I have a moto e4, so I have SO issues so I have been trying to use the save to repair but the pc does not recognize the phone, the problem phone does not recognize that it is connected to a pc, I tried several computers with different cables and nothing, the pc does not recognize it in fast boot mode nor does the android sdk
Related
I have now my X2, generic_SG. It gets into bootloader moder easy but then it is not recognized my the pc or SEUS.
When I got it, and during drivers where installed upon connection the usb, it was recognized. But now, no more. So I cannot use the SEUS service even though its in bootloader mode!
I only read about people not able to get into bootloader mode, but in my case, very strange. Any help?
I had the same problem.I just change the usb cable and put in directly to pc and now is everthing ok.
What do you mean 'direct in pc'? One had to plug it always in the pc !?!
And I am using the SE provided cable. Perhaps I will try a different one but I don't think its the cable as it work fine sync'in with pc. Just in bootloader mode its a no go.
Tried today with another computer. Both have Win7 Ultimate.
Also tried 'another' cable / cables but same issue remains!
I know there are a million threads out there on bricking and odin and download mode and I have gone through almost all of them in the past 2 hours but I havent been able to find the solution to my problem.
I was odining back from trigger redux to JFD when the phone got stuck at flashing factoryfs.rfs. I hadnt checked repartition before flashing. After 20 mins of being stuck i disconnected the phone from my laptop and rebooted it.
It booted up to the pc and phone download mode screen. Since then my laptop running windows 7 64 bit is unable to recognize it. I have uninstalled and reinstalled the drivers and restarted the machine a couple of times.
I have done multiple battery pulls to try to recognize the phone on windows and tried all 4 USB ports but it wont be recognized at all. As soon as I connect the phone to the laptop, it boots up to the pc and phone screen which means the phone can detect the pc but the pc cant detect the phone.
I've tried using the original samsung micro usb cable as well as a nokia micro usb cable which i usually use for charging the phone.
Any help will be greatly appreciated. I do not have access to other windows machines at the moment.
i just noticed that if i pull the battery while the phone is connected to the laptop, the phone and pc download screen stays on.
Hello everybody,
last friday I plugged in my Galaxy S4 (i9500, rooted) with my usb cable to my PC, everything was fine. I shut off my computer, went on a holiday for weekend, used the cable with my laptop and my friends' laptops everything was fine. Now I came back home, opened my PC, plugged in my phone, it only charges! I cannot access to my files and stuff via neither My Computer or Kies. It only charges.
My computer uses Windows 7 x64, everything up to date, tried to uninstall Kies, Samsung USB driver, none worked. I tried using diffrent cables, usb ports too. Diffrent computers, no problem. My Pc, only charges
The thing is when I look into my pc's device manager it says "PCI Input Device". When I first plugged in today and it didn't worked it said "Android Composite ADB Interface"
Both had yellow exclamation mark on their symbols. I tried removing them, restarting pc and swiching users, none helped.
Any Ideas?
Thanks..
Problem solved
I removed all the drivers, put my device to download mode and plugged in, worked very well.....
Hi i have a nexus 7 (2012) everything was working fine until android 5. The device was slow and almost unusable. Then the 5.0.2 update came out and guess what? I updated it and now my laptop wont recognize the device so i tried a different cable and nothing. I plugged the nexus 7 in my second computer and nothing not even the sound that means you plugged something in the usb port. So i went to my brothers house and tried his computer.... the same... nothing. We plugged his nexus 7 (2012) 5.0.2 wich is the exact same device as mine and it works so we thought that it was the usb connector on the device and we switched my connector with his....NOTHING happens. computer wont recognize the device, no sound, no pop-up, no ADB detection. Does anyone have the same problem or a solution on how to downgrade 5.0.2 back to 4.4 without usb cable?
Thank you
Did you tried out to start n7 into fastboot mode and recovery mode?
Is usb not available also there?
fastboot and recovery mode also has no USB. absolutely nothing happens. when i connect the device it charges but the lightning icon does not appear on the battery in the status bar. and its not the usb port on the N7 i changed it.
?????????????????
Same here
I have the same Problem - a N7 GSM with 5.0.2 and no communication via USB.
I have tried different computers with Win7 and Ubuntu14.10. As well as differnt cables. (And all combinations of that work with my HTC M7, by the way)
Under Linux, not even lsusb shows the device, or dmesg shows any connection to a usb device.
To be completly honest, I did not give much love to my N7, I have been using it hardly. But when I did, I have been flashing some differnt Roms and testing different bootloaders so this might be some kind of my fault.
i updated to 5,1 and still the same problem so i assume its hardware related. but i know it is not the USB connector because i tried it on my brothers N7. and it works
Mine is quirky, comp recognizes it and can order boot but sideload and push to device don't work. Its odd.
Moto X Pure 1575 has no sign of life.
Lineage Rom on it 7.0 I believe.
Has super SU and recovery installed.
Phone shows black screen tried hitting the power and volume in as many different combinations as possible but no luck. The only response I get is when I plug it into the computer I hear the Windows noise and I get a message saying unknown USB device that may be broken. I do have a good working XT 1575 which is my daily driver. My computer recognizes my working XT 1575 and I do have all drivers and other essentials installed on my computer. Hoping that since my computer at least sees a USB device that there is some hope.
@DaveD63
https://forum.xda-developers.com/moto-x-style/help/please-read-how-try-to-fix-bricked-moto-t3740733
https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860
Download and Install Qulacomm Drivers from the internet.Then connect your phone , it should detect as Qualcomm-HS Qloader 9008 (or something like that) if your device is Hard bricked.
Follow the guide for solving hard bricked Moto X Style