I got a smartwatch from a friend, they said they bought it at walmart. Someone posted a code to type into the dialer, and i got this info from it
LD991A_BSC_A1_LX7789_9304_CAM3A01_LANGA_V2.2
[BRANCH]:
11CW1352MP
MTK61D_BTDIALER_11C
BUILD:BUILD_NO
SERIAL#:
[BUILD TIME]
2016/11/08 12:15
[MRE VERSION] - 266923472
HAL_VERNO:
also, how would i go about getting the IMEI for this thing? do i need to put some sim card in it before it will give me that? I'd like to do.. whatever i can to this thing, most specificially though, change the watch faces. It has a computerized analog clock, i'd rather it show some sort of nifty digital..
Edit : it was *#8375# that showed that info
Look at this: https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Be careful to take a full recovery dump before anything else !!!
What model is it?
defdefred said:
Look at this: https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Be careful to take a full recovery dump before anything else !!!
What model is it?
Click to expand...
Click to collapse
That's the thing, with it being chinese with english language. I'm not completely sure. The info there says it's "A1", and it matches the watches called that, on youtube. So, i guess?
Eve_brea said:
That's the thing, with it being chinese with english language. I'm not completely sure. The info there says it's "A1", and it matches the watches called that, on youtube. So, i guess?
Click to expand...
Click to collapse
If it's a "A1" clone I'm very interesting by your firmware !!!
I trashed mine stupidly before having the full dump completed and now I'm stuck with another ROM that cause my screen/touch screen to be inverted!
You need to install the MTK usb drivers under micro$oft windows + the flash tool https://drive.google.com/file/d/0B_hRh3DjuBoeeUk3azBBU0ZvSXc/view?usp=sharing
The first thing to do is a "readback" backup => you will get a 4MB dump of the firmware. Keep it safe!
If you want to try the "test ram" feature, be careful to suppress the NOR test (because it will destroy your firmware) .
You can use the config file from https://drive.google.com/drive/folders/0B_hRh3DjuBoeZktTVXJrWms1U1k to feed the flashtool, but dont "download" neither "format", it will destroy your firmware!
defdefred said:
If it's a "A1" clone I'm very interesting by your firmware !!!
I trashed mine stupidly before having the full dump completed and now I'm stuck with another ROM that cause my screen/touch screen to be inverted!
You need to install the MTK usb drivers under micro$oft windows + the flash tool https://drive.google.com/file/d/0B_hRh3DjuBoeeUk3azBBU0ZvSXc/view?usp=sharing
The first thing to do is a "readback" backup => you will get a 4MB dump of the firmware. Keep it safe!
If you want to try the "test ram" feature, be careful to suppress the NOR test (because it will destroy your firmware) .
You can use the config file from https://drive.google.com/drive/folders/0B_hRh3DjuBoeZktTVXJrWms1U1k to feed the flashtool, but dont "download" neither "format", it will destroy your firmware!
Click to expand...
Click to collapse
Well, if i can pull out a copy of the files, i don't mind sharing them. However I'm not going to do it if there's nothing useful to me. Are there files to. do anything to my watch? Can i change the faces as i want? Add other apps? Unlock the device? It has a sim card slot, i ordered a card from the free company "freedompop" i plan to try in it, but i'm not sure how it's going to go.
Concerning watch faces, is it easly, thanks to Golem, for MT6260 models => https://forum.xda-developers.com/smartwatch/other-smartwatches/watch-vxp-files-t3437311
But it is still ongoing / difficult /maybe impossible for MT6261 models with 4MB ROM / 32 MB RAM.
What is your models (check with the Flashtool / RAM test and don't forget to uncheck the box for the NOR test) ?
One you have a correct backup, you may try other firmware (with other faces) => https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
Notice that only few will work due to hardware variety of clones.
defdefred said:
If it's a "A1" clone I'm very interesting by your firmware !!!
I trashed mine stupidly before having the full dump completed and now I'm stuck with another ROM that cause my screen/touch screen to be inverted!
