I have an OW2 E1E0 and it fails to pair with Wear OS saying "couldn't update your watch". I am currently hard stuck in the setup and there doesn't seem to be any way to bypass it so that I can access the settings (so I can enable debugging for adb, etc).
Do you have the Chinese Wear OS app installed?
findnuser said:
Do you have the Chinese Wear OS app installed?
Click to expand...
Click to collapse
No, I am using the NA version. You think the Chinese version is required? I did try using the Chinese version of the HeyTap Health app (from scanning the QR code that appears on the watch), but that gets stuck loading after logging in.
Oppo Chinese watches never run wearOS in fact they run colorOS.
It's like the first Oppo watch in china it ran ColorOS however in western markets it ran wearOS.
It should work with with HeyTap but it would need to be the chinese version - what phone are you linking it too?
findnuser said:
Oppo Chinese watches never run wearOS in fact they run colorOS.
It's like the first Oppo watch in china it ran ColorOS however in western markets it ran wearOS.
It should work with with HeyTap but it would need to be the chinese version - what phone are you linking it too?
Click to expand...
Click to collapse
i just bought one from aliexpress the seller said the version is international but turn out to be china version now i'm stuck can't pair with my phone.
Related
Hello all,
few days ago I purchased a amazfit chinese version. The phone in my possession is an iPhone 6 Plus.
I downloaded from the Apple store the app Amazfit where I have managed without problem to activate the phone.
Unfortunately, however, I can't do the sync with Strava, there's no way. Tells me to log in on the Street asks me for authorization, and then if I agree I do not go out much.
What am I doing wrong ?
Thanks to all,
Vincenzo
vincenzo79 said:
The phone in my possession is an iPhone 6 Plus.
I downloaded from the Apple store the app Amazfit where I have managed without problem to activate the phone.
Click to expand...
Click to collapse
The trick on Android was to change from Chinese App to the Playstore version as the Chinese watch is not intended to be synched with Strava.
But i don't know how they do it on iOS.
One solution might be to flash the watch to US version and then pair it but i am not sure if that will work.
If they check serial number when pairing it will not work, if they check firmware version it will.
Beleriand said:
The trick on Android was to change from Chinese App to the Playstore version as the Chinese watch is not intended to be synched with Strava.
But i don't know how they do it on iOS.
One solution might be to flash the watch to US version and then pair it but i am not sure if that will work.
If they check serial number when pairing it will not work, if they check firmware version it will.
Click to expand...
Click to collapse
Hello
in the end I fixed it and the sync between Strava and the iPhone 6 Plus works without problems.
The initial problem I think it was Strava as it took a long time to sync. Now I can just go to run and log my activities on the Amazfit then when I get home to pair everything with the iPhone and then sync everything with Strava.
vincenzo79 said:
Hello
in the end I fixed it and the sync between Strava and the iPhone 6 Plus works without problems.
The initial problem I think it was Strava as it took a long time to sync. Now I can just go to run and log my activities on the Amazfit then when I get home to pair everything with the iPhone and then sync everything with Strava.
Click to expand...
Click to collapse
hi,
can you let me know in detail, how you processed?
THX
vincenzo79 said:
Hello
in the end I fixed it and the sync between Strava and the iPhone 6 Plus works without problems.
The initial problem I think it was Strava as it took a long time to sync. Now I can just go to run and log my activities on the Amazfit then when I get home to pair everything with the iPhone and then sync everything with Strava.
Click to expand...
Click to collapse
Do you have the chinese amazifit watch with PACEfied?
If so what Amazfit app do you have in your iPhone? In mine there is NO option for sync with Strava, don't know if my app is the chinese one...
So after months, is there any possibility now to use PACEfied with google play Amazfit version and sync with Strava? I can't scan the barcode (it says that I need cn version)
This might assist a few of you with the SM-G9550 who're in China (mainland)
This is just a post for noobs (like me) who inevitably pick this phone up while in mainland China and mistakenly realise that it comes with no google framework or playstore and need help. No need to flash HK firmware through ODIN and worry about the consequences. I simply went to my vpn provider (not needed if outside of china), and downloaded my vpn's apk from their site. Installed it without hassle.
Then went to a site called APKmirror, downloaded their suggested diagnostic app (Droid hardware app), which is found on the third last section of their FAQ page (as of this post's date). Then I searched in APKmirror's site for framework, google services, and the play store itself. found suitable ones and downloaded to my laptop. Then from my computer, plonked them onto the phone (had to use Airdroid as my macbook didn't connect to phone), and installed the services framework, then play services and lastly the play store apks. At least I think that's what I did ... Might have not even needed to put the play services on now that I think about it.
Hope this helps.
Cheers.
Google play services already preinstalled，we just need to have VPN to work.
surprisingly found inbuilt Radio which is missing in international version ?
I have only concern with GPS ! everything in Chinese ?
Sent from my SM-G9550 using XDA-Developers Legacy app
ran816 said:
Google play services already preinstalled，we just need to have VPN to work.
surprisingly found inbuilt Radio which is missing in international version
I have only concern with GPS ! everything in Chinese
Sent from my SM-G9550 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes I suppose so, as mine came with some sort of Google out of the box... But it was a neutered variety. Only let me download some Google apps from Samsung store. Couldn't get play store to work, or some other things working, and Google Chrome wouldn't allow log in. So... Not sure why yours allowed different access levels with just VPN.
I didn't look at GPS but noted Chinese in weather app.. I just changed my weather app to my preferred one and now have English weather. Samsung service app is Chinese, but... I don't really use it anyway.
Cheers.
