the way that I would recognize a USB Flash drive with an XYAUTOUPG file or whatever I had tried with it but since this brick after pressing the reset it still does not know.
wow, I'm impressed by your patience
I also downloaded many files from the Russian forum. One of the problems I faced is if the folder name contains some Russian characters, the flashtool gives similar errors. Also some suggested, removing first 4 lines from the scatter file helps in some cases.
I remember I also had disappointments first. Many times I packed everything up and put in storage, but then brought it back for further testing. and one day I got lucky. Hopefully you too will fix it soon.
lmmerono said:
Thanks, I found about 20 scatter files between AC8227_Android_scatter and MT3367_Android_scatter, I have about 10 preloader_8227l_demo_ (Preloader) and another 15 different SP_Flash_Too.
I will have to arm myself with patience and try different combinations (so far I have tried more than 50 with the same result, the always present ERROR (4032).
We'll see if I get it or give up before, the ideal is that somewhere the files were found together and that they were already successfully tested but that would be daydreaming.:crying:
Another possible solution would be to enter the way that I would recognize a USB Flash drive with an XYAUTOUPG file or whatever I had tried with it but since this brick after pressing the reset it still does not know.
Click to expand...
Click to collapse
viktorsaari said:
wow, I'm impressed by your patience
I also downloaded many files from the Russian forum. One of the problems I faced is if the folder name contains some Russian characters, the flashtool gives similar errors. Also some suggested, removing first 4 lines from the scatter file helps in some cases.
I remember I also had disappointments first. Many times I packed everything up and put in storage, but then brought it back for further testing. and one day I got lucky. Hopefully you too will fix it soon.
Click to expand...
Click to collapse
Thanks for your help but I don't get results on the other hand, the test point disappeared from using it so much, it was deleted and since the processor does not have the pins in the air it can no longer even be tried.
I do not know if there is another test point or one that could help for the purpose that is sought and is: to start this brick.
On the main board, from where there would be a SIM socket, there is a connector that could appear to be a USB socket to be used by the Technical Service in the commissioning of the newly assembled ones.
Anyway, I just want to be able to recover my radio.
Thanks for your help.
Hello my friend I hope you upload the file again, YT9216B_00002_v004_20190530 * Thank
viktorsaari said:
I believe this (Link) is the version you are looking for. Its a memory dump. If you need help flashing it, follow the instruction here. Error 4032 means you are not using correct scatter file. and 5054 means there is not correct preloader file to go with the scatter. You can try the one I have shared, or copy the 2 files from other similar firmwares offered at 4pda
I hope it helps.
Click to expand...
Click to collapse
Hello my friend
I hope you upload the file again,
YT9216B_00002_v004_20190530
* Thank you
imr088888 said:
Hello my friend
I hope you upload the file again,
YT9216B_00002_v004_20190530
* Thank you
Click to expand...
Click to collapse
Not exactly the same date but this will work. Just a newer update with root and TWRP
Firmware YT9216B_00002_V004_20190826 (UI1) ROOT, TWRP, translation. (1/16)
https://drive.google.com/file/d/132kkj5neExIr9UufZIgAqeEu67JSVtu3/view
Hi my friend, I could not update, I put the update in usb and the update did not show me, is there a certain way to install?
Hi there I exausted the whole xda and russian forum for something that can work..
exausted different forums.... and tryd a lot of firmware and methods...
I did about the same I am afraid.... no backup and now black screen on startup and no connection to usb no more......
yesterday it still connected to my laptop....you could hear it connect in windows but i couldnt get anything to load on it... all sorts of errors in Flash tool....
eventually i I Did manage to download the preloader onto ny headunit from firmware I found in this post....
I found out that I had to use this order: I would connect my usb... click download in Flashtool then it starts... and I switch on the power of my head unit.... and it completed the upload of the preloader..... So i finally thought Yessssss now install the rest of the firmware.... but after this I had no connection with my head unit... it doesnt find it anymore trough USB.....
but after that I installed that preloader file... I can no longer get any connection no more to my hu....
please help me out.... I also did read some stuff that you need to connect or push 3 spots togheter on youre pcb...?? does anyone got more information or a clear foto of wich and how I connect these 3 spots?
Or maybe now a way I can unbrick my device or have correct software for me??
Ive been trying to fix it 4 3 days in a row now... but I am about to go insane
System information I found in factory settings when the unit was still stock and untouched:
YT9216B_00002_V004_20190708
kenel: 3.18.22
Flash:16G
CPU:A7 1.3 GHz x 4
Display 1024 * 600
MCU1: HW8227L-3.3-SW0-3.1
Inide when i open it op the sticker on the connectors on the pcb tells me:
YT9216B Vo.1 16C
A.005-YT9216B004
20200214
And here is the information of the store i bought it from in the original advertisement:
Specifications on website:
● System:Andriod 8.1
● Model:SU 9701
● Radio Chip:QN8035
● Software:8227L
● Type:Android navigation MP5
● Size:7 Inch
● Bluetooth:Bluetooth 4.0
● Resolution:1024*600
● Audio Amplifier:TDA7388
● Voltage:12V
● Power Output:60W
● Memory:1G+16G
● Audio format:MP3/WMA/WA/OGG/FLAC/APE
● Video format:RM/RMVB/MP4/FLV/MKV/3GP/AVIASF/SWFMP1
● Image foramt:JPG
● FM Range:FM 87.5~108MHz
● Operating temperature:-10℃ ~ +60℃
● USB Interface:USB 2.0
● Product Size:188mm*58mm*165mm
● Weight:1922g
● Button: Physical button/Reset button
● Factory password:1111
My apologies for my bad English (not my native language).