You need to install the MTK usb drivers under micro$oft windows + the flash tool
The first thing to do is a "readback" backup => you will get a 4MB dump of the firmware. Keep it safe!
If you want to try the "test ram" feature, be careful to suppress the NOR test (because it will destroy your firmware) .
Click to expand...
Click to collapse
I used *#8375# on the one I just got and came up with the exact match to what OP posted.
Managed to get a Readback on the Rom and formed a back up with the flashtool.
Posted to my google drive if you can download and look at it:
/ file/ d/0ByCO5YTrx3QBWWRqRTJyQVFub3M/ view?usp=sharing
Hope this helps since you were interested. If I need to do something else done to it please let me know username at gmail...
I used to upgrade the ROM of my rooted galaxy s8 (SM-G9500) with smart switch's emergency reset feature (because it refused to upgrade my phone with the normal method and prompted that there's no enough space on phone). However, samsung recently completely disabled that feature in the software (even with the older version of smart switch). Now I have no choice but to use odin to flash the firmware directly in download mode.
After some digging, I noticed that if I enabled 'Latest Software Pre-Download' in smart switch's Preferences, it will download a large rom file in 'C:\Users\USERNAME\AppData\Local\Temp\Binary\SM-G9500\VERSION_CODE' folder. As an instance, the rom file is 'C:\Users\L\AppData\Local\Temp\Binary\SM-G9500\G9500ZCU2AQL2...\hpvrymp2qa' for now. As usual while upgrading a non-rooted phone, the file will be extracted to a folder like 'hpvrymp2qa.zipfolder' after being downloaded, it includes AP, BL, CP, CSC and HOME_CSC 5 files, which can be flashed with odin. But now the pre-downloaded rom won't be extracted.
I tried to open it with 7zip to get the flash-able files, but failed. Also tried to use the 'file' command in linux, it only simply said its type is 'data'.
So what is its exact type, and how can I open/flash it? Thanks in advance.
PS: maybe i can also download the rom from 3rd-party websites, but i haven't found a good source yet. most of them need you to pay for the service, or have a very slow speed. on the other hand, smart switch can download in maximum speed, that's why i wanted to use it.
PS2: sorry for my bad english
xdauser'17 said:
I used to upgrade the ROM of my rooted galaxy s8 (SM-G9500) with smart switch's emergency reset feature (because it refused to upgrade my phone with the normal method and prompted that there's no enough space on phone). However, samsung recently completely disabled that feature in the software (even with the older version of smart switch). Now I have no choice but to use odin to flash the firmware directly in download mode.
After some digging, I noticed that if I enabled 'Latest Software Pre-Download' in smart switch's Preferences, it will download a large rom file in 'C:\UsersUSERNAME\AppData\Local\Temp\Binary\SM-G9500VERSION_CODE' folder. As an instance, the rom file is 'C:\Users\L\AppData\Local\Temp\Binary\SM-G9500\G9500ZCU2AQL2...\hpvrymp2qa' for now. As usual while upgrading a non-rooted phone, the file will be extracted to a folder like 'hpvrymp2qa.zipfolder' after being downloaded, it includes AP, BL, CP, CSC and HOME_CSC 5 files, which can be flashed with odin. But now the pre-downloaded rom won't be extracted.
I tried to open it with 7zip to get the flash-able files, but failed. Also tried to use the 'file' command in linux, it only simply said its type is 'data'.
So what is its exact type, and how can I open/flash it? Thanks in advance.
PS: maybe i can also download the rom from 3rd-party websites, but i haven't found a good source yet. most of them need you to pay for the service, or have a very slow speed. on the other hand, smart switch can download in maximum speed, that's why i wanted to use it.
PS2: sorry for my bad english
Click to expand...
Click to collapse
http://fw.updato.com
Use a download accelerator and get like 3+mb/s and pull roms down in 20m like a boss ?
partcyborg said:
http://fw.updato.com
Use a download accelerator and get like 3+mb/s and pull roms down in 20m like a boss
Click to expand...
Click to collapse
Thank you for the info. Just gave it a try, it's really fast! So I can download upgrades there next time.