The HK version also identifies as SM-G9550. I suppose there is something to work out between the two for you to get your Chinese version completely international
In my SM-G9550 Hongkong model, continuous Intra band Carrier Aggregation is not working for Band3 (1800MHz). I bought it from HK and using it in Cambodia
Google play service has already installed in phone,just download a Play store app and VPN
hoped this variant to be standard
Now that it is available in North America, will there be any rooting and modding? I saw a Youtube video claiming to root it an replace the OS with Android 9: https://www.youtube.com/watch?v=KHyIlcpWh8A
No interest at all?
It's a fake video bro
I jus installed whatsapp its not fake
International or Chinese model? How u installed?
What is the screen on time with always on display enabled?
Kuaybeatz said:
I jus installed whatsapp its not fake
Click to expand...
Click to collapse
How to install in nubia watch
Does anybody is having a problem to apply watch faces from the Nubia Smart Wear app? My phone is connected to the watch through Bluetooth and it's connected to the app, I tried to unpai and pair again, reset both, watch and phone, allow all permissions etc. And everytime I download the face watch offered on the app and click apply, it just stays there stuck, loading... and it never applies it to the watch, can you help me about what can I do? I have a Galaxy Note 10+(Up to date)
I am trying to use this with MicroG. It does not require a login, but it wants you to be in China. Anyone know of a way to trick the app into seeing you in China, or a VPN that will show you in China? If anyone has hacked the wear app to work in MicroG, please let me know.
You searched for wear os china - APKMirror
You searched for wear os china - APKMirror Free and safe Android APK downloads
www.apkmirror.com
Thanks
Do you got chinese Wear OS work outside China?
mario_isp said:
Do you got chinese Wear OS work outside China?
Click to expand...
Click to collapse
No, but you can use it to start the install of Wear on a MicroG device, then you finish up with the non Chinese version.
Take a look here https://forum.xda-developers.com/t/eureka-wear-works-on-microg.4260681/#post-85121893
After installed Color OS 12 on Oneplus 8 Pro i couldn't connect connect my Samsung Galaxy Watch 4 Classic to my phone... While trying to pair with wearable app says that "This watch isn't supported on this phone" using on Android Os11 seamlessly... What can i do able to solve this problem has no root on my device...
tomeytos said:
After installed Color OS 12 on Oneplus 8 Pro i couldn't connect connect my Samsung Galaxy Watch 4 Classic to my phone... While trying to pair with wearable app says that "This watch isn't supported on this phone" using on Android Os11 seamlessly... What can i do able to solve this problem has no root on my device...
Click to expand...
Click to collapse
Is there a reason why you are using ColorOS12 Instead of OxygenOS12?
Didnt hear anything about OxygenOS and Samsung watches but that does not mean it will work.
Same problem is valid for oxygen os 12 also :/
tomeytos said:
Same problem is valid for oxygen os 12 also :/
Click to expand...
Click to collapse
Did you try this guide?
Fix: Galaxy Watch 4 this watch isn't supported on this phone
Samsung Galaxy Watch 4 is the latest flagship smartwatch from Samsung that has been launched recently in the market. Smartwatch lovers and Samsung fans
www.getdroidtips.com
This is for Huawei devices specific content for it include...
Hello,
I have a Oneplus 10 Pro running ColorOS 12.1 and was running into this same issue. There isn't much information or tutorials when it comes to using these devices using the ColorOS as it seems as if it was meant for Chinese use only.
I was finally able to get my watch paired with my phone using the steps below.
1. Install the Samsung Health app from the play store
2. Download an old version of Galaxy wearable app and Galaxy watch4 plugin from apkmirror ( I used versions from December 2021)
3. Pair the watch using Samsung Health by opening the app. Click the 3 dot menu and go to settings>Accessories>Scan for accessories. Once paired it will automatically open the galaxy wear app.
4. Close the galaxy wear app and disable wifi and data on the phone.
5. Open the galaxy wear app again and proceed with the setup but decline all options that require you to sign on the watch with Samsung or Google and proceed by allowing the required permissions.
6. That's it, you should now be paired with your watch and you can now sign into your Samsung account through the wearable app and perform a backup/restore if you like,
Hope this helps anyone out there. This was a real pain in the but for me as I find ColorOS to be more reliable than the mess that OxygenOS is since it's now a fork of ColorOS.
My next task is to find out how to get the Google Backup to work. If anyone has any information on this please let me know.
biglo said:
Hello,
I have a Oneplus 10 Pro running ColorOS 12.1 and was running into this same issue. There isn't much information or tutorials when it comes to using these devices using the ColorOS as it seems as if it was meant for Chinese use only.
I was finally able to get my watch paired with my phone using the steps below.
1. Install the Samsung Health app from the play store
2. Download an old version of Galaxy wearable app and Galaxy watch4 plugin from apkmirror ( I used versions from December 2021)
3. Pair the watch using Samsung Health by opening the app. Click the 3 dot menu and go to settings>Accessories>Scan for accessories. Once paired it will automatically open the galaxy wear app.
4. Close the galaxy wear app and disable wifi and data on the phone.
5. Open the galaxy wear app again and proceed with the setup but decline all options that require you to sign on the watch with Samsung or Google and proceed by allowing the required permissions.
6. That's it, you should now be paired with your watch and you can now sign into your Samsung account through the wearable app and perform a backup/restore if you like,
Hope this helps anyone out there. This was a real pain in the but for me as I find ColorOS to be more reliable than the mess that OxygenOS is since it's now a fork of ColorOS.
My next task is to find out how to get the Google Backup to work. If anyone has any information on this please let me know.
Click to expand...
Click to collapse
it didn't work in my case