Hope you guys can help me unroot it...
martinique78 said:
Not exactly the same date but this will work. Just a newer update with root and TWRP
Firmware YT9216B_00002_V004_20190826 (UI1) ROOT, TWRP, translation. (1/16)
https://drive.google.com/file/d/132kkj5neExIr9UufZIgAqeEu67JSVtu3/view
Click to expand...
Click to collapse
I have this radio version and I can't update it. I tried USB update with a flash pen USB and gave me an error. I tried with SP flash and gave me error 4032 with the test points method... I don't know what can I do more.
DFC said:
I have this radio version and I can't update it. I tried USB update with a flash pen USB and gave me an error. I tried with SP flash and gave me error 4032 with the test points method... I don't know what can I do more.
Click to expand...
Click to collapse
I gave up on this junk radio a while ago...worked for a few days then it just went blank and got really hot so i pulled it out. Now it sits in a box in pieces.
My radio looks like a PODOFO, It's a YT9216B_00002_v004_20190826 firmware but aida64 show yt9218B.
I tried some methods, nothing worked. I tried to update via Android update, flash with USB with SP flash, flash with USB pen and sd card, without success .I decided to try again. Can someone help me, and on first place tell me what is the correct firmware for this device? And a full tutorial step by step (without shortcuts)? or some tip that can help me?
yt9216b
hello can you help me please me send new rom
thank you
YT9216B?
morio005 said:
hello can you help me please me send new rom
thank you
Click to expand...
Click to collapse
Hi, I wanted to know if this version of the radio was updated? Thank you
Renstaman said:
Hi there I exausted the whole xda and russian forum for something that can work..
exausted different forums.... and tryd a lot of firmware and methods...
I did about the same I am afraid.... no backup and now black screen on startup and no connection to usb no more......
yesterday it still connected to my laptop....you could hear it connect in windows but i couldnt get anything to load on it... all sorts of errors in Flash tool....
eventually i I Did manage to download the preloader onto ny headunit from firmware I found in this post....
I found out that I had to use this order: I would connect my usb... click download in Flashtool then it starts... and I switch on the power of my head unit.... and it completed the upload of the preloader..... So i finally thought Yessssss now install the rest of the firmware.... but after this I had no connection with my head unit... it doesnt find it anymore trough USB.....
but after that I installed that preloader file... I can no longer get any connection no more to my hu....
please help me out.... I also did read some stuff that you need to connect or push 3 spots togheter on youre pcb...?? does anyone got more information or a clear foto of wich and how I connect these 3 spots?
Or maybe now a way I can unbrick my device or have correct software for me??
Ive been trying to fix it 4 3 days in a row now... but I am about to go insane
System information I found in factory settings when the unit was still stock and untouched:
YT9216B_00002_V004_20190708
kenel: 3.18.22
Flash:16G
CPU:A7 1.3 GHz x 4
Display 1024 * 600
MCU1: HW8227L-3.3-SW0-3.1
Inide when i open it op the sticker on the connectors on the pcb tells me:
YT9216B Vo.1 16C
A.005-YT9216B004
20200214
And here is the information of the store i bought it from in the original advertisement:
Specifications on website:
● System:Andriod 8.1
● Model:SU 9701
● Radio Chip:QN8035
● Software:8227L
● Type:Android navigation MP5
● Size:7 Inch
● Bluetooth:Bluetooth 4.0
● Resolution:1024*600
● Audio Amplifier:TDA7388
● Voltage:12V
● Power Output:60W
● Memory:1G+16G
● Audio format:MP3/WMA/WA/OGG/FLAC/APE
● Video format:RM/RMVB/MP4/FLV/MKV/3GP/AVIASF/SWFMP1
● Image foramt:JPG
● FM Range:FM 87.5~108MHz
● Operating temperature:-10℃ ~ +60℃
● USB Interface:USB 2.0
● Product Size:188mm*58mm*165mm
● Weight:1922g
● Button: Physical button/Reset button
● Factory password:1111
My apologies for my bad English (not my native language).
Hope you guys can help me unroot it...
Click to expand...
Click to collapse
Hello, Did you solve issue?
I'm facing same issue. My android radio is the same of yours.
I have a dz09 smartwatch, I have been trying to backup the current firmware with the flashtool's readback but it always seems to fail, probably because I don't have the correct scatter file, so if anyone happens to have a file that works for my watch, I would greatly appreciate it, thanks.
version info:
[VERSION]:X9MB_1.1_CST716B_RQ_WB_DZ09_41_7789_9307_6153_612 3_J_B_V1.0.0[BRANCH]:11BW1308MP V15D_CSN
I also can't get a memory test to work, not sure why.