BTW, this thread will be kept, because I'm still interested at that strange file.
Ive been combing forum posts and links for days now trying to figure out what version of the dz09 I have. I've tried every scatter file and rom I could get my hands on and everything gives me a "s_brom_download_epp_fail (2036)" error. FlashTool wont let me do a memory test and I'm not quite sure how to do a backup at least i dont think i can do one without a valid scatter file.
Scatter_for_16_32_64_128MB_MT62xx_by_dfgigger_for_4PDA (scatter_for_backup&format_created_by_dfgigger) wich appears to be a universal scatter file didnt work for me either. I'm stumped.
Maui Meta says this;
[Version]
BaseBand chip version=MT6260
ECO version=
DSP firmware version=2000.00.00
DSP patch version=1.0
Software version=X9A_LSSD_JL_GX7789_4LIN1_EU_ARABIC_2W_SP0821_0509
Hardware version=X9_11B_HW
Melody version=Unknown
Can someone please point me in the right direction on what else I can try?
I have same problem. Could anyone help us?
xalach said:
I have same problem. Could anyone help us?
Click to expand...
Click to collapse
here is a downloadlink for the same firmware dump
maybe helps
http://4pda.ru/forum/lofiversion/index.php?t713552-2560.html
I can't download from this site. All files are not available.
Hello I need help, by mistake I flashed SP_Flash_Tool a version that in the end was incompatible with my AC8227 YT9216B with what remained brick.
I am trying to recover it with versions that download YT9217 and YT9218 but it is known that they are very different from the version that I had the YT9216B_00002_v004_20190530 and by means of USB bridging the test point close to negative but even though the program SP_Flash_Tool- 5.1916 always ends with failure 4032 or 5054 both related to the DMRAM.
There would be someone in the forum that could help me indicating where to find the link to download my ROM? I have already reviewed the month of 400 pages of the 4PDA forum and I did not find it.
I believe this (Link) is the version you are looking for. Its a memory dump. If you need help flashing it, follow the instruction here. Error 4032 means you are not using correct scatter file. and 5054 means there is not correct preloader file to go with the scatter. You can try the one I have shared, or copy the 2 files from other similar firmwares offered at 4pda
I hope it helps.
lmmerono said:
Hello I need help, by mistake I flashed SP_Flash_Tool a version that in the end was incompatible with my AC8227 YT9216B with what remained brick.
I am trying to recover it with versions that download YT9217 and YT9218 but it is known that they are very different from the version that I had the YT9216B_00002_v004_20190530 and by means of USB bridging the test point close to negative but even though the program SP_Flash_Tool- 5.1916 always ends with failure 4032 or 5054 both related to the DMRAM.
There would be someone in the forum that could help me indicating where to find the link to download my ROM? I have already reviewed the month of 400 pages of the 4PDA forum and I did not find it.
Click to expand...
Click to collapse
viktorsaari said:
I believe this (Link) is the version you are looking for. Its a memory dump. If you need help flashing it, follow the instruction here. Error 4032 means you are not using correct scatter file. and 5054 means there is not correct preloader file to go with the scatter. You can try the one I have shared, or copy the 2 files from other similar firmwares offered at 4pda
I hope it helps.
Click to expand...
Click to collapse
Thank you very much for your help, I will try it immediately to see if with a little luck and your copy of the firmware convinces my computer and starts once and for all, although I do not have too much hope, but anyway, we will try achieve.:good
Nothing, still the same, error 4032 put it as you put it.
Connected to a 12V source the screen starts in a blue color and there is no change unless the reset button is pressed, I don't know if that can indicate any other fault such as that the MCU memory had been erased or corrupted and that is why he does not stop doing anything but the question is that following the procedure for the use of the "test point" step by step always cindependently of using a flash tool or another, of using different scatter files or firm YT9216 / 17/18, B, Whatever the question is, always, always the blissful error 4032 above all.
I don't know what to do, any suggestion is accepted even if it is to use a hammer as a tool.
did you try the scatter and preloader from my post?
viktorsaari said:
did you try the scatter and preloader from my post?
Click to expand...
Click to collapse
yes both and in different ports of the PC (windows10)
the error you have described is only the wrong scatter and preloader file. its only a matter of finding the correct one. I also found the scatter that worked from a different firmware(the firmware didnt work but only the scatter did) , and installed different firmware. It might be possible for you to extract original scatter from the device using MTK droid tools.
lmmerono said:
yes both and in different ports of the PC (windows10)
Click to expand...
Click to collapse
viktorsaari said:
the error you have described is only the wrong scatter and preloader file. its only a matter of finding the correct one. I also found the scatter that worked from a different firmware(the firmware didnt work but only the scatter did) , and installed different firmware. It might be possible for you to extract original scatter from the device using MTK droid tools.
Click to expand...
Click to collapse
Thanks, I found about 20 scatter files between AC8227_Android_scatter and MT3367_Android_scatter, I have about 10 preloader_8227l_demo_ (Preloader) and another 15 different SP_Flash_Too.
I will have to arm myself with patience and try different combinations (so far I have tried more than 50 with the same result, the always present ERROR (4032).
We'll see if I get it or give up before, the ideal is that somewhere the files were found together and that they were already successfully tested but that would be daydreaming.:crying:
Another possible solution would be to enter the way that I would recognize a USB Flash drive with an XYAUTOUPG file or whatever I had tried with it but since this brick after pressing the reset it still does not know.
wow, I'm impressed by your patience
I also downloaded many files from the Russian forum. One of the problems I faced is if the folder name contains some Russian characters, the flashtool gives similar errors. Also some suggested, removing first 4 lines from the scatter file helps in some cases.
I remember I also had disappointments first. Many times I packed everything up and put in storage, but then brought it back for further testing. and one day I got lucky. Hopefully you too will fix it soon.
lmmerono said:
Thanks, I found about 20 scatter files between AC8227_Android_scatter and MT3367_Android_scatter, I have about 10 preloader_8227l_demo_ (Preloader) and another 15 different SP_Flash_Too.
I will have to arm myself with patience and try different combinations (so far I have tried more than 50 with the same result, the always present ERROR (4032).
We'll see if I get it or give up before, the ideal is that somewhere the files were found together and that they were already successfully tested but that would be daydreaming.:crying:
Another possible solution would be to enter the way that I would recognize a USB Flash drive with an XYAUTOUPG file or whatever I had tried with it but since this brick after pressing the reset it still does not know.
Click to expand...
Click to collapse
viktorsaari said:
wow, I'm impressed by your patience
I also downloaded many files from the Russian forum. One of the problems I faced is if the folder name contains some Russian characters, the flashtool gives similar errors. Also some suggested, removing first 4 lines from the scatter file helps in some cases.
I remember I also had disappointments first. Many times I packed everything up and put in storage, but then brought it back for further testing. and one day I got lucky. Hopefully you too will fix it soon.
Click to expand...
Click to collapse
Thanks for your help but I don't get results on the other hand, the test point disappeared from using it so much, it was deleted and since the processor does not have the pins in the air it can no longer even be tried.
I do not know if there is another test point or one that could help for the purpose that is sought and is: to start this brick.
On the main board, from where there would be a SIM socket, there is a connector that could appear to be a USB socket to be used by the Technical Service in the commissioning of the newly assembled ones.
Anyway, I just want to be able to recover my radio.
Thanks for your help.
Hello my friend I hope you upload the file again, YT9216B_00002_v004_20190530 * Thank
viktorsaari said:
I believe this (Link) is the version you are looking for. Its a memory dump. If you need help flashing it, follow the instruction here. Error 4032 means you are not using correct scatter file. and 5054 means there is not correct preloader file to go with the scatter. You can try the one I have shared, or copy the 2 files from other similar firmwares offered at 4pda
I hope it helps.
Click to expand...
Click to collapse
Hello my friend
I hope you upload the file again,
YT9216B_00002_v004_20190530
* Thank you
imr088888 said:
Hello my friend
I hope you upload the file again,
YT9216B_00002_v004_20190530
* Thank you
Click to expand...
Click to collapse
Not exactly the same date but this will work. Just a newer update with root and TWRP
Firmware YT9216B_00002_V004_20190826 (UI1) ROOT, TWRP, translation. (1/16)
https://drive.google.com/file/d/132kkj5neExIr9UufZIgAqeEu67JSVtu3/view
Hi my friend, I could not update, I put the update in usb and the update did not show me, is there a certain way to install?
Hi there I exausted the whole xda and russian forum for something that can work..
exausted different forums.... and tryd a lot of firmware and methods...
I did about the same I am afraid.... no backup and now black screen on startup and no connection to usb no more......
yesterday it still connected to my laptop....you could hear it connect in windows but i couldnt get anything to load on it... all sorts of errors in Flash tool....
eventually i I Did manage to download the preloader onto ny headunit from firmware I found in this post....
I found out that I had to use this order: I would connect my usb... click download in Flashtool then it starts... and I switch on the power of my head unit.... and it completed the upload of the preloader..... So i finally thought Yessssss now install the rest of the firmware.... but after this I had no connection with my head unit... it doesnt find it anymore trough USB.....
but after that I installed that preloader file... I can no longer get any connection no more to my hu....
please help me out.... I also did read some stuff that you need to connect or push 3 spots togheter on youre pcb...?? does anyone got more information or a clear foto of wich and how I connect these 3 spots?
Or maybe now a way I can unbrick my device or have correct software for me??
Ive been trying to fix it 4 3 days in a row now... but I am about to go insane
System information I found in factory settings when the unit was still stock and untouched:
YT9216B_00002_V004_20190708
kenel: 3.18.22
Flash:16G
CPU:A7 1.3 GHz x 4
Display 1024 * 600
MCU1: HW8227L-3.3-SW0-3.1
Inide when i open it op the sticker on the connectors on the pcb tells me:
YT9216B Vo.1 16C
A.005-YT9216B004
20200214
And here is the information of the store i bought it from in the original advertisement:
Specifications on website:
● System:Andriod 8.1
● Model:SU 9701
● Radio Chip:QN8035
● Software:8227L
● Type:Android navigation MP5
● Size:7 Inch
● Bluetooth:Bluetooth 4.0
● Resolution:1024*600
● Audio Amplifier:TDA7388
● Voltage:12V
● Power Output:60W
● Memory:1G+16G
● Audio format:MP3/WMA/WA/OGG/FLAC/APE
● Video format:RM/RMVB/MP4/FLV/MKV/3GP/AVIASF/SWFMP1
● Image foramt:JPG
● FM Range:FM 87.5~108MHz
● Operating temperature:-10℃ ~ +60℃
● USB Interface:USB 2.0
● Product Size:188mm*58mm*165mm
● Weight:1922g
● Button: Physical button/Reset button
● Factory password:1111
My apologies for my bad English (not my native language).
Hope you guys can help me unroot it...
martinique78 said:
Not exactly the same date but this will work. Just a newer update with root and TWRP
Firmware YT9216B_00002_V004_20190826 (UI1) ROOT, TWRP, translation. (1/16)
https://drive.google.com/file/d/132kkj5neExIr9UufZIgAqeEu67JSVtu3/view
Click to expand...
Click to collapse
I have this radio version and I can't update it. I tried USB update with a flash pen USB and gave me an error. I tried with SP flash and gave me error 4032 with the test points method... I don't know what can I do more.
DFC said:
I have this radio version and I can't update it. I tried USB update with a flash pen USB and gave me an error. I tried with SP flash and gave me error 4032 with the test points method... I don't know what can I do more.
Click to expand...
Click to collapse
I gave up on this junk radio a while ago...worked for a few days then it just went blank and got really hot so i pulled it out. Now it sits in a box in pieces.
My radio looks like a PODOFO, It's a YT9216B_00002_v004_20190826 firmware but aida64 show yt9218B.
I tried some methods, nothing worked. I tried to update via Android update, flash with USB with SP flash, flash with USB pen and sd card, without success .I decided to try again. Can someone help me, and on first place tell me what is the correct firmware for this device? And a full tutorial step by step (without shortcuts)? or some tip that can help me?
yt9216b
hello can you help me please me send new rom
thank you
YT9216B?
morio005 said:
hello can you help me please me send new rom
thank you
Click to expand...
Click to collapse
Hi, I wanted to know if this version of the radio was updated? Thank you
Renstaman said:
Hi there I exausted the whole xda and russian forum for something that can work..
exausted different forums.... and tryd a lot of firmware and methods...
I did about the same I am afraid.... no backup and now black screen on startup and no connection to usb no more......
yesterday it still connected to my laptop....you could hear it connect in windows but i couldnt get anything to load on it... all sorts of errors in Flash tool....
eventually i I Did manage to download the preloader onto ny headunit from firmware I found in this post....
I found out that I had to use this order: I would connect my usb... click download in Flashtool then it starts... and I switch on the power of my head unit.... and it completed the upload of the preloader..... So i finally thought Yessssss now install the rest of the firmware.... but after this I had no connection with my head unit... it doesnt find it anymore trough USB.....
but after that I installed that preloader file... I can no longer get any connection no more to my hu....
please help me out.... I also did read some stuff that you need to connect or push 3 spots togheter on youre pcb...?? does anyone got more information or a clear foto of wich and how I connect these 3 spots?
Or maybe now a way I can unbrick my device or have correct software for me??
Ive been trying to fix it 4 3 days in a row now... but I am about to go insane
System information I found in factory settings when the unit was still stock and untouched:
YT9216B_00002_V004_20190708
kenel: 3.18.22
Flash:16G
CPU:A7 1.3 GHz x 4
Display 1024 * 600
MCU1: HW8227L-3.3-SW0-3.1
Inide when i open it op the sticker on the connectors on the pcb tells me:
YT9216B Vo.1 16C
A.005-YT9216B004
20200214
And here is the information of the store i bought it from in the original advertisement:
Specifications on website:
● System:Andriod 8.1
● Model:SU 9701
● Radio Chip:QN8035
● Software:8227L
● Type:Android navigation MP5
● Size:7 Inch
● Bluetooth:Bluetooth 4.0
● Resolution:1024*600
● Audio Amplifier:TDA7388
● Voltage:12V
● Power Output:60W
● Memory:1G+16G
● Audio format:MP3/WMA/WA/OGG/FLAC/APE
● Video format:RM/RMVB/MP4/FLV/MKV/3GP/AVIASF/SWFMP1
● Image foramt:JPG
● FM Range:FM 87.5~108MHz
● Operating temperature:-10℃ ~ +60℃
● USB Interface:USB 2.0
● Product Size:188mm*58mm*165mm
● Weight:1922g
● Button: Physical button/Reset button
● Factory password:1111
My apologies for my bad English (not my native language).
Hope you guys can help me unroot it...
Click to expand...
Click to collapse
Hello, Did you solve issue?
I'm facing same issue. My android radio is the same of yours.
Hi all,
I've just got my hand on a DZ09 smartwatch. I was trying to follow Gizmo Advices' tutorial (https://www.gizmoadvices.com/create-read-back-rom-dump-dz09/) to do a ROM backup to change the watch faces, yet every time at the readback part I got an error S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095) at the FlashTool. After researchng a bit, I found out that the most probable cause is an unadequate scatter file. Unfortunately, I couldn't find any usable information for my firmware, which is X9_1.0_COBSLW_RQ_LZ_DZ09_JXD7789_9308_9307_SL3029_6133_6123_LAN_A_V1.5.1 .
Any help is much appreciated!
Cheers,
David
you need to have the scatter file the same as the firmware of the smartwatch because that error means that the scatter file does not match the firmware you have on the smartwatch
follow these steps
1 Dial *#8375#
2 Send a photo of what appears so that I can provide you with a scatter compatible with your DZ09